Re: [cisco-voip] Attendant Console Advanced 12.0

[Anthony Holloway]

No sorry, I'm not very advanced on the CUACA product, therefore my
troubleshooting skills on it are low.  The little bit I knew about the
DDIs, is from the admin/install guide.

On Tue, Mar 27, 2018 at 10:48 PM naresh rathore  wrote:

> hi Anthony,
>
>
>
> Thanks for your email,
>
>
>
>
> could you also tell me about the cuac advanced installation. i can only
> see two menus and machine unavailable in server detail as mentioned in my
> previous email. i installed windows server 2016, sql 2014 evaluation and
> cuac 12 advanced.
>
>
>
> Regards
>
>
>
> Naray
>
>
>
>
>
> --
> *From:* Anthony Holloway 
> *Sent:* Tuesday, March 27, 2018 6:06 PM
> *To:* naresh rathore
> *Cc:* cisco-voip@puck.nether.net
> *Subject:* Re: [cisco-voip] Attendant Console Advanced 12.0
>
> RE: CTI Route Point Config
>
> When you build the DDI for the queue, in CUACA Web Admin, you will have to
> build one for each server, with different numbers, and CUACA, via AXL, will
> use your CTI template to create both CTI Route Points and do the forwarding
> for you.  So, be sure to have the proper CSS for forwarding Unregistered
> and CTI Failure for it to work properly.  There's also a setting on the
> queue to send cause to, when both are down, and CUACA sets that on the
> second CTI Route Point.
>
> On Mon, Mar 26, 2018 at 6:43 AM naresh rathore 
> wrote:
>
> hi,
>
>
>
> i have to integrate attendant console (in resilient environment) to
> recently upgraded (from 9.1 to 12). i installed windows 2016, sql 2014 and
> CUAC software. but when i installed software and configured it as
> publisher, i couldnt browse to Webadmin page. i decided to shut this VM and
> configure the second server (which i installed to be configured as
> subscriber) as publisher. this time i was able to browse to Webadmin page
> but could only see Engineering and help menu (see the attached). and when i
> select any of the engineering menu, i see "machine unavailable" in server
> detail. did somebody face this issue before. I think because i took 2
> snapshots for each vm (one after installation of windows and one before
> CUAC software installation).
>
>
> Furthermore i have following queries.
>
>
>
>1. can i test resilience on demo license?
>2. what is the best way to configure resilience for CTI RP and CTI
>ports. Do i have to configure CUAC1's CTI Routepoint CTI unregistered to
>point to CUAC2's CTI Routepoint. CTI unregistered of CUAC2's CTI
>unregistered to CUCM's hungroup?. Do i have to configure CTI unregistered
>for CTI Ports as well??
>
>
>
> Regards
>
>
>
> Naray
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Attendant Console Advanced 12.0

[naresh rathore]

hi Anthony,



Thanks for your email,




could you also tell me about the cuac advanced installation. i can only see two 
menus and machine unavailable in server detail as mentioned in my previous 
email. i installed windows server 2016, sql 2014 evaluation and cuac 12 
advanced.



Regards



Naray





From: Anthony Holloway 
Sent: Tuesday, March 27, 2018 6:06 PM
To: naresh rathore
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Attendant Console Advanced 12.0

RE: CTI Route Point Config

When you build the DDI for the queue, in CUACA Web Admin, you will have to 
build one for each server, with different numbers, and CUACA, via AXL, will use 
your CTI template to create both CTI Route Points and do the forwarding for 
you.  So, be sure to have the proper CSS for forwarding Unregistered and CTI 
Failure for it to work properly.  There's also a setting on the queue to send 
cause to, when both are down, and CUACA sets that on the second CTI Route Point.

On Mon, Mar 26, 2018 at 6:43 AM naresh rathore 
mailto:nare...@hotmail.com>> wrote:

hi,



i have to integrate attendant console (in resilient environment) to recently 
upgraded (from 9.1 to 12). i installed windows 2016, sql 2014 and CUAC 
software. but when i installed software and configured it as publisher, i 
couldnt browse to Webadmin page. i decided to shut this VM and configure the 
second server (which i installed to be configured as subscriber) as publisher. 
this time i was able to browse to Webadmin page but could only see Engineering 
and help menu (see the attached). and when i select any of the engineering 
menu, i see "machine unavailable" in server detail. did somebody face this 
issue before. I think because i took 2 snapshots for each vm (one after 
installation of windows and one before CUAC software installation).


Furthermore i have following queries.


  1.  can i test resilience on demo license?
  2.  what is the best way to configure resilience for CTI RP and CTI ports. Do 
i have to configure CUAC1's CTI Routepoint CTI unregistered to point to CUAC2's 
CTI Routepoint. CTI unregistered of CUAC2's CTI unregistered to CUCM's 
hungroup?. Do i have to configure CTI unregistered for CTI Ports as well??



Regards



Naray

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] Windows AXL Query Tool

[Pete Brown]

[cid:8bc16a0d-4448-4067-aef0-fb4bf10e88a7]
For anyone who is interested, I wrote a quick and dirty Windows app for ad-hoc 
AXL queries.  I couldn't find anything readily available that didn't involve 
scripting.  It only supports SELECT statements at the moment.

It's been tested with 10.5 so far and probably has bugs which will trigger the 
next apocalypse.  Use at your own risk.

Usage Notes:

Adding a Profile - Right click under "Hosts" and Add Server.  Validate then 
Submit and it will automatically save a config file in the working directory.

Listing Tables - When you select a host, it will automatically grab a list of 
tables.

Queries - Type in the query and execute.  It will either display results or an 
error code on the bottom.


https://www.adhdtech.com/CUCM%20AXL%20Query.exe

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Renewing TVS and IPSec certificates

[Ryan Ratliff (rratliff)]

You also don’t need to restart the TFTP service when regenerating TVS certs, in 
fact it can cause problems depending on how quickly you pull the trigger and 
how many phones you have.

-Ryan

On Mar 27, 2018, at 1:37 PM, Brian Meade 
mailto:bmead...@vt.edu>> wrote:

If just doing IPSec, you just need to restart the DRS services.  No affect on 
ITL.

As soon as you regenerate TVS on any node, all phones will reboot and ITL will 
be updated instantly.  Be very careful to do this one node at a time making 
sure all phones re-register before moving on.  Really only a huge issue if you 
are doing the CallManager.pem at the same time.

TVS certs aren't in the CTL last I checked so you shouldn't need to regenerate 
the CTL on mixed-mode clusters if just updating TVS/IPSec.

On Tue, Mar 27, 2018 at 1:03 PM, ROZA, Ariel 
mailto:ariel.r...@la.logicalis.com>> wrote:
Hi guys,

I have some specific questions regarding renewing some certificates.
The situation is this. In a cluster with 4 servers, I have two of them that 
have their tvs.pem and ipsec.pem certificates paste their due date.
I have reviewed a lot of the documentation available, and designed a 
step-by-step procedure to renew them, doing so one server at a time, stopping 
the TFTP, etc.

But still I have some specific doubts:

If I just want to renew the ipsec.pem cert ¿Do I have to go through the 
complete process to renew the ITL and reset the phones to get it? Or can I just 
renew the self-signed cert and restart the DRS Services?
If I am using mixed mode ¿Do I have to regenerate the CTL file as well?

Regards,

Ariel Roza
Collaboration Support Engineer
t: +54 11 5282-0458
c: +54 9 11 5017-4417 webex: 
http://logicalis-la.webex.com/join/ariel.roza
Av. Belgrano 955 – Piso 20 – CABA – Argentina – C1092AAJ
www.la.logicalis.com
_
Business and technology working as one




 
 


Logicalis Argentina S.A. solo puede ser obligado por sus representantes legales 
conforme los límites establecidos en el acto constitutivo y la legislación en 
vigor.
El contenido del presente correo electrónico e inclusive sus anexos contienen 
información confidencial.
El mismo no puede ser divulgado y/o utilizado por cualquiera otro distinto al 
destinatario, ni puede ser copiado de cualquier forma.


___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Renewing TVS and IPSec certificates

[Brian Meade]

If just doing IPSec, you just need to restart the DRS services.  No affect
on ITL.

As soon as you regenerate TVS on any node, all phones will reboot and ITL
will be updated instantly.  Be very careful to do this one node at a time
making sure all phones re-register before moving on.  Really only a huge
issue if you are doing the CallManager.pem at the same time.

TVS certs aren't in the CTL last I checked so you shouldn't need to
regenerate the CTL on mixed-mode clusters if just updating TVS/IPSec.

On Tue, Mar 27, 2018 at 1:03 PM, ROZA, Ariel 
wrote:

> Hi guys,
>
>
>
> I have some specific questions regarding renewing some certificates.
>
> The situation is this. In a cluster with 4 servers, I have two of them
> that have their tvs.pem and ipsec.pem certificates paste their due date.
>
> I have reviewed a lot of the documentation available, and designed a
> step-by-step procedure to renew them, doing so one server at a time,
> stopping the TFTP, etc.
>
>
>
> But still I have some specific doubts:
>
>
>
> If I just want to renew the ipsec.pem cert ¿Do I have to go through the
> complete process to renew the ITL and reset the phones to get it? Or can I
> just renew the self-signed cert and restart the DRS Services?
> If I am using mixed mode ¿Do I have to regenerate the CTL file as well?
>
>
>
> Regards,
>
>
>
> *Ariel Roza*
> *Collaboration Support Engineer *
>
> t: +54 11 5282-0458 <+54%2011%205282-0458>
>
> c: +54 9 11 5017-4417 <+54%209%2011%205017-4417> webex:
> http://logicalis-la.webex.com/join/ariel.roza
>
> Av. Belgrano 955 – Piso 20 – CABA – Argentina – C1092AAJ
>
> www.la.logicalis.com
>
>
> *_ **Business **and
> technology working as one*
>
> [image: cid:image003.png@01D3894B.346BF840]
>
>
>
> [image: cid:image005.png@01D3894B.43930F20]
>
>
>
> [image: Descripción: Descripción: Descripción: Descripción: Descripción:
> Descripción: Descripción: Descripción: Descripción: Descripción:
> Descripción: Descripción: Descripción: Descripción: Descripción:
> Descripción: tw]  [image: Descripción:
> Descripción: Descripción: Descripción: Descripción: Descripción:
> Descripción: Descripción: Descripción: Descripción: Descripción:
> Descripción: Descripción: Descripción: Descripción: Descripción: fb]
>  [image:
> Descripción: Descripción: Descripción: Descripción: Descripción:
> Descripción: Descripción: Descripción: Descripción: Descripción:
> Descripción: Descripción: Descripción: Descripción: Descripción:
> Descripción: yt] 
>
>
>
> Logicalis Argentina S.A. solo puede ser obligado por sus representantes
> legales conforme los límites establecidos en el acto constitutivo y la
> legislación en vigor.
>
> El contenido del presente correo electrónico e inclusive sus anexos
> contienen información confidencial.
>
> El mismo no puede ser divulgado y/o utilizado por cualquiera otro distinto
> al destinatario, ni puede ser copiado de cualquier forma.
>
>
>
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] Renewing TVS and IPSec certificates

[ROZA, Ariel]

Hi guys,

I have some specific questions regarding renewing some certificates.
The situation is this. In a cluster with 4 servers, I have two of them that 
have their tvs.pem and ipsec.pem certificates paste their due date.
I have reviewed a lot of the documentation available, and designed a 
step-by-step procedure to renew them, doing so one server at a time, stopping 
the TFTP, etc.

But still I have some specific doubts:

If I just want to renew the ipsec.pem cert ¿Do I have to go through the 
complete process to renew the ITL and reset the phones to get it? Or can I just 
renew the self-signed cert and restart the DRS Services?
If I am using mixed mode ¿Do I have to regenerate the CTL file as well?

Regards,

Ariel Roza
Collaboration Support Engineer
t: +54 11 5282-0458
c: +54 9 11 5017-4417 webex: http://logicalis-la.webex.com/join/ariel.roza
Av. Belgrano 955 - Piso 20 - CABA - Argentina - C1092AAJ
www.la.logicalis.com
_
Business and technology working as one
[cid:image003.png@01D3894B.346BF840]

[cid:image005.png@01D3894B.43930F20]

[cid:image004.jpg@01D3C5D4.570377A0][Descripción: Descripción: Descripción: 
Descripción: Descripción: Descripción: Descripción: Descripción: Descripción: 
Descripción: Descripción: Descripción: Descripción: Descripción: Descripción: 
Descripción: tw] [Descripción: Descripción: 
Descripción: Descripción: Descripción: Descripción: Descripción: Descripción: 
Descripción: Descripción: Descripción: Descripción: Descripción: Descripción: 
Descripción: Descripción: fb] 
  [Descripción: 
Descripción: Descripción: Descripción: Descripción: Descripción: Descripción: 
Descripción: Descripción: Descripción: Descripción: Descripción: Descripción: 
Descripción: Descripción: Descripción: yt] 


Logicalis Argentina S.A. solo puede ser obligado por sus representantes legales 
conforme los límites establecidos en el acto constitutivo y la legislación en 
vigor.
El contenido del presente correo electrónico e inclusive sus anexos contienen 
información confidencial.
El mismo no puede ser divulgado y/o utilizado por cualquiera otro distinto al 
destinatario, ni puede ser copiado de cualquier forma.

___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] CUC and Exchange Online migration

[Anthony Holloway]

RE: SQL to Check for VMPs

! Get a list of VMPs
run sql select name from voicemessagingprofile order by name asc
name

Direct2VoiceMail
NoVoiceMail
Voicemail

! Get a summary of assignment
run sql select v.name, count(v.name) as count from voicemessagingprofile as
v left join numplan as n on v.pkid = n.fkvoicemessagingprofile group by
v.name order by count(v.name) desc
name count
 =
Voicemail43
NoVoiceMail  10
Direct2VoiceMail 1

! Get a detailed report of assignment
admin:run sql select n.dnorpattern, v.name from numplan as n left join
voicemessagingprofile as v on n.fkvoicemessagingprofile = v.pkid order by
v.name asc
dnorpatternname
== 
*  Direct2VoiceMail
2007   NoVoiceMail
4055   Voicemail
...output truncated...


On Tue, Mar 27, 2018 at 2:23 AM James Andrewartha via cisco-voip <
cisco-voip@puck.nether.net> wrote:

> Hi voipers,
>
> We're about to move all voicemail from Exchange 2013 on-prem to CUC, and
> then migrate to Exchange Online. We have the Unified Messaging from CUC
> to Exchange 2013 working fine, I found one post that said that things
> will just work(tm) when we start moving users to Exchange Online, is
> that correct or would I need to set up a separate Unified Messaging
> Service for it?
>
> Also is there an SQL query I can run in CUCM to determine which DNs have
> a custom Voice Mail Profile set?
>
> Thanks,
>
> --
> James Andrewartha
> Network & Projects Engineer
> Christ Church Grammar School
> Claremont, Western Australia
> Ph. (08) 9442 1757
> Mob. 0424 160 877
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Re: [cisco-voip] Attendant Console Advanced 12.0

[Anthony Holloway]

RE: CTI Route Point Config

When you build the DDI for the queue, in CUACA Web Admin, you will have to
build one for each server, with different numbers, and CUACA, via AXL, will
use your CTI template to create both CTI Route Points and do the forwarding
for you.  So, be sure to have the proper CSS for forwarding Unregistered
and CTI Failure for it to work properly.  There's also a setting on the
queue to send cause to, when both are down, and CUACA sets that on the
second CTI Route Point.

On Mon, Mar 26, 2018 at 6:43 AM naresh rathore  wrote:

> hi,
>
>
>
> i have to integrate attendant console (in resilient environment) to
> recently upgraded (from 9.1 to 12). i installed windows 2016, sql 2014 and
> CUAC software. but when i installed software and configured it as
> publisher, i couldnt browse to Webadmin page. i decided to shut this VM and
> configure the second server (which i installed to be configured as
> subscriber) as publisher. this time i was able to browse to Webadmin page
> but could only see Engineering and help menu (see the attached). and when i
> select any of the engineering menu, i see "machine unavailable" in server
> detail. did somebody face this issue before. I think because i took 2
> snapshots for each vm (one after installation of windows and one before
> CUAC software installation).
>
>
> Furthermore i have following queries.
>
>
>
>1. can i test resilience on demo license?
>2. what is the best way to configure resilience for CTI RP and CTI
>ports. Do i have to configure CUAC1's CTI Routepoint CTI unregistered to
>point to CUAC2's CTI Routepoint. CTI unregistered of CUAC2's CTI
>unregistered to CUCM's hungroup?. Do i have to configure CTI unregistered
>for CTI Ports as well??
>
>
>
> Regards
>
>
>
> Naray
> ___
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[cisco-voip] CUC and Exchange Online migration

[James Andrewartha via cisco-voip]

Hi voipers,

We're about to move all voicemail from Exchange 2013 on-prem to CUC, and
then migrate to Exchange Online. We have the Unified Messaging from CUC
to Exchange 2013 working fine, I found one post that said that things
will just work(tm) when we start moving users to Exchange Online, is
that correct or would I need to set up a separate Unified Messaging
Service for it?

Also is there an SQL query I can run in CUCM to determine which DNs have
a custom Voice Mail Profile set?

Thanks,

-- 
James Andrewartha
Network & Projects Engineer
Christ Church Grammar School
Claremont, Western Australia
Ph. (08) 9442 1757
Mob. 0424 160 877
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip