Two subnets on the same wire. Secondary address in place, but router not
routing. Hmm. Assuming that Ip routing is enabled, Is there a route to the
two subnets in the routing table? Do the hosts have a Default Gateway set?
Original Message Follows
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: RE: secondary interface command not working
Date: Wed, 27 Sep 2000 16:55:28 EDT
I need to route to a subnet wich is other than the one I'm using on my Fast
Ether Port. I have tryed coniguration below but can not ping
152.222.161.254,, Help
ip address 152.222.161.2 255.255.255.0 secondary
ip address 152.222.160.2 255.255.255.0
no ip route-cache
no ip mroute-cache
duplex auto
speed auto
need to get to 152.222.161.254
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]