Stus-List Re: Galley sink drain C 30 Mk1
Hi Neil, Our (1974 C 30-1) sink and starboard cockpit rain was run exactly as you describe yours. While our boat was out last winter we had thru-hulls and seacocks replaced. The company doing that work informed me the shared arrangement would not pass survey and is no longer permitted by ABYC. So, we separated sink and cockpit drains and now have an additional thru-hull. Ours was installed without an elbow but with a slight sideways S bend to create a bit of a p-trap with drain running to a new thru-hull at the aft port side of the cabinet below the sink. This is better for storage in the cabinet but worse for accessing the seacock. Overall I’m very happy with the install, feeling slightly safer knowing that some very unlikely freak accident will not cause cockpit to drain into cabin via galley sink. Happy to send a photo of new drain, seacock, thru-hull under galley counter next time I’m at the boat. Andrew 1974 30mk1 Gulf Islands, BC Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu
Stus-List help with hull numbers
Hi! I’m the proud owner of a C 30 mk1 with HIN CCY302810474. I’m trying to work out what hull number I have. From what I’ve googled the “0474” tells me she was built in April of 1974, the “CCY30” tells me she’s a C 30 mk1, and the “281” says she’s hull number 281 ??? April 1974 seems a little early in the production run to have made 280 boats. Can anyone help me decode the HIN? Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
Stus-List crank handle for roller furling boom on a 30 mk1
We recently purchased a 1974 C 30 mk1. Our boat has a roller furling boom, but didn’t come with the crank handle. Does anyone know where I can a get a crank handle for the roller furling boom on a 1974 C 30 mk1? have one I can borrow (we're near Victoria BC)? or know of another tool that'll work in place of the original crank handle? Our boom's stuck at about 30 degrees from where it should be and I'd love to turn it back. Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
