HI mates, Putting my fibre GBIC commands in, line by line for something to do. Got a hitch already. I have so far, got int giga 2/1 & 2/2 as trunks using the command in the subject line. I try to do that further, however the command is not avaliabe from any other ports in the fibre blade. Can only 2 ports on the fibre gbic blade be trunks at anny one time ? Surely not. Do I need to specify different native parameters, so a trunk link is part of a different vlan ? What am I missing here ? interface GigabitEthernet2/1 switchport trunk encapsulation dot1q switchport mode trunk description Trunk to Switch l15_sw1 no snmp trap link-status ! interface GigabitEthernet2/2 switchport trunk encapsulation dot1q switchport mode trunk description Trunk Link to l15_sw2 no snmp trap link-status ! interface GigabitEthernet2/3 description Trunk Link to l15_sw3 no snmp trap link-status ! jb
********************************************************************** visit http://www.solution6.com UK Customers - http://www.solution6.co.uk ********************************************************************* This email message (and attachments) may contain information that is confidential to Solution 6. If you are not the intended recipient you cannot use, distribute or copy the message or attachments. In such a case, please notify the sender by return email immediately and erase all copies of the message and attachments. Opinions, conclusions and other information in this message and attachments that do not relate to the official business of Solution 6 are neither given nor endorsed by it. ********************************************************************* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55518&t=55518 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]