RE: trying to test ISDN [7:45786]
BRI0: Dialing cause ip (s=10.3.101.13, d=224.0.0.10) BRI0: Already 255 call(s) in progress on BRI0, dialing not allowed I have never seen this msg before. Anyone know what this means? Is there a loop somewhere? I would guess that you have EIGRP running seeing as that is the multicast address for EIGRP (or is that IGRP??!!) The number of calls IN PROGRESS for the interface is set to a maximum of 255, and hence you've reached that number. You need to filter or do the appropriate control to stop EIGRP from bringing up that dialer interface! You might want to start here: http://www.cisco.com/warp/public/471/ Good Luck! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45790t=45786 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: trying to test ISDN [7:45786]
Yes, we are running EIGRP, and someone put in an permit any any statement in. I removed that but ISDN is still not dialing. if i look at the history, it shows it has dialed successfully a few weeks ago. The IOS is 11.2(5)P so i cannot force a call to test connectivity with the carrier switch. layer 1 is active, spids are assigned, Im pretty much at a loss. The person on the other end did say that on the external NT1 the LP LED was lit. I will follow through with the carrier. Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45794t=45786 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: trying to test ISDN [7:45786]
what about a passive interface for eigrp for your bri0, maybe use a floating static if its an option to dial your remote end Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45796t=45786 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: trying to test ISDN [7:45786]
WE have serveral branches that have passive int on the bri0 and we do use floating static routes. What i ended up doing was removing the config from the bri, reloading the router, entered the switch type and spids and it dialed fine. Thanks all for the suggestions. James Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45800t=45786 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
