Re: Stus-List Landfall 35 - Manual
Congratulations Peter from a fellow LF 35 trad layout owner. While I don’t have a “spare” owner’s manual, I do have the original one for the boat. It has a fair amount of generic info about do’s and Don’ts with the boat but not as much in the way of repair and maintenance of the various systems. Winch service, refrigeration, diesel are all covered in different manuals that are specific to the component rather than entire boat. Feel free to email me outside the group discussion if you need a page sent as a digital file (wiring diagram, sailplan etc.) Enjoy! Chuck Gilchrest S/V Half Magic 1983 35 Landfall Padanaram MA Sent from my iPhone > On Sep 5, 2019, at 6:10 PM, Peter Cowenhoven via CnC-List > wrote: > > I'm a new owner of an 84 Landfall 35 traditional cabin layout! > > Does anyone know if there is a decent manual for it? I didn't see one on the > C&C site. > > Thanks, > > Peter > > Sent from Yahoo Mail on Android > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Stus-List Water Tank Woes [again] - Welding Question
My water tank is leaking again. I want to attempt a weld to repair it. It is a Kracor polypropylene tank, but the labeling details have faded over time, and no longer legible. I don't know what kind of polypropylene was used to construct the tank. So, the question is, do I use hi-density OR lo-density polypropylene? Or, does it matter? Thanks! Pete W. Siren Song C&C 30-2 Deltaville, Va. ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Water Tank Woes [again] - Welding Question
I took mine to Virginia tank repair. Welded while I waited. In a few hours and $75.00 I was on my way. In Roanoke. 540.344.9708.Great service and knowledgeable about the tanksJim Schwartz 38 landfall SEA YA !Washington ncSent from my Verizon, Samsung Galaxy smartphone Original message From: kelly petew via CnC-List Date: 9/6/19 6:31 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: kelly petew Subject: Stus-List Water Tank Woes [again] - Welding Question My water tank is leaking again. I want to attempt a weld to repair it. It is a Kracor polypropylene tank, but the labeling details have faded over time, and no longer legible. I don’t know what kind of polypropylene was used to construct the tank. So, the question is, do I use hi-density OR lo-density polypropylene? Or, does it matter? Thanks! Pete W. Siren Song C&C 30-2 Deltaville, Va. ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray