Re: No dropbear in om2008.12 ?
> And what about the terminal ? How come there isn't any in om2008.12 ? Or > is there and I have missed something ? No. There is none...until you have installed it, that is :) signature.asc Description: This is a digitally signed message part ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: No dropbear in om2008.12 ?
Le 22-12-2008, à 14:05:51 +0100, Alexey Feldgendler (ale...@feldgendler.ru) a écrit : > Lignes : 23 > > On Mon, 22 Dec 2008 13:50:37 +0100, steve wrote: > > > Then I rebooted and pluged in the usb cable and tried to connect, no > > success. I can ping 192.168.0.202 but not connect via ssh. I then tried > > to nmap the FR and the result was "all ports filtered". > > > > I finally decided to flash with the om2008.9 version, hoping that these > > problems would vanish but no, still same problem. > > Are you sure your own firewall is not blocking the access? Yes pretty sure. Haven't changed anything since the time it work. I'm using a udev rule and a script I found somewhere on the site to make the network run. Here is the output of 'iptables -L -t nat' : Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 192.168.20.0/24 anywhere MASQUERADE all -- 192.168.3.0/24 anywhere MASQUERADE all -- 192.168.10.0/24 anywhere MASQUERADE all -- 192.168.0.0/24 anywhere Yes I have multiple networks on my box. > Returning to a > version that worked for you before should have fixed it for you, unless > the reason is external to FR. That was my first guess, but it didn't work. What I find strange is that the ping works but nmap doesn't show an open ssh port. And what about the terminal ? How come there isn't any in om2008.12 ? Or is there and I have missed something ? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: No dropbear in om2008.12 ?
On Mon, 22 Dec 2008 13:50:37 +0100, steve wrote: > Then I rebooted and pluged in the usb cable and tried to connect, no > success. I can ping 192.168.0.202 but not connect via ssh. I then tried > to nmap the FR and the result was "all ports filtered". > > I finally decided to flash with the om2008.9 version, hoping that these > problems would vanish but no, still same problem. Are you sure your own firewall is not blocking the access? Returning to a version that worked for you before should have fixed it for you, unless the reason is external to FR. -- Alexey Feldgendler [ICQ: 115226275] http://feldgendler.livejournal.com ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: No dropbear in om2008.12 ?
I'm using OM2008.12 with no problems: networking and SSH works well. I had some problems the first time to install the terminal! Why they don't include terminal by default?! However, connecting the neo to pc through USB cable works for me. I gave the following command: sudo ifconfig usb0 192.168.0.200 netmask 255.255.255.0 and then ssh r...@192.168.0.202 and it's worked for me. I've noticed that if you are connected to a network that has different addresses (your IP different from 192.168.0.*) the connection could not work. So try to disconnect from the network (sudo ifconfig ethX down), connect the neo to USB, wait a few seconds, type again the above command and try again with ssh. It worked for me. Hope this can help you. - Original Message - From: steve To: community@lists.openmoko.org Subject: No dropbear in om2008.12 ? Date: Mon, 22 Dec 2008 13:50:37 +0100 Hi, Two months ago I bought the FR and installed the om2008.8 version without too much worry. This last week-end, after reading this list, I decided to flash the om2008.12 version. So I downloaded the kernel and the rootfs from here http://downloads.openmoko.org/releases/Om2008.12/ and then flashed it, no problem. Then I rebooted and pluged in the usb cable and tried to connect, no success. I can ping 192.168.0.202 but not connect via ssh. I then tried to nmap the FR and the result was "all ports filtered". After reading the differents lists and forums, it seems that one must reboot a second time after flashing in order to get networking running, which i did, but still no sucess. Then I figured I should maybe activate dropbear from within the FR but big surprise, there is no terminal! I finally decided to flash with the om2008.9 version, hoping that these problems would vanish but no, still same problem. Now I don't know what to do more. Any ideas ? Thanks, Steve ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Be Yourself @ mail.com! Choose From 200+ Email Addresses Get a Free Account at www.mail.com ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
No dropbear in om2008.12 ?
Hi, Two months ago I bought the FR and installed the om2008.8 version without too much worry. This last week-end, after reading this list, I decided to flash the om2008.12 version. So I downloaded the kernel and the rootfs from here http://downloads.openmoko.org/releases/Om2008.12/ and then flashed it, no problem. Then I rebooted and pluged in the usb cable and tried to connect, no success. I can ping 192.168.0.202 but not connect via ssh. I then tried to nmap the FR and the result was "all ports filtered". After reading the differents lists and forums, it seems that one must reboot a second time after flashing in order to get networking running, which i did, but still no sucess. Then I figured I should maybe activate dropbear from within the FR but big surprise, there is no terminal! I finally decided to flash with the om2008.9 version, hoping that these problems would vanish but no, still same problem. Now I don't know what to do more. Any ideas ? Thanks, Steve ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community