the summary-address command is for summarization of routes *into* OSPF (at
an ASBR).
If you want to summarize *out of* OSPF, you'll need to dig a little deeper.
Hint 1: consider configuring your summary route using the target routing
protocol instead of the source routing protocol
Hint 2: Get a copy of Jeff Doyle's Routing TCP/IP Volume 1 for in-depth
treatment of redistribution, especially the metric matching between
protocols
-e-
- Original Message -
From: Richard Botham
To:
Sent: Friday, August 17, 2001 5:11 AM
Subject: ospf summary address issue [7:16357]
Hi All,
I have the following addresses 152.1.1.65/32 152.1.1.97/27 152.1.1.72/32
152.1.1.69/32 152.1.2.2/30 and have created 2 summary addresses of
152.1.1.0
/24 and 152.1.2.0/24 so that i can redistribute them into an igrp process
that is addressed with a 24bit mask. The summary routes appear when I use
show ip ospf summary-address, they do not appear in ospf routing table and
are not redistributed into igrp. Is this because the routes that make up
the
summary have a longer mask than the summary and therefore not entered into
the ospf routing table
Any thoughts appreciated
Richard
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=16387t=16357
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]