Re: Stus-List Nicro/Marinco day/night vent motor replacement
Here's the one I bought: https://www.amazon.com/Motor-2104-RPM-1-3V-Range/dp/B00E4WQENM Dennis C. On Thu, Aug 22, 2019 at 8:35 AM dwight veinot via CnC-List < cnc-list@cnc-list.com> wrote: > Thanks Dennis. I need to do something similar with my nicro solar vent. > Where did you buy the motor and do you know the rpm of the new motor. When > i replaced the old (6years) battery which I proved was shot because I > noticed the unit worked well on just the solar panel in the sun with no > battery installed but it has not worked at all since I tried to make things > better with a shot of fluid film at the shaft motor interface so likely > that killed the motor. > > On Wed, Aug 21, 2019 at 8:47 PM Dennis C. via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Well, I replaced the motor in Touche's Nicro Model 20703S day/night >> vent. Cost for two motors delivered was under $10. A new vent runs about >> $175. In addition, Marinco no longer makes the 20703 model. It has been >> replaced by the 20803 model. Last time the model changed, I had to modify >> the mount, drill more holes in the deck, etc. I didn't want to do that >> again. I managed to find a new 20703S but it will be nice to have the old >> one as a drop-in spare. >> >> Here is the link to the repair document: >> https://drive.google.com/open?id=1DIcB97w4BUImn8-mOGs7sJaYY_9eBCX9 >> >> Dennis C. >> Touche' 35-1 #83 >> Mandeville, LA >> ___ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> -- > Sent from Gmail Mobile > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Nicro/Marinco day/night vent motor replacement
Thanks Dennis. I need to do something similar with my nicro solar vent. Where did you buy the motor and do you know the rpm of the new motor. When i replaced the old (6years) battery which I proved was shot because I noticed the unit worked well on just the solar panel in the sun with no battery installed but it has not worked at all since I tried to make things better with a shot of fluid film at the shaft motor interface so likely that killed the motor. On Wed, Aug 21, 2019 at 8:47 PM Dennis C. via CnC-List < cnc-list@cnc-list.com> wrote: > Well, I replaced the motor in Touche's Nicro Model 20703S day/night vent. > Cost for two motors delivered was under $10. A new vent runs about $175. > In addition, Marinco no longer makes the 20703 model. It has been replaced > by the 20803 model. Last time the model changed, I had to modify the > mount, drill more holes in the deck, etc. I didn't want to do that again. > I managed to find a new 20703S but it will be nice to have the old one as a > drop-in spare. > > Here is the link to the repair document: > https://drive.google.com/open?id=1DIcB97w4BUImn8-mOGs7sJaYY_9eBCX9 > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Sent from Gmail Mobile ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Nicro/Marinco day/night vent motor replacement
Well done On Wed, Aug 21, 2019, 7:47 PM Dennis C. via CnC-List wrote: > Well, I replaced the motor in Touche's Nicro Model 20703S day/night vent. > Cost for two motors delivered was under $10. A new vent runs about $175. > In addition, Marinco no longer makes the 20703 model. It has been replaced > by the 20803 model. Last time the model changed, I had to modify the > mount, drill more holes in the deck, etc. I didn't want to do that again. > I managed to find a new 20703S but it will be nice to have the old one as a > drop-in spare. > > Here is the link to the repair document: > https://drive.google.com/open?id=1DIcB97w4BUImn8-mOGs7sJaYY_9eBCX9 > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Stus-List Nicro/Marinco day/night vent motor replacement
Well, I replaced the motor in Touche's Nicro Model 20703S day/night vent. Cost for two motors delivered was under $10. A new vent runs about $175. In addition, Marinco no longer makes the 20703 model. It has been replaced by the 20803 model. Last time the model changed, I had to modify the mount, drill more holes in the deck, etc. I didn't want to do that again. I managed to find a new 20703S but it will be nice to have the old one as a drop-in spare. Here is the link to the repair document: https://drive.google.com/open?id=1DIcB97w4BUImn8-mOGs7sJaYY_9eBCX9 Dennis C. Touche' 35-1 #83 Mandeville, LA ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
