Re: [Clamav-users] trying upgrade clamav 0.93 to 0.94 on i386 FreeBSD

[Sam Lin]

Dear All,

I'll try uograde to 6.3 then install clamav 0.9.4
thank's for every body.


在 2008/9/23 下午 10:20 時， [EMAIL PROTECTED] 寫到：

> Rob MacGregor wrote:
>> On Tue, Sep 23, 2008 at 14:30,  <[EMAIL PROTECTED]> wrote:
>>> Or you can just delete --enable-gethostbyname_r from the  
>>> CONFIGURE_ARGS
>>> section of the port Makefile and everything will work fine.  I would
>>> advise that you stick with 6.3 as it has a longer support cycle than
>>> anything so far in the 7.x cycle.
>>
>> Right now the EOL for 6.3 is based upon it being the last 6.x.
>> However, 6.4 is scheduled to be released next month, at which point
>> the EOL for 6.3 will be 12 months from it's release - January 2009, a
>> month before 7.0 (February 2009).  Details of how the EOL process
>> works can be found at http://www.freebsd.org/security/#sup
>>
>
> Sorry but I don't see where it says that.  I see this:
>
> "Please note that these dates may be extended into the
> future, but only extenuating circumstances would lead
> to a branch's support being dropped earlier than the
> date listed."
>
> So unless some extenuating circumstances come along 6.3
> should be good until 1/31/2010.
>
> It also says this:
>
> Extended: Selected releases will be supported by the Security
> Officer for a minimum of 24 months after the release.
>
> 6.3 is labeled as an "extended" release and it was released  
> 01/18/2008.
>
> If they don't stick to these dates they should not even bother
> publishing them because they would be meaningless.
>
> Steven
> ___
> Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
> http://www.clamav.net/support/ml

___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml

Re: [Clamav-users] Error with make on Mac OS X 10.4.11 Intel - 0.94

[Török Edwin]

On 2008-09-23 19:49, Chuck Swiger wrote:
> On Sep 23, 2008, at 8:22 AM, Faddah Steve Yuetsu Wolf wrote:
>   
>> whoops!  somehow, my cut and paste of all that came after "$ locate
>> libclamunrar" got truncated.  here is the full listing of what that
>> command returned —
>> 
> [ .../Users/yuetsu 1/Downloads/clamav-0.94... ]
>
> Try doing your builds under /tmp or someplace without a space in the  
> pathname.  I suppose you could also file a bug report against the  
> ClamAV build system for not handling such paths...

Are you talking about this bug:
https://wwws.clamav.net/bugzilla/show_bug.cgi?id=1162

It has been solved in SVN, and it had nothing to do with pathnames. It
was a libtool bug that was resolved by upgrading libtool to latest
upstream release.

Best regards,
--Edwin
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml

Re: [Clamav-users] Error with make on Mac OS X 10.4.11 Intel - 0.94

[Chuck Swiger]

On Sep 23, 2008, at 8:22 AM, Faddah Steve Yuetsu Wolf wrote:
> whoops!  somehow, my cut and paste of all that came after "$ locate
> libclamunrar" got truncated.  here is the full listing of what that
> command returned —
[ .../Users/yuetsu 1/Downloads/clamav-0.94... ]

Try doing your builds under /tmp or someplace without a space in the  
pathname.  I suppose you could also file a bug report against the  
ClamAV build system for not handling such paths...

Regards,
-- 
-Chuck

___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml

Re: [Clamav-users] Virus not detected on Linux/MacOSX

[Alexandre Biancalana]

On 9/22/08, Eric Rostetter <[EMAIL PROTECTED]> wrote:
> Quoting fchan <[EMAIL PROTECTED]>:
>
>  > Remember not everyone that uses clamav is not an expert so for
>
>
> They don't have to be an expert, they just have to read and configure
>  the configuration file for their needs.
>
>
>  > someone that is new to clamav thinks that every file that went
>  > through clamav would be scanned for malware would be incorrect and
>  > they have a possibility of opening an infected file. I think a
>
>
> Yes, but they should have read the configuration file, and change it
>  to meet their needs.  If they didn't, well, that is their fault.
>
>
>  > message or warning that a file that was too large passed through
>  > clamav without being scanned would be nice so one can take
>  > appropriate action. That is my opinion.
>
>
> First, it is not too large to pass through clamav, the user decided
>  they didn't want it to pass through, or the user was negligent in
>  configuring it.

I'm using clamscan directly not clamdscan

How can I change the default behavior without have to specify
--max-filesize parameter at command line ?

>
>  Second, I would support such an output only when using the scanner
>  in "debug" mode...  Would be very useful when debugging, to see such
>  a message.  In normal mode, I see no reason to force this on the author
>  against their will.  Even in debug mode, it is up to the author, but
>  I do think it would be useful in debug mode...
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml

Re: [Clamav-users] Error with make on Mac OS X 10.4.11 Intel - 0.94

[Faddah Steve Yuetsu Wolf]

On Sep 23, 2008, at 3:00 AM, [EMAIL PROTECTED]  
wrote:

> here's the thing ? i also have tried "$ locate libclamunrar," and when
> i do, it finds it, both versions 4 & 5, in *both* the /usr/local/
> clamXav/lib/  and in the ... /.libs/ ... where you folks say it should
> be, as well as other places ?
>
> $ locate libclamunrar ...


whoops!  somehow, my cut and paste of all that came after "$ locate  
libclamunrar" got truncated.  here is the full listing of what that  
command returned —

$ locate libclamunrar
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar15.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar20.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarcmd.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarfilter.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarhlp.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarppm.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarvm.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM/Contents
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM/Contents/Info.plist
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM/Contents/Resources
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM/Contents/Resources/DWARF
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM/Contents/Resources/DWARF/libclamunrar.5.0.1.dylib
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.dylib
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.a
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/ 
libclamunrar.dylib
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.la
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/ 
libclamunrar.lai
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/unrar.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/unrar15.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/unrar20.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/unrarcmd.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/unrarfilter.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/unrarhlp.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/unrarppm.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/unrarvm.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/Makefile
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/Makefile.am
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/Makefile.in
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/libclamunrar.la
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/libclamunrar.map
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar.c
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar.h
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar.lo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar15.c
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar15.h
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar15.lo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar15.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar20.c
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar20.h
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar20.lo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrar20.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarcmd.c
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarcmd.h
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarcmd.lo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarcmd.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarfilter.c
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarfilter.h
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarfilter.lo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarfilter.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarhlp.c
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarhlp.h
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarhlp.lo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarhlp.o
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarppm.c
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarppm.h
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarppm.lo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/unrarppm.o
/Users/yuetsu 1/Downloads/clamav-0.94/libc

Re: [Clamav-users] trying upgrade clamav 0.93 to 0.94 on i386 FreeBSD

[kwijibo]

Rob MacGregor wrote:
> On Tue, Sep 23, 2008 at 14:30,  <[EMAIL PROTECTED]> wrote:
>> Or you can just delete --enable-gethostbyname_r from the CONFIGURE_ARGS
>> section of the port Makefile and everything will work fine.  I would
>> advise that you stick with 6.3 as it has a longer support cycle than
>> anything so far in the 7.x cycle.
> 
> Right now the EOL for 6.3 is based upon it being the last 6.x.
> However, 6.4 is scheduled to be released next month, at which point
> the EOL for 6.3 will be 12 months from it's release - January 2009, a
> month before 7.0 (February 2009).  Details of how the EOL process
> works can be found at http://www.freebsd.org/security/#sup
> 

Sorry but I don't see where it says that.  I see this:

"Please note that these dates may be extended into the
future, but only extenuating circumstances would lead
to a branch's support being dropped earlier than the
date listed."

So unless some extenuating circumstances come along 6.3
should be good until 1/31/2010.

It also says this:

Extended: Selected releases will be supported by the Security
Officer for a minimum of 24 months after the release.

6.3 is labeled as an "extended" release and it was released 01/18/2008.

If they don't stick to these dates they should not even bother
publishing them because they would be meaningless.

Steven
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml

Re: [Clamav-users] trying upgrade clamav 0.93 to 0.94 on i386 FreeBSD

[Rob MacGregor]

On Tue, Sep 23, 2008 at 14:30,  <[EMAIL PROTECTED]> wrote:
>
> Or you can just delete --enable-gethostbyname_r from the CONFIGURE_ARGS
> section of the port Makefile and everything will work fine.  I would
> advise that you stick with 6.3 as it has a longer support cycle than
> anything so far in the 7.x cycle.

Right now the EOL for 6.3 is based upon it being the last 6.x.
However, 6.4 is scheduled to be released next month, at which point
the EOL for 6.3 will be 12 months from it's release - January 2009, a
month before 7.0 (February 2009).  Details of how the EOL process
works can be found at http://www.freebsd.org/security/#sup

-- 
 Please keep list traffic on the list.

Rob MacGregor
 Whoever fights monsters should see to it that in the process he
 doesn't become a monster. Friedrich Nietzsche
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml

Re: [Clamav-users] trying upgrade clamav 0.93 to 0.94 on i386 FreeBSD

[kwijibo]

Rob MacGregor wrote:
> On Tue, Sep 23, 2008 at 08:37, Sam Lin <[EMAIL PROTECTED]> wrote:
>> Hello list,
>>
>> i try pkg_add -r clamav and it's show me the package are the same
>> Fetching 
>> ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/clamav.tbz
>> pkg_add: package 'clamav-0.93.3' or its older version already installed
>>
>> then i try use ports to compile clamav 0.94 on my i386 FreeBSD 6.1-
>> STABLE and have some error message:
> 
> FreeBSD 6.1 is no longer supported by the ports system - if you want
> to continue using the ports you need to upgrade to 6.3 or 7.0 (6.4 and
> 7.1 are due for release next month), or track RELENG_7 or RELENG_6.  I
> would advise that 7.x is a better choice as 6.x is the legacy release.
> 

Or you can just delete --enable-gethostbyname_r from the CONFIGURE_ARGS
section of the port Makefile and everything will work fine.  I would
advise that you stick with 6.3 as it has a longer support cycle than
anything so far in the 7.x cycle.

Steven
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml

Re: [Clamav-users] Unsubscribe

[Ed Kasky]

The proper method to unsubscribe is in the headers:

List-Unsubscribe:
,



At 03:29 AM Tuesday, 9/23/2008, you wrote -=>



>Khalid Iqbal
>P.O Box 282133
>Dubai,United Arab Emirates.
>
>Tel:  +971 4 338 7718
>Fax: +971 4 338 7719
>[EMAIL PROTECTED]
>
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:clamav-users-
> > [EMAIL PROTECTED] On Behalf Of Faddah Steve Yuetsu Wolf
> > Sent: 23 September 2008 12:30
> > To: clamav-users@lists.clamav.net
> > Subject: Re: [Clamav-users] Error with make on Mac OS X 10.4.11 Intel -
> > 0.94
> >
> >
> > i want folks to know i'm also seeing these same sorts of errors on mac
> > os x 10.5.5 (leopard), all current apple security updates, on a
> > macbook intel core2duo 2.16 GHz, 2 GB of ram, xcode 3.1.1, and using
> > gcc 4.2.1.
> >
> > my make line i try is:  $ make CC=/usr/bin/gcc-4.2
> >
> > here are the errors i see (also with libclamunrar.la) —
> >
> > ...
> > /bin/sh ../libtool --tag=CC   --mode=link /usr/bin/gcc-4.2  -g -O2 -
> > version-info 5:1:0 -no-undefined -Wl,-M,../libclamav/libclamav.map  -o
> > libclamav.la -rpath /usr/local/lib matcher-ac.lo matcher-bm.lo
> > matcher.lo md5.lo others.lo readdb.lo cvd.lo dsig.lo str.lo
> > scanners.lo textdet.lo filetypes.lo rtf.lo blob.lo mbox.lo message.lo
> > table.lo text.lo ole2_extract.lo vba_extract.lo msexpand.lo pe.lo
> > disasm.lo upx.lo htmlnorm.lo chmunpack.lo rebuildpe.lo petite.lo
> > wwunpack.lo unsp.lo aspack.lo packlibs.lo fsg.lo mew.lo upack.lo
> > line.lo untar.lo unzip.lo inflate64.lo special.lo binhex.lo is_tar.lo
> > tnef.lo autoit.lo strlcpy.lo regcomp.lo regerror.lo regexec.lo
> > regfree.lo unarj.lo bzlib.lo nulsft.lo infblock.lo pdf.lo spin.lo
> > yc.lo elf.lo sis.lo uuencode.lo phishcheck.lo phish_domaincheck_db.lo
> > phish_whitelist.lo regex_list.lo regex_suffix.lo mspack.lo cab.lo
> > entconv.lo hashtab.lo dconf.lo lzma_iface.lo explode.lo textnorm.lo
> > dlp.lo js-norm.lo uniq.lo version.lo ../libclamunrar_iface/
> > libclamunrar_iface.la lzma/liblzma.la  -lz -lbz2 -liconv  -lz
> > ../libtool: line 3296: cd: 1/Downloads/clamav-0.94/libclamunrar: No
> > such file or directory
> > libtool: link: warning: cannot determine absolute directory name of `1/
> > Downloads/clamav-0.94/libclamunrar'
> > grep: 1/Downloads/clamav-0.94/libclamunrar/libclamunrar.la: No such
> > file or directory
> > sed: 1/Downloads/clamav-0.94/libclamunrar/libclamunrar.la: No such
> > file or directory
> > libtool: link: `1/Downloads/clamav-0.94/libclamunrar/libclamunrar.la'
> > is not a valid libtool archive
> > make[4]: *** [libclamav.la] Error 1
> > make[3]: *** [all-recursive] Error 1
> > make[2]: *** [all] Error 2
> > make[1]: *** [all-recursive] Error 1
> > make: *** [all] Error 2
> >
> > here's the thing — i also have tried "$ locate libclamunrar," and when
> > i do, it finds it, both versions 4 & 5, in *both* the /usr/local/
> > clamXav/lib/  and in the ... /.libs/ ... where you folks say it should
> > be, as well as other places —
> >
> > $ locate libclamunrar
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar.Plo
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar15.Plo
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar20.Plo
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarcmd.Plo
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarfilter.Plo
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarhlp.Plo
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarppm.Plo
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarvm.Plo
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> > 5.0.1.dylib
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> > 5.0.1.dylib.dSYM
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> > 5.0.1.dylib.dSYM/Contents
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> > 5.0.1.dylib.dSYM/Contents/Info.plist
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> > 5.0.1.dylib.dSYM/Contents/Resources
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> > 5.0.1.dylib.dSYM/Contents/Resources/DWARF
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> > 5.0.1.dylib.dSYM/Contents/Resources/DWARF/libclamunrar.5.0.1.dylib
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> > 5.dylib
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.a
> > /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/
> > libclamunrar.dylib
> >
> > ...
> >
> > so how do i look up and stay notified on this bug #1162 that j

Re: [Clamav-users] [Bulk] Unsubscribe

[Jerry]

On Tue, 23 Sep 2008 14:29:54 +0400
Khalid <[EMAIL PROTECTED]> wrote:

> Khalid Iqbal
> P.O Box 282133
> Dubai,United Arab Emirates.
>  
> Tel:  +971 4 338 7718
> Fax: +971 4 338 7719
> [EMAIL PROTECTED]

List-Unsubscribe:
,


-- 
Jerry
[EMAIL PROTECTED]

Beware of self-styled experts: an ex is a has-been, and a spurt is a
drip under pressure.


signature.asc
Description: PGP signature
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml

[Clamav-users] Unsubscribe

[Khalid]

Khalid Iqbal
P.O Box 282133
Dubai,United Arab Emirates.
 
Tel:  +971 4 338 7718
Fax: +971 4 338 7719
[EMAIL PROTECTED]
 
 
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:clamav-users-
> [EMAIL PROTECTED] On Behalf Of Faddah Steve Yuetsu Wolf
> Sent: 23 September 2008 12:30
> To: clamav-users@lists.clamav.net
> Subject: Re: [Clamav-users] Error with make on Mac OS X 10.4.11 Intel -
> 0.94
> 
> 
> i want folks to know i'm also seeing these same sorts of errors on mac
> os x 10.5.5 (leopard), all current apple security updates, on a
> macbook intel core2duo 2.16 GHz, 2 GB of ram, xcode 3.1.1, and using
> gcc 4.2.1.
> 
> my make line i try is:  $ make CC=/usr/bin/gcc-4.2
> 
> here are the errors i see (also with libclamunrar.la) —
> 
> ...
> /bin/sh ../libtool --tag=CC   --mode=link /usr/bin/gcc-4.2  -g -O2 -
> version-info 5:1:0 -no-undefined -Wl,-M,../libclamav/libclamav.map  -o
> libclamav.la -rpath /usr/local/lib matcher-ac.lo matcher-bm.lo
> matcher.lo md5.lo others.lo readdb.lo cvd.lo dsig.lo str.lo
> scanners.lo textdet.lo filetypes.lo rtf.lo blob.lo mbox.lo message.lo
> table.lo text.lo ole2_extract.lo vba_extract.lo msexpand.lo pe.lo
> disasm.lo upx.lo htmlnorm.lo chmunpack.lo rebuildpe.lo petite.lo
> wwunpack.lo unsp.lo aspack.lo packlibs.lo fsg.lo mew.lo upack.lo
> line.lo untar.lo unzip.lo inflate64.lo special.lo binhex.lo is_tar.lo
> tnef.lo autoit.lo strlcpy.lo regcomp.lo regerror.lo regexec.lo
> regfree.lo unarj.lo bzlib.lo nulsft.lo infblock.lo pdf.lo spin.lo
> yc.lo elf.lo sis.lo uuencode.lo phishcheck.lo phish_domaincheck_db.lo
> phish_whitelist.lo regex_list.lo regex_suffix.lo mspack.lo cab.lo
> entconv.lo hashtab.lo dconf.lo lzma_iface.lo explode.lo textnorm.lo
> dlp.lo js-norm.lo uniq.lo version.lo ../libclamunrar_iface/
> libclamunrar_iface.la lzma/liblzma.la  -lz -lbz2 -liconv  -lz
> ../libtool: line 3296: cd: 1/Downloads/clamav-0.94/libclamunrar: No
> such file or directory
> libtool: link: warning: cannot determine absolute directory name of `1/
> Downloads/clamav-0.94/libclamunrar'
> grep: 1/Downloads/clamav-0.94/libclamunrar/libclamunrar.la: No such
> file or directory
> sed: 1/Downloads/clamav-0.94/libclamunrar/libclamunrar.la: No such
> file or directory
> libtool: link: `1/Downloads/clamav-0.94/libclamunrar/libclamunrar.la'
> is not a valid libtool archive
> make[4]: *** [libclamav.la] Error 1
> make[3]: *** [all-recursive] Error 1
> make[2]: *** [all] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
> 
> here's the thing — i also have tried "$ locate libclamunrar," and when
> i do, it finds it, both versions 4 & 5, in *both* the /usr/local/
> clamXav/lib/  and in the ... /.libs/ ... where you folks say it should
> be, as well as other places —
> 
> $ locate libclamunrar
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar.Plo
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar15.Plo
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar20.Plo
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarcmd.Plo
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarfilter.Plo
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarhlp.Plo
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarppm.Plo
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarvm.Plo
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> 5.0.1.dylib
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> 5.0.1.dylib.dSYM
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> 5.0.1.dylib.dSYM/Contents
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> 5.0.1.dylib.dSYM/Contents/Info.plist
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> 5.0.1.dylib.dSYM/Contents/Resources
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> 5.0.1.dylib.dSYM/Contents/Resources/DWARF
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> 5.0.1.dylib.dSYM/Contents/Resources/DWARF/libclamunrar.5.0.1.dylib
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.
> 5.dylib
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.a
> /Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/
> libclamunrar.dylib
> 
> ...
> 
> so how do i look up and stay notified on this bug #1162 that james
> filed?  is there a chance of getting this fixed?  or is there some
> workaround or way to compile with the "make" that i'm not doing right
> or missing here?  please advise.  sorry for the nØØb questions, i'm
> new to the list, but i did take the trouble of searching and finding
> this similar thread before posting my problem.  thanx in advance.
> 
> sincerely,
> 
> —  faddah stev

Re: [Clamav-users] Error with make on Mac OS X 10.4.11 Intel - 0.94

[Faddah Steve Yuetsu Wolf]

i want folks to know i'm also seeing these same sorts of errors on mac  
os x 10.5.5 (leopard), all current apple security updates, on a  
macbook intel core2duo 2.16 GHz, 2 GB of ram, xcode 3.1.1, and using  
gcc 4.2.1.

my make line i try is:  $ make CC=/usr/bin/gcc-4.2

here are the errors i see (also with libclamunrar.la) —

...
/bin/sh ../libtool --tag=CC   --mode=link /usr/bin/gcc-4.2  -g -O2 - 
version-info 5:1:0 -no-undefined -Wl,-M,../libclamav/libclamav.map  -o  
libclamav.la -rpath /usr/local/lib matcher-ac.lo matcher-bm.lo  
matcher.lo md5.lo others.lo readdb.lo cvd.lo dsig.lo str.lo  
scanners.lo textdet.lo filetypes.lo rtf.lo blob.lo mbox.lo message.lo  
table.lo text.lo ole2_extract.lo vba_extract.lo msexpand.lo pe.lo  
disasm.lo upx.lo htmlnorm.lo chmunpack.lo rebuildpe.lo petite.lo  
wwunpack.lo unsp.lo aspack.lo packlibs.lo fsg.lo mew.lo upack.lo  
line.lo untar.lo unzip.lo inflate64.lo special.lo binhex.lo is_tar.lo  
tnef.lo autoit.lo strlcpy.lo regcomp.lo regerror.lo regexec.lo  
regfree.lo unarj.lo bzlib.lo nulsft.lo infblock.lo pdf.lo spin.lo  
yc.lo elf.lo sis.lo uuencode.lo phishcheck.lo phish_domaincheck_db.lo  
phish_whitelist.lo regex_list.lo regex_suffix.lo mspack.lo cab.lo  
entconv.lo hashtab.lo dconf.lo lzma_iface.lo explode.lo textnorm.lo  
dlp.lo js-norm.lo uniq.lo version.lo ../libclamunrar_iface/ 
libclamunrar_iface.la lzma/liblzma.la  -lz -lbz2 -liconv  -lz
../libtool: line 3296: cd: 1/Downloads/clamav-0.94/libclamunrar: No  
such file or directory
libtool: link: warning: cannot determine absolute directory name of `1/ 
Downloads/clamav-0.94/libclamunrar'
grep: 1/Downloads/clamav-0.94/libclamunrar/libclamunrar.la: No such  
file or directory
sed: 1/Downloads/clamav-0.94/libclamunrar/libclamunrar.la: No such  
file or directory
libtool: link: `1/Downloads/clamav-0.94/libclamunrar/libclamunrar.la'  
is not a valid libtool archive
make[4]: *** [libclamav.la] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

here's the thing — i also have tried "$ locate libclamunrar," and when  
i do, it finds it, both versions 4 & 5, in *both* the /usr/local/ 
clamXav/lib/  and in the ... /.libs/ ... where you folks say it should  
be, as well as other places —

$ locate libclamunrar
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar15.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrar20.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarcmd.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarfilter.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarhlp.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarppm.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.deps/unrarvm.Plo
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM/Contents
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM/Contents/Info.plist
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM/Contents/Resources
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM/Contents/Resources/DWARF
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.0.1.dylib.dSYM/Contents/Resources/DWARF/libclamunrar.5.0.1.dylib
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar. 
5.dylib
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/libclamunrar.a
/Users/yuetsu 1/Downloads/clamav-0.94/libclamunrar/.libs/ 
libclamunrar.dylib

...

so how do i look up and stay notified on this bug #1162 that james  
filed?  is there a chance of getting this fixed?  or is there some  
workaround or way to compile with the "make" that i'm not doing right  
or missing here?  please advise.  sorry for the nØØb questions, i'm  
new to the list, but i did take the trouble of searching and finding  
this similar thread before posting my problem.  thanx in advance.

sincerely,

—  faddah steve yuetsu wolf
 portland, oregon
 [EMAIL PROTECTED]
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml

Re: [Clamav-users] trying upgrade clamav 0.93 to 0.94 on i386 FreeBSD

[Rob MacGregor]

On Tue, Sep 23, 2008 at 08:37, Sam Lin <[EMAIL PROTECTED]> wrote:
>
> Hello list,
>
> i try pkg_add -r clamav and it's show me the package are the same
> Fetching 
> ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/clamav.tbz
> pkg_add: package 'clamav-0.93.3' or its older version already installed
>
> then i try use ports to compile clamav 0.94 on my i386 FreeBSD 6.1-
> STABLE and have some error message:

FreeBSD 6.1 is no longer supported by the ports system - if you want
to continue using the ports you need to upgrade to 6.3 or 7.0 (6.4 and
7.1 are due for release next month), or track RELENG_7 or RELENG_6.  I
would advise that 7.x is a better choice as 6.x is the legacy release.

-- 
 Please keep list traffic on the list.

Rob MacGregor
 Whoever fights monsters should see to it that in the process he
 doesn't become a monster. Friedrich Nietzsche
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml

[Clamav-users] trying upgrade clamav 0.93 to 0.94 on i386 FreeBSD

[Sam Lin]

Hello list,

i try pkg_add -r clamav and it's show me the package are the same
Fetching 
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/clamav.tbz
pkg_add: package 'clamav-0.93.3' or its older version already installed

then i try use ports to compile clamav 0.94 on my i386 FreeBSD 6.1- 
STABLE and have some error message:

spam [/usr/ports/security/clamav] -root- [W0] make
===>  Building for clamav-0.94_1
make  all-recursive
Making all in libclamunrar
Making all in libclamunrar_iface
Making all in libclamav
make  all-recursive
Making all in lzma
Making all in .
svnversion: not found
git-svn: not found
/bin/sh /usr/local/bin/libtool --tag=CC--mode=compile cc - 
DHAVE_CONFIG_H -I. -I..   -I.. -I./nsis -I./lzma -I/usr/local/include   
-O2 -fno-strict-aliasing -pipe -c -o version.lo version.c
  cc -DHAVE_CONFIG_H -I. -I.. -I.. -I./nsis -I./lzma -I/usr/local/ 
include -O2 -fno-strict-aliasing -pipe -c version.c  -fPIC -DPIC - 
o .libs/version.o
  cc -DHAVE_CONFIG_H -I. -I.. -I.. -I./nsis -I./lzma -I/usr/local/ 
include -O2 -fno-strict-aliasing -pipe -c version.c -o version.o >/dev/ 
null 2>&1
/bin/sh /usr/local/bin/libtool --tag=CC--mode=link cc  -O2 -fno- 
strict-aliasing -pipe  -thread-safe -version-info 5:1:0  -no-undefined  
-Wl,--version-script,../libclamav/libclamav.map -L/usr/local/lib  - 
lthr -o libclamav.la -rpath /usr/local/lib matcher-ac.lo matcher-bm.lo  
matcher.lo  md5.lo others.lo readdb.lo cvd.lo dsig.lo str.lo  
scanners.lo  textdet.lo filetypes.lo rtf.lo blob.lo mbox.lo  
message.lo  table.lo text.lo ole2_extract.lo vba_extract.lo  
msexpand.lo  pe.lo disasm.lo upx.lo htmlnorm.lo chmunpack.lo  
rebuildpe.lo  petite.lo wwunpack.lo unsp.lo aspack.lo packlibs.lo  
fsg.lo  mew.lo upack.lo line.lo untar.lo unzip.lo inflate64.lo   
special.lo binhex.lo is_tar.lo tnef.lo autoit.lo strlcpy.lo   
regcomp.lo regerror.lo regexec.lo regfree.lo unarj.lo bzlib.lo   
nulsft.lo infblock.lo pdf.lo spin.lo yc.lo elf.lo sis.lo  uuencode.lo  
phishcheck.lo phish_domaincheck_db.lo  phish_whitelist.lo  
regex_list.lo regex_suffix.lo mspack.lo  cab.lo entconv.lo hashtab.lo  
dconf.lo lzma_iface.lo explode.lo  textnorm.lo dlp.lo js-norm.lo  
uniq.lo version.lo ../libclamunrar_iface/libclamunrar_iface.la lzma/ 
liblzma.la  -lz -L/usr/local/lib -lbz2 -R/usr/local/lib -L/usr/local/ 
lib -lgmp -R/usr/local/lib -lthr -lz
rm -fr  .libs/libclamav.a .libs/libclamav.la .libs/libclamav.lai .libs/ 
libclamav.so .libs/libclamav.so.5
cc -shared  .libs/matcher-ac.o .libs/matcher-bm.o .libs/ 
matcher.o .libs/md5.o .libs/others.o .libs/readdb.o .libs/cvd.o .libs/ 
dsig.o .libs/str.o .libs/scanners.o .libs/textdet.o .libs/ 
filetypes.o .libs/rtf.o .libs/blob.o .libs/mbox.o .libs/ 
message.o .libs/table.o .libs/text.o .libs/ole2_extract.o .libs/ 
vba_extract.o .libs/msexpand.o .libs/pe.o .libs/disasm.o .libs/ 
upx.o .libs/htmlnorm.o .libs/chmunpack.o .libs/rebuildpe.o .libs/ 
petite.o .libs/wwunpack.o .libs/unsp.o .libs/aspack.o .libs/ 
packlibs.o .libs/fsg.o .libs/mew.o .libs/upack.o .libs/line.o .libs/ 
untar.o .libs/unzip.o .libs/inflate64.o .libs/special.o .libs/ 
binhex.o .libs/is_tar.o .libs/tnef.o .libs/autoit.o .libs/ 
strlcpy.o .libs/regcomp.o .libs/regerror.o .libs/regexec.o .libs/ 
regfree.o .libs/unarj.o .libs/bzlib.o .libs/nulsft.o .libs/ 
infblock.o .libs/pdf.o .libs/spin.o .libs/yc.o .libs/elf.o .libs/ 
sis.o .libs/uuencode.o .libs/phishcheck.o .libs/ 
phish_domaincheck_db.o .libs/phish_whitelist.o .libs/ 
regex_list.o .libs/regex_suffix.o .libs/mspack.o .libs/cab.o .libs/ 
entconv.o .libs/hashtab.o .libs/dconf.o .libs/lzma_iface.o .libs/ 
explode.o .libs/textnorm.o .libs/dlp.o .libs/js-norm.o .libs/ 
uniq.o .libs/version.o -Wl,--whole-archive lzma/.libs/liblzma.a -Wl,-- 
no-whole-archive  -Wl,--rpath -Wl,/usr/ports/security/clamav/work/ 
clamav-0.94/libclamunrar_iface/.libs -Wl,--rpath -Wl,/usr/local/lib - 
Wl,--rpath -Wl,/usr/local/lib -L/usr/local/lib ../ 
libclamunrar_iface/.libs/libclamunrar_iface.so -L/usr/ports/security/ 
clamav/work/clamav-0.94/libclamunrar/.libs -lbz2 /usr/local/lib/ 
libgmp.so -lthr -lz  -Wl,--version-script -Wl,../libclamav/ 
libclamav.map -Wl,-soname -Wl,libclamav.so.5 -o .libs/libclamav.so.5
(cd .libs && rm -f libclamav.so && ln -s libclamav.so.5 libclamav.so)
(cd .libs && rm -f libclamav.so && ln -s libclamav.so.5 libclamav.so)
rm -fr .libs/libclamav.lax
mkdir .libs/libclamav.lax
rm -fr .libs/libclamav.lax/liblzma.a
mkdir .libs/libclamav.lax/liblzma.a
(cd .libs/libclamav.lax/liblzma.a && ar x /usr/ports/security/clamav/ 
work/clamav-0.94/libclamav/lzma/.libs/liblzma.a)
ar cru .libs/libclamav.a  matcher-ac.o matcher-bm.o matcher.o md5.o  
others.o readdb.o cvd.o dsig.o str.o scanners.o textdet.o filetypes.o  
rtf.o blob.o mbox.o message.o table.o text.o ole2_extract.o  
vba_extract.o msexpand.o pe.o disasm.o upx.o htmlnorm.o chmunpack.o  
rebuildpe.o petite.o wwunpack.o unsp.o aspack.o packlibs.o fsg.o mew.o  
upack.o line.o untar.o unzip.o inflate64.o spec