Well
to enable the x25 on your router, you need
int s 0
encap x25
if the stock exchange provide ip address, then
int s 0
encap x25
ip address A.B.C.E 255.
and forward it to ethernet interface
int e 0
ip address X.Y.Z.Z
then you can enable any routing protocol that you want
like RIP,
router Rip
network A.B...
network X.Y
Sam
- Original Message -
From: "eric^_^" [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]; "charlesw" [EMAIL PROTECTED]
Cc: "Fong Kwok Wai Alvin" [EMAIL PROTECTED]
Sent: Friday, January 05, 2001 12:26 AM
Subject: x.25 stock exchange system.
Dear All :
I need connect to x.25 stock exchange system.
But, I don't know how to connect it with following limit information.
And then, How to config our cisco 2610 recervie the x.25 packet and
forward the
packet to (IP)ethernet interface .
(remark : no any config in router include pvc./ x.121 address..etc/ from
stock operation
staff, ?? PnP ?)
*
communication line speed : 128 K
comm pro : X.25 on a leased line
re-transmit time-out (t) : 3 sec
re-transmit limit (N2) : 10
frame windows size : 7
X.25 interface
x.25 type : x.25(1984)
interface(L2/L3) : DTE
Windows size(default) : 7
packet (default) : 1024
* x.25 will provide a low level polling mechanism.
This form of poling will allow any disconnection of
information Vendors to be detected by market datafeed system.
Many thanks ^_^
_
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
