Re: ReMoKo and openSuSE 11
sorry for the third post, here's some hcidumps from both pc and freerunner while havin remoko on # hcidump (from pc) HCI sniffer - Bluetooth packet analyzer ver 1.41 device: hci0 snap_len: 1028 filter: 0x < HCI Command: Create Connection (0x01|0x0005) plen 13 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < ACL data: handle 11 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event: Read Remote Supported Features (0x0b) plen 11 > HCI Event: Command Complete (0x0e) plen 6 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > HCI Event: Max Slots Change (0x1b) plen 3 > ACL data: handle 11 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Remote Name Req Complete (0x07) plen 255 > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x < ACL data: handle 11 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0040 > ACL data: handle 11 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x scid 0x0040 result 2 status 0 Connection refused - PSM not supported > HCI Event: Number of Completed Packets (0x13) plen 5 < HCI Command: Disconnect (0x01|0x0006) plen 3 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Disconn Complete (0x05) plen 4 hcidump (from freerunner) HCI sniffer - Bluetooth packet analyzer ver 1.38 device: hci0 snap_len: 1028 filter: 0x > HCI Event: Connect Request (0x04) plen 10 < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connect Complete (0x03) plen 11 < ACL data: handle 42 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 > HCI Event: Max Slots Change (0x1b) plen 3 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Command Status (0x0f) plen 4 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4 > HCI Event: Command Complete (0x0e) plen 6 < HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4 > HCI Event: Command Status (0x0f) plen 4 > HCI Event: Connection Packet Type Changed (0x1d) plen 5 > ACL data: handle 42 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x > HCI Event: Read Remote Supported Features (0x0b) plen 11 > ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x > HCI Event: Number of Completed Packets (0x13) plen 5 > ACL data: handle 42 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 1 scid 0x0040 < ACL data: handle 42 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x scid 0x0040 result 2 status 0 Connection refused - PSM not supported > HCI Event: Number of Completed Packets (0x13) plen 5 > HCI Event: Disconn Complete (0x05) plen 4 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: ReMoKo and openSuSE 11
and when i do " hcitool -cc 'mycomputermacadd' " it connects and shows connected on the pc for a second then drops it , not much experience here ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: ReMoKo and openSuSE 11
problem is when we go to the this input devices wizard and say add new devices it finds the openmoko bluetooth then press the button setup and it says " Failed to Create input device for 'device' " ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
OSX OpenMoko Flasher trying to flash wrong partition (was: Re: [FDOM] new release 20080927)
Ahh, using the command line dfu-util unstead of the MacOS OpneMoko-Flasher I could start flashing. It seems that pointing out the FDOM download location lists the .jffs as a RootFS, but the the FreeRunner is reporting it is flashing to the partition "factory". It seems the graphical frontend is becoming too outdated to be used anymore ... Hope that helps others ... GTalk:neubauer.peter Skypepeter.neubauer ICQ18762544 Phone +46704 106975 LinkedIn http://www.linkedin.com/in/neubauer Twitter http://twitter.com/peterneubauer http://www.neo4j.org - New Energy for Data - the Graph Database. http://www.ops4j.org - New Energy for OSS Communities - Open Participation Software. http://www.qi4j.org- New Energy for Java - Domain Driven Development. On Sat, Sep 27, 2008 at 6:42 PM, Peter Neubauer <[EMAIL PROTECTED]> wrote: > Hi there, > trying to flash the new releases ...jffs as roofs, I get an exception > not being able to flash from dfu-util and on the FreeRunner, "End of > write exceeds particion end". Anything in my setup that is wrong? > > /peter > > GTalk:neubauer.peter > Skypepeter.neubauer > ICQ18762544 > Phone +46704 106975 > LinkedIn http://www.linkedin.com/in/neubauer > Twitter http://twitter.com/peterneubauer > > http://www.neo4j.org - New Energy for Data - the Graph Database. > http://www.ops4j.org - New Energy for OSS Communities - Open > Participation Software. > http://www.qi4j.org- New Energy for Java - Domain Driven Development. > > > > > On Sat, Sep 27, 2008 at 5:15 AM, David Samblas > <[EMAIL PROTECTED]> wrote: >> Hi all, >> on http://compartida.net/openmoko/FDOM/ you have disponible the new FDOM >> release. >> I have just erase previous release because there are some annoying bugs >> withs calls and no sound. >> But his has gone thanks to nickd, >> >> This release is not as tested as 2008.08 ones but include things, that >> sure, gonna make you smile, 29 Games :), orrery 2.0, a mplayer frontend >> pythm, and things than have the last updated not anounced jalimo with >> java se and me, navit, linphone (not tested but surely some people will >> smile twice, isn't it Michel Siloh? :) ) in addition to FDOM >> "classics" :) >> >> As you may notice this is a large amount of programs so in order to not >> blow away the home with icons I have included a raw,dirty, and a little >> bit slow script in pygtk that acts as popupmenu /usr/bin/FDsubmenu.py, >> surely a c/elf program will be more quick and integrated but just I have >> no time to learn it(yet). Futures versions will include the icon image. >> Feel free to modify and add features of course. >> >> Regarding colaborations , First thanks nacho and armin because without >> them this release will has not been posible, >> if you want to colaborate reporting bugs,improvements or sugestions we >> have a project in http://projects.openmoko.org/projects/fdom/ with a >> devel list >> http://lists.projects.openmoko.org/mailman/listinfo/fdom-development >> >> thanks to armin, we have also a svn server svn://zoup.org/Fdom with an >> 2008.09 that we want to transform in a better FDOM but here I call for >> help, Armin has his neo temporaly out of order, and I was unable to put >> the svn checkout to boot in a sd card, I want to do this to be able to >> have a quick way to summit changes, and have a more efective way to make >> various people to tweak the distro at same time. >> So if any one succeded to boot froma svn extraction please contacr us to >> tell us how >> I will try to update the wiki tomorrow with the modifications but any >> help will be apreciated here too :) >> >> I have not included the kernel image because still the 2008.09 one >> http://downloads.openmoko.org/releases/Om2008.9/Om2008.9.uImage.bin >> >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [FDOM] new release 20080927
I've uploaded this to our mirror on http://openmoko.truebox.co.uk/trueboxportal/index.php?wk=Mirrors - "David Samblas" <[EMAIL PROTECTED]> wrote: > Hi all, > on http://compartida.net/openmoko/FDOM/ you have disponible the new > FDOM > release. > I have just erase previous release because there are some annoying > bugs > withs calls and no sound. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [FDOM]: where are the sources?
FDOM is not source based, is basically a backup of my phone :), I(we) install a 2008.X base distro and then add packages through opkg and fix some things manually , tweaking config files and adding packages from other repositories resolving dependencies manually too. We are creating a svn server with a full rootfs to be able to install it on the phone and commit directly from the phone the tweaks we do, but actualy I was unable to boot from the checkout of the svn more info at the fdom-devel list http://lists.projects.openmoko.org/pipermail/fdom-development/ Regards David Samblas El sáb, 27-09-2008 a las 20:46 +0200, [EMAIL PROTECTED] escribió: > Hello, > is there an openembedded repository of FDOM... > or how can i can build it and add bb files? > > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [FDOM] new release 20080927
Peter Neubauer wrote: > Hi there, > trying to flash the new releases ...jffs as roofs, I get an exception > not being able to flash from dfu-util and on the FreeRunner, "End of > write exceeds particion end". Anything in my setup that is wrong? > > /peter > > GTalk:neubauer.peter > Skypepeter.neubauer > ICQ18762544 > Phone +46704 106975 > LinkedIn http://www.linkedin.com/in/neubauer > Twitter http://twitter.com/peterneubauer > > http://www.neo4j.org - New Energy for Data - the Graph Database. > http://www.ops4j.org - New Energy for OSS Communities - Open > Participation Software. > http://www.qi4j.org- New Energy for Java - Domain Driven Development. > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > Might be writing it to the wrong alternative. Using dfu-util the alternative should be rootfs. Also make sure it is writing to the openmoko, there is the possibility, like with my laptop, that you'll have multiple dfu capable devices. -Shawn ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [FSO] How to develop with Qt
Hi Nicola, On Saturday, September 27, 2008 08:13:18 Nicola Mfb wrote: > That's very nice, Kelvie. > I'm still trying to get a working and safe oetree with qt library inside > :). The first time i tried with the org.openembedded.dev branch and my > typical angstrom configured local.conf file, but it got a compilation error > on uicmoc4-native. After that i tried with the fso openmoko conf file, it > failed again but i noted that the preferred version of qt4 there was 4.3.3 > instead of 4.4.1. I remembered that in org.openembedded.stable there was > 4.3.3 version, so i tried again with the stable branch. It compiled fine > but did not create all the requested ipk (empty). I managed a bit on the > qt_packaging.inc recipie and finally i got a working qt-oe-tree, i was able > to compile a my application too. I bitbaked the last fso unstable image and > flashed the phone with it, setupped a fake feed server on my oe tree, added > it to feeds on the phone and did opkg update, opkg install qt4-x11-free, > opkg install my-application, and after that i was able to start it adding a > simple DISPLAY=:0. > But i'm not very happy of this as it's not simple and i do not like to mix > different branches. > Please share your experience on this... > Next time try separating your text into shorter paragraphs, it's easier to read :) I hadn't encountered any of these problems -- I got python-pyqt built against the org.openembedded.stable tree (that is, the 4.3.3 version), and installed qt4-x11-free-4.4.1 (from angstrom). They are still binary compatible, and it just worked on my Neo, except for the fact that I have to make sure LD_LIBRARY_PATH doesn't point to /opt/Qtopia first before starting python (as their libraries have the same name, and most of the same functions, but are missing some symbols such as QX11EmbedWidget). Cheers, -- Kelvie Wong ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Development environment suggestion ?
Hello community lists ! I just read the mail "call for community action" I would make som suggestions for making developing openmoko software more "easy". Why not create some virtual machines with all compilingtools and needed software installed to "get ready" for bugfixing/developing openmoko softwares. This may be virtualbox images.. Nothing fancy, just ubuntu with toolchain, maybe even a "ready" eclipse version. Publish this by torrents, Maybe even with "good" to go software used during development. I spent lots of time before i got a working environment to develop/debug my openmoko in. greetings ! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [debian/zhone] Send an SMS
On Fri, 2008-09-26 at 19:42 +0100, Neil Jerram wrote: > 2008/9/26 Michael 'Mickey' Lauer <[EMAIL PROTECTED]>: > > Oh, the testing UI. Yes, you can send messages with that one as well. > > Push 'Messages', then chose a contact from your SIM, then compose your > > message, then it's going into the outbox and will be sent. > > Hm. I couldn't make anything like that work. I'll try again though > if/when I have Debian installed again. In messages you need to push the button in the middle, then you will get a small menu. Jan ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Getting Zhone to work on Om-testing
> Hi, > > I've been trying to get FSO D-bus api working on the OM-testing > distribution (from http://downloads.openmoko.org/daily/) > > The zhone package available in testing installs fine and D-bus seems to > work. I can query with mickeydbus and I can see incoming events when I > call the phone. > > The Neo vibrates, but Zhone doesn't react. I can also use Zhone to call > another phone. The other phone rings and Zhone detects that it has been > answered, but that's about it. No sound and Zhone doesn't detect when I > hangup. > > Zhone says "No dbus", but cleary it can do something with the D-bus. As > registering on the GSM network and make call. > > Also strange: frameworkd seems to consume a lot of CPU. (around 80%). > > What is needed to get a basic FSO framework to run on testing? > > /Peter > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > WOW!!! great...I'd really like to have FSO in OM2008.x With that I could use it as a phone... For that i'll have to add the missed calls features...but I don't think that would be hard: A phone normally save the missed calls on the sim card(enter the pin before using theses commands): AT+CPBS=? AT+CPBS="MC" AT+CPBR=? AT+CPBR= result of AT+CPBR=? here's where I found them: http://gatling.ikk.sztaki.hu/~kissg/gsm/at+c.html I wonder if FSO stores it in the sim card when a call is missed By the way...i had made calls with my original phone,then I've put the card in the openmoko, booted on qtopia,rebooted on FSO,rebooted in qtopia...and switched off my phone...and put back my sim card into the old phone and the calls made were erased...that's a minor issue but still...is it a known bug/feature? is it FSO or qtopia? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[FDOM]: where are the sources?
Hello, is there an openembedded repository of FDOM... or how can i can build it and add bb files? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Getting Zhone to work on Om-testing
Hi, I've been trying to get FSO D-bus api working on the OM-testing distribution (from http://downloads.openmoko.org/daily/) The zhone package available in testing installs fine and D-bus seems to work. I can query with mickeydbus and I can see incoming events when I call the phone. The Neo vibrates, but Zhone doesn't react. I can also use Zhone to call another phone. The other phone rings and Zhone detects that it has been answered, but that's about it. No sound and Zhone doesn't detect when I hangup. Zhone says "No dbus", but cleary it can do something with the D-bus. As registering on the GSM network and make call. Also strange: frameworkd seems to consume a lot of CPU. (around 80%). What is needed to get a basic FSO framework to run on testing? /Peter ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
A Call for community action
The other day I was pondering all the things the community does for us. They give us new ideas, test our product and give us honest feedback, keep us true to our commitment for openness ( the idea to release the CAD files came from the community, help us market the product, and they fix bugs. Recently I was reviewing the goals for 2008.10, and I wondered what else is on the list of things that need fixing. SO I asked the testing team to give me a list of bugs that didnt make the 2008.10 list. My idea. throw these out to community and see if folks would pick a bug and try to fix it, actually sign up to try to fix it, so we get a coordinated effort. Sean liked the idea and I thought it was worth a try. Here is the list of Bugs, look through the list and if your moved to action just respond with a mail to the list: Subject line: I got bug #1234. And more than one person can work a bug. 1. 1442 : [Qtopia-Dialer] Dialing through the headset does not working (https://docs.openmoko.org/trac/ticket/1442) 2. 1460 : [Qtopia-Dialer] number is cut if number is too long on call detail screen((https://docs.openmoko.org/trac/ticket/1460) 3. 1483 : [Qtopia-Clock] The map shows black shadow short second when click country (https://docs.openmoko.org/trac/ticket/1483) 4. 1490 : [Qtopia-Dialer] Join and Split function do not working during connecting third party call (https://docs.openmoko.org/trac/ticket/1490) 5. 1493 : [system software] when press power button makes some noise during suspend time(https://docs.openmoko.org/trac/ticket/1493) 6. 1499 : [Qtopia-Message] there is function to delete default template after create new template [ttps://docs.openmoko.org/trac/ticket/1499) 7. 1507 : [Qtopia-Message] Messages total number does not appear immediately when enter Messages Main screen (https://docs.openmoko.org/trac/ticket/1507) 8. 1509 : [Qtopia-Message] Selected all of messages do not unselected after press back button(https://docs.openmoko.org/trac/ticket/1509) 9. 1516 : [Qtopia-Message]It does not go back to Messages history tab from detail screen when press back button (https://docs.openmoko.org/trac/ticket/1516) 10. 1524 : [Installer ] unable to uninstall kobodeluxe package through assassin (https://docs.openmoko.org/trac/ticket/1524) 11. 1532 : [Qtopia-Clock] time and country displayed outside of screen on world map (https://docs.openmoko.org/trac/ticket/1532) 12. 1547 :[ Qtopia-Message] Option menu is ugly when create new message (https://docs.openmoko.org/trac/ticket/1547) 13. 1563 : [E-illume] unable to change 12hour time format(https://docs.openmoko.org/trac/ticket/1563) 14. 1573 : [Qtopia-Email] Remove E-mail (https://docs.openmoko.org/trac/ticket/1573) 15. 1604 : [Qtopia-Dialer] keypad will shows black bit if press "*" button 3 times quickly (https://docs.openmoko.org/trac/ticket/1604) 16. 1621 : [System software]Occur white screen end of suspend, it happen only specific phone (https://docs.openmoko.org/trac/ticket/1621) 17. 1630 : [Qtopia-Dialer]"holding attempt Failed" Alert message and unable to hold function with prepaid SIM (https://docs.openmoko.org/trac/ticket/1630) 18. 1652 : [QT-Contact]add group members functionality is busted (https://docs.openmoko.org/trac/ticket/1652) 19. 1736 : [Boot screen] it goes to sleep during Booting and never wake up (https://docs.openmoko.org/trac/ticket/1736) 20. 1795 : [Qtopia-keyboard] missing keys (https://docs.openmoko.org/trac/ticket/1795) 21. 1887 : [Qtopia-call screen] incoming call screen overlap with calendar (https://docs.openmoko.org/trac/ticket/1887) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Re: dfu-error -71
Thanks for your answer. After some additional research (fairly chaotic, it appeared I can't flash anything), I managed to shed some more light on the problem: - It cut the download at some 50 MB no matter what image I was using - after connecting the cable to another computer (no intermediate cables) it flashed o it went faster than ever (maybe because I didn't use root account on that computer before as normal user could run it just fine) o it was a stable version of a distro I'm using (the other computer has *some* stability issues) Regards rhn > I have had bad experience with the dfu_util before. It appeared almost > the same as your problem. It would download part way and show up as an > error. > > I originally had a USB extension cable to the back of my computer. Bad > idea. I ended up using the (fairly short) cable that came out of the box > and it worked perfectly. My connections are sometimes loose though. > Maybe this will help. > > -Boris > > > On Sat, 2008-09-27 at 13:42 +0200, rhn wrote: > > Hi > > I've just tried to flash my freerunner with the newest FDOM and ran into a > > problem with dfu-util. > > Long story short, here's the console output: > > > > > > [EMAIL PROTECTED] files]# ./dfu-util -a rootfs -R -D > > Fat_and_Dirty_OM.200809_20080927.rootfs.jffs2 > > dfu-util - (C) 2007 by OpenMoko Inc. > > This program is Free Software and has ABSOLUTELY NO WARRANTY > > > > Opening USB Device 0x:0x... > > Claiming USB DFU Runtime Interface... > > Determining device status: state = appIDLE, status = 0 > > Device really in Runtime Mode, send DFU detach request... > > Resetting USB... > > Opening USB Device... > > Found Runtime: [0x1d50:0x5119] devnum=13, cfg=0, intf=0, alt=6, > > name="rootfs" > > Claiming USB DFU Interface... > > Setting Alternate Setting ... > > Determining device status: state = dfuIDLE, status = 0 > > dfuIDLE, continuing > > Transfer Size = 0x1000 > > bytes_per_hash=2589982 > > Starting download: [###dfu_download error -71 > > Error during download > > > > > > The device used to flash without errors and I can't find any explanation to > > this error code. > > The file's checksum is correct and it breaks always at the same place. > > > > I hope the FDOM team will be able to do something about it because I can't > > wait to try it out :) > > > > ___ > > Openmoko community mailing list > > community@lists.openmoko.org > > http://lists.openmoko.org/mailman/listinfo/community > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [debian] Warning: automatic SMS sending
Am Samstag, den 27.09.2008, 17:00 +0200 schrieb Annika Thiel: > I installed debian and tested around with zhone. At some point the > phone sent _every_ SMS saved on my SIM card back to the sender without > any notice. I became aware of it, when the phone of my friend received > several messages send from me. I don't know why it did that, I wasn't > doing anything special. > So please be warned! Sorry 'bout that, but this sounds as if your previous phone messed in a non-standard way with the SMS by tagging them as 'unsent'. :M: ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [FDOM] dfu-error -71
I have had bad experience with the dfu_util before. It appeared almost the same as your problem. It would download part way and show up as an error. I originally had a USB extension cable to the back of my computer. Bad idea. I ended up using the (fairly short) cable that came out of the box and it worked perfectly. My connections are sometimes loose though. Maybe this will help. -Boris On Sat, 2008-09-27 at 13:42 +0200, rhn wrote: > Hi > I've just tried to flash my freerunner with the newest FDOM and ran into a > problem with dfu-util. > Long story short, here's the console output: > > > [EMAIL PROTECTED] files]# ./dfu-util -a rootfs -R -D > Fat_and_Dirty_OM.200809_20080927.rootfs.jffs2 > dfu-util - (C) 2007 by OpenMoko Inc. > This program is Free Software and has ABSOLUTELY NO WARRANTY > > Opening USB Device 0x:0x... > Claiming USB DFU Runtime Interface... > Determining device status: state = appIDLE, status = 0 > Device really in Runtime Mode, send DFU detach request... > Resetting USB... > Opening USB Device... > Found Runtime: [0x1d50:0x5119] devnum=13, cfg=0, intf=0, alt=6, name="rootfs" > Claiming USB DFU Interface... > Setting Alternate Setting ... > Determining device status: state = dfuIDLE, status = 0 > dfuIDLE, continuing > Transfer Size = 0x1000 > bytes_per_hash=2589982 > Starting download: [###dfu_download error -71 > Error during download > > > The device used to flash without errors and I can't find any explanation to > this error code. > The file's checksum is correct and it breaks always at the same place. > > I hope the FDOM team will be able to do something about it because I can't > wait to try it out :) > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [FDOM] new release 20080927
Hi there, trying to flash the new releases ...jffs as roofs, I get an exception not being able to flash from dfu-util and on the FreeRunner, "End of write exceeds particion end". Anything in my setup that is wrong? /peter GTalk:neubauer.peter Skypepeter.neubauer ICQ18762544 Phone +46704 106975 LinkedIn http://www.linkedin.com/in/neubauer Twitter http://twitter.com/peterneubauer http://www.neo4j.org - New Energy for Data - the Graph Database. http://www.ops4j.org - New Energy for OSS Communities - Open Participation Software. http://www.qi4j.org- New Energy for Java - Domain Driven Development. On Sat, Sep 27, 2008 at 5:15 AM, David Samblas <[EMAIL PROTECTED]> wrote: > Hi all, > on http://compartida.net/openmoko/FDOM/ you have disponible the new FDOM > release. > I have just erase previous release because there are some annoying bugs > withs calls and no sound. > But his has gone thanks to nickd, > > This release is not as tested as 2008.08 ones but include things, that > sure, gonna make you smile, 29 Games :), orrery 2.0, a mplayer frontend > pythm, and things than have the last updated not anounced jalimo with > java se and me, navit, linphone (not tested but surely some people will > smile twice, isn't it Michel Siloh? :) ) in addition to FDOM > "classics" :) > > As you may notice this is a large amount of programs so in order to not > blow away the home with icons I have included a raw,dirty, and a little > bit slow script in pygtk that acts as popupmenu /usr/bin/FDsubmenu.py, > surely a c/elf program will be more quick and integrated but just I have > no time to learn it(yet). Futures versions will include the icon image. > Feel free to modify and add features of course. > > Regarding colaborations , First thanks nacho and armin because without > them this release will has not been posible, > if you want to colaborate reporting bugs,improvements or sugestions we > have a project in http://projects.openmoko.org/projects/fdom/ with a > devel list > http://lists.projects.openmoko.org/mailman/listinfo/fdom-development > > thanks to armin, we have also a svn server svn://zoup.org/Fdom with an > 2008.09 that we want to transform in a better FDOM but here I call for > help, Armin has his neo temporaly out of order, and I was unable to put > the svn checkout to boot in a sd card, I want to do this to be able to > have a quick way to summit changes, and have a more efective way to make > various people to tweak the distro at same time. > So if any one succeded to boot froma svn extraction please contacr us to > tell us how > I will try to update the wiki tomorrow with the modifications but any > help will be apreciated here too :) > > I have not included the kernel image because still the 2008.09 one > http://downloads.openmoko.org/releases/Om2008.9/Om2008.9.uImage.bin > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Install Debian without internet access
* Matthias Camenzind <[EMAIL PROTECTED]> [2008-09-27 07:19 +0200]: > > This is what i did on ubuntu: > sudo iptables -N RH-Firewall-1-INPUT > sudo iptables -I RH-Firewall-1-INPUT -s 192.168.0.202 -j ACCEPT I think these two lines are useless (and the RH- prefix makes me think it comes from a RedHat based system). Anyway, here you're creating a chain you do not seem to use (unless it is magically used by Ubuntu). > sudo iptables -t nat -A POSTROUTING -j MASQUERADE -s 192.168.0.0/24 This one is necessary; you'd better specify the output interface with -o (for example -o eth0). > sudo iptables -t nat -A PREROUTING -p tcp -s 192.168.0.202 -d 192.168.0.200 > --sport 0:65535 --dport 0:65535 -j DNAT --to-destination 192.168.1.1 > sudo iptables -t nat -A PREROUTING -p udp -s 192.168.0.202 -d 192.168.0.200 > --sport 0:65535 --dport 0:65535 -j DNAT --to-destination 192.168.1.1 I wonder what it's supposed to do. > sudo sysctl -w net.ipv4.ip_forward=1 Necessary. > and I installed and run Firestarter (not sure if it was necessary) Don't think so :) -- MiKael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: kobodeluxe - how do you quit?
Hi, Al Johnson schrieb: >> Presumably it's this bug: >> >> https://docs.openmoko.org/trac/ticket/1244#comment:41 >> >> Priority "highest", but it hasn't been worked on in a while... >> It's affecting my work on Duke 3D, too > > I don't think it's anything to do with that bug. It's running in portrait and > I think it's 480x640. The whole screen responds to touch which it wouldn't do > in 240x320 according to the bug report. I think it's just the way an app with > a keyboard interface was ported to work on a device with only a touchscreen. a real showstopper for kobodeluxe is this bug: https://docs.openmoko.org/trac/ticket/1381 Regards Robert signature.asc Description: OpenPGP digital signature ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: kobodeluxe - how do you quit?
Al Johnson schrieb: > IIRC tap at the top of the screen moves menu selection up, tapping at the > bottom moves it down and tapping in the middle accepts the current menu item. > If you try to treat it as a point-and-click app by tapping Quit you end up > accepting new game instead. Took me a while to work that one out, usually > after accidentally starting it when I was trying to scroll through the > Applications menu! Yay! The news is spreading. :D Regards Robert signature.asc Description: OpenPGP digital signature ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: kobodeluxe - how do you quit?
Hi, W.Kenworthy schrieb: > I installed the kobodeluxe game for the kid, but we cant figure out how > to exit it :( > > Even if you go through 5 new lives and get the menu, hitting quit with a > stylus just takes you back into the game. Ended up removing the > battery. > > How? Paste of a part of the patch that adds touchscreen functionality to kobodeluxe: Index: KoboDeluxe-0.5.1/README === --- KoboDeluxe-0.5.1.orig/README2008-02-11 01:10:23.0 +0100 +++ KoboDeluxe-0.5.1/README 2008-02-11 01:17:30.0 +0100 @@ -39,6 +39,12 @@ key diagonals. Escape enters the meny system, from where it is possi- ble to change settings, start a new game or exit the game. + In case the touchscreen support has been compiled in the menu can be + controlled by clicking the frame borders. Touching the inner part of + the screen is like a button press. In the game mode a click in the + upper right corner activates pause mode and the lower right corner es- + capes to the menu. + Sure. Difficult to find out when you don't look at the README but at least its documented somewhere. ;) Regards Robert signature.asc Description: OpenPGP digital signature ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [FSO] How to develop with Qt
On Fri, Sep 26, 2008 at 6:22 PM, Kelvie Wong <[EMAIL PROTECTED]> wrote: > > In the meantime, I've managed to get PyQt4 working (hooked up against > Qt-x11); > this eliminates the need for a toolchain (or even building apps in > general). > There's another thread about that on this list. > > -- > Kelvie Wong > That's very nice, Kelvie. I'm still trying to get a working and safe oetree with qt library inside :). The first time i tried with the org.openembedded.dev branch and my typical angstrom configured local.conf file, but it got a compilation error on uicmoc4-native. After that i tried with the fso openmoko conf file, it failed again but i noted that the preferred version of qt4 there was 4.3.3 instead of 4.4.1. I remembered that in org.openembedded.stable there was 4.3.3 version, so i tried again with the stable branch. It compiled fine but did not create all the requested ipk (empty). I managed a bit on the qt_packaging.inc recipie and finally i got a working qt-oe-tree, i was able to compile a my application too. I bitbaked the last fso unstable image and flashed the phone with it, setupped a fake feed server on my oe tree, added it to feeds on the phone and did opkg update, opkg install qt4-x11-free, opkg install my-application, and after that i was able to start it adding a simple DISPLAY=:0. But i'm not very happy of this as it's not simple and i do not like to mix different branches. Please share your experience on this... Regards Nicola ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[debian] Warning: automatic SMS sending
Hi, I installed debian and tested around with zhone. At some point the phone sent _every_ SMS saved on my SIM card back to the sender without any notice. I became aware of it, when the phone of my friend received several messages send from me. I don't know why it did that, I wasn't doing anything special. So please be warned! Regards, Anni ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Very interested onlooker
Minh Ha Duong wrote: > I have not read anything about Abiword on FreeRunner. It should be possible to run Abiword on Debian's distro. I run FDOM (2008.9) - depending on what you need to do text editing is possible and it is there :) -- www.tdobson.net If each of us have one object, and we exchange them, then each of us still has one object. If each of us have one idea, and we exchange them, then each of us now has two ideas. - George Bernard Shaw ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Support in Openmoko for Partial Array Self Refresh
Hello, I am newly introduced to openmoko. I am working on a power management project on mobile devices. I searched on whether the memory management unit of openmoko supports the PASR (partial array self refresh) feature that is available in hardware in DRam used by Openmoko, but i could not find it. Can anyone please tell me if this feature is supported by Openmoko? Regards, Shreyas. Unlimited freedom, unlimited storage. Get it now, on http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html/___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: kobodeluxe - how do you quit?
Al Johnson wrote: > On Thursday 25 September 2008, W.Kenworthy wrote: >> I installed the kobodeluxe game for the kid, but we cant figure out how >> to exit it :( >> >> Even if you go through 5 new lives and get the menu, hitting quit with a >> stylus just takes you back into the game. Ended up removing the >> battery. >> >> How? > > IIRC tap at the top of the screen moves menu selection up, tapping at the > bottom moves it down and tapping in the middle accepts the current menu item. > If you try to treat it as a point-and-click app by tapping Quit you end up > accepting new game instead. Took me a while to work that one out, usually > after accidentally starting it when I was trying to scroll through the > Applications menu! Yeah. the four corners of the screen and then the centre of the screen are 5 different "buttons" trial and error mens you eventually work out which is which :) -- www.tdobson.net If each of us have one object, and we exchange them, then each of us still has one object. If each of us have one idea, and we exchange them, then each of us now has two ideas. - George Bernard Shaw ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om2008.9] Qwerty button and spanner/wrench
On Saturday 27 September 2008, Yorick Moko wrote: > I flashed Om2009 and changed my feeds to testing and opkg upgraded my > gta02. There used to be a illume-config and an illume-config-illume in the > repositories to enable the qwerty button and the spanner. I can't find them > anymore (not in testing, not in unstable) > > Does anybody know how to get them back? See the bottom of this page: http://wiki.openmoko.org/wiki/Keyboard_Toggle ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: kobodeluxe - how do you quit?
On Saturday 27 September 2008, Charles-Henri Gros wrote: > Al Johnson wrote: > > On Thursday 25 September 2008, W.Kenworthy wrote: > >> I installed the kobodeluxe game for the kid, but we cant figure out how > >> to exit it :( > >> > >> Even if you go through 5 new lives and get the menu, hitting quit with a > >> stylus just takes you back into the game. Ended up removing the > >> battery. > >> > >> How? > > > > IIRC tap at the top of the screen moves menu selection up, tapping at the > > bottom moves it down and tapping in the middle accepts the current menu > > item. If you try to treat it as a point-and-click app by tapping Quit > > you end up accepting new game instead. Took me a while to work that one > > out, usually after accidentally starting it when I was trying to scroll > > through the Applications menu! > > Presumably it's this bug: > > https://docs.openmoko.org/trac/ticket/1244#comment:41 > > Priority "highest", but it hasn't been worked on in a while... > It's affecting my work on Duke 3D, too I don't think it's anything to do with that bug. It's running in portrait and I think it's 480x640. The whole screen responds to touch which it wouldn't do in 240x320 according to the bug report. I think it's just the way an app with a keyboard interface was ported to work on a device with only a touchscreen. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[FDOM] dfu-error -71
Hi I've just tried to flash my freerunner with the newest FDOM and ran into a problem with dfu-util. Long story short, here's the console output: [EMAIL PROTECTED] files]# ./dfu-util -a rootfs -R -D Fat_and_Dirty_OM.200809_20080927.rootfs.jffs2 dfu-util - (C) 2007 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY Opening USB Device 0x:0x... Claiming USB DFU Runtime Interface... Determining device status: state = appIDLE, status = 0 Device really in Runtime Mode, send DFU detach request... Resetting USB... Opening USB Device... Found Runtime: [0x1d50:0x5119] devnum=13, cfg=0, intf=0, alt=6, name="rootfs" Claiming USB DFU Interface... Setting Alternate Setting ... Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing Transfer Size = 0x1000 bytes_per_hash=2589982 Starting download: [###dfu_download error -71 Error during download The device used to flash without errors and I can't find any explanation to this error code. The file's checksum is correct and it breaks always at the same place. I hope the FDOM team will be able to do something about it because I can't wait to try it out :) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om2008.9] illume && FreeBSD 7.0
> the Wiki explains file how to install > 'illume' in Ubuntu or other Linuxes; MayI ask where is this page? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
installing debian without the freerunner?
Hi there! i have some problems with my freerunner atm, but i want to install debian on it. is there a way to do that with the computer instead with the freerunner? also the freerunner has a very small connection, usb and wifi are both too slow for me. so, is there a way? ciao, Zachso ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Upgrading FDOM
On Sat, Sep 27, 2008 at 5:15 AM, David Samblas <[EMAIL PROTECTED]> wrote: > El vie, 26-09-2008 a las 10:36 -0700, Kelvie Wong escribió: >> So, it seems that the new FDOM got released yesterday (today?): >> http://wiki.openmoko.org/wiki/FDOM#version__20080925 >> >> Anyone know how (if it is even possible) to upgrade to this without having to >> reflash the entire rootfs (such as via a opkg upgrade using some custom >> feed)? > we are working on a script than convert any standard 2008.X updated into > a FDOM to achieve this. sounds nice ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
