What billing system are you using? Is it based on the PSTN Switches or do you use Radius accounting?
cheers Pat ""Chong Chun Wei (Central)"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all, > Pls help. > > Scenario: > > 2 AS 5300 acting as the originating and terminating gateway on each > side of the network. The originating AS5300 is connected to the PSTN switch > ( SW A ) using PRI signaling while the terminating AS 5300 is connected to > the PSTN switch ( SW B) using R2 signaling. The customer will dial a > specific number to access the SW A and then enter the account and pin > number. After the authentication, there will a beep tone follow by the > message which prompt the user to enter the destination phone number. > > > For a normal scenario, > > After the entering of the destination phone number, there will be ringing > tone. When B-party picked up the phone, there will be a second beep tone > which will trigger the billing system to start the billing. > > However, what actually happens is that, > > After the entering of the destination phone number, just right before the > ringing tone, there is a "click" sound immediately before the ringing tone > which undesirably, trigger the billing system. This creates problem because > even before the call get connected, the customer has already been charged. > > The Attempted Solutions include > 1. Program the progress indicator at the terminating gateway's dial-peer > 2. check the output of the "debug isdn a931" (looks fine) > > However, the problem still haven't been solved. Please help. > > rgds > Alvin Chong > CCNA Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28273&t=28273 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
