Re: Stus-List Prop won't come off
We pulled the Martec on Persistence last month. Initially it would not budge. Then my go to guy Peter came by with a puller and a lot of experience. The first thing he said to do was to loosen the nut and back it off. I believe approx. ¼ inch. This will prevent prop from falling off. Then we put on the puller and tightened with absolutely no results. Left the puller in place and heated the prop hub with propane torch for a while. After abut ten minutes of heating we tapped the hub with a hammer and the prop popped loose.After that it was all about not burning our hands I hope the new Flex-o-Fold is as firmly in place as our Martec was on the shaft! Mike Persistence Halifax, NS From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of robert via CnC-List Sent: Tuesday, December 13, 2016 9:56 AM To: cnc-list@cnc-list.com Cc: robert Subject: Stus-List Prop won't come off A word of caution when pulling a prop...be careful when it comes free that it doesn't simply drop to a surface (asphalt, rocks,etc) that will damage/dent a blade on the prop. Did that with mine the last time it was taken off.when the prop puller finally did its job, the prop flew off and landed on asphalt putting a dent or nick (maybe 3/16th deep) in the edge of one of the blades. Had to send it to a shop to have the dent repaired.cost $40 plus shipping but it had to be done otherwise I might have had a slight vibration because of the dented blade. Robert Abbott AZURA C 32 - 84 Halifax, N.S. On 2016-12-12 11:23 AM, William Walker via CnC-List wrote: All joking aside...the prop puller will do it in time.. Put on. Tighten. Wait.. Tighten.. Wait.. I pulled mine this summer and thought it would never budge..then pow...it let loose with a bang..patience Bill Walker Cnc 36 Sent from AOL Mobile Mail On Monday, December 12, 2016 Joel Aronson via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: And I thought a Sawzall was radical! Joel On Mon, Dec 12, 2016 at 8:11 AM, Della Barba, Joe via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: If I could make a suggestion based on a limited knowledge of explosives and submarine props: I would reduce the amount used by quite a bit, perhaps in proportion to the size of the prop? Otherwise the results may end up as a rather unique insurance claim Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of Ron Ricci via CnC-List Sent: Monday, December 12, 2016 07:50 To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Ron Ricci <rvri...@gmail.com<mailto:rvri...@gmail.com>> Subject: Re: Stus-List Prop won't come off Explosives! A few feet of Primacord makes it easy. That what they used to get the screw off a submarine. Good luck! From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Sunday, December 11, 2016 11:57 AM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Joel Aronson Subject: Stus-List Prop won't come off Help! Tried PB blaster, torch and prop puller With some no so gentle tapping. It won't budge. Suggestions? Joel ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! -- Joel 301 541 8551 ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
Re: Stus-List Prop won't come off.
I've got a call into my mechanic. If I get there first I'll try it and report back. Joel On Mon, Dec 12, 2016 at 11:48 AM, RANDY via CnC-List <cnc-list@cnc-list.com> wrote: > Colin you beat me to that suggestion. I have to pull my prop this winter, > and plan to try this technique if I run into trouble: https://www.youtube. > com/watch?v=KFdFsfSAuyc > > Joel if you try it, please post your experience report. > > Cheers, > Randy Stafford > S/V Grenadine > C 30-1 #7 > Ken Caryl, CO > > -- > *From: *"colin binkley via CnC-List" <cnc-list@cnc-list.com> > *To: *"cnc-list" <cnc-list@cnc-list.com> > *Cc: *"colin binkley" <colinbink...@yahoo.com> > *Sent: *Monday, December 12, 2016 8:22:37 AM > *Subject: *Stus-List Prop won't come off. > > > I have had remarkable results with heating the assembly hot enough to > freely flow wax on the joint. Candle will work. I use beeswax. Good luck! > Colin > S/V Lindsey Layne > 71C #3 > > Sent from my iPhone > > ___ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > > ___ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > -- Joel 301 541 8551 ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
Re: Stus-List Prop won't come off.
Colin you beat me to that suggestion. I have to pull my prop this winter, and plan to try this technique if I run into trouble: https://www.youtube.com/watch?v=KFdFsfSAuyc Joel if you try it, please post your experience report. Cheers, Randy Stafford S/V Grenadine C 30-1 #7 Ken Caryl, CO - Original Message - From: "colin binkley via CnC-List" <cnc-list@cnc-list.com> To: "cnc-list" <cnc-list@cnc-list.com> Cc: "colin binkley" <colinbink...@yahoo.com> Sent: Monday, December 12, 2016 8:22:37 AM Subject: Stus-List Prop won't come off. I have had remarkable results with heating the assembly hot enough to freely flow wax on the joint. Candle will work. I use beeswax. Good luck! Colin S/V Lindsey Layne 71C #3 Sent from my iPhone ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
Stus-List Prop won't come off.
I have had remarkable results with heating the assembly hot enough to freely flow wax on the joint. Candle will work. I use beeswax. Good luck! Colin S/V Lindsey Layne 71C #3 Sent from my iPhone ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
Re: Stus-List Prop won't come off
All joking aside...the prop puller will do it in time.. Put on. Tighten. Wait.. Tighten.. Wait.. I pulled mine this summer and thought it would never budge..then pow...it let loose with a bang..patience Bill Walker Cnc 36 Sent from AOL Mobile Mail On Monday, December 12, 2016 Joel Aronson via CnC-List <cnc-list@cnc-list.com> wrote: And I thought a Sawzall was radical! Joel On Mon, Dec 12, 2016 at 8:11 AM, Della Barba, Joe via CnC-List <cnc-list@cnc-list.com> wrote: If I could make a suggestion based on a limited knowledge of explosives and submarine props: I would reduce the amount used by quite a bit, perhaps in proportion to the size of the prop? Otherwise the results may end up as a rather unique insurance claim Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ron Ricci via CnC-List Sent: Monday, December 12, 2016 07:50 To: cnc-list@cnc-list.com Cc: Ron Ricci <rvri...@gmail.com> Subject: Re: Stus-List Prop won't come off Explosives! A few feet of Primacord makes it easy. That what they used to get the screw off a submarine. Good luck! From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Sunday, December 11, 2016 11:57 AM To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: Stus-List Prop won't come off Help! Tried PB blaster, torch and prop puller With some no so gentle tapping. It won't budge. Suggestions? Joel ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! -- Joel 301 541 8551 ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
Re: Stus-List Prop won't come off
And I thought a Sawzall was radical! Joel On Mon, Dec 12, 2016 at 8:11 AM, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > If I could make a suggestion based on a limited knowledge of explosives > and submarine props: > > I would reduce the amount used by quite a bit, perhaps in proportion to > the size of the prop? Otherwise the results may end up as a rather unique > insurance claim > > Joe > > Coquina > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Ron > Ricci via CnC-List > *Sent:* Monday, December 12, 2016 07:50 > *To:* cnc-list@cnc-list.com > *Cc:* Ron Ricci <rvri...@gmail.com> > *Subject:* Re: Stus-List Prop won't come off > > > > Explosives! A few feet of Primacord makes it easy. That what they used > to get the screw off a submarine. Good luck! > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com > <cnc-list-boun...@cnc-list.com>] *On Behalf Of *Joel Aronson via CnC-List > *Sent:* Sunday, December 11, 2016 11:57 AM > *To:* cnc-list@cnc-list.com > *Cc:* Joel Aronson > *Subject:* Stus-List Prop won't come off > > > > Help! Tried PB blaster, torch and prop puller With some no so gentle > tapping. It won't budge. > > > > Suggestions? > > > > Joel > > ___ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > -- Joel 301 541 8551 ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
Re: Stus-List Prop won't come off
If I could make a suggestion based on a limited knowledge of explosives and submarine props: I would reduce the amount used by quite a bit, perhaps in proportion to the size of the prop? Otherwise the results may end up as a rather unique insurance claim Joe Coquina From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ron Ricci via CnC-List Sent: Monday, December 12, 2016 07:50 To: cnc-list@cnc-list.com Cc: Ron Ricci <rvri...@gmail.com> Subject: Re: Stus-List Prop won't come off Explosives! A few feet of Primacord makes it easy. That what they used to get the screw off a submarine. Good luck! From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Sunday, December 11, 2016 11:57 AM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Joel Aronson Subject: Stus-List Prop won't come off Help! Tried PB blaster, torch and prop puller With some no so gentle tapping. It won't budge. Suggestions? Joel ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
Re: Stus-List Prop won't come off
Explosives! A few feet of Primacord makes it easy. That what they used to get the screw off a submarine. Good luck! From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Sunday, December 11, 2016 11:57 AM To: cnc-list@cnc-list.com Cc: Joel Aronson Subject: Stus-List Prop won't come off Help! Tried PB blaster, torch and prop puller With some no so gentle tapping. It won't budge. Suggestions? Joel ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
Re: Stus-List Prop won't come off
Try renting a hydraulic puller? Gary S/V Kaylarah '90 C 37+ East Greenwich, RI, USA ~~~_/)~~ On Sun, Dec 11, 2016 at 1:40 PM, Steve Thomas via CnC-List < cnc-list@cnc-list.com> wrote: > > I couldn't get the prop to budge on my C 36 project boat, but I was > pulling the prop shaft anyway in order to change the stuffing box and > replace the cutlass bearing, so I took the shaft with the prop still > attached to a propeller shop and had them pull it and check the shaft for > straightness. I got the parts back separated with new jam nuts and a claim > that they had straightened a 10 thousandths wow in the shaft, for US $75. - > Canaveral Prop, Port Canaveral, FL. > > > Steve Thomas > C MKIII > Port Stanley, ON > > C 36 > Merritt Island, FL > > Joel Aronson via CnC-Listwrote: > Help! Tried PB blaster, torch and prop puller With some no so gentle > tapping. It won't budge. > > Suggestions? > > Joel > > > ___ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
Re: Stus-List Prop won't come off
I couldn't get the prop to budge on my C 36 project boat, but I was pulling the prop shaft anyway in order to change the stuffing box and replace the cutlass bearing, so I took the shaft with the prop still attached to a propeller shop and had them pull it and check the shaft for straightness. I got the parts back separated with new jam nuts and a claim that they had straightened a 10 thousandths wow in the shaft, for US $75. - Canaveral Prop, Port Canaveral, FL. Steve Thomas C MKIII Port Stanley, ON C 36 Merritt Island, FL Joel Aronson via CnC-Listwrote: Help! Tried PB blaster, torch and prop puller With some no so gentle tapping. It won't budge. Suggestions? Joel ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
Stus-List Prop won't come off
Help! Tried PB blaster, torch and prop puller With some no so gentle tapping. It won't budge. Suggestions? Joel ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!