subject:"\[c\-nsp\] Nexus N7K\-M132XP\-12 powerup"

Re: [c-nsp] Nexus N7K-M132XP-12 powerup

2011-06-12 Thread Nitzan Tzelniker

check the source ip/copp and try ftp becouse its large files that couse some
problems in tftp

BTW

I didnt find a way to configure source ip for ftp/tftp trafic like "ip ftp
source-interface " in IOS

Nitzan

On Sun, Jun 12, 2011 at 23:35, Renelson Panosky wrote:

> Tim
>
> Thank you for the tip.  I actually took your advice and try to upload the
> new version 5.1(3)
>
> but  I keep getting this crazy error: TFTP get operation failed:connection
> timed out.
>
> I can ping my TFTP server from the switch and i can ping the switch so i
> know i have two way communication.  Have Anyone of you guys ran into this
> situation or any other machine?
>
>
> On Sat, Jun 11, 2011 at 5:41 PM, Tim Stevenson  wrote:
>
> > Hi Renelson,
> >
> > My first suspicion would be that these are in fact N7K-M132XP-12L cards
> > (note the trailing "L"). The "L" version of this card is only supported
> from
> > 5.1, I'd recommend 5.1(3).
> >
> > Otherwise, I'd open a TAC case, as support for the non-L version is there
> > from day 1.
> >
> > Hope that helps,
> > Tim
> >
> > At 01:39 PM 6/11/2011, Renelson Panosky pronounced:
> >
> >   I am working on a N7K with two of the above cards.  they're showing
> >> power
> >> down and everytime i tried to power them back up i got the following
> >> errors.
> >>
> >> switch(config)# 2011 Jun 12 01:22:36 switch %$ VDC-1 %$
> >> %PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of Module 7  from
> Command
> >> Line Interface
> >> 2011 Jun 12 01:22:39 switch %$ VDC-1 %$
> >> %PLATFORM-2-MOD_PWRIDPROM_SW_CARD_ID_UNKNOWN: Module 7 failed to power
> up.
> >> (Unknown card. Could not get software-card-id)
> >>
> >> I am running Software version 5.0 (2a) and i moved one the card in slot
> 7
> >> and still getting the same error.
> >>
> >>
> >>  sho mod
> >> Mod  Ports  Module-Type  Model  Status
> >> ---  -   --
> >> 
> >> 10  Unknown Module
>  powered-dn
> >> 248 10/100/1000 Mbps Ethernet Module N7K-M148GT-11  ok
> >> 348 10/100/1000 Mbps Ethernet Module N7K-M148GT-11  ok
> >> 50  Supervisor module-1X N7K-SUP1   active *
> >> 60  Supervisor module-1X N7K-SUP1
> ha-standby
> >> 70  Unknown Module
>  powered-dn
> >> Mod  Power-Status  Reason
> >> ---    ---
> >> 1powered-dn Unknown card (Could not get software-card-id)
> >> 7powered-dn Unknown card (Could not get software-card-id)
> >> Mod  Sw  Hw
> >> ---  --  --
> >> 25.0(2a) 1.7
> >> 35.0(2a) 1.7
> >> 55.0(2a) 1.8
> >> 65.0(2a) 1.8
> >>
> >> Mod  MAC-Address(es) Serial-Num
> >> ---  --  --
> >> 250-3d-e5-b3-35-5c to 50-3d-e5-b3-35-90  JAF1502BDGH
> >> 350-3d-e5-b9-81-a0 to 50-3d-e5-b9-81-d4  JAF1502BDGF
> >> 510-8c-cf-1d-e5-d0 to 10-8c-cf-1d-e5-d8  JAF1453BKBK
> >> 68c-b6-4f-e8-ee-60 to 8c-b6-4f-e8-ee-68  JAF1453BKCF
> >> Mod  Online Diag Status
> >> ---  --
> >> 2Pass
> >> 3Pass
> >> 5Pass
> >> 6Pass
> >> Xbar Ports  Module-Type  Model  Status
> >> ---  -   --
> >> 
> >> 10  Fabric Module 1  N7K-C7010-FAB-1ok
> >> 20  Fabric Module 1  N7K-C7010-FAB-1ok
> >> 30  Fabric Module 1  N7K-C7010-FAB-1ok
> >> Xbar Sw  Hw
> >> ---  --  --
> >> 1NA  1.1
> >> 2NA  1.1
> >> 3NA  1.1
> >>
> >> Xbar MAC-Address(es) Serial-Num
> >> ---  --  --
> >> 1NA  JAF1453BPHE
> >> 2NA  JAF1453BPHH
> >> 3NA  JAF1453BPAP
> >> ___
> >> cisco-nsp mailing list  cisco-nsp@puck.nether.net
> >> 
> >> https://puck.nether.net/mailman/listinfo/cisco-nsp
> >> archive at 
> >> http://puck.nether.net/pipermail/cisco-nsp/
> >>
> >
> >
> >
> >
> > Tim Stevenson, tstev...@cisco.com
> > Routing & Switching CCIE #5561
> > Distinguished Technical Marketing Engineer, Cisco Nexus 7000
> > Cisco - http://www.cisco.com
> > IP Phone: 408-526-6759
> > 
> > The contents of this message may be *Cisco Confidential*
> > and are intended for the specified recipients only.
> >
> >
> >
> ___
> cisco-nsp mailing list  cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://pu

Re: [c-nsp] Nexus N7K-M132XP-12 powerup

2011-06-12 Thread Renelson Panosky

Tim

Thank you for the tip.  I actually took your advice and try to upload the
new version 5.1(3)

but  I keep getting this crazy error: TFTP get operation failed:connection
timed out.

I can ping my TFTP server from the switch and i can ping the switch so i
know i have two way communication.  Have Anyone of you guys ran into this
situation or any other machine?


On Sat, Jun 11, 2011 at 5:41 PM, Tim Stevenson  wrote:

> Hi Renelson,
>
> My first suspicion would be that these are in fact N7K-M132XP-12L cards
> (note the trailing "L"). The "L" version of this card is only supported from
> 5.1, I'd recommend 5.1(3).
>
> Otherwise, I'd open a TAC case, as support for the non-L version is there
> from day 1.
>
> Hope that helps,
> Tim
>
> At 01:39 PM 6/11/2011, Renelson Panosky pronounced:
>
>   I am working on a N7K with two of the above cards.  they're showing
>> power
>> down and everytime i tried to power them back up i got the following
>> errors.
>>
>> switch(config)# 2011 Jun 12 01:22:36 switch %$ VDC-1 %$
>> %PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of Module 7  from Command
>> Line Interface
>> 2011 Jun 12 01:22:39 switch %$ VDC-1 %$
>> %PLATFORM-2-MOD_PWRIDPROM_SW_CARD_ID_UNKNOWN: Module 7 failed to power up.
>> (Unknown card. Could not get software-card-id)
>>
>> I am running Software version 5.0 (2a) and i moved one the card in slot 7
>> and still getting the same error.
>>
>>
>>  sho mod
>> Mod  Ports  Module-Type  Model  Status
>> ---  -   --
>> 
>> 10  Unknown Module  powered-dn
>> 248 10/100/1000 Mbps Ethernet Module N7K-M148GT-11  ok
>> 348 10/100/1000 Mbps Ethernet Module N7K-M148GT-11  ok
>> 50  Supervisor module-1X N7K-SUP1   active *
>> 60  Supervisor module-1X N7K-SUP1   ha-standby
>> 70  Unknown Module  powered-dn
>> Mod  Power-Status  Reason
>> ---    ---
>> 1powered-dn Unknown card (Could not get software-card-id)
>> 7powered-dn Unknown card (Could not get software-card-id)
>> Mod  Sw  Hw
>> ---  --  --
>> 25.0(2a) 1.7
>> 35.0(2a) 1.7
>> 55.0(2a) 1.8
>> 65.0(2a) 1.8
>>
>> Mod  MAC-Address(es) Serial-Num
>> ---  --  --
>> 250-3d-e5-b3-35-5c to 50-3d-e5-b3-35-90  JAF1502BDGH
>> 350-3d-e5-b9-81-a0 to 50-3d-e5-b9-81-d4  JAF1502BDGF
>> 510-8c-cf-1d-e5-d0 to 10-8c-cf-1d-e5-d8  JAF1453BKBK
>> 68c-b6-4f-e8-ee-60 to 8c-b6-4f-e8-ee-68  JAF1453BKCF
>> Mod  Online Diag Status
>> ---  --
>> 2Pass
>> 3Pass
>> 5Pass
>> 6Pass
>> Xbar Ports  Module-Type  Model  Status
>> ---  -   --
>> 
>> 10  Fabric Module 1  N7K-C7010-FAB-1ok
>> 20  Fabric Module 1  N7K-C7010-FAB-1ok
>> 30  Fabric Module 1  N7K-C7010-FAB-1ok
>> Xbar Sw  Hw
>> ---  --  --
>> 1NA  1.1
>> 2NA  1.1
>> 3NA  1.1
>>
>> Xbar MAC-Address(es) Serial-Num
>> ---  --  --
>> 1NA  JAF1453BPHE
>> 2NA  JAF1453BPHH
>> 3NA  JAF1453BPAP
>> ___
>> cisco-nsp mailing list  cisco-nsp@puck.nether.net
>> 
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at 
>> http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>
>
>
> Tim Stevenson, tstev...@cisco.com
> Routing & Switching CCIE #5561
> Distinguished Technical Marketing Engineer, Cisco Nexus 7000
> Cisco - http://www.cisco.com
> IP Phone: 408-526-6759
> 
> The contents of this message may be *Cisco Confidential*
> and are intended for the specified recipients only.
>
>
>
___
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Re: [c-nsp] Nexus N7K-M132XP-12 powerup

2011-06-11 Thread Tim Stevenson


Hi Renelson,

My first suspicion would be that these are in fact N7K-M132XP-12L 
cards (note the trailing "L"). The "L" version of this card is only 
supported from 5.1, I'd recommend 5.1(3).


Otherwise, I'd open a TAC case, as support for the non-L version is 
there from day 1.


Hope that helps,
Tim

At 01:39 PM 6/11/2011, Renelson Panosky pronounced:


I am working on a N7K with two of the above cards.  they're showing power
down and everytime i tried to power them back up i got the following
errors.

switch(config)# 2011 Jun 12 01:22:36 switch %$ VDC-1 %$
%PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of Module 7  from Command
Line Interface
2011 Jun 12 01:22:39 switch %$ VDC-1 %$
%PLATFORM-2-MOD_PWRIDPROM_SW_CARD_ID_UNKNOWN: Module 7 failed to power up.
(Unknown card. Could not get software-card-id)

I am running Software version 5.0 (2a) and i moved one the card in slot 7
and still getting the same error.


 sho mod
Mod  Ports  Module-Type  Model  Status
---  -   -- 
10  Unknown Module  powered-dn
248 10/100/1000 Mbps Ethernet Module N7K-M148GT-11  ok
348 10/100/1000 Mbps Ethernet Module N7K-M148GT-11  ok
50  Supervisor module-1X N7K-SUP1   active *
60  Supervisor module-1X N7K-SUP1   ha-standby
70  Unknown Module  powered-dn
Mod  Power-Status  Reason
---    ---
1powered-dn Unknown card (Could not get software-card-id)
7powered-dn Unknown card (Could not get software-card-id)
Mod  Sw  Hw
---  --  --
25.0(2a) 1.7
35.0(2a) 1.7
55.0(2a) 1.8
65.0(2a) 1.8

Mod  MAC-Address(es) Serial-Num
---  --  --
250-3d-e5-b3-35-5c to 50-3d-e5-b3-35-90  JAF1502BDGH
350-3d-e5-b9-81-a0 to 50-3d-e5-b9-81-d4  JAF1502BDGF
510-8c-cf-1d-e5-d0 to 10-8c-cf-1d-e5-d8  JAF1453BKBK
68c-b6-4f-e8-ee-60 to 8c-b6-4f-e8-ee-68  JAF1453BKCF
Mod  Online Diag Status
---  --
2Pass
3Pass
5Pass
6Pass
Xbar Ports  Module-Type  Model  Status
---  -   -- 
10  Fabric Module 1  N7K-C7010-FAB-1ok
20  Fabric Module 1  N7K-C7010-FAB-1ok
30  Fabric Module 1  N7K-C7010-FAB-1ok
Xbar Sw  Hw
---  --  --
1NA  1.1
2NA  1.1
3NA  1.1

Xbar MAC-Address(es) Serial-Num
---  --  --
1NA  JAF1453BPHE
2NA  JAF1453BPHH
3NA  JAF1453BPAP
___
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at 
http://puck.nether.net/pipermail/cisco-nsp/





Tim Stevenson, tstev...@cisco.com
Routing & Switching CCIE #5561
Distinguished Technical Marketing Engineer, Cisco Nexus 7000
Cisco - http://www.cisco.com
IP Phone: 408-526-6759

The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.


___
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

[c-nsp] Nexus N7K-M132XP-12 powerup

2011-06-11 Thread Renelson Panosky

I am working on a N7K with two of the above cards.  they're showing power
down and everytime i tried to power them back up i got the following
errors.

switch(config)# 2011 Jun 12 01:22:36 switch %$ VDC-1 %$
%PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of Module 7  from Command
Line Interface
2011 Jun 12 01:22:39 switch %$ VDC-1 %$
%PLATFORM-2-MOD_PWRIDPROM_SW_CARD_ID_UNKNOWN: Module 7 failed to power up.
(Unknown card. Could not get software-card-id)

I am running Software version 5.0 (2a) and i moved one the card in slot 7
and still getting the same error.


 sho mod
Mod  Ports  Module-Type  Model  Status
---  -   -- 
10  Unknown Module  powered-dn
248 10/100/1000 Mbps Ethernet Module N7K-M148GT-11  ok
348 10/100/1000 Mbps Ethernet Module N7K-M148GT-11  ok
50  Supervisor module-1X N7K-SUP1   active *
60  Supervisor module-1X N7K-SUP1   ha-standby
70  Unknown Module  powered-dn
Mod  Power-Status  Reason
---    ---
1powered-dn Unknown card (Could not get software-card-id)
7powered-dn Unknown card (Could not get software-card-id)
Mod  Sw  Hw
---  --  --
25.0(2a) 1.7
35.0(2a) 1.7
55.0(2a) 1.8
65.0(2a) 1.8

Mod  MAC-Address(es) Serial-Num
---  --  --
250-3d-e5-b3-35-5c to 50-3d-e5-b3-35-90  JAF1502BDGH
350-3d-e5-b9-81-a0 to 50-3d-e5-b9-81-d4  JAF1502BDGF
510-8c-cf-1d-e5-d0 to 10-8c-cf-1d-e5-d8  JAF1453BKBK
68c-b6-4f-e8-ee-60 to 8c-b6-4f-e8-ee-68  JAF1453BKCF
Mod  Online Diag Status
---  --
2Pass
3Pass
5Pass
6Pass
Xbar Ports  Module-Type  Model  Status
---  -   -- 
10  Fabric Module 1  N7K-C7010-FAB-1ok
20  Fabric Module 1  N7K-C7010-FAB-1ok
30  Fabric Module 1  N7K-C7010-FAB-1ok
Xbar Sw  Hw
---  --  --
1NA  1.1
2NA  1.1
3NA  1.1

Xbar MAC-Address(es) Serial-Num
---  --  --
1NA  JAF1453BPHE
2NA  JAF1453BPHH
3NA  JAF1453BPAP
___
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Re: [c-nsp] Nexus N7K-M132XP-12 powerup

Re: [c-nsp] Nexus N7K-M132XP-12 powerup

Re: [c-nsp] Nexus N7K-M132XP-12 powerup

[c-nsp] Nexus N7K-M132XP-12 powerup

4 matches

Site Navigation

Mail list logo

Footer information