Re: Stus-List remove head sink on c n c 32?
My 35/3 has a molded insert for the vanity, sink etc. Working on the pump is a PIA! I've had to replace the pump twice in the last 2 years. The Jabsco pumps with the quick release hose fittings make it a little less painful. My only advice is to get a good cushion to kneel on and a wide angle flashlight. Joel On Sun, Jul 27, 2014 at 12:23 PM, McElwreath, Daniel via CnC-List cnc-list@cnc-list.com wrote: Before going in the water this Spring I replaced all the waste hose and ran thru the vanity in head. This week I had to rebuild the par shower drain pump so I had to remove that. My question: Can the head sink be removed to allow access? Working thru the small vanity door is an absolute BEAR. I have been reluctant to try and put the pump back, only because it is such a pain. I was even thinking of cutting the vanity wall out, including the little door, and then reglassing when finished. But I know what that would look like. Thanks for any advice. Dan Mc on Tively II in City Island, NY ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com -- Joel 301 541 8551 ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List remove head sink on c n c 32?
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of McElwreath, Daniel via CnC-List Sent: Sunday, July 27, 2014 12:24 PM To: cnc-list@cnc-list.com Subject: Stus-List remove head sink on c n c 32? Before going in the water this Spring I replaced all the waste hose and ran thru the vanity in head. This week I had to rebuild the par shower drain pump so I had to remove that. My question: Can the head sink be removed to allow access? Working thru the small vanity door is an absolute BEAR. I have been reluctant to try and put the pump back, only because it is such a pain. I was even thinking of cutting the vanity wall out, including the little door, and then reglassing when finished. But I know what that would look like. Thanks for any advice. Dan Mc on Tively II in City Island, NY ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List remove head sink on c n c 32?
I would try removing the door to the vanity and the door to the head to allow alternate access angles and plenty of padding as has been suggested. I have approached this lying on my side. John Arpeggio From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Jacobs via CnC-List Sent: Tuesday, July 29, 2014 10:32 AM To: 'McElwreath, Daniel'; cnc-list@cnc-list.com Subject: Re: Stus-List remove head sink on c n c 32? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of McElwreath, Daniel via CnC-List Sent: Sunday, July 27, 2014 12:24 PM To: cnc-list@cnc-list.com Subject: Stus-List remove head sink on c n c 32? Before going in the water this Spring I replaced all the waste hose and ran thru the vanity in head. This week I had to rebuild the par shower drain pump so I had to remove that. My question: Can the head sink be removed to allow access? Working thru the small vanity door is an absolute BEAR. I have been reluctant to try and put the pump back, only because it is such a pain. I was even thinking of cutting the vanity wall out, including the little door, and then reglassing when finished. But I know what that would look like. Thanks for any advice. Dan Mc on Tively II in City Island, NY ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Stus-List remove head sink on c n c 32?
Before going in the water this Spring I replaced all the waste hose and ran thru the vanity in head. This week I had to rebuild the par shower drain pump so I had to remove that. My question: Can the head sink be removed to allow access? Working thru the small vanity door is an absolute BEAR. I have been reluctant to try and put the pump back, only because it is such a pain. I was even thinking of cutting the vanity wall out, including the little door, and then reglassing when finished. But I know what that would look like. Thanks for any advice. Dan Mc on Tively II in City Island, NY ___ This List is provided by the CC Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com