Stus-List Re: Garboard

[Tom Sancton via CnC-List]

I’d like to see this too if you have pictures

Tom

Sent from my iPhone

> On Nov 22, 2021, at 11:46 PM, Richard Bush via CnC-List 
>  wrote:
> 
> 
> Ron, do you have any photos of your setup? Thanks
> 
> Richard
> 
> Richard N. Bush Law Offices 
> 2950 Breckenridge Lane, Suite Nine 
> Louisville, Kentucky 40220-1462 
> 502-584-7255
> 
> 
> -Original Message-
> From: RON CASCIATO via CnC-List 
> To: Stus-List 
> Cc: RON CASCIATO 
> Sent: Mon, Nov 22, 2021 10:22 pm
> Subject: Stus-List Re: Garboard
> 
> Agreed, we did this on Impromptu almost 7-8 years ago. 
> We drilled the hole a quarter inch below the floor of the bilge...FROM THE 
> OUTSIDE!!!
> I think the diameter of the threaded piece is 1", I took it to Home Depot and 
> found a male adapter that fitand pieced a 6" piece of PVC with a 45 
> degree angled end
> Bilge drains dry and no water running down the keel.
> The drain unscrews out and the plug sits just under the hull surface.we 
> swipe it with a dollop of Bondo and bottom paint.
> End of season, we just pick out the 1" circle of Bondo and screw the PVC 
> drain back in.
> An easy DYI project
> Ron Casciato 
> Impromptu
> C 38 MKII..'77
> 
> On Nov 22, 2021 4:50 PM, WILLIAM WALKER via CnC-List  
> wrote:
> Finally Did this 2 years ago..best thing ever did for the boat.  
> Look in archives, there is recent thread with good ideas 
> Bill Walker
> 
> On Monday, November 22, 2021, 09:26:16 AM EST, Tom Sancton via CnC-List 
>  wrote:
> 
> 
> 
> Looking at putting a garboard on my 35 mark 3. Has anyone done this? Looking 
> at leaving my mast up but concerned about water entering the boat through the 
> mast
> 
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --  https://www.paypal.me/stumurray Thanks - Stu
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Garboard

[John Christopher via CnC-List]

Yes - would like to see your setup.


/John
1983 LF38, Ontario

> On Nov 22, 2021, at 10:46 PM, Richard Bush via CnC-List 
>  wrote:
> 
> 
> Ron, do you have any photos of your setup? Thanks
> 
> Richard
> 
> Richard N. Bush Law Offices 
> 2950 Breckenridge Lane, Suite Nine 
> Louisville, Kentucky 40220-1462 
> 502-584-7255
> 
> 
> -Original Message-
> From: RON CASCIATO via CnC-List 
> To: Stus-List 
> Cc: RON CASCIATO 
> Sent: Mon, Nov 22, 2021 10:22 pm
> Subject: Stus-List Re: Garboard
> 
> Agreed, we did this on Impromptu almost 7-8 years ago. 
> We drilled the hole a quarter inch below the floor of the bilge...FROM THE 
> OUTSIDE!!!
> I think the diameter of the threaded piece is 1", I took it to Home Depot and 
> found a male adapter that fitand pieced a 6" piece of PVC with a 45 
> degree angled end
> Bilge drains dry and no water running down the keel.
> The drain unscrews out and the plug sits just under the hull surface.we 
> swipe it with a dollop of Bondo and bottom paint.
> End of season, we just pick out the 1" circle of Bondo and screw the PVC 
> drain back in.
> An easy DYI project
> Ron Casciato 
> Impromptu
> C 38 MKII..'77
> 
> On Nov 22, 2021 4:50 PM, WILLIAM WALKER via CnC-List  
> wrote:
> Finally Did this 2 years ago..best thing ever did for the boat.  
> Look in archives, there is recent thread with good ideas 
> Bill Walker
> 
> On Monday, November 22, 2021, 09:26:16 AM EST, Tom Sancton via CnC-List 
>  wrote:
> 
> 
> 
> Looking at putting a garboard on my 35 mark 3. Has anyone done this? Looking 
> at leaving my mast up but concerned about water entering the boat through the 
> mast
> 
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --  https://www.paypal.me/stumurray Thanks - Stu
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Garboard

[Richard Bush via CnC-List]

 Ron, do you have any photos of your setup? Thanks
 
Richard
 
Richard N. Bush Law Offices 
2950 Breckenridge Lane, Suite Nine 
Louisville, Kentucky 40220-1462 
502-584-7255 
 
-Original Message-
From: RON CASCIATO via CnC-List 
To: Stus-List 
Cc: RON CASCIATO 
Sent: Mon, Nov 22, 2021 10:22 pm
Subject: Stus-List Re: Garboard

Agreed, we did this on Impromptu almost 7-8 years ago. We drilled the hole a 
quarter inch below the floor of the bilge...FROM THE OUTSIDE!!!I think the 
diameter of the threaded piece is 1", I took it to Home Depot and found a male 
adapter that fitand pieced a 6" piece of PVC with a 45 degree angled 
endBilge drains dry and no water running down the keel.The drain unscrews 
out and the plug sits just under the hull surface.we swipe it with a dollop 
of Bondo and bottom paint.End of season, we just pick out the 1" circle of 
Bondo and screw the PVC drain back in.An easy DYI projectRon Casciato 
ImpromptuC 38 MKII..'77
On Nov 22, 2021 4:50 PM, WILLIAM WALKER via CnC-List  
wrote:

 Finally Did this 2 years ago..best thing ever did for the boat.  Look in 
archives, there is recent thread with good ideas Bill Walker
On Monday, November 22, 2021, 09:26:16 AM EST, Tom Sancton via CnC-List 
 wrote:  
 
 
Looking at putting a garboard on my 35 mark 3. Has anyone done this? Looking at 
leaving my mast up but concerned about water entering the boat through the mast 
 

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --  https://www.paypal.me/stumurray  Thanks - StuThanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Garboard

[RON CASCIATO via CnC-List]

Agreed, we did this on Impromptu almost 7-8 years ago. We drilled the hole a quarter inch below the floor of the bilge...FROM THE OUTSIDE!!!I think the diameter of the threaded piece is 1", I took it to Home Depot and found a male adapter that fitand pieced a 6" piece of PVC with a 45 degree angled endBilge drains dry and no water running down the keel.The drain unscrews out and the plug sits just under the hull surface.we swipe it with a dollop of Bondo and bottom paint.End of season, we just pick out the 1" circle of Bondo and screw the PVC drain back in.An easy DYI projectRon Casciato ImpromptuC 38 MKII..'77On Nov 22, 2021 4:50 PM, WILLIAM WALKER via CnC-List  wrote:
Finally Did this 2 years ago..best thing ever did for the boat.  Look in archives, there is recent thread with good ideas Bill Walker





On Monday, November 22, 2021, 09:26:16 AM EST, Tom Sancton via CnC-List  wrote:



Looking at putting a garboard on my 35 mark 3. Has anyone done this? Looking at leaving my mast up but concerned about water entering the boat through the mast

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Garboard

[Paul Hood via CnC-List]

Put one in a couple years ago.  Extremely happy with it and only disappointed 
that I didn’t do it earlier.  IMO, its really a necessity in our part of the 
world for winter storage when leaving the mast up.  Easy to put in/out plug 
each year.

 

Thanks,

Paul Hood

416-799-5549

 

From: dwight veinot via CnC-List  
Sent: November 22, 2021 5:39 PM
To: Stus-List 
Cc: dwight veinot 
Subject: Stus-List Re: Garboard

 

I drill the same half inch diameter hole from the low point in the bilge to 
outside on a downward angle and every spring I plug that hole with thickened 
epoxy. Works good

 

On Mon, Nov 22, 2021 at 10:26 AM Tom Sancton via CnC-List 
mailto:cnc-list@cnc-list.com> > wrote:


Looking at putting a garboard on my 35 mark 3. Has anyone done this? Looking at 
leaving my mast up but concerned about water entering the boat through the mast.

Sent from my iPhone
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

-- 

Sent from Gmail Mobile

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Garboard

[dwight veinot via CnC-List]

I drill the same half inch diameter hole from the low point in the bilge to
outside on a downward angle and every spring I plug that hole with
thickened epoxy. Works good

On Mon, Nov 22, 2021 at 10:26 AM Tom Sancton via CnC-List <
cnc-list@cnc-list.com> wrote:

>
> Looking at putting a garboard on my 35 mark 3. Has anyone done this?
> Looking at leaving my mast up but concerned about water entering the boat
> through the mast.
>
> Sent from my iPhone
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
>
-- 
Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Garboard

[Ken Heaton via CnC-List]

I think the best trick is to use two powerful magnets, one inside, and one
outside.  Move the inside magnet and the outside one will follow.  Move the
inside one to the lowest spot you can get to, where you want the garboard
drain to be, and the magnet outside will show you where to drill the hole.

Ken H.

On Mon, 22 Nov 2021 at 17:50, WILLIAM WALKER via CnC-List <
cnc-list@cnc-list.com> wrote:

> Finally Did this 2 years ago..best thing ever did for the boat.
> Look in archives, there is recent thread with good ideas
> Bill Walker
>
> On Monday, November 22, 2021, 09:26:16 AM EST, Tom Sancton via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>
>
> Looking at putting a garboard on my 35 mark 3. Has anyone done this?
> Looking at leaving my mast up but concerned about water entering the boat
> through the mast
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Garboard

[WILLIAM WALKER via CnC-List]

 Finally Did this 2 years ago..best thing ever did for the boat.  Look in 
archives, there is recent thread with good ideas Bill Walker
On Monday, November 22, 2021, 09:26:16 AM EST, Tom Sancton via CnC-List 
 wrote:  
 
 
Looking at putting a garboard on my 35 mark 3. Has anyone done this? Looking at 
leaving my mast up but concerned about water entering the boat through the mast 
 Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Garboard

[Danny Haughey via CnC-List]

OH...why didn't I think of this?

On 11/22/2021 9:55 AM, Joel Aronson via CnC-List wrote:
I had one installed on The Office. It probably wasn't necessary, in 
Annapolis,
If you install one, screw in a short pipe nipple so the water does 
not run down the keel.


On Mon, Nov 22, 2021 at 9:26 AM Tom Sancton via CnC-List 
 wrote:



Looking at putting a garboard on my 35 mark 3. Has anyone done
this? Looking at leaving my mast up but concerned about water
entering the boat through the mast.

Sent from my iPhone
Thanks to all of the subscribers that contributed to the list to
help with the costs involved.  If you want to show your support to
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray Thanks - Stu



--
Joel


Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --https://www.paypal.me/stumurray   Thanks - StuThanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Garboard

[Joel Aronson via CnC-List]

I had one installed on The Office. It probably wasn't necessary, in
Annapolis,
If you install one, screw in a short pipe nipple so the water does not run
down the keel.

On Mon, Nov 22, 2021 at 9:26 AM Tom Sancton via CnC-List <
cnc-list@cnc-list.com> wrote:

>
> Looking at putting a garboard on my 35 mark 3. Has anyone done this?
> Looking at leaving my mast up but concerned about water entering the boat
> through the mast.
>
> Sent from my iPhone
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
>


-- 
Joel
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Garboard

[Jeffrey A. Laman via CnC-List]

Do it! I and a friend both installed garboard drains spring 2020 on C and 
C As we both live several hours drive from boats in winter we had to 
impose on others to climb aboard in winter to check bilge and pump out 
periodically. Pain. Now, worry free and boat is very dry. Place a length of 
cotton clothes line in hole to wick out last drop. One of the better projects 
you can do on a boat.

Jeff Laman
1981 C "Harmony"
Ludington, Mi

Get Outlook for Android

From: Tom Sancton via CnC-List 
Sent: Monday, November 22, 2021 9:25:58 AM
To: cnc-list@cnc-list.com 
Cc: Tom Sancton 
Subject: Stus-List Garboard


Looking at putting a garboard on my 35 mark 3. Has anyone done this? Looking at 
leaving my mast up but concerned about water entering the boat through the mast.

Sent from my iPhone
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   
https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurraydata=04%7C01%7C%7C8dd28e9a33ac413a71ae08d9adc41344%7C84df9e7fe9f640afb435%7C1%7C0%7C637731879910809698%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000sdata=axCpW5S%2BVb2x2l6aQn6N6tMOyxAkNeWGmNolX%2F%2BlYa8%3Dreserved=0
  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu