Re: Stus-List A halyard mess
Antal makes something called a halyard slider system that consists of a car with a hook on it that runs on a mast mounted track. You splice a loop in the end of the halyard. And pull the jib up with a light tail and then disconnect the tail. No messy halyard to coil at all. I'm installing it on my boat for the furling headsail. That halyard never gets touched once the sail is up anyway. http://www.antal.it/eng/622-422_en A friend and occasional crewmember is the antal guy in the US. I will put you in touch if you like. Andy nee C&C 40 Peregrine Andrew Burton 139 Tuckerman Ave Middletown, RI USA02842 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Oct 19, 2018, at 13:56, Jeremy Ralph via CnC-List > wrote: > > Hi all, > > All my halyards come down to a block at the bottom of the mast where there is > a winch and cleat for them on the deck. I want to find a way to get the > coiled ends off the deck and hanging on the mast somehow, especially when at > the dock. I really don't want to drill/rivet/tap the mast (never done that) > but could I guess. > > Interested to hear what others recommend. > > Thanks, > > Jeremy > 34-1 #41 > > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List A halyard mess
Andrew, I think it is a great idea, but I cannot see how that would work. Do you attach the end of the halyard to the car on the rail? Jeremy, I backtrack the jib halyard back to the mast and hang the bitter end (coiled) on the halyard, just below where it exists the mast (with a prusik knot). Then I use a few pieces of Velcro to keep it neat. This way the tail end of the halyard is under the main sail cover, when at the dock (no UV damage). Also, the line stays dry so there is no green algae/mold. Marek 1994 C270 Legato Ottawa, ON From: Andrew Burton via CnC-List Sent: Friday, October 19, 2018 14:28 To: cnc-list@cnc-list.com Cc: Andrew Burton Subject: Re: Stus-List A halyard mess Antal makes something called a halyard slider system that consists of a car with a hook on it that runs on a mast mounted track. You splice a loop in the end of the halyard. And pull the jib up with a light tail and then disconnect the tail. No messy halyard to coil at all. I'm installing it on my boat for the furling headsail. That halyard never gets touched once the sail is up anyway. http://www.antal.it/eng/622-422_en<https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.antal.it%2Feng%2F622-422_en&data=02%7C01%7C%7Cfd716ec630c847be013008d635f0a343%7C84df9e7fe9f640afb435%7C1%7C0%7C636755704971508908&sdata=brpzYQYQ3grkCF9EZAUGOnL7VYlFT1iManyLU4w5Uik%3D&reserved=0> A friend and occasional crewmember is the antal guy in the US. I will put you in touch if you like. Andy nee C&C 40 Peregrine Andrew Burton 139 Tuckerman Ave Middletown, RI USA02842 http://sites.google.com/site/andrewburtonyachtservices/<https://nam05.safelinks.protection.outlook.com/?url=http%3A%2F%2Fsites.google.com%2Fsite%2Fandrewburtonyachtservices%2F&data=02%7C01%7C%7Cfd716ec630c847be013008d635f0a343%7C84df9e7fe9f640afb435%7C1%7C0%7C636755704971508908&sdata=1RbhjJ8PLXPZDOZNsSvR5fQW58JmCtPw9667JDOxSx0%3D&reserved=0> +401 965-5260 On Oct 19, 2018, at 13:56, Jeremy Ralph via CnC-List wrote: Hi all, All my halyards come down to a block at the bottom of the mast where there is a winch and cleat for them on the deck. I want to find a way to get the coiled ends off the deck and hanging on the mast somehow, especially when at the dock. I really don't want to drill/rivet/tap the mast (never done that) but could I guess. Interested to hear what others recommend. Thanks, Jeremy 34-1 #41 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray<https://nam05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7C%7Cfd716ec630c847be013008d635f0a343%7C84df9e7fe9f640afb435%7C1%7C0%7C636755704971665111&sdata=5PVIfWJDKWay%2FWIevGLgs5kpNwMdZwR%2F2BQrTRa%2BrEc%3D&reserved=0> ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List A halyard mess
The car on the track, yes. So basically your halyard only has to be half length Gand stays out of the sun. The rest of the. Halyard is detached when you get the main pard hooked on. The car ratchets along the track so it stays in place with the right tension. It's a very nifty system. I'm looking forward to installing it on Masquerade. Anagdy. Andrew Burton 139 Tuckerman Ave Middletown, RI USA02842 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Oct 19, 2018, at 14:54, Marek Dziedzic via CnC-List > wrote: > > Andrew, > > I think it is a great idea, but I cannot see how that would work. Do you > attach the end of the halyard to the car on the rail? > > Jeremy, I backtrack the jib halyard back to the mast and hang the bitter end > (coiled) on the halyard, just below where it exists the mast (with a prusik > knot). Then I use a few pieces of Velcro to keep it neat. This way the tail > end of the halyard is under the main sail cover, when at the dock (no UV > damage). Also, the line stays dry so there is no green algae/mold. > > Marek > > 1994 C270 Legato > Ottawa, ON > > From: Andrew Burton via CnC-List > Sent: Friday, October 19, 2018 14:28 > To: cnc-list@cnc-list.com > Cc: Andrew Burton > Subject: Re: Stus-List A halyard mess > > Antal makes something called a halyard slider system that consists of a car > with a hook on it that runs on a mast mounted track. You splice a loop in the > end of the halyard. And pull the jib up with a light tail and then disconnect > the tail. No messy halyard to coil at all. I'm installing it on my boat for > the furling headsail. That halyard never gets touched once the sail is up > anyway. > http://www.antal.it/eng/622-422_en > A friend and occasional crewmember is the antal guy in the US. I will put you > in touch if you like. > Andy > nee C&C 40 Peregrine > > > Andrew Burton > 139 Tuckerman Ave > Middletown, RI > USA02842 > > http://sites.google.com/site/andrewburtonyachtservices/ > +401 965-5260 > > On Oct 19, 2018, at 13:56, Jeremy Ralph via CnC-List > wrote: > >> Hi all, >> >> All my halyards come down to a block at the bottom of the mast where there >> is a winch and cleat for them on the deck. I want to find a way to get the >> coiled ends off the deck and hanging on the mast somehow, especially when at >> the dock. I really don't want to drill/rivet/tap the mast (never done that) >> but could I guess. >> >> Interested to hear what others recommend. >> >> Thanks, >> >> Jeremy >> 34-1 #41 >> >> ___ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >> > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray