Re: Stus-List 1980 C 36 CB

2018-11-24 Thread Ken Heaton via CnC-List 
Wrong boat I realise but perhaps the design and method of attachment are
similar?

https://drive.google.com/file/d/0B7X4Y5iVFYAKR0lrdU9WUHREVGs/view

Ken H.

On Sat, 24 Nov 2018 at 15:07, mark allott via CnC-List <
cnc-list@cnc-list.com> wrote:

> Looking for blueprints or drawings for my centreboard. Need to remove.
>
> Sent from Mark's iPad
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List 1980 C 36 CB

2018-11-24 Thread mark allott via CnC-List 
Looking for blueprints or drawings for my centreboard. Need to remove. 

Sent from Mark's iPad 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Fridge insulation

2018-11-24 Thread Len Mitchell via CnC-List 
If you are using foam try, to get the closed cell variety. The open cell gets 
water logged from any condensation. 
Dennis try Canadian beer, you won't need as many! Labatt maximum ice 7.2%
Len

Sent from my mobile device. 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Refrigeration insulation upgrade?

2018-11-24 Thread John Irvin via CnC-List 
Cans are not as tall and chill faster.

Sent from my iPhone

On Nov 23, 2018, at 10:57 PM, Dennis C. via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

Caution!  Be very careful adding insulation to the bottom of your icebox lid.  
I added insulation to the bottom of Touche's icebox lid and had to switch 
beers!  Bottled Coronas and Landsharks were too tall to stand up on the grate 
and allow the lid to close.  :(

Solution?  I went to store carefully evaluated beer bottles by height.  The 
"official" Touche' beer is now Modelo Especiale.  The shorter bottles now allow 
the lid to close completely.  :)

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Fri, Nov 23, 2018 at 6:31 PM Jim Watts via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
The most important place to start is the underside of the icebox top, it's just 
raw plywood. The opening lid has some light foam inside the fiberglass. The 
outside of the icebox has a couple of inches of urethane foamed in place.
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurraydata=02%7C01%7C%7C511fc084f4054838dcca08d651c0f58f%7C84df9e7fe9f640afb435%7C1%7C0%7C636786286522474614sdata=KQsIzK3mppj27GM%2BgCS4TpaC0%2FpPWALvdQzycqcgJvA%3Dreserved=0

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray