Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On Sun, 23 Nov 2008 06:58:25 GMT Mark <[EMAIL PROTECTED]> wrote: [snip] >With that out of the way, my cool FreeBSD 4.11 has survived yet another >version of clamav. :) It gets a little harder every time, but still. But why? -- Jerry [EMAIL PROTECTED] It is now 10 p.m. Do you know where Henry Kissinger is? Elizabeth Carpenter signature.asc Description: PGP signature ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
-Original Message- From: Mark [mailto:[EMAIL PROTECTED] Sent: zondag 23 november 2008 7:31 To: 'ClamAV users ML' Subject: Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Odhiambo Washington Sent: vrijdag 14 november 2008 13:59 To: ClamAV users ML Subject: Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5 > I did this, too (actually, figured it out on my own, lol, before I > realized it might be on the list as well). So, everything compiles > properly now. > My clamd, however, is still not working; it kinda hangs when you query > the socket. Very reminiscent of a fork-problem on OpenBSD on clamav of > a few releases back. There was a patch, or trick for it, to get around > that. Does it exist for 0.94.1 too? Oh, for frak's sake, I'm an idiot. :) I had written a maildir test prog that first waits for 3 minutes (to lose any open pop3 connection). So, no wonder it hang, LOL. With that out of the way, my cool FreeBSD 4.11 has survived yet another version of clamav. :) It gets a little harder every time, but still. - Mark ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Odhiambo Washington Sent: vrijdag 14 november 2008 13:59 To: ClamAV users ML Subject: Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5 > Bah. Upgrade your ports and edit the port Makefile. Delete > --enable-gethostbyname_r under CONFIGURE_ARGS= and change > PTHREAD_LIBS= -lthr to PTHREAD_LIBS= -pthread. Works with my 5.5. I did this, too (actually, figured it out on my own, lol, before I realized it might be on the list as well). So, everything compiles properly now. My clamd, however, is still not working; it kinda hangs when you query the socket. Very reminiscent of a fork-problem on OpenBSD on clamav of a few releases back. There was a patch, or trick for it, to get around that. Does it exist for 0.94.1 too? Thanks ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On Sun, Nov 16, 2008 at 15:31, Jerry <[EMAIL PROTECTED]> wrote: <---SNIP---> > In any case, FreeBSD-5.5 is quite old and I believe no longer > supported, although I might be wrong about that. FreeBSD 5.5, the last in the FreeBSD 5.x series, reached EOL in March 2008. -- Please keep list traffic on the list. Rob MacGregor Whoever fights monsters should see to it that in the process he doesn't become a monster. Friedrich Nietzsche ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On Fri, 14 Nov 2008 14:50:08 +0100 [EMAIL PROTECTED] (Jürgen Dankoweit) wrote: [snip] >I'm working about 15 years with FreeBSD. The ports tree is one of the >weak points of the operating system. After updating the ports tree and >then compiling clamav, some other libraries were "updated" too. I have >seen this with my eyes! No likely. Are you using a utility such as 'portmanager' or 'portupgrade' to upgrade ClamAV? Could you be more specific and list the libraries that are affected? Better yet, run 'script' when you do an update and then we can examine it to see what the problem is. In any case, FreeBSD-5.5 is quite old and I believe no longer supported, although I might be wrong about that. -- Jerry [EMAIL PROTECTED] Forty isn't old, if you're a tree. signature.asc Description: PGP signature ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On Fri, Nov 14, 2008 at 4:50 PM, Jürgen Dankoweit < [EMAIL PROTECTED]> wrote: > > Am Freitag, den 14.11.2008, 16:43 +0300 schrieb Odhiambo Washington: > > On Fri, Nov 14, 2008 at 4:34 PM, Jürgen Dankoweit < > > [EMAIL PROTECTED]> wrote: > > > > > > > > Am Freitag, den 14.11.2008, 15:58 +0300 schrieb Odhiambo Washington: > > > > On Fri, Nov 14, 2008 at 3:40 PM, Jürgen Dankoweit < > > > > [EMAIL PROTECTED]> wrote: > > > > > > > > > Hallo Steven, > > > > > > > > > > Am Donnerstag, den 13.11.2008, 11:03 -0700 schrieb > [EMAIL PROTECTED]: > > > > > > Juergen Dankoweit wrote: > > > > > > > > > > > > > Because the ports tree is unupgradable I must use the original > > > source > > > > > > > from the web site. I compile clamav with the following options: > > > > > > > ./configure --disable-clamuko --disable-ipv6 > > > > > > > > > > > > Bah. Upgrade your ports and edit the port Makefile. Delete > > > > > > --enable-gethostbyname_r under CONFIGURE_ARGS= and change > > > > > > PTHREAD_LIBS= -lthr to PTHREAD_LIBS= -pthread. Works with my > 5.5. > > > > > > > > > > > > Steven > > > > > > > > > > Thanks for the answer. > > > > > > > > > > I have the Makefile edited. Now I get this: > > > > > > > > > > # make > > > > > ===> Vulnerability check disabled, database not found > > > > > ===> Found saved configuration for clamav-0.94.1 > > > > > ===> Extracting for clamav-0.94.1 > > > > > => MD5 Checksum OK for clamav-0.94.1.tar.gz. > > > > > => SHA256 Checksum OK for clamav-0.94.1.tar.gz. > > > > > ===> Patching for clamav-0.94.1 > > > > > ===> Applying FreeBSD patches for clamav-0.94.1 > > > > > File to patch: > > > > > > > > > > And now? > > > > > > > > > > As I wrote in the original posting the ports tree is unupgradable, > > > > > because portsnap destroyed the most. > > > > > > > > > > > > > Hi Jürgen > > > > > > > > Please use cvsup or csup to upgrade your ports tree. I use csup via > cron > > > and > > > > I have never had a major problem, except where the OS version has > been an > > > > issue when compiling a port, like I had with this version of Clamav. > > > > Give portsnap a break for now if it doesn't help you. > > > > > > > > > > I have done this, too. After that many applications didn't run anymore > > > because some libraries were updated. Thanks god I had a backup of the > > > whole system. > > > > > > I have installed clamav 0.93.3 again. > > > > > > Thanks for all answers and all the help. > > > > > > FreeBSD ports update does NOT affect the system at all! You are damn > wrong > > on this, to an extent I think you are not that familiar with FreeBSD. > > I am offering you one thing: Give me access to your system and I will fix > > whatever it is that the update of the ports tree breaks. > > I'm working about 15 years with FreeBSD. The ports tree is one of the > weak points of the operating system. After updating the ports tree and > then compiling clamav, some other libraries were "updated" too. I have > seen this with my eyes! Not possible, except for those related to Clamav. Not system libraries. I've only used FreeBSD since 1999 and I make a livng out of building servers from it. My offer stands though. It doesn't mean anything. I just want to help. The changes to the Makefile that were posted work very well. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "Oh My God! They killed init! You Bastards!" --from a /. post ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
Am Freitag, den 14.11.2008, 16:43 +0300 schrieb Odhiambo Washington: > On Fri, Nov 14, 2008 at 4:34 PM, Jürgen Dankoweit < > [EMAIL PROTECTED]> wrote: > > > > > Am Freitag, den 14.11.2008, 15:58 +0300 schrieb Odhiambo Washington: > > > On Fri, Nov 14, 2008 at 3:40 PM, Jürgen Dankoweit < > > > [EMAIL PROTECTED]> wrote: > > > > > > > Hallo Steven, > > > > > > > > Am Donnerstag, den 13.11.2008, 11:03 -0700 schrieb [EMAIL PROTECTED]: > > > > > Juergen Dankoweit wrote: > > > > > > > > > > > Because the ports tree is unupgradable I must use the original > > source > > > > > > from the web site. I compile clamav with the following options: > > > > > > ./configure --disable-clamuko --disable-ipv6 > > > > > > > > > > Bah. Upgrade your ports and edit the port Makefile. Delete > > > > > --enable-gethostbyname_r under CONFIGURE_ARGS= and change > > > > > PTHREAD_LIBS= -lthr to PTHREAD_LIBS= -pthread. Works with my 5.5. > > > > > > > > > > Steven > > > > > > > > Thanks for the answer. > > > > > > > > I have the Makefile edited. Now I get this: > > > > > > > > # make > > > > ===> Vulnerability check disabled, database not found > > > > ===> Found saved configuration for clamav-0.94.1 > > > > ===> Extracting for clamav-0.94.1 > > > > => MD5 Checksum OK for clamav-0.94.1.tar.gz. > > > > => SHA256 Checksum OK for clamav-0.94.1.tar.gz. > > > > ===> Patching for clamav-0.94.1 > > > > ===> Applying FreeBSD patches for clamav-0.94.1 > > > > File to patch: > > > > > > > > And now? > > > > > > > > As I wrote in the original posting the ports tree is unupgradable, > > > > because portsnap destroyed the most. > > > > > > > > > > Hi Jürgen > > > > > > Please use cvsup or csup to upgrade your ports tree. I use csup via cron > > and > > > I have never had a major problem, except where the OS version has been an > > > issue when compiling a port, like I had with this version of Clamav. > > > Give portsnap a break for now if it doesn't help you. > > > > > > > I have done this, too. After that many applications didn't run anymore > > because some libraries were updated. Thanks god I had a backup of the > > whole system. > > > > I have installed clamav 0.93.3 again. > > > > Thanks for all answers and all the help. > > > FreeBSD ports update does NOT affect the system at all! You are damn wrong > on this, to an extent I think you are not that familiar with FreeBSD. > I am offering you one thing: Give me access to your system and I will fix > whatever it is that the update of the ports tree breaks. I'm working about 15 years with FreeBSD. The ports tree is one of the weak points of the operating system. After updating the ports tree and then compiling clamav, some other libraries were "updated" too. I have seen this with my eyes! ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On Fri, Nov 14, 2008 at 4:34 PM, Jürgen Dankoweit < [EMAIL PROTECTED]> wrote: > > Am Freitag, den 14.11.2008, 15:58 +0300 schrieb Odhiambo Washington: > > On Fri, Nov 14, 2008 at 3:40 PM, Jürgen Dankoweit < > > [EMAIL PROTECTED]> wrote: > > > > > Hallo Steven, > > > > > > Am Donnerstag, den 13.11.2008, 11:03 -0700 schrieb [EMAIL PROTECTED]: > > > > Juergen Dankoweit wrote: > > > > > > > > > Because the ports tree is unupgradable I must use the original > source > > > > > from the web site. I compile clamav with the following options: > > > > > ./configure --disable-clamuko --disable-ipv6 > > > > > > > > Bah. Upgrade your ports and edit the port Makefile. Delete > > > > --enable-gethostbyname_r under CONFIGURE_ARGS= and change > > > > PTHREAD_LIBS= -lthr to PTHREAD_LIBS= -pthread. Works with my 5.5. > > > > > > > > Steven > > > > > > Thanks for the answer. > > > > > > I have the Makefile edited. Now I get this: > > > > > > # make > > > ===> Vulnerability check disabled, database not found > > > ===> Found saved configuration for clamav-0.94.1 > > > ===> Extracting for clamav-0.94.1 > > > => MD5 Checksum OK for clamav-0.94.1.tar.gz. > > > => SHA256 Checksum OK for clamav-0.94.1.tar.gz. > > > ===> Patching for clamav-0.94.1 > > > ===> Applying FreeBSD patches for clamav-0.94.1 > > > File to patch: > > > > > > And now? > > > > > > As I wrote in the original posting the ports tree is unupgradable, > > > because portsnap destroyed the most. > > > > > > > Hi Jürgen > > > > Please use cvsup or csup to upgrade your ports tree. I use csup via cron > and > > I have never had a major problem, except where the OS version has been an > > issue when compiling a port, like I had with this version of Clamav. > > Give portsnap a break for now if it doesn't help you. > > > > I have done this, too. After that many applications didn't run anymore > because some libraries were updated. Thanks god I had a backup of the > whole system. > > I have installed clamav 0.93.3 again. > > Thanks for all answers and all the help. FreeBSD ports update does NOT affect the system at all! You are damn wrong on this, to an extent I think you are not that familiar with FreeBSD. I am offering you one thing: Give me access to your system and I will fix whatever it is that the update of the ports tree breaks. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "Oh My God! They killed init! You Bastards!" --from a /. post ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
Am Freitag, den 14.11.2008, 15:58 +0300 schrieb Odhiambo Washington: > On Fri, Nov 14, 2008 at 3:40 PM, Jürgen Dankoweit < > [EMAIL PROTECTED]> wrote: > > > Hallo Steven, > > > > Am Donnerstag, den 13.11.2008, 11:03 -0700 schrieb [EMAIL PROTECTED]: > > > Juergen Dankoweit wrote: > > > > > > > Because the ports tree is unupgradable I must use the original source > > > > from the web site. I compile clamav with the following options: > > > > ./configure --disable-clamuko --disable-ipv6 > > > > > > Bah. Upgrade your ports and edit the port Makefile. Delete > > > --enable-gethostbyname_r under CONFIGURE_ARGS= and change > > > PTHREAD_LIBS= -lthr to PTHREAD_LIBS= -pthread. Works with my 5.5. > > > > > > Steven > > > > Thanks for the answer. > > > > I have the Makefile edited. Now I get this: > > > > # make > > ===> Vulnerability check disabled, database not found > > ===> Found saved configuration for clamav-0.94.1 > > ===> Extracting for clamav-0.94.1 > > => MD5 Checksum OK for clamav-0.94.1.tar.gz. > > => SHA256 Checksum OK for clamav-0.94.1.tar.gz. > > ===> Patching for clamav-0.94.1 > > ===> Applying FreeBSD patches for clamav-0.94.1 > > File to patch: > > > > And now? > > > > As I wrote in the original posting the ports tree is unupgradable, > > because portsnap destroyed the most. > > > > Hi Jürgen > > Please use cvsup or csup to upgrade your ports tree. I use csup via cron and > I have never had a major problem, except where the OS version has been an > issue when compiling a port, like I had with this version of Clamav. > Give portsnap a break for now if it doesn't help you. > I have done this, too. After that many applications didn't run anymore because some libraries were updated. Thanks god I had a backup of the whole system. I have installed clamav 0.93.3 again. Thanks for all answers and all the help. Best regards J.D. ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On Fri, Nov 14, 2008 at 3:40 PM, Jürgen Dankoweit < [EMAIL PROTECTED]> wrote: > Hallo Steven, > > Am Donnerstag, den 13.11.2008, 11:03 -0700 schrieb [EMAIL PROTECTED]: > > Juergen Dankoweit wrote: > > > > > Because the ports tree is unupgradable I must use the original source > > > from the web site. I compile clamav with the following options: > > > ./configure --disable-clamuko --disable-ipv6 > > > > Bah. Upgrade your ports and edit the port Makefile. Delete > > --enable-gethostbyname_r under CONFIGURE_ARGS= and change > > PTHREAD_LIBS= -lthr to PTHREAD_LIBS= -pthread. Works with my 5.5. > > > > Steven > > Thanks for the answer. > > I have the Makefile edited. Now I get this: > > # make > ===> Vulnerability check disabled, database not found > ===> Found saved configuration for clamav-0.94.1 > ===> Extracting for clamav-0.94.1 > => MD5 Checksum OK for clamav-0.94.1.tar.gz. > => SHA256 Checksum OK for clamav-0.94.1.tar.gz. > ===> Patching for clamav-0.94.1 > ===> Applying FreeBSD patches for clamav-0.94.1 > File to patch: > > And now? > > As I wrote in the original posting the ports tree is unupgradable, > because portsnap destroyed the most. > Hi Jürgen Please use cvsup or csup to upgrade your ports tree. I use csup via cron and I have never had a major problem, except where the OS version has been an issue when compiling a port, like I had with this version of Clamav. Give portsnap a break for now if it doesn't help you. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "Oh My God! They killed init! You Bastards!" --from a /. post ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On 2008-11-13 21:49, Odhiambo Washington wrote: > On Thu, Nov 13, 2008 at 9:03 PM, <[EMAIL PROTECTED]> wrote: > > >> Juergen Dankoweit wrote: >> >> >>> Because the ports tree is unupgradable I must use the original source >>> from the web site. I compile clamav with the following options: >>> ./configure --disable-clamuko --disable-ipv6 >>> >> Bah. Upgrade your ports and edit the port Makefile. Delete >> --enable-gethostbyname_r under CONFIGURE_ARGS= and change >> PTHREAD_LIBS= -lthr to PTHREAD_LIBS= -pthread. Works with my 5.5. >> >> > > Hello Steven, > > You are a star! This works perfectly. > Hi, I have added this info to the wiki: https://wiki.clamav.net/Main/FreeBSDInstall Please add further info about FreeBSD 5.5 to the wiki too. Best regards, --Edwin ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
Hallo Steven, Am Donnerstag, den 13.11.2008, 11:03 -0700 schrieb [EMAIL PROTECTED]: > Juergen Dankoweit wrote: > > > Because the ports tree is unupgradable I must use the original source > > from the web site. I compile clamav with the following options: > > ./configure --disable-clamuko --disable-ipv6 > > Bah. Upgrade your ports and edit the port Makefile. Delete > --enable-gethostbyname_r under CONFIGURE_ARGS= and change > PTHREAD_LIBS= -lthr to PTHREAD_LIBS= -pthread. Works with my 5.5. > > Steven Thanks for the answer. I have the Makefile edited. Now I get this: # make ===> Vulnerability check disabled, database not found ===> Found saved configuration for clamav-0.94.1 ===> Extracting for clamav-0.94.1 => MD5 Checksum OK for clamav-0.94.1.tar.gz. => SHA256 Checksum OK for clamav-0.94.1.tar.gz. ===> Patching for clamav-0.94.1 ===> Applying FreeBSD patches for clamav-0.94.1 File to patch: And now? As I wrote in the original posting the ports tree is unupgradable, because portsnap destroyed the most. Best regards Jürgen ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On Thu, Nov 13, 2008 at 9:03 PM, <[EMAIL PROTECTED]> wrote: > Juergen Dankoweit wrote: > > > Because the ports tree is unupgradable I must use the original source > > from the web site. I compile clamav with the following options: > > ./configure --disable-clamuko --disable-ipv6 > > Bah. Upgrade your ports and edit the port Makefile. Delete > --enable-gethostbyname_r under CONFIGURE_ARGS= and change > PTHREAD_LIBS= -lthr to PTHREAD_LIBS= -pthread. Works with my 5.5. > Hello Steven, You are a star! This works perfectly. Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "Oh My God! They killed init! You Bastards!" --from a /. post ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
Juergen Dankoweit wrote: > Because the ports tree is unupgradable I must use the original source > from the web site. I compile clamav with the following options: > ./configure --disable-clamuko --disable-ipv6 Bah. Upgrade your ports and edit the port Makefile. Delete --enable-gethostbyname_r under CONFIGURE_ARGS= and change PTHREAD_LIBS= -lthr to PTHREAD_LIBS= -pthread. Works with my 5.5. Steven ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
Hello, Am Mittwoch, den 12.11.2008, 17:19 +0300 schrieb Odhiambo Washington: > On Wed, Nov 12, 2008 at 3:53 PM, Juergen Dankoweit < > [EMAIL PROTECTED]> wrote: > > > Hello to the list, > > > > on my FreeBSD system I have strange problems with clamav: > > During detection a virus clamav blocks the whole mail traffic for ever. > > Only a restart of postfix, amavis and clamav solves this until the next > > virus. > > > > With clamav 0.93.3 there are no problems but it is too outdated. > > > > Because the ports tree is unupgradable I must use the original source > > from the web site. I compile clamav with the following options: > > ./configure --disable-clamuko --disable-ipv6 > > > [...] > ./configure --prefix=/usr/local --with-group=clamav \ > --disable-clamuko --with-user=mailnull \ > --disable-gethostbyname_r \ > --disable-zlib-vcheck \ > --disable-clamav \ > --enable-bigstack \ > --enable-readdir_r \ > --disable-dependency-tracking \ > --disable-bzip2 > I have tested your options for configure. I doesn't change anything. Thanks for your help. Best regards Jürgen ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
Hello, thanks for your answer. Am Mittwoch, den 12.11.2008, 17:19 +0300 schrieb Odhiambo Washington: > On Wed, Nov 12, 2008 at 3:53 PM, Juergen Dankoweit < > [EMAIL PROTECTED]> wrote: > > > Hello to the list, > > > > on my FreeBSD system I have strange problems with clamav: > > During detection a virus clamav blocks the whole mail traffic for ever. > > Only a restart of postfix, amavis and clamav solves this until the next > > virus. > > > > With clamav 0.93.3 there are no problems but it is too outdated. > > > > Because the ports tree is unupgradable I must use the original source > > from the web site. I compile clamav with the following options: > > ./configure --disable-clamuko --disable-ipv6 > > > > I encountered a problem with 0.94.1 on FreeBSD-5.5, but in my case, I > compiled it from the ports. Yes, the ports has it. > My problem is that clamd kept on restarting indefinately. This was not > happening with 0.93.3. So after pulling off so much of my hair , and posting > to the list and getting no responses, I decided to manually compile and see. > I used the following configure options: > > ./configure --prefix=/usr/local --with-group=clamav \ > --disable-clamuko --with-user=mailnull \ > --disable-gethostbyname_r \ > --disable-zlib-vcheck \ > --disable-clamav \ > --enable-bigstack \ > --enable-readdir_r \ > --disable-dependency-tracking \ > --disable-bzip2 > > Strangely, after I installed, it was able to run without the endless > restarting. I don't know what is in the ports that did this, but I think > it's not the ports. Rather it's something in 0.94.1. Not sure though, I will test your configure options. > > I use Exim, as opposed to Postfix, so if you decide to try my way, be very > careful with the "--with-user=mailnull". Thanks for the hint. > > Not sure if that will help, but I am so far happy. > > As regards upgrading from FreeBSD-5.5 as some may ask, I already have a > 7.1-PRERELEASE which will replace this server. I am gonna migrate all the > services. FreeBSD 5.5 is the last release which runs on my server. It does not look like that this will change the next time. No other operating system has trouble with my hardware, only FreeBSD 6.x and 7.x. Thanks again and I will test this. Best regards Jürgen ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On Wed, Nov 12, 2008 at 13:43, Juergen Dankoweit <[EMAIL PROTECTED]> wrote: > > Yes. The reason is, that FBSD 6 or 7 does not run anymore on my hardware > (SCSI problems). Did you report those so that they can be looked into? -- Please keep list traffic on the list. Rob MacGregor Whoever fights monsters should see to it that in the process he doesn't become a monster. Friedrich Nietzsche ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On Wed, Nov 12, 2008 at 3:53 PM, Juergen Dankoweit < [EMAIL PROTECTED]> wrote: > Hello to the list, > > on my FreeBSD system I have strange problems with clamav: > During detection a virus clamav blocks the whole mail traffic for ever. > Only a restart of postfix, amavis and clamav solves this until the next > virus. > > With clamav 0.93.3 there are no problems but it is too outdated. > > Because the ports tree is unupgradable I must use the original source > from the web site. I compile clamav with the following options: > ./configure --disable-clamuko --disable-ipv6 > I encountered a problem with 0.94.1 on FreeBSD-5.5, but in my case, I compiled it from the ports. Yes, the ports has it. My problem is that clamd kept on restarting indefinately. This was not happening with 0.93.3. So after pulling off so much of my hair , and posting to the list and getting no responses, I decided to manually compile and see. I used the following configure options: ./configure --prefix=/usr/local --with-group=clamav \ --disable-clamuko --with-user=mailnull \ --disable-gethostbyname_r \ --disable-zlib-vcheck \ --disable-clamav \ --enable-bigstack \ --enable-readdir_r \ --disable-dependency-tracking \ --disable-bzip2 Strangely, after I installed, it was able to run without the endless restarting. I don't know what is in the ports that did this, but I think it's not the ports. Rather it's something in 0.94.1. Not sure though, I use Exim, as opposed to Postfix, so if you decide to try my way, be very careful with the "--with-user=mailnull". Not sure if that will help, but I am so far happy. As regards upgrading from FreeBSD-5.5 as some may ask, I already have a 7.1-PRERELEASE which will replace this server. I am gonna migrate all the services. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "Life must be understood backwards; but... it must be lived forward." - Soren Kierkegaard "Oh My God! They killed init! You Bastards!" --from a /. post ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
Hello, Am Mittwoch, den 12.11.2008, 13:33 + schrieb Rob MacGregor: > On Wed, Nov 12, 2008 at 12:53, Juergen Dankoweit > <[EMAIL PROTECTED]> wrote: > > Hello to the list, > > > > on my FreeBSD system I have strange problems with clamav: > > During detection a virus clamav blocks the whole mail traffic for ever. > > Only a restart of postfix, amavis and clamav solves this until the next > > virus. > > > > With clamav 0.93.3 there are no problems but it is too outdated. > > > > Because the ports tree is unupgradable I must use the original source > > from the web site. I compile clamav with the following options: > > ./configure --disable-clamuko --disable-ipv6 > > Is there a good reason you can't upgrade to at least FreeBSD 6, or > even better FreeBSD 7? Yes. The reason is, that FBSD 6 or 7 does not run anymore on my hardware (SCSI problems). ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
Re: [Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
On Wed, Nov 12, 2008 at 12:53, Juergen Dankoweit <[EMAIL PROTECTED]> wrote: > Hello to the list, > > on my FreeBSD system I have strange problems with clamav: > During detection a virus clamav blocks the whole mail traffic for ever. > Only a restart of postfix, amavis and clamav solves this until the next > virus. > > With clamav 0.93.3 there are no problems but it is too outdated. > > Because the ports tree is unupgradable I must use the original source > from the web site. I compile clamav with the following options: > ./configure --disable-clamuko --disable-ipv6 Is there a good reason you can't upgrade to at least FreeBSD 6, or even better FreeBSD 7? -- Please keep list traffic on the list. Rob MacGregor Whoever fights monsters should see to it that in the process he doesn't become a monster. Friedrich Nietzsche ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
[Clamav-users] Clamav 0.94.1 not working under FreeBSD 5.5
Hello to the list, on my FreeBSD system I have strange problems with clamav: During detection a virus clamav blocks the whole mail traffic for ever. Only a restart of postfix, amavis and clamav solves this until the next virus. With clamav 0.93.3 there are no problems but it is too outdated. Because the ports tree is unupgradable I must use the original source from the web site. I compile clamav with the following options: ./configure --disable-clamuko --disable-ipv6 Please help. Thanks for your answers. Best regards J.D. Operating system: FreeBSD 5.5-STABLE #9 problematic clamav: 0.94.1 last successful version of clamav: 0.93.3 ___ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
