Re: [CODE4LIB] Tool Library 2.0
Late to the party, but one of our Maker Lab staffers suggested this site: http://fab.cba.mit.edu/about/faq/ Rachel Shaevel Electronic Resources Cataloger Technical Services/Catalog Department Chicago Public Library Harold Washington Library Center 400 S. State St. Chicago, IL 60605 P: (312) 747-4660 rshae...@chipublib.org -Original Message- From: Code for Libraries [mailto:CODE4LIB@LISTSERV.ND.EDU] On Behalf Of Daron Dierkes Sent: Thursday, February 27, 2014 3:51 PM To: CODE4LIB@LISTSERV.ND.EDU Subject: Re: [CODE4LIB] Tool Library 2.0 In St. Louis, to my knowledge we do not have a makerspace as part of a library. We do however have a hackerspace called Arch Reactor and a new TechShop is coming soon, which I guess is maybe something similar but diffferent? Could any of you help clarify the terms for me and maybe explain what libraries have to do with them? On Thu, Feb 27, 2014 at 3:16 PM, Cary Gordon listu...@chillco.com wrote: Personally, I would put soldering irons in phase 2, as they really do require training to use. Without a pretty decent skillset, you can burn through a lot of led strips, etc. My lab consists of a Sparkfun kit hot-glued to the top of a parts box. This arrangement has been very helpful for my chronic mislayer self. It's a makerspace in a box. Cary http://www.flickr.com/photos/36809832@N00/12821466713/ Cary On Feb 27, 2014, at 12:33 PM, Edward Iglesias edwardigles...@gmail.com wrote: Hello All, A colleague and I were recently asked to help create a tool library for makerspaces for a local state library consortia. The idea being they would lend out kits such as Arduino's with breadboards to libraries that are thinking of setting up some kind of makerspace but unsure where to start. So any of you have any must haves for such a collection. I'm thinink soldering irons arduinos Raspberry Pis Flora breadboards lots of connectors leds etc... Thanks, Edward Iglesias
Re: [CODE4LIB] Tool Library 2.0
Here's the handout content (I don't know how well attachments work with the list) I came up with for our local tech librarian group. Makerspace portable program kit Based on what I’ve found and feedback I’ve gotten I think the basic kit would cost about $1500. The backbone of the kit should include a large, portable, rugged case sufficient for the basic tools and consumables. I left out consumables in the prediction because I wasn’t sure how many consumables to put in because some libraries likely already have first aid kits, fire extinguishers etc… and may even have safety glasses, gloves etc.. from youth programs. Further considerations for tools and consumables can be found here http://makerspace.com/resources and here (starting on page 9) http://makerspace.com/wp-content/uploads/2012/04/hsmakerspacetoolsmaterials-201204.pdf Tecra Tools offers a well-rounded electro-mechanical tool kit in a sturdy, roller case. $1257 http://www.tecratools.com/pages/service/83000.html Breadboard $14 http://www.amazon.com/microtivity-IB751-750-point-Experiment-Breadboard/dp/B008A9UORM/ref=sr_1_1?ie=UTF8qid=1386878510sr=8-141keywords=breadboard Helping Hands $17 http://www.amazon.com/SE-Power-Illuminated-Helping-Magnifier/dp/B002NVT92O/ref=pd_sim_sbs_e_4 Glue gun $15 http://www.amazon.com/Surebonder-DT-280F-Dual-Temperature-Full/dp/B000J2D8QC/ref=sr_1_9?ie=UTF8qid=1386876055sr=8-9keywords=glue+gun Sewing Machine $80-$200 http://www.amazon.com/2259-Tradition-Free-Arm-19-Stitch-Machine/dp/B0051HJ6JS/ref=sr_1_3/182-2949519-8111568?ie=UTF8qid=1386875505sr=8-3keywords=singer+sewing+machine Use examples http://www.engadget.com/2013/07/30/ben-heck-bicycle-turn-signal/ http://makerspace.com/maker-news/educators-workshop-review-sewing Lilipad(s) Perhaps one for the kit with the idea that libraries doing a program focusing would gather funds for more. $21.95 http://www.arduino.cc/en/Main/ArduinoBoardLilyPad Some type of Raspberri Pi set up like Raspberri Pi Ultimate Starter Kit $89 http://www.amazon.com/dp/B00G1PNG54/ref=as_li_ss_til?tag=thebacgla-20camp=0creative=0linkCode=as4creativeASIN=B00G1PNG54adid=1TP8EAQY386ZRDD42BZZ Or Kano Kit $99 http://www.kickstarter.com/projects/alexklein/kano-a-computer-anyone-can-make/ http://www.wired.com/design/2013/12/for-99-you-can-make-your-own-computer/ Cool but not necessary Sugru $18 http://www.amazon.com/dp/B00G1PNG54/ref=as_li_ss_til?tag=thebacgla-20camp=0creative=0linkCode=as4creativeASIN=B00G1PNG54adid=1TP8EAQY386ZRDD42BZZ Getting started with soldering kit $64.99 http://www.makershed.com/Make_Getting_Started_with_Soldering_Kit_p/msgsws.htm?Click=127972 For younger Makers littleBits Base Kit $75 http://www.amazon.com/gp/product/B00ECWSL0I/ref=as_li_ss_tl?ie=UTF8camp=1789creative=390957creativeASIN=B00ECWSL0IlinkCode=as2tag=jasobjoneshomepa MakeyMake $50 http://www.amazon.com/gp/product/B008SFLEPE/ref=as_li_ss_tl?ie=UTF8camp=1789creative=390957creativeASIN=B008SFLEPElinkCode=as2tag=jasobjoneshomepa Related links Make Magazine http://makezine.com/ Make it at your library http://www.makeitatyourlibrary.org/ Maker Bus (Thanks Marilyn and Joe) http://dhmakerbus.com/about/ Kevin French, MSLIS Systems Librarian GMILCS, Inc. 31 Mount Saint Mary's Way Hooksett, NH 03106-4400 (603)485-4286 -Original Message- From: Code for Libraries [mailto:CODE4LIB@LISTSERV.ND.EDU] On Behalf Of Edward Iglesias Sent: Thursday, February 27, 2014 15:33 To: CODE4LIB@LISTSERV.ND.EDU Subject: [CODE4LIB] Tool Library 2.0 Hello All, A colleague and I were recently asked to help create a tool library for makerspaces for a local state library consortia. The idea being they would lend out kits such as Arduino's with breadboards to libraries that are thinking of setting up some kind of makerspace but unsure where to start. So any of you have any must haves for such a collection. I'm thinink soldering irons arduinos Raspberry Pis Flora breadboards lots of connectors leds etc... Thanks, Edward Iglesias
Re: [CODE4LIB] Tool Library 2.0
Thanks to all of you for the replies. Great suggestions on the k-12 set Ian as the primary users are public libraries. Cary, your setup is brilliant! Expect theft of your intellectual property ;) This is definitely early days with a focus on just checking out kits with a minimum of training required. The idea is to lend tools or kits to libraries who want to try something out but not make a major commitment yet. Edward Iglesias On Thu, Feb 27, 2014 at 4:51 PM, Daron Dierkes daron.dier...@gmail.comwrote: In St. Louis, to my knowledge we do not have a makerspace as part of a library. We do however have a hackerspace called Arch Reactor and a new TechShop is coming soon, which I guess is maybe something similar but diffferent? Could any of you help clarify the terms for me and maybe explain what libraries have to do with them? On Thu, Feb 27, 2014 at 3:16 PM, Cary Gordon listu...@chillco.com wrote: Personally, I would put soldering irons in phase 2, as they really do require training to use. Without a pretty decent skillset, you can burn through a lot of led strips, etc. My lab consists of a Sparkfun kit hot-glued to the top of a parts box. This arrangement has been very helpful for my chronic mislayer self. It's a makerspace in a box. Cary http://www.flickr.com/photos/36809832@N00/12821466713/ Cary On Feb 27, 2014, at 12:33 PM, Edward Iglesias edwardigles...@gmail.com wrote: Hello All, A colleague and I were recently asked to help create a tool library for makerspaces for a local state library consortia. The idea being they would lend out kits such as Arduino's with breadboards to libraries that are thinking of setting up some kind of makerspace but unsure where to start. So any of you have any must haves for such a collection. I'm thinink soldering irons arduinos Raspberry Pis Flora breadboards lots of connectors leds etc... Thanks, Edward Iglesias
Re: [CODE4LIB] Tool Library 2.0
There was a Techsoup webinar earlier this week on small libraries and makerspaces. You can watch the recording here if you're interested. https://cc.readytalk.com/cc/s/meetingArchive?eventId=9h6uo2mgc0uz Kevin French, MSLIS Systems Librarian GMILCS, Inc. 31 Mount Saint Mary's Way Hooksett, NH 03106-4400 (603)485-4286 -Original Message- From: Code for Libraries [mailto:CODE4LIB@LISTSERV.ND.EDU] On Behalf Of Daron Dierkes Sent: Thursday, February 27, 2014 16:51 To: CODE4LIB@LISTSERV.ND.EDU Subject: Re: [CODE4LIB] Tool Library 2.0 In St. Louis, to my knowledge we do not have a makerspace as part of a library. We do however have a hackerspace called Arch Reactor and a new TechShop is coming soon, which I guess is maybe something similar but diffferent? Could any of you help clarify the terms for me and maybe explain what libraries have to do with them? On Thu, Feb 27, 2014 at 3:16 PM, Cary Gordon listu...@chillco.com wrote: Personally, I would put soldering irons in phase 2, as they really do require training to use. Without a pretty decent skillset, you can burn through a lot of led strips, etc. My lab consists of a Sparkfun kit hot-glued to the top of a parts box. This arrangement has been very helpful for my chronic mislayer self. It's a makerspace in a box. Cary http://www.flickr.com/photos/36809832@N00/12821466713/ Cary On Feb 27, 2014, at 12:33 PM, Edward Iglesias edwardigles...@gmail.com wrote: Hello All, A colleague and I were recently asked to help create a tool library for makerspaces for a local state library consortia. The idea being they would lend out kits such as Arduino's with breadboards to libraries that are thinking of setting up some kind of makerspace but unsure where to start. So any of you have any must haves for such a collection. I'm thinink soldering irons arduinos Raspberry Pis Flora breadboards lots of connectors leds etc... Thanks, Edward Iglesias
Re: [CODE4LIB] Tool Library 2.0
A great idea! Some other hardware to consider: Raspberry Pi alternative: Beagle Bone Black Further Arduino support: Gemma (smaller version of FLORA) Various breakout boards (GPS, GSM, LCD, etc.) Sensors Servos For helping teach/interest younger folks: Snap Circuits littleBits For larger setups: 3D Printer CNC machine Welding Lamenator? I think the real key is being able to offer support for all of the tools offered, both in terms of justification (why is this a useful thing for a makerspace) and actual use. If no one at the tool library is familiar with a particular offering, then it probably shouldn't be offered until you've got a chance to learn up on it. Is there an intent to differentiate between tools and supplies? Would supplies be sent out, understanding that they're unlikely to be returned, or would the borrowing institution need to stock up on their own, following a set of recommendations from the lending library? Or perhaps any set of supplies would be bundled up as a kit along with the tool, and the borrowing institution would be charged for any lost bits upon return... -Ian -Original Message- From: Code for Libraries [mailto:CODE4LIB@LISTSERV.ND.EDU] On Behalf Of Edward Iglesias Sent: Thursday, February 27, 2014 3:33 PM To: CODE4LIB@LISTSERV.ND.EDU Subject: [CODE4LIB] Tool Library 2.0 Hello All, A colleague and I were recently asked to help create a tool library for makerspaces for a local state library consortia. The idea being they would lend out kits such as Arduino's with breadboards to libraries that are thinking of setting up some kind of makerspace but unsure where to start. So any of you have any must haves for such a collection. I'm thinink soldering irons arduinos Raspberry Pis Flora breadboards lots of connectors leds etc... Thanks, Edward Iglesias
Re: [CODE4LIB] Tool Library 2.0
This is something I was reminded of today at my local show and tell and I thought we had everything we'd need..: Don't forget the peripherals: Spare/older display monitors with a DVI port) USB keyboards, mice USB hubs Cables and dongles Network cables Power supplies (these items can quickly stifle the group and increase your start-up costs if you don't have extras at the ready. Might be good opportunity for donations/swaps) a starter web resource guide (videos, online retailers, tutorials, local communities) would be good. People usually want to know where they can get more info for self-learning and additional exploration. Beatrice R. Pulliam Library Commons Librarian for Technology and Access Phillips Memorial Library Providence College 1 Cunningham Square Providence, RI 02918 (t) 401.865.1622 (f) 401.865.2823 IM: rhodylibrarian (AIM/iChat/Yahoo/GoogleTalk) Twitter: beatricepulliam http://www.providence.edu/library From: Code for Libraries [CODE4LIB@LISTSERV.ND.EDU] on behalf of Ian Walls [iwa...@library.umass.edu] Sent: Thursday, February 27, 2014 4:03 PM To: CODE4LIB@LISTSERV.ND.EDU Subject: Re: [CODE4LIB] Tool Library 2.0 A great idea! Some other hardware to consider: Raspberry Pi alternative: Beagle Bone Black Further Arduino support: Gemma (smaller version of FLORA) Various breakout boards (GPS, GSM, LCD, etc.) Sensors Servos For helping teach/interest younger folks: Snap Circuits littleBits For larger setups: 3D Printer CNC machine Welding Lamenator? I think the real key is being able to offer support for all of the tools offered, both in terms of justification (why is this a useful thing for a makerspace) and actual use. If no one at the tool library is familiar with a particular offering, then it probably shouldn't be offered until you've got a chance to learn up on it. Is there an intent to differentiate between tools and supplies? Would supplies be sent out, understanding that they're unlikely to be returned, or would the borrowing institution need to stock up on their own, following a set of recommendations from the lending library? Or perhaps any set of supplies would be bundled up as a kit along with the tool, and the borrowing institution would be charged for any lost bits upon return... -Ian -Original Message- From: Code for Libraries [mailto:CODE4LIB@LISTSERV.ND.EDU] On Behalf Of Edward Iglesias Sent: Thursday, February 27, 2014 3:33 PM To: CODE4LIB@LISTSERV.ND.EDU Subject: [CODE4LIB] Tool Library 2.0 Hello All, A colleague and I were recently asked to help create a tool library for makerspaces for a local state library consortia. The idea being they would lend out kits such as Arduino's with breadboards to libraries that are thinking of setting up some kind of makerspace but unsure where to start. So any of you have any must haves for such a collection. I'm thinink soldering irons arduinos Raspberry Pis Flora breadboards lots of connectors leds etc... Thanks, Edward Iglesias
Re: [CODE4LIB] Tool Library 2.0
Personally, I would put soldering irons in phase 2, as they really do require training to use. Without a pretty decent skillset, you can burn through a lot of led strips, etc. My lab consists of a Sparkfun kit hot-glued to the top of a parts box. This arrangement has been very helpful for my chronic mislayer self. It's a makerspace in a box. Cary http://www.flickr.com/photos/36809832@N00/12821466713/ Cary On Feb 27, 2014, at 12:33 PM, Edward Iglesias edwardigles...@gmail.com wrote: Hello All, A colleague and I were recently asked to help create a tool library for makerspaces for a local state library consortia. The idea being they would lend out kits such as Arduino's with breadboards to libraries that are thinking of setting up some kind of makerspace but unsure where to start. So any of you have any must haves for such a collection. I'm thinink soldering irons arduinos Raspberry Pis Flora breadboards lots of connectors leds etc... Thanks, Edward Iglesias
Re: [CODE4LIB] Tool Library 2.0
In St. Louis, to my knowledge we do not have a makerspace as part of a library. We do however have a hackerspace called Arch Reactor and a new TechShop is coming soon, which I guess is maybe something similar but diffferent? Could any of you help clarify the terms for me and maybe explain what libraries have to do with them? On Thu, Feb 27, 2014 at 3:16 PM, Cary Gordon listu...@chillco.com wrote: Personally, I would put soldering irons in phase 2, as they really do require training to use. Without a pretty decent skillset, you can burn through a lot of led strips, etc. My lab consists of a Sparkfun kit hot-glued to the top of a parts box. This arrangement has been very helpful for my chronic mislayer self. It's a makerspace in a box. Cary http://www.flickr.com/photos/36809832@N00/12821466713/ Cary On Feb 27, 2014, at 12:33 PM, Edward Iglesias edwardigles...@gmail.com wrote: Hello All, A colleague and I were recently asked to help create a tool library for makerspaces for a local state library consortia. The idea being they would lend out kits such as Arduino's with breadboards to libraries that are thinking of setting up some kind of makerspace but unsure where to start. So any of you have any must haves for such a collection. I'm thinink soldering irons arduinos Raspberry Pis Flora breadboards lots of connectors leds etc... Thanks, Edward Iglesias
