I've not implemented this with the phones, but, I would check the phone log to
see if it thinks a VLAN change is taking place, and the device is dropping off
the network at a session renewal time. Depending on the volume of devices you
may want session renewal times to be in the order of days, if ever, if it's set
to 45 minutes or something.
Best,
Adam
From: cisco-voip On Behalf Of Riley, Sean
Sent: Thursday, September 17, 2020 6:00 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Implementing 802.1x for IP Phones - issue with UCM timeout
We are working on implementing 802.1x with our 8851 ip phones. We have
installed the LSC cert and enabled 802.1x on a few phones for testing. We are
using Cisco ISE and the switch is configured for host mode multi domain.
Everything seemed to be working fine, until we noticed the phones were
resetting about every 48 minutes. Looking at the logs on the phone it seems it
is being reset due to a timeout with CUCM.
ReasonForOutOfService=10 followed by a ReasonForOutOfService=23
My Cisco ISE admin didn't see anything on that side that he thinks is causing
the timeout, and we only seem to see this issue after registering the phone
with 802.1x enabled.
Any thoughts before I start collecting traces and wireshark captures.
CUCM v 11.5(1) SU6
IP phones are on latest firmware 12.7 or 12.8
Thanks.
Sean.
___
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip