Re: Freerunner won't charge
So, there's no way to fix this thing? If I need to take it to an electronics repair shop to get it fixed I can, just need to know what part(s) will need to be repaired/replaced. Anyone know were I can get hold of schematics for the mainboard? If it's a simple repair proceedure I might be able to do it myself even. --Ron ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Freerunner won't charge
01.07.2011 17:13, Ronald Tallent пишет: > So, there's no way to fix this thing? If I need to take it to an > electronics repair shop to get it fixed I can, just need to know what > part(s) will need to be repaired/replaced. Anyone know were I can get > hold of schematics for the mainboard? If it's a simple repair proceedure > I might be able to do it myself even. > > --Ron > > > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > It can be software bug. I had that on fresh shr about 3 month ago. Rolling back cured ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[debian] cannot bootstrap libc6
Hello, I'm trying to install Debian on Openmoko Freerunner and have encountered the following problem. Both cdebootstrap and debootstrap fail to install a basic Debian system (stage "debian" of install.sh). Packages are downloaded and extracted, but dpkg is refusing to install libc6: === [...] I: Extracting zlib1g... I: Installing core packages... W: Failure trying to run: chroot /mnt/debian dpkg --force-depends --install /var/cache/apt/archives/libc6_2.13-8_armel.deb root@hackable1:~# chroot /mnt/debian dpkg --force-depends --install /var/cache/apt/archives/libc6_2.13-8_armel.deb (Reading database ... 349 files and directories currently installed.) Unpacking libc6 (from .../libc6_2.13-8_armel.deb) ... A copy of the C library was found in an unexpected directory: '/lib/arm-linux-gnueabi/libc-2.13.so' It is not safe to upgrade the C library in this situation; please remove that copy of the C library or get it out of '/lib/arm-linux-gnueabi' and try again. dpkg: error processing /var/cache/apt/archives/libc6_2.13-8_armel.deb (--install): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/libc6_2.13-8_armel.deb === If libc-2.13.so and libc.so.6 are then moved to /lib, then dpkg begins to wail about /lib/arm-linux-gnueabi/libdl-2.13.so, which suddenly emerges out of nowhere. On next iteration there appears libm... So, as far as I can see, all these files are just being unpacked from the very package I ask dpkg to install. Does this mean that Debian sid (unstable) armel is broken at the moment? How can this problem be dealt with? Changing --force-depends to --force-all does not help. -- Dmitry Chistikov ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Freerunner won't charge
> > > It can be software bug. I had that on fresh shr about 3 month ago. > Rolling back cured Don't think it's software, I rolled back to one of my previously known good backups and still had the problem. Also, if it was software it should still charge when flashing or when sitting on the NAND/NOR boot menus shouldn't it? It used to, not it doesn't. Anyone have any other ideas? --Ron ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Freerunner won't charge
Hi, Ronald Tallent writes: > So, there's no way to fix this thing? If I need to take it to an > electronics repair shop to get it fixed I can, just need to know what > part(s) will need to be repaired/replaced. Anyone know were I can get > hold of schematics for the mainboard? If it's a simple repair proceedure > I might be able to do it myself even. Schematics are available from [1]. I hope you'll find the cause and will be able to use your cool device again :) Basically, what you need to know is that charging is controlled by the PMU chip, PCF50633, it's connected over SPI bus and you can easily view dump of its registers from [2] (newer kernels might have a slightly different path but the same filename). Schematics are pretty much obvious but if you have any questions, feel free to ask here or on #openmoko-cdevel irc channel. [1] http://people.openmoko.org/joerg/schematics/ [2] /sys/class/i2c-adapter/i2c-0/0-0073/dump_regs -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:fercer...@gmail.com ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [debian] cannot bootstrap libc6
2011/7/1 Dmitry Chistikov : > I'm trying to install Debian on Openmoko Freerunner and have encountered > the following problem. Both cdebootstrap and debootstrap fail to install > a basic Debian system (stage "debian" of install.sh). Packages are > downloaded and extracted, but dpkg is refusing to install libc6: ... > Does this mean that Debian sid (unstable) armel is broken at the moment? > How can this problem be dealt with? Changing --force-depends to --force-all > does not help. I'm not an expert on the installer, but unfortunately it may mean so. You can try to use stable repositories instead by modifying the install.sh script - you just need to make sure that you then don't specify any phone software like Zhone at the install time, since those are only available with the E17 that is in unstable and not in the latest Debian release. I've been meaning to try out if that'd work for some time, but haven't got a suitable extra microsd card and time slot to check it out. Then if you get a minimal installation ongoing, it's much easier to install more software and experiment in a bootable system. The unstable anyway is in a shaky situation at the moment, as still the Python E17 dependencies are not in so they are also not installable. -Timo ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community