Re: [clamav-users] Problem configuring clamav-0.99
Ali / Todd, Thanks for the updates, I am looking into what is the possible cause for the "Structure packing" error. What are your compiler versions? Steve On Wed, Dec 16, 2015 at 2:53 PM, Todd Aikenwrote: > HI Steve, thanks for your reply. > > I did install a new version of PCRE to the directory /usr/local/pcre > (configured it with --prefix=/usr/local/prce so as to not interfere with > the older installed pcre), and told clamav's configure to use it with the > line --with-pcre=/usr/local/pcre. This is what got me to the "configure: > error: Structure packing seems to be available, but is not working with > this compiler", which is the same issue that ali atik is having. > > > > Todd A. Aiken > Systems Analyst & Administrator > ITS Department > BISHOP'S UNIVERSITY > 2600 College Street > Sherbrooke, Quebec > CANADA J1M 1Z7 > > > > > > > > > -Original Message- > From: clamav-users on behalf of > Steven Morgan > Reply-To: ClamAV users ML > Date: Wednesday, December 16, 2015 at 2:43 PM > To: ClamAV users ML > Subject: Re: [clamav-users] Problem configuring clamav-0.99 > > >Todd, > > > >PCRE support is new in ClamAV 0.99 and ./configure looks for it by > default. > >So in your case it found an old version of pcre which is incompatible with > >ClamAV 0.99. Minimum PCRE version checks have been added for the upcoming > >0.99.1 release. For installing 0.99 on your system, you will either need > to > >use './configure --with-pcre=no ...' or install a more current version of > >PCRE. > > > >Steve > > > >On Mon, Dec 7, 2015 at 1:25 PM, Todd Aiken > wrote: > > > >> -Original Message- > >> > >> > >> From: clamav-users on behalf > of " > >> a...@cerist.dz" > >> Reply-To: ClamAV users ML > >> Date: Monday, December 7, 2015 at 12:25 PM > >> To: ClamAV users ML > >> Subject: Re: [clamav-users] Problem configuring clamav-0.99 > >> > >> >checking bzlib.h presence... yes > >> >checking for bzlib.h... yes > >> >checking for CVE-2008-1372... linkfailed > >> >configure: WARNING: ** Unable to link bzip2 testcase > >> >configure: WARNING: ** You may be affected by CVE-2008-1372 bug, > but I > >> >need to be able to link a testcase to verify > >> >configure: WARNING: ** It is recommended to fix your build > environment > >> >so that we can run the testcase! > >> >configure: WARNING: ** Please do not report stability problems to > the > >> >ClamAV developers! > >> >checking for CVE-2010-0405... linkfailed > >> >configure: WARNING: ** Unable to link bzip2 testcase > >> >configure: WARNING: ** You may be affected by CVE-2010-0405 bug, > but I > >> >need to be able to link a testcase to verify > >> >configure: WARNING: ** It is recommended to fix your build > environment > >> >so that we can run the testcase! > >> >configure: WARNING: ** Please do not report stability problems to > the > >> >ClamAV developers! > >> >checking for getaddrinfo... no > >> > >> -snip- > >> > >> >checking for type aligning via __attribute__((aligned))... yes > >> >checking that structure packing works... no > >> >configure: error: Structure packing seems to be available, but is not > >> >working with this compiler > >> > >> I am having the exact same issue with trying to compile on an old > >> Slackware server (running Slackware 10.2.0). I had to install an > updated > >> version of pcre in order to get past a different compiling issue, and > >> installed the new version to /usr/local/pcre with the configure > parameter > >> --prefix=/usr/local/pcre, but when I try to configure clamav-0.99 using > >> --with-pcre=/usr/local/pcre, I get this same structure error. Here is > the > >> full configure line I am using for clamav-0.99: > >> > >> ./configure --prefix=/usr --sysconfdir=/etc --disable-llvm > --disable-ipv6 > >> --with-openssl=/usr/local/ssl --with-pcre=/usr/local/pcre > >> > >> Removing --with-pcre=/usr/local/pcre, configure completes successfully, > >> but then I get this when I run make: > >> > >> CC libclamav_la-matcher-pcre.lo > >> matcher-pcre.c: In function `cli_pcre_scanbuf': > >> matcher-pcre.c:740: error: `PCRE_ERROR_RECURSIONLIMIT' undeclared (first > >> use in this function) > >> matcher-pcre.c:740: error: (Each undeclared identifier is reported only > >> once > >> matcher-pcre.c:740: error: for each function it appears in.) > >> make[4]: *** [libclamav_la-matcher-pcre.lo] Error 1 > >> make[4]: Leaving directory `/usr/src/software/clamav-0.99/libclamav' > >> make[3]: *** [all-recursive] Error 1 > >> make[3]: Leaving directory `/usr/src/software/clamav-0.99/libclamav' > >> make[2]: *** [all] Error 2 > >> make[2]: Leaving directory `/usr/src/software/clamav-0.99/libclamav' > >> make[1]:
Re: [clamav-users] Problem configuring clamav-0.99
HI Steve, thanks for your reply. I did install a new version of PCRE to the directory /usr/local/pcre (configured it with --prefix=/usr/local/prce so as to not interfere with the older installed pcre), and told clamav's configure to use it with the line --with-pcre=/usr/local/pcre. This is what got me to the "configure: error: Structure packing seems to be available, but is not working with this compiler", which is the same issue that ali atik is having. Todd A. Aiken Systems Analyst & Administrator ITS Department BISHOP'S UNIVERSITY 2600 College Street Sherbrooke, Quebec CANADA J1M 1Z7 -Original Message- From: clamav-userson behalf of Steven Morgan Reply-To: ClamAV users ML Date: Wednesday, December 16, 2015 at 2:43 PM To: ClamAV users ML Subject: Re: [clamav-users] Problem configuring clamav-0.99 >Todd, > >PCRE support is new in ClamAV 0.99 and ./configure looks for it by default. >So in your case it found an old version of pcre which is incompatible with >ClamAV 0.99. Minimum PCRE version checks have been added for the upcoming >0.99.1 release. For installing 0.99 on your system, you will either need to >use './configure --with-pcre=no ...' or install a more current version of >PCRE. > >Steve > >On Mon, Dec 7, 2015 at 1:25 PM, Todd Aiken wrote: > >> -Original Message- >> >> >> From: clamav-users on behalf of " >> a...@cerist.dz" >> Reply-To: ClamAV users ML >> Date: Monday, December 7, 2015 at 12:25 PM >> To: ClamAV users ML >> Subject: Re: [clamav-users] Problem configuring clamav-0.99 >> >> >checking bzlib.h presence... yes >> >checking for bzlib.h... yes >> >checking for CVE-2008-1372... linkfailed >> >configure: WARNING: ** Unable to link bzip2 testcase >> >configure: WARNING: ** You may be affected by CVE-2008-1372 bug, but I >> >need to be able to link a testcase to verify >> >configure: WARNING: ** It is recommended to fix your build environment >> >so that we can run the testcase! >> >configure: WARNING: ** Please do not report stability problems to the >> >ClamAV developers! >> >checking for CVE-2010-0405... linkfailed >> >configure: WARNING: ** Unable to link bzip2 testcase >> >configure: WARNING: ** You may be affected by CVE-2010-0405 bug, but I >> >need to be able to link a testcase to verify >> >configure: WARNING: ** It is recommended to fix your build environment >> >so that we can run the testcase! >> >configure: WARNING: ** Please do not report stability problems to the >> >ClamAV developers! >> >checking for getaddrinfo... no >> >> -snip- >> >> >checking for type aligning via __attribute__((aligned))... yes >> >checking that structure packing works... no >> >configure: error: Structure packing seems to be available, but is not >> >working with this compiler >> >> I am having the exact same issue with trying to compile on an old >> Slackware server (running Slackware 10.2.0). I had to install an updated >> version of pcre in order to get past a different compiling issue, and >> installed the new version to /usr/local/pcre with the configure parameter >> --prefix=/usr/local/pcre, but when I try to configure clamav-0.99 using >> --with-pcre=/usr/local/pcre, I get this same structure error. Here is the >> full configure line I am using for clamav-0.99: >> >> ./configure --prefix=/usr --sysconfdir=/etc --disable-llvm --disable-ipv6 >> --with-openssl=/usr/local/ssl --with-pcre=/usr/local/pcre >> >> Removing --with-pcre=/usr/local/pcre, configure completes successfully, >> but then I get this when I run make: >> >> CC libclamav_la-matcher-pcre.lo >> matcher-pcre.c: In function `cli_pcre_scanbuf': >> matcher-pcre.c:740: error: `PCRE_ERROR_RECURSIONLIMIT' undeclared (first >> use in this function) >> matcher-pcre.c:740: error: (Each undeclared identifier is reported only >> once >> matcher-pcre.c:740: error: for each function it appears in.) >> make[4]: *** [libclamav_la-matcher-pcre.lo] Error 1 >> make[4]: Leaving directory `/usr/src/software/clamav-0.99/libclamav' >> make[3]: *** [all-recursive] Error 1 >> make[3]: Leaving directory `/usr/src/software/clamav-0.99/libclamav' >> make[2]: *** [all] Error 2 >> make[2]: Leaving directory `/usr/src/software/clamav-0.99/libclamav' >> make[1]: *** [all-recursive] Error 1 >> make[1]: Leaving directory `/usr/src/software/clamav-0.99' >> make: *** [all] Error 2 >> >> (This is with PCRE version 6.4 that came with Slackware 10.2.0) >> >> As with the original poster, clamav-0.98.7 compiled fine on this same >> server and is currently running there. >> ___ Help us build a comprehensive ClamAV guide: https://github.com/vrtadmin/clamav-faq
Re: [clamav-users] Problem configuring clamav-0.99
Todd, PCRE support is new in ClamAV 0.99 and ./configure looks for it by default. So in your case it found an old version of pcre which is incompatible with ClamAV 0.99. Minimum PCRE version checks have been added for the upcoming 0.99.1 release. For installing 0.99 on your system, you will either need to use './configure --with-pcre=no ...' or install a more current version of PCRE. Steve On Mon, Dec 7, 2015 at 1:25 PM, Todd Aikenwrote: > -Original Message- > > > From: clamav-users on behalf of " > a...@cerist.dz" > Reply-To: ClamAV users ML > Date: Monday, December 7, 2015 at 12:25 PM > To: ClamAV users ML > Subject: Re: [clamav-users] Problem configuring clamav-0.99 > > >checking bzlib.h presence... yes > >checking for bzlib.h... yes > >checking for CVE-2008-1372... linkfailed > >configure: WARNING: ** Unable to link bzip2 testcase > >configure: WARNING: ** You may be affected by CVE-2008-1372 bug, but I > >need to be able to link a testcase to verify > >configure: WARNING: ** It is recommended to fix your build environment > >so that we can run the testcase! > >configure: WARNING: ** Please do not report stability problems to the > >ClamAV developers! > >checking for CVE-2010-0405... linkfailed > >configure: WARNING: ** Unable to link bzip2 testcase > >configure: WARNING: ** You may be affected by CVE-2010-0405 bug, but I > >need to be able to link a testcase to verify > >configure: WARNING: ** It is recommended to fix your build environment > >so that we can run the testcase! > >configure: WARNING: ** Please do not report stability problems to the > >ClamAV developers! > >checking for getaddrinfo... no > > -snip- > > >checking for type aligning via __attribute__((aligned))... yes > >checking that structure packing works... no > >configure: error: Structure packing seems to be available, but is not > >working with this compiler > > I am having the exact same issue with trying to compile on an old > Slackware server (running Slackware 10.2.0). I had to install an updated > version of pcre in order to get past a different compiling issue, and > installed the new version to /usr/local/pcre with the configure parameter > --prefix=/usr/local/pcre, but when I try to configure clamav-0.99 using > --with-pcre=/usr/local/pcre, I get this same structure error. Here is the > full configure line I am using for clamav-0.99: > > ./configure --prefix=/usr --sysconfdir=/etc --disable-llvm --disable-ipv6 > --with-openssl=/usr/local/ssl --with-pcre=/usr/local/pcre > > Removing --with-pcre=/usr/local/pcre, configure completes successfully, > but then I get this when I run make: > > CC libclamav_la-matcher-pcre.lo > matcher-pcre.c: In function `cli_pcre_scanbuf': > matcher-pcre.c:740: error: `PCRE_ERROR_RECURSIONLIMIT' undeclared (first > use in this function) > matcher-pcre.c:740: error: (Each undeclared identifier is reported only > once > matcher-pcre.c:740: error: for each function it appears in.) > make[4]: *** [libclamav_la-matcher-pcre.lo] Error 1 > make[4]: Leaving directory `/usr/src/software/clamav-0.99/libclamav' > make[3]: *** [all-recursive] Error 1 > make[3]: Leaving directory `/usr/src/software/clamav-0.99/libclamav' > make[2]: *** [all] Error 2 > make[2]: Leaving directory `/usr/src/software/clamav-0.99/libclamav' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/usr/src/software/clamav-0.99' > make: *** [all] Error 2 > > (This is with PCRE version 6.4 that came with Slackware 10.2.0) > > As with the original poster, clamav-0.98.7 compiled fine on this same > server and is currently running there. > > > Thanks. > > > Todd A. Aiken > Systems Analyst & Administrator > ITS Department > BISHOP'S UNIVERSITY > 2600 College Street > Sherbrooke, Quebec > CANADA J1M 1Z7 > > > > ___ > Help us build a comprehensive ClamAV guide: > https://github.com/vrtadmin/clamav-faq > > http://www.clamav.net/contact.html#ml > ___ Help us build a comprehensive ClamAV guide: https://github.com/vrtadmin/clamav-faq http://www.clamav.net/contact.html#ml
Re: [clamav-users] Problem configuring clamav-0.99
> bzip2 1.0.5 looks kind of old. Can you try a more current version? Hi Steven i dont think it is an bzip2 problem because when i have tried to configure my clamav without bzip2 (--disable-bzip2 option), i 've got nothing changed (same error) [root@mail clamav-0.99]# ./configure --disable-llvm --enable-check --enable-clamdtop --with-user=clamav --with-group=clamav --enable-experimental --disable-bzip2 checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu creating target.h - canonical system defines checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking how to create a ustar tar archive... gnutar checking whether make supports nested variables... yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define __EXTENSIONS__... yes checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1966080 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert i686-pc-linux-gnu file names to i686-pc-linux-gnu format... func_convert_file_noop checking how to convert i686-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... no checking if : is a manifest tool... no checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... yes checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking which extension is used for runtime loadable modules... .so checking which variable specifies run-time module search path... LD_LIBRARY_PATH checking for the default library search path... /lib /usr/lib /usr/lib/mysql /usr/lib/qt-3.3/lib /usr/lib/xulrunner checking for library containing dlopen... -ldl checking for dlerror... yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dld_link in -ldld... no checking for _ prefix in compiled symbols... no checking whether deplibs are
Re: [clamav-users] Problem configuring clamav-0.99
Ali, Please look in your config.log file for Structure packing. Do you have the same or similar error? configure:20381: checking that structure packing works configure:20438: gcc -o conftest -g -O2 -I/opt/pcre837/include -L/opt/pcre837/lib -lpcre conftest.c -ldl >&5 conftest.c:147: warning: 'packed' attribute ignored for field of type 'char' configure:20438: $? = 0 configure:20438: ./conftest ./conftest: error while loading shared libraries: libpcre.so.1: cannot open shared object file: No such file or directory This is the conftest for "structure packing" failing because it cannot link to the pcre shared library. If this is the case, I can suggest looking into using ldconfig or setting the environment variable LD_LIBRARY_PATH to resolve the link issue, and then configure ClamAV. Hope this helps, Steve On Wed, Dec 16, 2015 at 3:00 PM, Steven Morganwrote: > Ali / Todd, > > Thanks for the updates, I am looking into what is the possible cause for > the "Structure packing" error. > > What are your compiler versions? > > Steve > > On Wed, Dec 16, 2015 at 2:53 PM, Todd Aiken > wrote: > >> HI Steve, thanks for your reply. >> >> I did install a new version of PCRE to the directory /usr/local/pcre >> (configured it with --prefix=/usr/local/prce so as to not interfere with >> the older installed pcre), and told clamav's configure to use it with the >> line --with-pcre=/usr/local/pcre. This is what got me to the "configure: >> error: Structure packing seems to be available, but is not working with >> this compiler", which is the same issue that ali atik is having. >> >> >> >> Todd A. Aiken >> Systems Analyst & Administrator >> ITS Department >> BISHOP'S UNIVERSITY >> 2600 College Street >> Sherbrooke, Quebec >> CANADA J1M 1Z7 >> >> >> >> >> >> >> >> >> -Original Message- >> From: clamav-users on behalf of >> Steven Morgan >> Reply-To: ClamAV users ML >> Date: Wednesday, December 16, 2015 at 2:43 PM >> To: ClamAV users ML >> Subject: Re: [clamav-users] Problem configuring clamav-0.99 >> >> >Todd, >> > >> >PCRE support is new in ClamAV 0.99 and ./configure looks for it by >> default. >> >So in your case it found an old version of pcre which is incompatible >> with >> >ClamAV 0.99. Minimum PCRE version checks have been added for the upcoming >> >0.99.1 release. For installing 0.99 on your system, you will either need >> to >> >use './configure --with-pcre=no ...' or install a more current version of >> >PCRE. >> > >> >Steve >> > >> >On Mon, Dec 7, 2015 at 1:25 PM, Todd Aiken >> wrote: >> > >> >> -Original Message- >> >> >> >> >> >> From: clamav-users on behalf >> of " >> >> a...@cerist.dz" >> >> Reply-To: ClamAV users ML >> >> Date: Monday, December 7, 2015 at 12:25 PM >> >> To: ClamAV users ML >> >> Subject: Re: [clamav-users] Problem configuring clamav-0.99 >> >> >> >> >checking bzlib.h presence... yes >> >> >checking for bzlib.h... yes >> >> >checking for CVE-2008-1372... linkfailed >> >> >configure: WARNING: ** Unable to link bzip2 testcase >> >> >configure: WARNING: ** You may be affected by CVE-2008-1372 bug, >> but I >> >> >need to be able to link a testcase to verify >> >> >configure: WARNING: ** It is recommended to fix your build >> environment >> >> >so that we can run the testcase! >> >> >configure: WARNING: ** Please do not report stability problems to >> the >> >> >ClamAV developers! >> >> >checking for CVE-2010-0405... linkfailed >> >> >configure: WARNING: ** Unable to link bzip2 testcase >> >> >configure: WARNING: ** You may be affected by CVE-2010-0405 bug, >> but I >> >> >need to be able to link a testcase to verify >> >> >configure: WARNING: ** It is recommended to fix your build >> environment >> >> >so that we can run the testcase! >> >> >configure: WARNING: ** Please do not report stability problems to >> the >> >> >ClamAV developers! >> >> >checking for getaddrinfo... no >> >> >> >> -snip- >> >> >> >> >checking for type aligning via __attribute__((aligned))... yes >> >> >checking that structure packing works... no >> >> >configure: error: Structure packing seems to be available, but is not >> >> >working with this compiler >> >> >> >> I am having the exact same issue with trying to compile on an old >> >> Slackware server (running Slackware 10.2.0). I had to install an >> updated >> >> version of pcre in order to get past a different compiling issue, and >> >> installed the new version to /usr/local/pcre with the configure >> parameter >> >> --prefix=/usr/local/pcre, but when I try to configure clamav-0.99 using >> >> --with-pcre=/usr/local/pcre, I get this same structure error. Here is >> the >> >> full configure