date:20140307

[cisco-voip] 3750 QoS

2014-03-07 Thread Jason Aarons (AM)

Without 'mls qos trust device cisco-phone' this port is not going to match the 
service-policy.   Correct?  In short I believe this QoS config is wrong.

3750#show run int fa1/0/43
interface FastEthernet1/0/43
switchport access vlan 10
switchport mode access
switchport voice vlan 20
storm-control broadcast level 10.00 5.00
storm-control action shutdown
storm-control action trap
spanning-tree portfast
service-policy input CISCOVOIPVIDEO


class-map match-all VOICE(46)
match ip dscp ef
class-map match-all SOFTPHONE(24)
match ip dscp cs3
class-map match-all VIDEO(34)
match ip dscp af41
!
!
policy-map CISCOVOIPVIDEO
class VIDEO(34)
  set ip dscp af41
class SOFTPHONE(24)
  set ip dscp cs3
class VOICE(46)
  set ip dscp ef


Reference
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/91862-cat3750-qos-config.html


___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] CRS Editor not connecting to IPIVR

2014-03-07 Thread James Buchanan

Have you tried disabling Windows Firewall?


On Fri, Mar 7, 2014 at 11:01 PM, Ryan Burtch  wrote:

> All:
>
> I am trying to connect to an IPIVR server from CRS editor on windows XP,
> but everytime I try to login, it looks like its going to connect me and
> then CRS editor shuts down.  I'm able to ping the IPIVR server from my XP
> box, so idk what the issue could be.
>
> Here is the error I get in the logs:
>
> java.net.ConnectException: Connection timed out: connect
> java.rmi.ConnectException: Connection refused to host
>
>
>
> Sincerely,
>
> Ryan Burtch
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] CRS Editor not connecting to IPIVR

2014-03-07 Thread Ryan Burtch

All:

I am trying to connect to an IPIVR server from CRS editor on windows XP,
but everytime I try to login, it looks like its going to connect me and
then CRS editor shuts down.  I'm able to ping the IPIVR server from my XP
box, so idk what the issue could be.

Here is the error I get in the logs:

java.net.ConnectException: Connection timed out: connect
java.rmi.ConnectException: Connection refused to host



Sincerely,

Ryan Burtch
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] ip phone services

2014-03-07 Thread Scott Voll

go to https://ip_add_of_Pub/car

This will be your Call detail reporting.  you should be able to enter the
extension and dates and put up the reports.  it should give you duration
among other things.

Scott



On Fri, Mar 7, 2014 at 10:40 AM, Katherine Dupree <
kdup...@randolphcollege.edu> wrote:

>  I am trying to find a report that will show the placed calls from
> certain extensions.  There is a directory on the physical phone, place
> calls but is there a way to get a report from Call Manager 8.6?  Thanks so
> much for any help you can give me.  Also, would this report show duration
> of the call?  Thanks,
>
>
>
>
>
> Katherine Dupree
>
> Telecommunications/User Support Analyst
>
> Office: (434) 947-8371
>
> kdup...@randolphcollege.edu
>
>
>
> *Randolph College*
>
> *Founded as Randolph-Macon Woman's College in 1891*
>
> 2500 Rivermont Avenue
>
> Lynchburg, VA 24503
>
> www.randolphcollege.edu
>
>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
<>___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] ip phone services

2014-03-07 Thread Katherine Dupree

I am trying to find a report that will show the placed calls from certain 
extensions.  There is a directory on the physical phone, place calls but is 
there a way to get a report from Call Manager 8.6?  Thanks so much for any help 
you can give me.  Also, would this report show duration of the call?  Thanks,


Katherine Dupree
Telecommunications/User Support Analyst
Office: (434) 947-8371
kdup...@randolphcollege.edu

[cid:image002.jpg@01CF3A0A.D76099F0]Randolph College
Founded as Randolph-Macon Woman's College in 1891
2500 Rivermont Avenue
Lynchburg, VA 24503
www.randolphcollege.edu

<><>___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

2014-03-07 Thread Ryan Ratliff (rratliff)

Have you looked at the SRND yet?  
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/netstruc.html

Start there and look at the QoS configuration for video.  You'll need to do 
some analysis on the traffic going over those pipes to understand why your 
video calls are suffering.  Two 384k video calls is going to end up consuming 
almost 70% of your available bandwidth.  Is your QoS configured to handle this 
or are those calls going to compete with all of the other traffic going to the 
branch that isn't voice or video related?

-Ryan

On Mar 7, 2014, at 12:14 PM, Mohammed Irshad  
wrote:

Thanks 

Well I have two 1 mb links with load sharing, but I would like to know the
best practice to implement the same. As of right now I have intra-region
codec as g711 and inter-region g729 with no locations set.

Regards
Irshad

-Original Message-
From: Heim, Dennis [mailto:dennis.h...@wwt.com] 
Sent: Friday, March 07, 2014 7:55 PM
To: Mohammed Irshad; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

I am going to say that you probably need more than a 1Mb pipe to your
remotes to seriously consider a discussion on video.

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.


-Original Message-
From: Mohammed Irshad [mailto:mohammed.irs...@outlook.com]
Sent: Friday, March 07, 2014 10:25 AM
To: Heim, Dennis; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Yes. I have Cisco 8945 Phones at HQ  as well as at Branch Offices.

Regards
Irshad

-Original Message-
From: Heim, Dennis [mailto:dennis.h...@wwt.com]
Sent: Friday, March 07, 2014 7:16 PM
To: Mohammed Irshad; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Is all your voice and video registered to CUCM?

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.


-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Mohammed Irshad
Sent: Friday, March 07, 2014 9:31 AM
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Dear All,


I have centralize CUCM Cluster with 40+ Branches with their respective
Branch DP's & regions  using g729 Codec  default video bit codec i.e. 384
and the  Cisco IP Phones  8945 register to CUCM cluster using WAN 1mb MPLS
link, when I have 2 video calls at the same time  between Branch and HQ
video  is getting distorted, please help what should I do.

Regards
Irshad

-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
cisco-voip-requ...@puck.nether.net
Sent: Thursday, March 06, 2014 8:00 PM
To: cisco-voip@puck.nether.net
Subject: cisco-voip Digest, Vol 125, Issue 5

Send cisco-voip mailing list submissions to
   cisco-voip@puck.nether.net

To subscribe or unsubscribe via the World Wide Web, visit
   https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
   cisco-voip-requ...@puck.nether.net

You can reach the person managing the list at
   cisco-voip-ow...@puck.nether.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of cisco-voip digest..."


Today's Topics:

  1. Re: should I rebuild cluster from scratch after upgrade   from
 v7 to v9? (Heim, Dennis)
  2. Re: Setting up ICM Sprawler 8.x (Pavan K)
  3. Re: should I rebuild cluster from scratch after upgrade   from
 v7 to v9? (Lelio Fulgenzi)
  4. Re: Setting up ICM Sprawler 8.x (Ryan Burtch)
  5. Re: Setting up ICM Sprawler 8.x (Beck, Christopher)
  6. Re: should I rebuild cluster from scratch after   upgrade from
 v7 to v9? (Madziarczyk, Jonathan)
  7. Re: UCCX High CPU & Memory Usage (Anthony Holloway)
  8. Re: should I rebuild cluster from scratch after   upgrade from
 v7 to v9? (Lelio Fulgenzi)
  9. Re: Directory URI in LDAP sync (Anthony Holloway)
 10. FAX and ITSP SIP Trunks and CUBE (Dana Tong)
 11. Re: FAX and ITSP SIP Trunks and CUBE (Jason Aarons (AM))
 12. CUCM 10 Phones (Leslie Meade)
 13. Re: CUCM 10 Phones (James Buchanan)
 14. Re: CUCM 10 Phones (Matthew Collins)
 15. Re: CUCM 10 Phones (Jason Aarons (AM))
 16. Re: CUCM 10 Phones (Daniel Pagan)


--

Message: 1
Date: Wed, 5 Mar 2014 12:37:24 -0600
From: "Heim, Dennis" 
To: Lelio Fulgenzi , cisco-voip voyp list
   
Subject: Re: [cisco-voip] should I rebuild cluster from scratch after
   upgrade from v7 to v9?
Message-ID:
   <0cc57fcab07ceb4595526952471493d360d2283...@prodcms1.wwt.local>
Content-Type: text/plain; charset="utf-8"

Aligned partitions.

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

2014-03-07 Thread Mohammed Irshad

Thanks 

Well I have two 1 mb links with load sharing, but I would like to know the
best practice to implement the same. As of right now I have intra-region
codec as g711 and inter-region g729 with no locations set.

Regards
Irshad

-Original Message-
From: Heim, Dennis [mailto:dennis.h...@wwt.com] 
Sent: Friday, March 07, 2014 7:55 PM
To: Mohammed Irshad; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

I am going to say that you probably need more than a 1Mb pipe to your
remotes to seriously consider a discussion on video.

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.


-Original Message-
From: Mohammed Irshad [mailto:mohammed.irs...@outlook.com]
Sent: Friday, March 07, 2014 10:25 AM
To: Heim, Dennis; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Yes. I have Cisco 8945 Phones at HQ  as well as at Branch Offices.

Regards
Irshad

-Original Message-
From: Heim, Dennis [mailto:dennis.h...@wwt.com]
Sent: Friday, March 07, 2014 7:16 PM
To: Mohammed Irshad; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Is all your voice and video registered to CUCM?

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.


-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Mohammed Irshad
Sent: Friday, March 07, 2014 9:31 AM
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Dear All,


I have centralize CUCM Cluster with 40+ Branches with their respective
Branch DP's & regions  using g729 Codec  default video bit codec i.e. 384
and the  Cisco IP Phones  8945 register to CUCM cluster using WAN 1mb MPLS
link, when I have 2 video calls at the same time  between Branch and HQ
video  is getting distorted, please help what should I do.

Regards
Irshad

-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
cisco-voip-requ...@puck.nether.net
Sent: Thursday, March 06, 2014 8:00 PM
To: cisco-voip@puck.nether.net
Subject: cisco-voip Digest, Vol 125, Issue 5

Send cisco-voip mailing list submissions to
cisco-voip@puck.nether.net

To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
cisco-voip-requ...@puck.nether.net

You can reach the person managing the list at
cisco-voip-ow...@puck.nether.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of cisco-voip digest..."


Today's Topics:

   1. Re: should I rebuild cluster from scratch after upgrade   from
  v7 to v9? (Heim, Dennis)
   2. Re: Setting up ICM Sprawler 8.x (Pavan K)
   3. Re: should I rebuild cluster from scratch after upgrade   from
  v7 to v9? (Lelio Fulgenzi)
   4. Re: Setting up ICM Sprawler 8.x (Ryan Burtch)
   5. Re: Setting up ICM Sprawler 8.x (Beck, Christopher)
   6. Re: should I rebuild cluster from scratch after   upgrade from
  v7 to v9? (Madziarczyk, Jonathan)
   7. Re: UCCX High CPU & Memory Usage (Anthony Holloway)
   8. Re: should I rebuild cluster from scratch after   upgrade from
  v7 to v9? (Lelio Fulgenzi)
   9. Re: Directory URI in LDAP sync (Anthony Holloway)
  10. FAX and ITSP SIP Trunks and CUBE (Dana Tong)
  11. Re: FAX and ITSP SIP Trunks and CUBE (Jason Aarons (AM))
  12. CUCM 10 Phones (Leslie Meade)
  13. Re: CUCM 10 Phones (James Buchanan)
  14. Re: CUCM 10 Phones (Matthew Collins)
  15. Re: CUCM 10 Phones (Jason Aarons (AM))
  16. Re: CUCM 10 Phones (Daniel Pagan)


--

Message: 1
Date: Wed, 5 Mar 2014 12:37:24 -0600
From: "Heim, Dennis" 
To: Lelio Fulgenzi , cisco-voip voyp list

Subject: Re: [cisco-voip] should I rebuild cluster from scratch after
upgrade from v7 to v9?
Message-ID:
<0cc57fcab07ceb4595526952471493d360d2283...@prodcms1.wwt.local>
Content-Type: text/plain; charset="utf-8"

Aligned partitions.

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.


From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Lelio Fulgenzi
Sent: Wednesday, March 05, 2014 10:56 AM
To: cisco-voip voyp list
Subject: [cisco-voip] should I rebuild cluster from scratch after upgrade
from v7 to v9?


I have an opportunity (maybe, if time permits) to rebuild an off-line
cluster after I upgrade it from v7 to v9.

The question is, is there any advantage to building a cluster from scratch
and restore from DRS, so that it is built from v9 installation media rather
than from a v7 upgrade?

I recall seeing a number of bugs in the past that s

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

2014-03-07 Thread Heim, Dennis

I am going to say that you probably need more than a 1Mb pipe to your remotes 
to seriously consider a discussion on video.

Dennis Heim | Solution Architect (Collaboration)
World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.


-Original Message-
From: Mohammed Irshad [mailto:mohammed.irs...@outlook.com]
Sent: Friday, March 07, 2014 10:25 AM
To: Heim, Dennis; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Yes. I have Cisco 8945 Phones at HQ  as well as at Branch Offices.

Regards
Irshad

-Original Message-
From: Heim, Dennis [mailto:dennis.h...@wwt.com]
Sent: Friday, March 07, 2014 7:16 PM
To: Mohammed Irshad; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Is all your voice and video registered to CUCM?

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.


-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
Mohammed Irshad
Sent: Friday, March 07, 2014 9:31 AM
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Dear All,


I have centralize CUCM Cluster with 40+ Branches with their respective Branch 
DP's & regions  using g729 Codec  default video bit codec i.e. 384 and the  
Cisco IP Phones  8945 register to CUCM cluster using WAN 1mb MPLS link, when I 
have 2 video calls at the same time  between Branch and HQ video  is getting 
distorted, please help what should I do.

Regards
Irshad

-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
cisco-voip-requ...@puck.nether.net
Sent: Thursday, March 06, 2014 8:00 PM
To: cisco-voip@puck.nether.net
Subject: cisco-voip Digest, Vol 125, Issue 5

Send cisco-voip mailing list submissions to
cisco-voip@puck.nether.net

To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
cisco-voip-requ...@puck.nether.net

You can reach the person managing the list at
cisco-voip-ow...@puck.nether.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of cisco-voip digest..."


Today's Topics:

   1. Re: should I rebuild cluster from scratch after upgrade   from
  v7 to v9? (Heim, Dennis)
   2. Re: Setting up ICM Sprawler 8.x (Pavan K)
   3. Re: should I rebuild cluster from scratch after upgrade   from
  v7 to v9? (Lelio Fulgenzi)
   4. Re: Setting up ICM Sprawler 8.x (Ryan Burtch)
   5. Re: Setting up ICM Sprawler 8.x (Beck, Christopher)
   6. Re: should I rebuild cluster from scratch after   upgrade from
  v7 to v9? (Madziarczyk, Jonathan)
   7. Re: UCCX High CPU & Memory Usage (Anthony Holloway)
   8. Re: should I rebuild cluster from scratch after   upgrade from
  v7 to v9? (Lelio Fulgenzi)
   9. Re: Directory URI in LDAP sync (Anthony Holloway)
  10. FAX and ITSP SIP Trunks and CUBE (Dana Tong)
  11. Re: FAX and ITSP SIP Trunks and CUBE (Jason Aarons (AM))
  12. CUCM 10 Phones (Leslie Meade)
  13. Re: CUCM 10 Phones (James Buchanan)
  14. Re: CUCM 10 Phones (Matthew Collins)
  15. Re: CUCM 10 Phones (Jason Aarons (AM))
  16. Re: CUCM 10 Phones (Daniel Pagan)


--

Message: 1
Date: Wed, 5 Mar 2014 12:37:24 -0600
From: "Heim, Dennis" 
To: Lelio Fulgenzi , cisco-voip voyp list

Subject: Re: [cisco-voip] should I rebuild cluster from scratch after
upgrade from v7 to v9?
Message-ID:
<0cc57fcab07ceb4595526952471493d360d2283...@prodcms1.wwt.local>
Content-Type: text/plain; charset="utf-8"

Aligned partitions.

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.


From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Lelio 
Fulgenzi
Sent: Wednesday, March 05, 2014 10:56 AM
To: cisco-voip voyp list
Subject: [cisco-voip] should I rebuild cluster from scratch after upgrade from 
v7 to v9?


I have an opportunity (maybe, if time permits) to rebuild an off-line cluster 
after I upgrade it from v7 to v9.

The question is, is there any advantage to building a cluster from scratch and 
restore from DRS, so that it is built from v9 installation media rather than 
from a v7 upgrade?

I recall seeing a number of bugs in the past that said something to the effect 
of "...if installation was an upgrade, disk space, etc. etc"

Can anything thing of any advantages of doing this? This will help us test our 
disaster recovery process as well.

Lelio

---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS) University of Guelph

519?824?4120 Ext 56354
le...@uoguelph.ca
www.uoguelph.ca/ccs

[cisco-voip] Unity Connection transferring calls to CUCM

2014-03-07 Thread Jeffrey Girard

I have posted this same request for assistance in the Cisco IP Telephony 
Support Forum.  So far, not hits

CUCM 9 and CUC 9.  4 IP Phones registered and all have mailboxes.  I have a 
System Call Handler configured to answer calls coming from a CTI Route Point.

I have been playing with a scenario trying to learn all the capabilities of the 
various call handlers.

Im currently trying to allow the caller to transfer to a phone number that is 
registered in CUCM - but does NOT have a mailbox.

My CUC Configuration
 Call Handler Basics
  Callers Hear -> My Personal Recording
  During Greeting -> Allow Transfers to Numbers Not Associate with 
Users or Call Handlers
  After Greeting -> Conversation -> Caller System Transfer

 System Settings -> Restriction Tables
  Default Transfer
   I added a new entry and specifically entered the DN that I was 
trying to transfer to (123)
   I unchecked the "blocked" for all entries

 Call Management -> Call Routing -> Forwarded Routing Rules
   Attempt Forward Routing Rule -> Send Call to -> Conversation -> 
Attempt Forward

>From an IP Phone, I dial the CTI RP and get forwarded to the main / opening 
>call handler.  I traverse a couple of menu tree levels to get to my call 
>handler where I am attempting to transfer back to CUCM.  I hear my recorded 
>personal greeting instructing me to enter my number.  Whether I wait for the 
>recording to end or whether I enter the digits during the greeting, the 
>results are the same.  The result is that nothing happens.  No recorded 
>message telling me that I cant be transferred to that number - nothing at all. 
> The call just terminates.

I started up Connection Remote Port Status monitor and I can watch the sequence 
of the call.  When I enter the digits of the target phone (123), I see in the 
Remote Port Status Monitor that it sees and receives the DTMF digits, but then 
nothing happens.

I next tested by adding a test user in CUC with the same DN of 123.  As soon as 
I did that, I repeated the attempted call and when I dialed "123", I get the 
recorded message "Wait while I transfer that call" and then the call completes 
successfully.

This is my home lab so I can make any changes that you suggest with no user 
implications.

Jeff



Dr. Jeffrey T. Girard (Jeff), PhD
Colonel, United States Army (Retired)
Senior Network Engineer / VoIP Engineer - WireMeHappy.com
reply to: jeffrey.gir...@wiremehappy.com
(607)835-0406 (home office)
(845)764-1661 (mobile)
(607)835-0458 (fax)

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Setting up ICM Sprawler 8.x

2014-03-07 Thread Pavan K

Ryan,
If you are going to put it up on EC2, you should be able to put the ad on
the same box.

I  havent used EC2 yet for uc so am curious, wouldn't it be cheaper to
build a server ?
On Mar 6, 2014 12:54 PM, "Stephen Welsh" 
wrote:

>  I plan to setup a Sprawler at some point too, the following looks like a
> useful guide:
>
>  https://supportforums.cisco.com/docs/DOC-1374
>
>  I states the AD/DNS can be on the same box, however the post is a few
> years old, is this something that changes with a particular release?
>
>  It would be great if there was an updated version of the above guide as
> I know there are usually a ton of caveats and "special settings" that need
> to be taken into consideration.
>
>  Cheers
>
>  Stephen
>
>  On 5 Mar 2014, at 19:12, Beck, Christopher  wrote:
>
>   Pavan is right.   You will need SQL because the router/logger processes
> are on the server.  If you install the AW/HDS service on a different host,
> that will require SQL as well.  You will need separate server(s) for the
> AD/DNS.  It isn't supported as a function installed on the IPCC servers.
>
>
>  It doesn't matter if you have a sprawler or a multi-server production
> setup, these rules apply.
>
>  Hope it helps,
>  Chris
>
>  *From:* cisco-voip 
> [mailto:cisco-voip-boun...@puck.nether.net
> ] *On Behalf Of *Ryan Burtch
> *Sent:* Wednesday, March 05, 2014 12:41 PM
> *To:* Pavan K
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] Setting up ICM Sprawler 8.x
>
>  This is for a Sprawler.  Do you have any experience setting one of these
> up?
>
>
>
>
>   Sincerely,
>
>   Ryan Burtch
>
>
>  On Wed, Mar 5, 2014 at 1:38 PM, Pavan K  wrote:
>
>  AD /DNS is usually on a separate box
> You need SQL anywhere on the logger / aw/HDS/dds boxes. So yes you will
> need SQL.
>   On Mar 5, 2014 1:03 AM, "Ryan Burtch"  wrote:
>
>   I have a couple questions on the ICM Sprawler setup.
>
>   1. Does SQL need to be installed on the Sprawler?
>   2. Can AD/DNS be installed on the Sprawler?
>
>
>
>
>   Sincerely,
>
>   Ryan Burtch
>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> Confidentiality Notice: This email is intended for the sole use of the 
> intended
>  recipient(s) and may contain confidential, proprietary or privileged 
> information.
>  If you are not the intended recipient, you are notified that any use, review,
>  dissemination, copying or action taken based on this message or its 
> attachments,
>  if any, is prohibited. If you are not the intended recipient, please contact 
> the
>  sender by reply email and destroy or delete all copies of the original 
> message
>  and any attachments. Thank you.
>
>   ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

2014-03-07 Thread Mohammed Irshad

Yes. I have Cisco 8945 Phones at HQ  as well as at Branch Offices.

Regards
Irshad

-Original Message-
From: Heim, Dennis [mailto:dennis.h...@wwt.com] 
Sent: Friday, March 07, 2014 7:16 PM
To: Mohammed Irshad; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Is all your voice and video registered to CUCM?

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.

-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Mohammed Irshad
Sent: Friday, March 07, 2014 9:31 AM
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Dear All,

I have centralize CUCM Cluster with 40+ Branches with their respective
Branch DP's & regions  using g729 Codec  default video bit codec i.e. 384
and the  Cisco IP Phones  8945 register to CUCM cluster using WAN 1mb MPLS
link, when I have 2 video calls at the same time  between Branch and HQ
video  is getting distorted, please help what should I do.

Regards
Irshad

-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
cisco-voip-requ...@puck.nether.net
Sent: Thursday, March 06, 2014 8:00 PM
To: cisco-voip@puck.nether.net
Subject: cisco-voip Digest, Vol 125, Issue 5

Send cisco-voip mailing list submissions to
cisco-voip@puck.nether.net

To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
cisco-voip-requ...@puck.nether.net

You can reach the person managing the list at
cisco-voip-ow...@puck.nether.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of cisco-voip digest..."

Today's Topics:

   1. Re: should I rebuild cluster from scratch after upgrade   from
  v7 to v9? (Heim, Dennis)
   2. Re: Setting up ICM Sprawler 8.x (Pavan K)
   3. Re: should I rebuild cluster from scratch after upgrade   from
  v7 to v9? (Lelio Fulgenzi)
   4. Re: Setting up ICM Sprawler 8.x (Ryan Burtch)
   5. Re: Setting up ICM Sprawler 8.x (Beck, Christopher)
   6. Re: should I rebuild cluster from scratch after   upgrade from
  v7 to v9? (Madziarczyk, Jonathan)
   7. Re: UCCX High CPU & Memory Usage (Anthony Holloway)
   8. Re: should I rebuild cluster from scratch after   upgrade from
  v7 to v9? (Lelio Fulgenzi)
   9. Re: Directory URI in LDAP sync (Anthony Holloway)
  10. FAX and ITSP SIP Trunks and CUBE (Dana Tong)
  11. Re: FAX and ITSP SIP Trunks and CUBE (Jason Aarons (AM))
  12. CUCM 10 Phones (Leslie Meade)
  13. Re: CUCM 10 Phones (James Buchanan)
  14. Re: CUCM 10 Phones (Matthew Collins)
  15. Re: CUCM 10 Phones (Jason Aarons (AM))
  16. Re: CUCM 10 Phones (Daniel Pagan)

--

Message: 1
Date: Wed, 5 Mar 2014 12:37:24 -0600
From: "Heim, Dennis" 
To: Lelio Fulgenzi , cisco-voip voyp list

Subject: Re: [cisco-voip] should I rebuild cluster from scratch after
upgrade from v7 to v9?
Message-ID:
<0cc57fcab07ceb4595526952471493d360d2283...@prodcms1.wwt.local>
Content-Type: text/plain; charset="utf-8"

Aligned partitions.

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Lelio Fulgenzi
Sent: Wednesday, March 05, 2014 10:56 AM
To: cisco-voip voyp list
Subject: [cisco-voip] should I rebuild cluster from scratch after upgrade
from v7 to v9?

I have an opportunity (maybe, if time permits) to rebuild an off-line
cluster after I upgrade it from v7 to v9.

The question is, is there any advantage to building a cluster from scratch
and restore from DRS, so that it is built from v9 installation media rather
than from a v7 upgrade?

I recall seeing a number of bugs in the past that said something to the
effect of "...if installation was an upgrade, disk space, etc. etc"

Can anything thing of any advantages of doing this? This will help us test
our disaster recovery process as well.

Lelio

---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS) University of Guelph

519?824?4120 Ext 56354
le...@uoguelph.ca
www.uoguelph.ca/ccs
Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1

-- next part --
An HTML attachment was scrubbed...
URL:

--

Message: 2
Date: Thu, 6 Mar 2014 00:08:39 +0530
From: Pavan K 
To: Ryan Burtch 
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Setting up ICM Sprawler 8.x
Message-ID:

Content-Ty

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

2014-03-07 Thread Heim, Dennis

Is all your voice and video registered to CUCM?

Dennis Heim | Solution Architect (Collaboration)
World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.

-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
Mohammed Irshad
Sent: Friday, March 07, 2014 9:31 AM
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Dear All,

I have centralize CUCM Cluster with 40+ Branches with their respective Branch 
DP's & regions  using g729 Codec  default video bit codec i.e. 384 and the  
Cisco IP Phones  8945 register to CUCM cluster using WAN 1mb MPLS link, when I 
have 2 video calls at the same time  between Branch and HQ video  is getting 
distorted, please help what should I do.

Regards
Irshad

-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
cisco-voip-requ...@puck.nether.net
Sent: Thursday, March 06, 2014 8:00 PM
To: cisco-voip@puck.nether.net
Subject: cisco-voip Digest, Vol 125, Issue 5

Send cisco-voip mailing list submissions to
cisco-voip@puck.nether.net

To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
cisco-voip-requ...@puck.nether.net

You can reach the person managing the list at
cisco-voip-ow...@puck.nether.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of cisco-voip digest..."

Today's Topics:

   1. Re: should I rebuild cluster from scratch after upgrade   from
  v7 to v9? (Heim, Dennis)
   2. Re: Setting up ICM Sprawler 8.x (Pavan K)
   3. Re: should I rebuild cluster from scratch after upgrade   from
  v7 to v9? (Lelio Fulgenzi)
   4. Re: Setting up ICM Sprawler 8.x (Ryan Burtch)
   5. Re: Setting up ICM Sprawler 8.x (Beck, Christopher)
   6. Re: should I rebuild cluster from scratch after   upgrade from
  v7 to v9? (Madziarczyk, Jonathan)
   7. Re: UCCX High CPU & Memory Usage (Anthony Holloway)
   8. Re: should I rebuild cluster from scratch after   upgrade from
  v7 to v9? (Lelio Fulgenzi)
   9. Re: Directory URI in LDAP sync (Anthony Holloway)
  10. FAX and ITSP SIP Trunks and CUBE (Dana Tong)
  11. Re: FAX and ITSP SIP Trunks and CUBE (Jason Aarons (AM))
  12. CUCM 10 Phones (Leslie Meade)
  13. Re: CUCM 10 Phones (James Buchanan)
  14. Re: CUCM 10 Phones (Matthew Collins)
  15. Re: CUCM 10 Phones (Jason Aarons (AM))
  16. Re: CUCM 10 Phones (Daniel Pagan)

--

Message: 1
Date: Wed, 5 Mar 2014 12:37:24 -0600
From: "Heim, Dennis" 
To: Lelio Fulgenzi , cisco-voip voyp list

Subject: Re: [cisco-voip] should I rebuild cluster from scratch after
upgrade from v7 to v9?
Message-ID:
<0cc57fcab07ceb4595526952471493d360d2283...@prodcms1.wwt.local>
Content-Type: text/plain; charset="utf-8"

Aligned partitions.

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Lelio 
Fulgenzi
Sent: Wednesday, March 05, 2014 10:56 AM
To: cisco-voip voyp list
Subject: [cisco-voip] should I rebuild cluster from scratch after upgrade from 
v7 to v9?

I have an opportunity (maybe, if time permits) to rebuild an off-line cluster 
after I upgrade it from v7 to v9.

The question is, is there any advantage to building a cluster from scratch and 
restore from DRS, so that it is built from v9 installation media rather than 
from a v7 upgrade?

I recall seeing a number of bugs in the past that said something to the effect 
of "...if installation was an upgrade, disk space, etc. etc"

Can anything thing of any advantages of doing this? This will help us test our 
disaster recovery process as well.

Lelio

---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS) University of Guelph

519?824?4120 Ext 56354
le...@uoguelph.ca
www.uoguelph.ca/ccs
Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1

-- next part --
An HTML attachment was scrubbed...
URL:

--

Message: 2
Date: Thu, 6 Mar 2014 00:08:39 +0530
From: Pavan K 
To: Ryan Burtch 
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Setting up ICM Sprawler 8.x
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

AD /DNS is usually on a separate box
You need SQL anywhere on the logger / aw/HDS/dds boxes. So yes you will need 
SQL.
On Mar 5, 2014 1:03 AM, "Ryan Burtch"  wrote:

> I have a couple questions on the ICM Sprawler setup.
>
> 1. Does SQL need to be installe

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

2014-03-07 Thread Mohammed Irshad

Dear All,

I have centralize CUCM Cluster with 40+ Branches with their respective
Branch DP's & regions  using g729 Codec  default video bit codec i.e. 384
and the  Cisco IP Phones  8945 register to CUCM cluster using WAN 1mb MPLS
link, when I have 2 video calls at the same time  between Branch and HQ
video  is getting distorted, please help what should I do.

Regards
Irshad

-Original Message-
From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
cisco-voip-requ...@puck.nether.net
Sent: Thursday, March 06, 2014 8:00 PM
To: cisco-voip@puck.nether.net
Subject: cisco-voip Digest, Vol 125, Issue 5

Send cisco-voip mailing list submissions to
cisco-voip@puck.nether.net

To subscribe or unsubscribe via the World Wide Web, visit
https://puck.nether.net/mailman/listinfo/cisco-voip
or, via email, send a message with subject or body 'help' to
cisco-voip-requ...@puck.nether.net

You can reach the person managing the list at
cisco-voip-ow...@puck.nether.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of cisco-voip digest..."

Today's Topics:

   1. Re: should I rebuild cluster from scratch after upgrade   from
  v7 to v9? (Heim, Dennis)
   2. Re: Setting up ICM Sprawler 8.x (Pavan K)
   3. Re: should I rebuild cluster from scratch after upgrade   from
  v7 to v9? (Lelio Fulgenzi)
   4. Re: Setting up ICM Sprawler 8.x (Ryan Burtch)
   5. Re: Setting up ICM Sprawler 8.x (Beck, Christopher)
   6. Re: should I rebuild cluster from scratch after   upgrade from
  v7 to v9? (Madziarczyk, Jonathan)
   7. Re: UCCX High CPU & Memory Usage (Anthony Holloway)
   8. Re: should I rebuild cluster from scratch after   upgrade from
  v7 to v9? (Lelio Fulgenzi)
   9. Re: Directory URI in LDAP sync (Anthony Holloway)
  10. FAX and ITSP SIP Trunks and CUBE (Dana Tong)
  11. Re: FAX and ITSP SIP Trunks and CUBE (Jason Aarons (AM))
  12. CUCM 10 Phones (Leslie Meade)
  13. Re: CUCM 10 Phones (James Buchanan)
  14. Re: CUCM 10 Phones (Matthew Collins)
  15. Re: CUCM 10 Phones (Jason Aarons (AM))
  16. Re: CUCM 10 Phones (Daniel Pagan)

--

Message: 1
Date: Wed, 5 Mar 2014 12:37:24 -0600
From: "Heim, Dennis" 
To: Lelio Fulgenzi , cisco-voip voyp list

Subject: Re: [cisco-voip] should I rebuild cluster from scratch after
upgrade from v7 to v9?
Message-ID:
<0cc57fcab07ceb4595526952471493d360d2283...@prodcms1.wwt.local>
Content-Type: text/plain; charset="utf-8"

Aligned partitions.

Dennis Heim | Solution Architect (Collaboration) World Wide Technology, Inc.
| 314-212-1814

PS Engineering:  Innovate & Ignite.

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of
Lelio Fulgenzi
Sent: Wednesday, March 05, 2014 10:56 AM
To: cisco-voip voyp list
Subject: [cisco-voip] should I rebuild cluster from scratch after upgrade
from v7 to v9?

I have an opportunity (maybe, if time permits) to rebuild an off-line
cluster after I upgrade it from v7 to v9.

The question is, is there any advantage to building a cluster from scratch
and restore from DRS, so that it is built from v9 installation media rather
than from a v7 upgrade?

I recall seeing a number of bugs in the past that said something to the
effect of "...if installation was an upgrade, disk space, etc. etc"

Can anything thing of any advantages of doing this? This will help us test
our disaster recovery process as well.

Lelio

---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS) University of Guelph

519?824?4120 Ext 56354
le...@uoguelph.ca
www.uoguelph.ca/ccs
Room 037, Animal Science and Nutrition Building Guelph, Ontario, N1G 2W1

-- next part --
An HTML attachment was scrubbed...
URL:

--

Message: 2
Date: Thu, 6 Mar 2014 00:08:39 +0530
From: Pavan K 
To: Ryan Burtch 
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Setting up ICM Sprawler 8.x
Message-ID:

Content-Type: text/plain; charset="iso-8859-1"

AD /DNS is usually on a separate box
You need SQL anywhere on the logger / aw/HDS/dds boxes. So yes you will need
SQL.
On Mar 5, 2014 1:03 AM, "Ryan Burtch"  wrote:

> I have a couple questions on the ICM Sprawler setup.
>
> 1. Does SQL need to be installed on the Sprawler?
> 2. Can AD/DNS be installed on the Sprawler?
>
>
>
>
> Sincerely,
>
> Ryan Burtch
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-- next part --
An HTML attachment was scrubbed...
URL:

Re: [cisco-voip] CUCM 10 Phones

2014-03-07 Thread Ryan Ratliff (rratliff)

For what it's worth I can't recall a phone model ever being removed from UCM.  
The phone may not be supported (or tested) any longer but once it's in there 
you won't likely ever see it go away.  With SCCP getting almost no attention 
from new features its actually more likely the older phones will continue to 
work for the foreseeable future.  I can even recall a bug getting fixed in UCM 
9 that only affected 7960 phones.

-Ryan

On Mar 6, 2014, at 8:56 AM, Daniel Pagan 
mailto:dpa...@fidelus.com>> wrote:

You can use the following tool to view IP phone compatibility with a selected 
version of CUCM:
http://tools.cisco.com/ITDIT/vtgsca/VTGServlet

The required firmware is listed beside each supported phone model.

Hope this helps.

- Daniel

From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of 
Leslie Meade
Sent: Wednesday, March 05, 2014 11:29 PM
To: cisco-voip (cisco-voip@puck.nether.net)
Subject: [cisco-voip] CUCM 10 Phones

I know that the 1st gen phones are end of life, but they should still connect 
to a callmanager 10 environment ?
I have a client that wants to upgrade the system, but at this time not willing 
to upgrade the handsets.
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] 3750 QoS

Re: [cisco-voip] CRS Editor not connecting to IPIVR

[cisco-voip] CRS Editor not connecting to IPIVR

Re: [cisco-voip] ip phone services

[cisco-voip] ip phone services

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

[cisco-voip] Unity Connection transferring calls to CUCM

Re: [cisco-voip] Setting up ICM Sprawler 8.x

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Re: [cisco-voip] cisco-voip Digest, Vol 125, Issue 5

Re: [cisco-voip] CUCM 10 Phones

14 matches

Site Navigation

Mail list logo

Footer information