bridging between Ethernet and FDDI [7:38533]
Hi folks, Assuming that there are 2 bridges and configured as follows. Ethernet Host.A -- Bridge#1 --- FDDI --- Bridge#2 -- Ethernet host.B There are 3 hosts : Host A (ethernet host in left) Host B (ethernet host in right) Host C (FDDI host in fddi segment of middle) Host A, B, and C hosts can communicate each other? if so, how to configure two briges, translational bridge or others? Thanks, Sam. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38533&t=38533 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: bridging between Ethernet and FDDI [7:38533]
For some reason that I don't recall I had to do somthing similiar several years ago. The bridges were AGS routers. I simply disabled routing and put a bridge group on the interfaces. You give all the interface on a single router the same IP address so that you can connect to it. Dave Hwang Samuel wrote: > Hi folks, > > Assuming that there are 2 bridges and configured as follows. > > Ethernet Host.A -- Bridge#1 --- FDDI --- Bridge#2 -- Ethernet host.B > > There are 3 hosts : >Host A (ethernet host in left) >Host B (ethernet host in right) >Host C (FDDI host in fddi segment of middle) > > Host A, B, and C hosts can communicate each other? > > if so, how to configure two briges, translational bridge or others? > > Thanks, > > Sam. -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications Inc. 612-664-3367 [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38565&t=38533 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: bridging between Ethernet and FDDI [7:38533]
The Cat5K series of switches have FDDI cards and Ethernet cards. The only examples that I have seen show the FDDI used as a trunk to connect switches to other switches or routers. That was from the old switching course CLSC. At one time Cisco had that CIM available for access at a web site at no charge. It might still be out there. Let us know if you are successful. > -Original Message- > From: Hwang Samuel [mailto:[EMAIL PROTECTED]] > Sent: Saturday, March 16, 2002 4:28 AM > To: [EMAIL PROTECTED] > Subject: bridging between Ethernet and FDDI [7:38533] > > > Hi folks, > > Assuming that there are 2 bridges and configured as follows. > > Ethernet Host.A -- Bridge#1 --- FDDI --- Bridge#2 -- Ethernet host.B > > There are 3 hosts : >Host A (ethernet host in left) >Host B (ethernet host in right) >Host C (FDDI host in fddi segment of middle) > > Host A, B, and C hosts can communicate each other? > > if so, how to configure two briges, translational bridge or others? > > Thanks, > > Sam. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38582&t=38533 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: bridging between Ethernet and FDDI [7:38533]
I made sense as I have stuied regarding the encapsulation bridge and translational bridge. Thanks all. Samuel. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38737&t=38533 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
