Re: Stus-List Indicator lights for breaker panel

[Joel Aronson via CnC-List]

Jim,

I have same 12 volt panel, but my 120 volt panel has larger amber lights.

The red lights on the 12 volt panel are all on a single circuit board.
Luckily only the top one failed so far, so I was able to remove the corner
of the board.  The 1/4 inch light fit, but now I need to find the little
clips that look like speed nuts to hold the light in place.

The 120 volt lights have the clips on them.

Joel

On Tue, Sep 15, 2015 at 6:12 PM, Jim Watts via CnC-List <
cnc-list@cnc-list.com> wrote:

> Maybe you have a different panel? Mine were all the same size.
>
> http://members.shaw.ca/ptarmiganshift/images/IMG_1796.jpg
>
>
>
> Jim Watts
> Paradigm Shift
> C 35 Mk III
> Victoria, BC
>
> On 14 September 2015 at 15:46, Steve Sharkey via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> That’s interesting.  They were the same on mine.
>>
>> *From:* Joel Aronson via CnC-List <cnc-list@cnc-list.com>
>> *Sent:* Monday, September 14, 2015 2:22 PM
>> *To:* cnc-list@cnc-list.com
>> *Cc:* Joel Aronson <joel.aron...@gmail.com>
>> *Subject:* Re: Stus-List Indicator lights for breaker panel
>>
>> 12 volt and 110 were different sizes.  quarter inch and three eights inch
>> respectively
>>
>> On Monday, September 14, 2015, Jim Watts via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>>> It's been a long time since the project (9 years), I can't remember the
>>> fine details...and the spares I bought are on the boat. I will attempt to
>>> remember to check next time I'm out.
>>>
>>> Jim Watts
>>> Paradigm Shift
>>> C 35 Mk III
>>> Victoria, BC
>>>
>>> On 14 September 2015 at 05:18, Steve Sharkey via CnC-List <
>>> javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> wrote:
>>>
>>>> It’s .312”
>>>>
>>>> *From:* Jonathan Boocock via CnC-List
>>>> *Sent:* Monday, September 14, 2015 8:06 AM
>>>> *To:* javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');
>>>> *Cc:* Jonathan Boocock
>>>> *Subject:* Re: Stus-List Indicator lights for breaker panel
>>>>
>>>> Which size Paneltronics LEDs fit the C panel?
>>>> Is it 1/4"?
>>>> I also have a least 1 blown indicator light and would like to replace
>>>> it/them.
>>>>
>>>> Jon
>>>> C 44
>>>> Mor' Childs Play
>>>> Kingston
>>>> --
>>>> ___
>>>>
>>>> Email address:
>>>> javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com');
>>>> To change your list preferences, including unsubscribing -- go to the
>>>> bottom of page at:
>>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>>>
>>>>
>>>> ___
>>>>
>>>> Email address:
>>>> javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com');
>>>> To change your list preferences, including unsubscribing -- go to the
>>>> bottom of page at:
>>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>>>
>>>>
>>>>
>>>
>>
>>
>> --
>> Joel
>> 301 541 8551
>>
>> --
>> ___
>>
>> Email address:
>> CnC-List@cnc-list.com
>> To change your list preferences, including unsubscribing -- go to the
>> bottom of page at:
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>
>>
>> ___
>>
>> Email address:
>> CnC-List@cnc-list.com
>> To change your list preferences, including unsubscribing -- go to the
>> bottom of page at:
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>
>>
>>
>
> ___
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>


-- 
Joel
301 541 8551
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Jim Watts via CnC-List]

Maybe you have a different panel? Mine were all the same size.

http://members.shaw.ca/ptarmiganshift/images/IMG_1796.jpg



Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC

On 14 September 2015 at 15:46, Steve Sharkey via CnC-List <
cnc-list@cnc-list.com> wrote:

> That’s interesting.  They were the same on mine.
>
> *From:* Joel Aronson via CnC-List <cnc-list@cnc-list.com>
> *Sent:* Monday, September 14, 2015 2:22 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* Joel Aronson <joel.aron...@gmail.com>
> *Subject:* Re: Stus-List Indicator lights for breaker panel
>
> 12 volt and 110 were different sizes.  quarter inch and three eights inch
> respectively
>
> On Monday, September 14, 2015, Jim Watts via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> It's been a long time since the project (9 years), I can't remember the
>> fine details...and the spares I bought are on the boat. I will attempt to
>> remember to check next time I'm out.
>>
>> Jim Watts
>> Paradigm Shift
>> C 35 Mk III
>> Victoria, BC
>>
>> On 14 September 2015 at 05:18, Steve Sharkey via CnC-List <
>> javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> wrote:
>>
>>> It’s .312”
>>>
>>> *From:* Jonathan Boocock via CnC-List
>>> *Sent:* Monday, September 14, 2015 8:06 AM
>>> *To:* javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');
>>> *Cc:* Jonathan Boocock
>>> *Subject:* Re: Stus-List Indicator lights for breaker panel
>>>
>>> Which size Paneltronics LEDs fit the C panel?
>>> Is it 1/4"?
>>> I also have a least 1 blown indicator light and would like to replace
>>> it/them.
>>>
>>> Jon
>>> C 44
>>> Mor' Childs Play
>>> Kingston
>>> --
>>> ___
>>>
>>> Email address:
>>> javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com');
>>> To change your list preferences, including unsubscribing -- go to the
>>> bottom of page at:
>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>>
>>>
>>> ___
>>>
>>> Email address:
>>> javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com');
>>> To change your list preferences, including unsubscribing -- go to the
>>> bottom of page at:
>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>>
>>>
>>>
>>
>
>
> --
> Joel
> 301 541 8551
>
> --
> ___
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
> ___
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Jim Watts via CnC-List]

Forgot this part...the 120V side are still the old lamps, the 12V side are
LED's.

Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC

On 15 September 2015 at 15:12, Jim Watts <paradigmat...@gmail.com> wrote:

> Maybe you have a different panel? Mine were all the same size.
>
> http://members.shaw.ca/ptarmiganshift/images/IMG_1796.jpg
>
>
>
> Jim Watts
> Paradigm Shift
> C 35 Mk III
> Victoria, BC
>
> On 14 September 2015 at 15:46, Steve Sharkey via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> That’s interesting.  They were the same on mine.
>>
>> *From:* Joel Aronson via CnC-List <cnc-list@cnc-list.com>
>> *Sent:* Monday, September 14, 2015 2:22 PM
>> *To:* cnc-list@cnc-list.com
>> *Cc:* Joel Aronson <joel.aron...@gmail.com>
>> *Subject:* Re: Stus-List Indicator lights for breaker panel
>>
>> 12 volt and 110 were different sizes.  quarter inch and three eights inch
>> respectively
>>
>> On Monday, September 14, 2015, Jim Watts via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>>> It's been a long time since the project (9 years), I can't remember the
>>> fine details...and the spares I bought are on the boat. I will attempt to
>>> remember to check next time I'm out.
>>>
>>> Jim Watts
>>> Paradigm Shift
>>> C 35 Mk III
>>> Victoria, BC
>>>
>>> On 14 September 2015 at 05:18, Steve Sharkey via CnC-List <
>>> javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> wrote:
>>>
>>>> It’s .312”
>>>>
>>>> *From:* Jonathan Boocock via CnC-List
>>>> *Sent:* Monday, September 14, 2015 8:06 AM
>>>> *To:* javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');
>>>> *Cc:* Jonathan Boocock
>>>> *Subject:* Re: Stus-List Indicator lights for breaker panel
>>>>
>>>> Which size Paneltronics LEDs fit the C panel?
>>>> Is it 1/4"?
>>>> I also have a least 1 blown indicator light and would like to replace
>>>> it/them.
>>>>
>>>> Jon
>>>> C 44
>>>> Mor' Childs Play
>>>> Kingston
>>>> --
>>>> ___
>>>>
>>>> Email address:
>>>> javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com');
>>>> To change your list preferences, including unsubscribing -- go to the
>>>> bottom of page at:
>>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>>>
>>>>
>>>> ___
>>>>
>>>> Email address:
>>>> javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com');
>>>> To change your list preferences, including unsubscribing -- go to the
>>>> bottom of page at:
>>>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>>>
>>>>
>>>>
>>>
>>
>>
>> --
>> Joel
>> 301 541 8551
>>
>> --
>> ___
>>
>> Email address:
>> CnC-List@cnc-list.com
>> To change your list preferences, including unsubscribing -- go to the
>> bottom of page at:
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>
>>
>> ___
>>
>> Email address:
>> CnC-List@cnc-list.com
>> To change your list preferences, including unsubscribing -- go to the
>> bottom of page at:
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>
>>
>>
>
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Steve Sharkey via CnC-List]

It’s .312”

From: Jonathan Boocock via CnC-List 
Sent: Monday, September 14, 2015 8:06 AM
To: cnc-list@cnc-list.com 
Cc: Jonathan Boocock 
Subject: Re: Stus-List Indicator lights for breaker panel

Which size Paneltronics LEDs fit the C panel? 
Is it 1/4"?
I also have a least 1 blown indicator light and would like to replace it/them.

Jon
C 44
Mor' Childs Play
Kingston



___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Jonathan Boocock via CnC-List]

Which size Paneltronics LEDs fit the C panel?
Is it 1/4"?
I also have a least 1 blown indicator light and would like to replace
it/them.

Jon
C 44
Mor' Childs Play
Kingston
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Jim Watts via CnC-List]

It's been a long time since the project (9 years), I can't remember the
fine details...and the spares I bought are on the boat. I will attempt to
remember to check next time I'm out.

Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC

On 14 September 2015 at 05:18, Steve Sharkey via CnC-List <
cnc-list@cnc-list.com> wrote:

> It’s .312”
>
> *From:* Jonathan Boocock via CnC-List <cnc-list@cnc-list.com>
> *Sent:* Monday, September 14, 2015 8:06 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Jonathan Boocock <jonbooc...@gmail.com>
> *Subject:* Re: Stus-List Indicator lights for breaker panel
>
> Which size Paneltronics LEDs fit the C panel?
> Is it 1/4"?
> I also have a least 1 blown indicator light and would like to replace
> it/them.
>
> Jon
> C 44
> Mor' Childs Play
> Kingston
>
> --
> ___
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
> ___
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Steve Sharkey via CnC-List]

That’s interesting.  They were the same on mine.

From: Joel Aronson via CnC-List 
Sent: Monday, September 14, 2015 2:22 PM
To: cnc-list@cnc-list.com 
Cc: Joel Aronson 
Subject: Re: Stus-List Indicator lights for breaker panel

12 volt and 110 were different sizes.  quarter inch and three eights inch 
respectively

On Monday, September 14, 2015, Jim Watts via CnC-List <cnc-list@cnc-list.com> 
wrote:

  It's been a long time since the project (9 years), I can't remember the fine 
details...and the spares I bought are on the boat. I will attempt to remember 
to check next time I'm out. 


  Jim Watts
  Paradigm Shift
  C 35 Mk III
  Victoria, BC


  On 14 September 2015 at 05:18, Steve Sharkey via CnC-List 
<javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> wrote:

It’s .312”

From: Jonathan Boocock via CnC-List 
Sent: Monday, September 14, 2015 8:06 AM
To: javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com'); 
Cc: Jonathan Boocock 
Subject: Re: Stus-List Indicator lights for breaker panel

Which size Paneltronics LEDs fit the C panel? 
Is it 1/4"?
I also have a least 1 blown indicator light and would like to replace 
it/them.

Jon
C 44
Mor' Childs Play
Kingston


___

Email address:
javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com');
To change your list preferences, including unsubscribing -- go to the 
bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com



___

Email address:
javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com');
To change your list preferences, including unsubscribing -- go to the 
bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com






-- 
Joel 
301 541 8551




___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Joel Aronson via CnC-List]

12 volt and 110 were different sizes.  quarter inch and three eights inch
respectively

On Monday, September 14, 2015, Jim Watts via CnC-List <cnc-list@cnc-list.com>
wrote:

> It's been a long time since the project (9 years), I can't remember the
> fine details...and the spares I bought are on the boat. I will attempt to
> remember to check next time I'm out.
>
> Jim Watts
> Paradigm Shift
> C 35 Mk III
> Victoria, BC
>
> On 14 September 2015 at 05:18, Steve Sharkey via CnC-List <
> cnc-list@cnc-list.com
> <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');>> wrote:
>
>> It’s .312”
>>
>> *From:* Jonathan Boocock via CnC-List
>> <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');>
>> *Sent:* Monday, September 14, 2015 8:06 AM
>> *To:* cnc-list@cnc-list.com
>> <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');>
>> *Cc:* Jonathan Boocock
>> <javascript:_e(%7B%7D,'cvml','jonbooc...@gmail.com');>
>> *Subject:* Re: Stus-List Indicator lights for breaker panel
>>
>> Which size Paneltronics LEDs fit the C panel?
>> Is it 1/4"?
>> I also have a least 1 blown indicator light and would like to replace
>> it/them.
>>
>> Jon
>> C 44
>> Mor' Childs Play
>> Kingston
>>
>> --
>> ___
>>
>> Email address:
>> CnC-List@cnc-list.com
>> <javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com');>
>> To change your list preferences, including unsubscribing -- go to the
>> bottom of page at:
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>
>>
>> ___
>>
>> Email address:
>> CnC-List@cnc-list.com
>> <javascript:_e(%7B%7D,'cvml','CnC-List@cnc-list.com');>
>> To change your list preferences, including unsubscribing -- go to the
>> bottom of page at:
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>
>>
>>
>

-- 
Joel
301 541 8551
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Steve Sharkey via CnC-List]

Joel,

I replaced all of my panel lights about 7 years ago with LEDs and had to order 
a larger quantity than I needed so still have extras.  I have about 20 of the 
120 volt and about 12 of the 12 volt.  You’re welcome to them if you’d like, 
just let me know.  

Steve Sharkey 

From: Joel Aronson via CnC-List 
Sent: Friday, September 11, 2015 5:24 PM
To: cnc-list@cnc-list.com 
Cc: Joel Aronson 
Subject: Re: Stus-List Indicator lights for breaker panel

My 120 volt lights are 5/16 diameter, my 12 v lights are 1/4 inch diameter but 
are soldered.  Luckily I only need 2 reds, so not too many crimps. 

thanks for the digikey link.  Prices are all over the place!

Joel

On Fri, Sep 11, 2015 at 4:02 PM, Graham Collins via CnC-List 
<cnc-list@cnc-list.com> wrote:

  
http://www.digikey.ca/product-search/en/optoelectronics/panel-indicators-pilot-lights/524928

  Put in the diameter you need and see what comes up.

  Once you identify a manufacturer you may be able to find the same part 
cheaper elsewhere.

Graham Collins
Secret Plans
C 35-III #11On 2015-09-11 11:12 AM, Joel Aronson via CnC-List wrote:

Where can I find indicator lights for my breaker panels?  The Blue Sea 
connectors are too small (11/64).  All of the 120 volt panel lights need to be 
replaced as do several 12 volt lights.


Joel 
301 541 8551

 

___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com




  ___

  Email address:
  CnC-List@cnc-list.com
  To change your list preferences, including unsubscribing -- go to the bottom 
of page at:
  http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com







-- 

Joel 
301 541 8551



___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Joel Aronson via CnC-List]

I'll be getting out the calipers!
Thanks

Joel

On Fri, Sep 11, 2015 at 11:43 AM, Jim Watts via CnC-List <
cnc-list@cnc-list.com> wrote:

> I bought LED's from Paneltronics. They fit nicely into the little rings
> and are held in place with a dab of silicone on the back.
> Strangely enough, Paneltronics were by far the cheapest source I found,
> including big suppliers like Mouser.
>
> Jim Watts
> Paradigm Shift
> C 35 Mk III
> Victoria, BC
>
> On 11 September 2015 at 07:58, Frederick G Street via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Joel — send me a photo and measurements and I’ll see what I can find.
>>
>> — Fred
>>
>> Fred Street -- Minneapolis
>> S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI
>>
>> On Sep 11, 2015, at 9:12 AM, Joel Aronson via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>> Where can I find indicator lights for my breaker panels?  The Blue Sea
>> connectors are too small (11/64).  All of the 120 volt panel lights need to
>> be replaced as do several 12 volt lights.
>>
>> Joel
>> 301 541 8551
>>
>>
>> ___
>>
>> Email address:
>> CnC-List@cnc-list.com
>> To change your list preferences, including unsubscribing -- go to the
>> bottom of page at:
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>
>>
>>
>
> ___
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>


-- 
Joel
301 541 8551
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[svpegasus38]

You might try Paneltronics, they are in Florida. 
Doug MountjoysvPegasusLF38 just west of Ballard, WA.




-- Original message--From: Joel Aronson via CnC-List Date: Fri, Sep 11, 
2015 07:13To: cnc-list@cnc-list.com;Cc: Joel Aronson;Subject:Stus-List 
Indicator lights for breaker panel
Where can I find indicator lights for my breaker panels?  The Blue Sea 
connectors are too small (11/64).  All of the 120 volt panel lights need to be 
replaced as do several 12 volt lights.

Joel 
301 541 8551

___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Graham Collins via CnC-List]

http://www.digikey.ca/product-search/en/optoelectronics/panel-indicators-pilot-lights/524928

Put in the diameter you need and see what comes up.

Once you identify a manufacturer you may be able to find the same part 
cheaper elsewhere.


Graham Collins
Secret Plans
C 35-III #11

On 2015-09-11 11:12 AM, Joel Aronson via CnC-List wrote:
Where can I find indicator lights for my breaker panels?  The Blue Sea 
connectors are too small (11/64).  All of the 120 volt panel lights 
need to be replaced as do several 12 volt lights.


Joel
301 541 8551


___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com



___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Joel Aronson via CnC-List]

My 120 volt lights are 5/16 diameter, my 12 v lights are 1/4 inch diameter
but are soldered.  Luckily I only need 2 reds, so not too many crimps.

thanks for the digikey link.  Prices are all over the place!

Joel

On Fri, Sep 11, 2015 at 4:02 PM, Graham Collins via CnC-List <
cnc-list@cnc-list.com> wrote:

>
> 
> http://www.digikey.ca/product-search/en/optoelectronics/panel-indicators-pilot-lights/524928
>
> Put in the diameter you need and see what comes up.
>
> Once you identify a manufacturer you may be able to find the same part
> cheaper elsewhere.
>
> Graham Collins
> Secret Plans
> C 35-III #11
>
> On 2015-09-11 11:12 AM, Joel Aronson via CnC-List wrote:
>
> Where can I find indicator lights for my breaker panels?  The Blue Sea
> connectors are too small (11/64).  All of the 120 volt panel lights need to
> be replaced as do several 12 volt lights.
>
> Joel
> 301 541 8551
>
>
> ___
>
> Email address:CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the bottom 
> of page at:http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
> ___
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>


-- 
Joel
301 541 8551
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Stus-List Indicator lights for breaker panel

[Joel Aronson via CnC-List]

Where can I find indicator lights for my breaker panels?  The Blue Sea
connectors are too small (11/64).  All of the 120 volt panel lights need to
be replaced as do several 12 volt lights.

Joel
301 541 8551
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Frederick G Street via CnC-List]

Joel — send me a photo and measurements and I’ll see what I can find.

— Fred

Fred Street -- Minneapolis
S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI

> On Sep 11, 2015, at 9:12 AM, Joel Aronson via CnC-List 
>  wrote:
> 
> Where can I find indicator lights for my breaker panels?  The Blue Sea 
> connectors are too small (11/64).  All of the 120 volt panel lights need to 
> be replaced as do several 12 volt lights.
> 
> Joel 
> 301 541 8551
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List Indicator lights for breaker panel

[Jim Watts via CnC-List]

I bought LED's from Paneltronics. They fit nicely into the little rings and
are held in place with a dab of silicone on the back.
Strangely enough, Paneltronics were by far the cheapest source I found,
including big suppliers like Mouser.

Jim Watts
Paradigm Shift
C 35 Mk III
Victoria, BC

On 11 September 2015 at 07:58, Frederick G Street via CnC-List <
cnc-list@cnc-list.com> wrote:

> Joel — send me a photo and measurements and I’ll see what I can find.
>
> — Fred
>
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI
>
> On Sep 11, 2015, at 9:12 AM, Joel Aronson via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Where can I find indicator lights for my breaker panels?  The Blue Sea
> connectors are too small (11/64).  All of the 120 volt panel lights need to
> be replaced as do several 12 volt lights.
>
> Joel
> 301 541 8551
>
>
> ___
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com