Re: [cisco-voip] Bogen paging system with TAMB2 and 310 VG.
TAMB is not the right tool if you want zones. You need a zone controller, such as the PCM2000, not the TAMB. PCM2000 can connect to a FXO or FXS port on the vgw. -mn Original message From: Hamu Ebiso <hebiso2...@hotmail.com> Date:2017-06-12 19:19 (GMT-07:00) To: "Norton, Mike" <mikenor...@pwsd76.ab.ca>, cisco-voip@puck.nether.net Subject: Re: Bogen paging system with TAMB2 and 310 VG. Yes we are using Bogens and in order to make VG work with Bogens, we used TAMB2. The questions were there are already 3 Zones and the customers are looking for the ways to Tie all 3 Zones to all Zones PAGING ZONE. I was just wondering if someone has ever done that. Using Bogens, TAMB2 and VG 310. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. Original message From: "Norton, Mike" <mikenor...@pwsd76.ab.ca> Date: 6/12/17 12:01 PM (GMT-06:00) To: Hamu Ebiso <hebiso2...@hotmail.com>, cisco-voip@puck.nether.net Subject: RE: Bogen paging system with TAMB2 and 310 VG. The TAMB doesn’t do zoning – one zone only. If you need zones, then take a look at the Bogen PCM2000 system instead of the TAMB. -mn From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Hamu Ebiso Sent: June 8, 2017 1:22 PM To: cisco-voip@puck.nether.net Subject: [cisco-voip] Bogen paging system with TAMB2 and 310 VG. Hi Everyone, One of our customer was using Avaya phone system with Bogens paging system. We have converted them to cisco systems. Qe have ordered TAMB2 in order to make the their paging system work qith VG 310. They have about 4 Zones and all zones are working fine. Now the customer came back and asking how to create new zone and connect to all other existing zones. I am just wondering if someone has this kind of setup and can share them with me how to set them up. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] Bogen paging system with TAMB2 and 310 VG.
Yes we are using Bogens and in order to make VG work with Bogens, we used TAMB2. The questions were there are already 3 Zones and the customers are looking for the ways to Tie all 3 Zones to all Zones PAGING ZONE. I was just wondering if someone has ever done that. Using Bogens, TAMB2 and VG 310. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. Original message From: "Norton, Mike" <mikenor...@pwsd76.ab.ca> Date: 6/12/17 12:01 PM (GMT-06:00) To: Hamu Ebiso <hebiso2...@hotmail.com>, cisco-voip@puck.nether.net Subject: RE: Bogen paging system with TAMB2 and 310 VG. The TAMB doesn’t do zoning – one zone only. If you need zones, then take a look at the Bogen PCM2000 system instead of the TAMB. -mn From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Hamu Ebiso Sent: June 8, 2017 1:22 PM To: cisco-voip@puck.nether.net Subject: [cisco-voip] Bogen paging system with TAMB2 and 310 VG. Hi Everyone, One of our customer was using Avaya phone system with Bogens paging system. We have converted them to cisco systems. Qe have ordered TAMB2 in order to make the their paging system work qith VG 310. They have about 4 Zones and all zones are working fine. Now the customer came back and asking how to create new zone and connect to all other existing zones. I am just wondering if someone has this kind of setup and can share them with me how to set them up. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] Bogen paging system with TAMB2 and 310 VG.
The TAMB doesn’t do zoning – one zone only. If you need zones, then take a look at the Bogen PCM2000 system instead of the TAMB. -mn From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Hamu Ebiso Sent: June 8, 2017 1:22 PM To: cisco-voip@puck.nether.net Subject: [cisco-voip] Bogen paging system with TAMB2 and 310 VG. Hi Everyone, One of our customer was using Avaya phone system with Bogens paging system. We have converted them to cisco systems. Qe have ordered TAMB2 in order to make the their paging system work qith VG 310. They have about 4 Zones and all zones are working fine. Now the customer came back and asking how to create new zone and connect to all other existing zones. I am just wondering if someone has this kind of setup and can share them with me how to set them up. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
[cisco-voip] Bogen paging system with TAMB2 and 310 VG.
Hi Everyone, One of our customer was using Avaya phone system with Bogens paging system. We have converted them to cisco systems. Qe have ordered TAMB2 in order to make the their paging system work qith VG 310. They have about 4 Zones and all zones are working fine. Now the customer came back and asking how to create new zone and connect to all other existing zones. I am just wondering if someone has this kind of setup and can share them with me how to set them up. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] BOGEN PAGING SYSTEM.
If you're talking about using a 2900 series router versus something like a VG224, its essentially the same difference as far as technicalities go. I have one in my current environment running off an FXS port on our 4431 gateway, just have it configured via SCCP on CUCM. From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Hamu Ebiso Sent: Tuesday, May 23, 2017 3:51 PM To: James O'Neill <jone...@pasadenaisd.org>; cisco-voip@puck.nether.net Subject: Re: [cisco-voip] BOGEN PAGING SYSTEM. I have a router with 4 FXO port and i am thinking about bypassing VG and directly connecting to Bogan Paging system however, i haven't done this kind of configuration and that is the reason i am asking. I am just wondering if someone has a working config. Thanks Hamu Sent from my Sprint Samsung Galaxy S(r) 6. Original message From: James O'Neill <jone...@pasadenaisd.org<mailto:jone...@pasadenaisd.org>> Date: 5/23/17 1:11 PM (GMT-06:00) To: Hamu Ebiso <hebiso2...@hotmail.com<mailto:hebiso2...@hotmail.com>>, cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> Subject: RE: BOGEN PAGING SYSTEM. We use our SRST routers with FXO cards as the gateway for our PAs. We've used them successful with Bogan in the past using the module that had the POTS connection. We've also used them successfully with Valcom PA equipment. I've found that if you have a POTS/Analog connection and know the DTMF codes you can use an FXO port as the gateway on most PA vendors. Some are a little tricky and might require a port created by punching down to a 66 block. James O'Neill From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Hamu Ebiso Sent: Tuesday, May 23, 2017 11:48 AM To: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> Subject: [cisco-voip] BOGEN PAGING SYSTEM. Hi all, Has anyone know how to connect bogen paging system yo VG for paging. We are converting avaya phone system to Cisco and the customer have old paging system wich is bogen. We ordered VG for their analog and I don't know we havr to move from yhat system to VG. If we have to connect directly from bouce gateway or some other way to connect to VG. Thanks Hamu Sent from my Sprint Samsung Galaxy S(r) 6. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Pasadena I.S.D. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. Pasadena ISD is an equal opportunity employer and provides equal access to all students http://www1.pasadenaisd.org/cms/One.aspx?portalId=80772=494145<http://cp.mcafee.com/d/1jWVIq3x0SyMqenTT3hPtVwTsSyyO-OCe78CzASyyO-OCeuvpdEEILLfzDDT3qabxEVd7dXThKr8qHaNk54SRtxIrsKr9JGX3oSVsSg89CzBxcQsLZvAnQNNEVss7tuVtdAszOrX9EVd7dNMXG8FHnjlLtPBgY-F6lK1FJ4SyrLRQnAS77D3hOMrKr01B4umSCEv3pkgU03BBqo68vMf3OiRoPQYdgeuKe79J104bqhYdgeod7b2b3VKQGmGncRAIn8lrxrW0FpKNnwqj-f0QSyUMqenPobZ8Qg6BKQGmGncRAIqnjh0cxw93gcd40m40A6wM96y0o0UM2hErUSOedMZij> Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] BOGEN PAGING SYSTEM.
I have a router with 4 FXO port and i am thinking about bypassing VG and directly connecting to Bogan Paging system however, i haven't done this kind of configuration and that is the reason i am asking. I am just wondering if someone has a working config. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. Original message From: James O'Neill <jone...@pasadenaisd.org> Date: 5/23/17 1:11 PM (GMT-06:00) To: Hamu Ebiso <hebiso2...@hotmail.com>, cisco-voip@puck.nether.net Subject: RE: BOGEN PAGING SYSTEM. We use our SRST routers with FXO cards as the gateway for our PAs. We’ve used them successful with Bogan in the past using the module that had the POTS connection. We’ve also used them successfully with Valcom PA equipment. I’ve found that if you have a POTS/Analog connection and know the DTMF codes you can use an FXO port as the gateway on most PA vendors. Some are a little tricky and might require a port created by punching down to a 66 block. James O'Neill From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Hamu Ebiso Sent: Tuesday, May 23, 2017 11:48 AM To: cisco-voip@puck.nether.net Subject: [cisco-voip] BOGEN PAGING SYSTEM. Hi all, Has anyone know how to connect bogen paging system yo VG for paging. We are converting avaya phone system to Cisco and the customer have old paging system wich is bogen. We ordered VG for their analog and I don't know we havr to move from yhat system to VG. If we have to connect directly from bouce gateway or some other way to connect to VG. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Pasadena I.S.D. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. Pasadena ISD is an equal opportunity employer and provides equal access to all students http://www1.pasadenaisd.org/cms/One.aspx?portalId=80772=494145 ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] BOGEN PAGING SYSTEM.
We use our SRST routers with FXO cards as the gateway for our PAs. We’ve used them successful with Bogan in the past using the module that had the POTS connection. We’ve also used them successfully with Valcom PA equipment. I’ve found that if you have a POTS/Analog connection and know the DTMF codes you can use an FXO port as the gateway on most PA vendors. Some are a little tricky and might require a port created by punching down to a 66 block. James O'Neill From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Hamu Ebiso Sent: Tuesday, May 23, 2017 11:48 AM To: cisco-voip@puck.nether.net Subject: [cisco-voip] BOGEN PAGING SYSTEM. Hi all, Has anyone know how to connect bogen paging system yo VG for paging. We are converting avaya phone system to Cisco and the customer have old paging system wich is bogen. We ordered VG for their analog and I don't know we havr to move from yhat system to VG. If we have to connect directly from bouce gateway or some other way to connect to VG. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Pasadena I.S.D. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. Pasadena ISD is an equal opportunity employer and provides equal access to all students http://www1.pasadenaisd.org/cms/One.aspx?portalId=80772=494145 ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] BOGEN PAGING SYSTEM.
I’ve connected to bogens in the past by using Valcom V9970s quite a number of times. From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of dhortens1 . Sent: Tuesday, May 23, 2017 12:59 PM To: norm.nichol...@kitchener.ca Cc: Cisco VoIP Group <cisco-voip@puck.nether.net> Subject: Re: [cisco-voip] BOGEN PAGING SYSTEM. You might be able to connect directly using an FXO/FXS port or connect using a paging relay. On Tue, May 23, 2017 at 12:51 PM, <norm.nichol...@kitchener.ca<mailto:norm.nichol...@kitchener.ca>> wrote: I use a Bogen TAMB2PS as the interface between Cisco analog ports and Bogen amps. Thanks From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net<mailto:cisco-voip-boun...@puck.nether.net>] On Behalf Of Hamu Ebiso Sent: Tuesday, May 23, 2017 12:48 PM To: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> Subject: [cisco-voip] BOGEN PAGING SYSTEM. Hi all, Has anyone know how to connect bogen paging system yo VG for paging. We are converting avaya phone system to Cisco and the customer have old paging system wich is bogen. We ordered VG for their analog and I don't know we havr to move from yhat system to VG. If we have to connect directly from bouce gateway or some other way to connect to VG. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. ___ cisco-voip mailing list cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip<http://cp.mcafee.com/d/2DRPoQrhod7bXXXMVZMTsSyyO-OCe78CzASyyO-OCeuvpdEEILLfzDDT3qabxEVd7dXThKr8qHaNk54SRtxIrsKr9JGX3oSVsSOVHz2pEVvW_8IzHLfLftuVtddUQsYCPtdcQsFTWyaaRQRrFFYG7DR8OJMddECQjt-KyMCyUYUMYrKr9PCJhbcmrIlU6A_zMdMjlS67OFek7qVqlblbCqOmdSBiRiVCIByV2Hsbvg5bdSaY3ivNU6CQrLII6MnWhEwdbtFkJkKpH9oQKCy0p30i6woq80I818d1wid40M1Nw4zgTNJAsrQuAW> Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] BOGEN PAGING SYSTEM.
I use a Bogen TAMB2PS as the interface between Cisco analog ports and Bogen amps. Thanks From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Hamu Ebiso Sent: Tuesday, May 23, 2017 12:48 PM To: cisco-voip@puck.nether.net Subject: [cisco-voip] BOGEN PAGING SYSTEM. Hi all, Has anyone know how to connect bogen paging system yo VG for paging. We are converting avaya phone system to Cisco and the customer have old paging system wich is bogen. We ordered VG for their analog and I don't know we havr to move from yhat system to VG. If we have to connect directly from bouce gateway or some other way to connect to VG. Thanks Hamu Sent from my Sprint Samsung Galaxy S® 6. ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
