I rebuilded all from scratch and now i found uImage-2.6.24., so
make flash-qemu-local run successfull, howewer when i finally run make
run-qemu, u-boot loads the kernel and returns to it's main menu.
I'm not expert on u-boot, howewer i added -serial stdio to qemu, it gives:
U-Boot 1.3.2-moko12 (Sep 4 2008 - 17:27:20)
I2C: ready
DRAM: 128 MB
NAND: 64 MiB
Found Environment offset in OOB..
Video: 640x480x8 31kHz 59Hz
NAND read: device 0 offset 0x244000, size 0x5000
Reading data from 0x248e00 -- 100% complete.
20480 bytes read: OK
USB: S3C2410 USB Deviced
In:serial
Out: serial
Err: serial
neo_lcd_rst_switch: LCD reset.
jbt6k74_command: Display on.
neo_vib_switch: Buzz, buzz.
neo_vib_switch: Vibrator stopped.
neo_bl_switch: LCD Backlight now on.
GTA01Bv4 # boot
## Booting kernel from Legacy Image at 3010 ...
Image Name: Openmoko/2.6.24+git1+a1e97c61125
Created: 2008-09-04 13:37:58 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size:1894664 Bytes = 1.8 MB
Load Address: 30008000
Entry Point: 30008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
ERROR: image overwritten - must RESET the board to recover.
neo_gsm_switch: GSM disabled.
wath can i do now?
Nicola
On 9/3/08, Nicola Mfb [EMAIL PROTECTED] wrote:
I'm working an ubuntu hh to build and test asu.
I downloaded
http://svn.projects.openmoko.org/svnroot/mokomakefile/trunk/Makefile
changed OM_GIT_BRANCH in org.openmoko.asu.stable
after that i did make setup, make setup-machine-neo and make
openmoko-qtopia-x11-image.
The image was build successfull after several hours, but when i try to do
make flash-qemu-local i get an error saying
that is not possible to ls files in
build/tmp/deploy/glibc/images/neo1973/uImage-2.6.*-om-gta01.bin
What do i miss?
thanks
Nicola
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
