Re: Topology Services in CiscoWorks2000
Do you have "Jump Router Boundaries" enabled? Also make sure you have the correct SNMP communities strings installed. What does CiscoView show? This will help in troubleshooting if it is an SNMP problem or not. Paul Borghese - Original Message - From: "Cisco_whizz" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, January 06, 2001 2:33 PM Subject: Topology Services in CiscoWorks2000 Hello Everyone, I recently installed CiscoWorks2000 on a network comprising of Catalyst 4908 and 3500XL. However the campus manager is displaying all the Cisco devices in the unconnected devices view only and in Resource manager essentials as generic SNMP devices . does anyone have any ideas Kindly reply to my address.Iis version 3.1 in CW2K and the switch is running ios ver 12.0 Regards Get free email and a permanent address at http://www.netaddress.com/?N=1 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Topology Services in CiscoWorks2000
Hello Everyone, I recently installed CiscoWorks2000 on a network comprising of Catalyst 4908 and 3500XL. However the campus manager is displaying all the Cisco devices in the unconnected devices view only and in Resource manager essentials as generic SNMP devices . does anyone have any ideas Kindly reply to my address.Iis version 3.1 in CW2K and the switch is running ios ver 12.0 Regards Get free email and a permanent address at http://www.netaddress.com/?N=1 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Topology Services in CiscoWorks2000
Hello Everyone, I recently installed CiscoWorks2000 on a network comprising of Catalyst 4908 and 3500XL. However the campus manager is displaying all the Cisco devices in the unconnected devices view only and in Resource manager essentials as generic SNMP devices . does anyone have any ideas Kindly reply to my address.Iis version 3.1 in CW2K and the switch is running ios ver 12.0 Regards You'll need to get the latest version of CW2000 CD One Edition 3 and RME 3.2 which was released in October. This is where support for these devices was added, although support for the 3500XL with Inline Power is still not included. David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]