Stus-List repacking toe rails

[Jesse A. Rieber via CnC-List]

I am going to recaulk the toe rails and hull to deck joint on my 32' C  
After long consideration I will be doing this with butyl tape from Compass 
Marine.  I would be pleased to hear any advice I can get on this process, 
particularly placing the tape between the top lip of the hull and the white rub 
rail.  As I recall from my work on my 24' C, this rub rail material was pop  
rivited to the lip on the hull.

Jesse A. Rieber
Witch of the Westmoreland, 32' C
Cotuit, MA
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List repacking toe rails

[robert via CnC-List]

Jesse:

I have a 1984 C 32.my boat has butyl in the deck joint.boat is 
still quite dry and I have not torqued the bolt/nut in the 10 years I 
have owned it.


Have you done this and your boat is still leaking?

ROb Abbott
AZURA
C 32 - 84
Halifax, N.S.

On 2016-02-11 3:28 PM, Jesse A. Rieber via CnC-List wrote:
I am going to recaulk the toe rails and hull to deck joint on my 32' 
C  After long consideration I will be doing this with butyl tape 
from Compass Marine.  I would be pleased to hear any advice I can get 
on this process, particularly placing the tape between the top lip of 
the hull and the white rub rail.  As I recall from my work on my 24' 
C, this rub rail material was pop  rivited to the lip on the hull.


Jesse A. Rieber
Witch of the Westmoreland, 32' C
Cotuit, MA


___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com



___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List repacking toe rails

[Rick Bushie via CnC-List]

I tightened all toe rail bolts during Christmas vacation. None of the bolts 
spun as I tightened from below. This seems to have eliminated all water ingress 
from topsides. I would try that before I tore into the deck/hull joint.

Rick Bushie
Anchovy

Sent from my iPhone
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List repacking toe rails

[dwight veinot via CnC-List]

It doesn't hurt to apply Captain Tolleys right to the screw head, it
seems to seep in and form some sort of seal, I did it on Alianna, at
first it's white but that goes away
Dwight Veinot
C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
d.ve...@bellaliant.net



On Thu, Feb 11, 2016 at 6:47 PM, BillBinaList via CnC-List
 wrote:
> Any that do spin may subsequently leak. That is why the recommended method
> is to immobilize the screw from above as you tighten the nut below.
>
> Bill Bina
>
> On 2/11/2016 5:22 PM, Mike Amirault via CnC-List wrote:
>
> I’ve been working on my C keel/deck joint too Dwight, even though I
> can’t prove the K/D joint is leaking. I have been plugging away at it
> whenever the mood strikes me; I find that the vast majority of the fasteners
> do not spin when I tighten them from below.
> Regards,
>
> Mike Amirault
> C Lovely Cruise
> Saint MArgarets Bay, NS
> SMSC
>
>
>
> ___
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the bottom
> of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>

___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List repacking toe rails

[Mike Amirault via CnC-List]

I’ve been working on my C keel/deck joint too Dwight, even though I can’t 
prove the K/D joint is leaking. I have been plugging away at it whenever the 
mood strikes me; I find that the vast majority of the fasteners do not spin 
when I tighten them from below. 
Regards,

Mike Amirault
C Lovely Cruise
Saint MArgarets Bay, NS
SMSC___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List repacking toe rails

[BillBinaList via CnC-List]

Any that do spin may subsequently leak. That is why the recommended 
method is to immobilize the screw from above as you tighten the nut below.


Bill Bina

On 2/11/2016 5:22 PM, Mike Amirault via CnC-List wrote:
I’ve been working on my C keel/deck joint too Dwight, even 
though I can’t prove the K/D joint is leaking. I have been plugging 
away at it whenever the mood strikes me; I find that the vast majority 
of the fasteners do not spin when I tighten them from below.

Regards,
Mike Amirault
C Lovely Cruise
Saint MArgarets Bay, NS
SMSC



___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List repacking toe rails

[dwight veinot via CnC-List]

have you tried torquing the toe rail fastens...C puts lots of butyl
in there when mine was built and a selective area re torquing stoped
the leaksI'll do the rest when I get up the  spirit hits me or if
a leak developes, also used Captain Tolleys creeping crack cure from
the outside along the deck
Dwight Veinot
C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
d.ve...@bellaliant.net



On Thu, Feb 11, 2016 at 3:28 PM, Jesse A. Rieber via CnC-List
 wrote:
> I am going to recaulk the toe rails and hull to deck joint on my 32' C
> After long consideration I will be doing this with butyl tape from Compass
> Marine.  I would be pleased to hear any advice I can get on this process,
> particularly placing the tape between the top lip of the hull and the white
> rub rail.  As I recall from my work on my 24' C, this rub rail material
> was pop  rivited to the lip on the hull.
>
> Jesse A. Rieber
> Witch of the Westmoreland, 32' C
> Cotuit, MA
>
> ___
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the bottom
> of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>

___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Re: Stus-List repacking toe rails

[Dennis C. via CnC-List]

Just apply several applications of Captain Tolleys Creeping Crack Cure over 
several days and go sailing. 

Dennis C.

Sent from my iPhone

> On Feb 11, 2016, at 1:28 PM, "Jesse A. Rieber via CnC-List" 
>  wrote:
> 
> I am going to recaulk the toe rails and hull to deck joint on my 32' C  
> After long consideration I will be doing this with butyl tape from Compass 
> Marine.  I would be pleased to hear any advice I can get on this process, 
> particularly placing the tape between the top lip of the hull and the white 
> rub rail.  As I recall from my work on my 24' C, this rub rail material was 
> pop  rivited to the lip on the hull.
> 
> Jesse A. Rieber
> Witch of the Westmoreland, 32' C
> Cotuit, MA
> ___
> 
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the bottom 
> of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
> 
___

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com