Re: point-to-point subinterface [7:37831]
Hi, Is there already a s0.1 interface defined? Try creating a s0.2 or something that doesn't exist. Once you create a sub-interface you can't change it from multipoint to point-to-point and vice versa. Also, if you remove sub interfaces they aren't completely removed from memory until the router is reloaded/reset. Perhaps, you deleted the s0.1 interface and are running into this. HTH, Erick --- Richard Yun wrote: > Hello, > > I'm trying to create a point-to-point subinterface > under s0 inteface and I'm > getting the following warning message: > > interface Serial0 > no ip address > encapsulation frame-relay > no ip route-cache > no ip mroute-cache > no fair-queue > clockrate 200 > r1(config)#int s0.1 point > % Warning: cannot change link type > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Try FREE Yahoo! Mail - the world's greatest free email! http://mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37835&t=37831 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: point-to-point subinterface [7:37831]
At some point since the last time you rebooted this router, you must have configured the same subinterface as multipoint. Either choose a different subinterface number or remove the subinterface and reboot the router. That will allow you to use the same number with a different link type. HTH, John On Mon, 11 Mar 2002, Richard Yun ([EMAIL PROTECTED]) wrote: > Hello, > > I'm trying to create a point-to-point subinterface under s0 inteface and > I'm > getting the following warning message: > > interface Serial0 > no ip address > encapsulation frame-relay > no ip route-cache > no ip mroute-cache > no fair-queue > clockrate 200 > r1(config)#int s0.1 point > % Warning: cannot change link type > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37834&t=37831 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
point-to-point subinterface [7:37831]
Hello, I'm trying to create a point-to-point subinterface under s0 inteface and I'm getting the following warning message: interface Serial0 no ip address encapsulation frame-relay no ip route-cache no ip mroute-cache no fair-queue clockrate 200 r1(config)#int s0.1 point % Warning: cannot change link type FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
