Re: Stus-List webasto heater exhaust fitting
Pete, have you considered a heated vest or jacket or pants liner? I used them all the time and use very little power either plug-in or battery. As for the exhaust fitting. I f you can't find any I can make one or more if there is a demand. Yanni Boatless in Ontario Not for long. 92 Lebaron 3.0 convertible 95 LeBaron 3.0 turbo convertible 90 Dodge Spirit 3.0 soon to be turbo 07 Yamaha Straotoliner S TurboDodge 25298 SCRC 011059 SRO 26-6483 TURBO!cause bottles are for babies and superchargers blow!!! Which would you rather have, go fast goodies or shiny shoes? Your feet may look good but if your engine blows you ain't going nowhere From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Pete Shelquist via CnC-List Sent: January 4, 2015 1:20 PM To: cnc-list@cnc-list.com Subject: Stus-List webasto heater exhaust fitting After freezing my tail off last season on some overnight races, I finally broke down and am in the process of installing a heater on the boat. With the reverse angle on the transom, I understand there can be issues installing the straight through transom fitting that came with the kit. I found the following angled fitting available in the UK. Anyone know of a dealer/mnfctr in the US? http://www.ebay.co.uk/itm/24MM-S-S-EXHAUST-SKIN-FITTING-FOR-EBERSPACHER-WEBA STO-DIESEL-HEATER-/111490826093 Pete ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Stus-List webasto heater exhaust fitting
After freezing my tail off last season on some overnight races, I finally broke down and am in the process of installing a heater on the boat. With the reverse angle on the transom, I understand there can be issues installing the straight through transom fitting that came with the kit. I found the following angled fitting available in the UK. Anyone know of a dealer/mnfctr in the US? http://www.ebay.co.uk/itm/24MM-S-S-EXHAUST-SKIN-FITTING-FOR-EBERSPACHER-WEBA STO-DIESEL-HEATER-/111490826093 Pete ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List webasto heater exhaust fitting
Not off hand, but for what it is worth, I bought one a few years back from a guy in Turkey. I found a few dealers both in the UK and in the USA at the time, but the Turkish dealer was cheaper and there were no problems with shipping or quality. Steve Thomas CC27 MKIII Port Stanley, ON - Original Message - From: Pete Shelquist via CnC-List To: cnc-list@cnc-list.com Sent: Sunday, January 04, 2015 1:19 PM Subject: Stus-List webasto heater exhaust fitting After freezing my tail off last season on some overnight races, I finally broke down and am in the process of installing a heater on the boat. With the reverse angle on the transom, I understand there can be issues installing the straight through transom fitting that came with the kit. I found the following angled fitting available in the UK. Anyone know of a dealer/mnfctr in the US? http://www.ebay.co.uk/itm/24MM-S-S-EXHAUST-SKIN-FITTING-FOR-EBERSPACHER-WEBASTO-DIESEL-HEATER-/111490826093 Pete -- ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List webasto heater exhaust fitting
Give Sure Marine in Seattle (close to the Ballard Locks and Shilshole Bay) a call or contact through their web site. We used Sure Marine when installing Calypso's Webasto heating system back in 1999 and for parts and service since then. Great service and support for all things heating, cooking, and marine plumbing. Martin Calypso 1971 CC 43 Seattle From: CnC-List [cnc-list-boun...@cnc-list.com] on behalf of Pete Shelquist via CnC-List [cnc-list@cnc-list.com] Sent: Sunday, January 04, 2015 10:19 AM To: cnc-list@cnc-list.com Subject: Stus-List webasto heater exhaust fitting After freezing my tail off last season on some overnight races, I finally broke down and am in the process of installing a heater on the boat. With the reverse angle on the transom, I understand there can be issues installing the straight through transom fitting that came with the kit. I found the following angled fitting available in the UK. Anyone know of a dealer/mnfctr in the US? http://www.ebay.co.uk/itm/24MM-S-S-EXHAUST-SKIN-FITTING-FOR-EBERSPACHER-WEBASTO-DIESEL-HEATER-/111490826093 Pete ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List webasto heater exhaust fitting
Pete: My Wabasto exhausts thru the side just below the rail close to the transom. The pipe leading to it has a loop to prevent water from entering incase the rail should be submerged. Fred Hazzard S/V Fury CC 44 Portlandl, Or On Sun, Jan 4, 2015 at 10:19 AM, Pete Shelquist via CnC-List cnc-list@cnc-list.com wrote: After freezing my tail off last season on some overnight races, I finally broke down and am in the process of installing a heater on the boat. With the reverse angle on the transom, I understand there can be issues installing the straight through transom fitting that came with the kit. I found the following angled fitting available in the UK. Anyone know of a dealer/mnfctr in the US? http://www.ebay.co.uk/itm/24MM-S-S-EXHAUST-SKIN-FITTING-FOR-EBERSPACHER-WEBASTO-DIESEL-HEATER-/111490826093 Pete ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List webasto heater exhaust fitting
Check out the picture at this link and consider going out the bottom not the transom. https://docs.google.com/file/d/0B8pEh5lnvP1yTDJjOGJKa2NncFk/edit?usp=docslist_api Josh Muckley S/V Sea Hawk 1989 CC 37+ Solomons, MD On Jan 4, 2015 1:20 PM, Pete Shelquist via CnC-List cnc-list@cnc-list.com wrote: After freezing my tail off last season on some overnight races, I finally broke down and am in the process of installing a heater on the boat. With the reverse angle on the transom, I understand there can be issues installing the straight through transom fitting that came with the kit. I found the following angled fitting available in the UK. Anyone know of a dealer/mnfctr in the US? http://www.ebay.co.uk/itm/24MM-S-S-EXHAUST-SKIN-FITTING-FOR-EBERSPACHER-WEBASTO-DIESEL-HEATER-/111490826093 Pete ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List webasto heater exhaust fitting
Here's a video with a better shot of my discharge thru-hulls and transom. They all have internal high point loops and discharge above the normal water line. You can see the water line on the rudder and bottom paint. https://docs.google.com/file/d/0B8pEh5lnvP1ydVl2MnpxVXpHalk/edit?usp=docslist_api Josh On Jan 4, 2015 1:20 PM, Pete Shelquist via CnC-List cnc-list@cnc-list.com wrote: After freezing my tail off last season on some overnight races, I finally broke down and am in the process of installing a heater on the boat. With the reverse angle on the transom, I understand there can be issues installing the straight through transom fitting that came with the kit. I found the following angled fitting available in the UK. Anyone know of a dealer/mnfctr in the US? http://www.ebay.co.uk/itm/24MM-S-S-EXHAUST-SKIN-FITTING-FOR-EBERSPACHER-WEBASTO-DIESEL-HEATER-/111490826093 Pete ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ This List is provided by the CC Photo Album. Please donate to the CC Photo Album to keep this list free for all subscribers. Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
