RE: Router Firewall Config
I agree with Jason. Alternatively, you might also want to use a software base firewall like Black Ice defender or Zone Alarm. Both are excellent products and Zone Alarm is free for home use. www.zonealarm.com FYI - I don't work for either companies. Also since this is a cisco group forum you might go ahead and use the router as a firewall with a good access list and CBAC. Just my $0.02 CDN Rgds, Manolito -Original Message- From: Jason Roysdon [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 29, 2000 11:23 PM To: [EMAIL PROTECTED] Subject: Re: Router Firewall Config 1605R w/ IP PLUS FW works great for me at home doing exactly what you're asking. Actually, I run IP PLUS FW/IPSEC56 and have a VPN tunnel into my office. The nice thing about IOS for FW/NAT is that you can do port redirection, while the PIX cannot (only Public IP to Private IP). So, with a single IP, I could have a ton of services running on any number of servers (one per port if I like, and multiple per port as well), while I can still telnet to my router on port 23. -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ ""A.Strobel"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I have a cable connection to the Internet with one static IP and I am running a webserver as well. For security, I would like to use a Cisco router as a firewall. Has anyone implemented such a setup? Will a router with two Ethernet interfaces cut it? I would appreciate if you could share your (masked) configuration. I found this link on CCO http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/cs003.htm but it is calling for and additional serial interface and more than one static IP. Any input highly appreciated. A. Strobel Get free email and a permanent address at http://www.amexmail.com/?A=1 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Router Firewall Config
I have a cable connection to the Internet with one static IP and I am running a webserver as well. For security, I would like to use a Cisco router as a firewall. Has anyone implemented such a setup? Will a router with two Ethernet interfaces cut it? I would appreciate if you could share your (masked) configuration. I found this link on CCO http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/cs003.htm but it is calling for and additional serial interface and more than one static IP. Any input highly appreciated. A. Strobel Get free email and a permanent address at http://www.amexmail.com/?A=1 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Router Firewall Config
1605R w/ IP PLUS FW works great for me at home doing exactly what you're asking. Actually, I run IP PLUS FW/IPSEC56 and have a VPN tunnel into my office. The nice thing about IOS for FW/NAT is that you can do port redirection, while the PIX cannot (only Public IP to Private IP). So, with a single IP, I could have a ton of services running on any number of servers (one per port if I like, and multiple per port as well), while I can still telnet to my router on port 23. -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ ""A.Strobel"" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I have a cable connection to the Internet with one static IP and I am running a webserver as well. For security, I would like to use a Cisco router as a firewall. Has anyone implemented such a setup? Will a router with two Ethernet interfaces cut it? I would appreciate if you could share your (masked) configuration. I found this link on CCO http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/cs003.htm but it is calling for and additional serial interface and more than one static IP. Any input highly appreciated. A. Strobel Get free email and a permanent address at http://www.amexmail.com/?A=1 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]