Re: Re: Re: Suspend/Resume Issue: Possible Hardware Problem?
Will do, the only problem is that I don't know how to suspend/resume in 2007.2. Wasn't it a terminal command, or something to that effect? apm -s or echo mem /sys/power/state ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Suspend/Resume Issue: Possible Hardware Problem?
Between attempts did you erase and reflash both the kernel and rootfs as well as remove all power for 30seconds (battery and usb) to completely reset the phone? Ben Robert Bieber wrote: When OM2008.8 was released, I flashed it to my Freerunner, and suspend and resume worked impeccably for the first couple of days I had it. After that, however, it started going into suspend and refusing to come out, even if called. I reflashed with 2008.8, but the problem persisted. I have since tried multiple reflashes of OM2008.8, FSO Milestone 2, and Qtopia, and none of them will allow the phone to come out of suspend. Given that the problem persists across distributions, it would seem as though there may be an issue with the phone itself. Does anyone else have any experience with this problem? Could there be a software fix, or am I going to have to have the phone replaced? Thank you, Robert Bieber ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Suspend/Resume Issue: Possible Hardware Problem?
known software bug - try 2007.2 which doesnt have it. BillK On Sat, 2008-08-16 at 11:41 -0400, Robert Bieber wrote: When OM2008.8 was released, I flashed it to my Freerunner, and suspend and resume worked impeccably for the first couple of days I had it. After that, however, it started going into suspend and refusing to come out, even if called. I reflashed with 2008.8, but the problem persisted. I have since tried multiple reflashes of OM2008.8, FSO Milestone 2, and Qtopia, and none of them will allow the phone to come out of suspend. Given that the problem persists across distributions, it would seem as though there may be an issue with the phone itself. Does anyone else have any experience with this problem? Could there be a software fix, or am I going to have to have the phone replaced? Thank you, Robert Bieber ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- William Kenworthy [EMAIL PROTECTED] Home in Perth! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Re: Suspend/Resume Issue: Possible Hardware Problem?
The problem isn't just occurring in 2008.8, the same happens in FSO and Qtopia. If it were a software issue, it would seem that reflashing would at least have it working as long as it worked in the first place, but I now have no ability to come out of suspend at all, even after flashing the phone (and I've now tried removing the battery for 30 seconds as well). Could it possibly be an issue with uBoot? That's the only piece of software I haven't reflashed yet... William Kenworthy wrote: known software bug - try 2007.2 which doesnt have it. BillK On Sat, 2008-08-16 at 11:41 -0400, Robert Bieber wrote: When OM2008.8 was released, I flashed it to my Freerunner, and suspend and resume worked impeccably for the first couple of days I had it. After that, however, it started going into suspend and refusing to come out, even if called. I reflashed with 2008.8, but the problem persisted. I have since tried multiple reflashes of OM2008.8, FSO Milestone 2, and Qtopia, and none of them will allow the phone to come out of suspend. Given that the problem persists across distributions, it would seem as though there may be an issue with the phone itself. Does anyone else have any experience with this problem? Could there be a software fix, or am I going to have to have the phone replaced? Thank you, Robert Bieber ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Suspend/Resume Issue: Possible Hardware Problem?
AFAIK they all use the same kernel. Look for a file called resume reason. -Nick Robert Bieber wrote: The problem isn't just occurring in 2008.8, the same happens in FSO and Qtopia. If it were a software issue, it would seem that reflashing would at least have it working as long as it worked in the first place, but I now have no ability to come out of suspend at all, even after flashing the phone (and I've now tried removing the battery for 30 seconds as well). Could it possibly be an issue with uBoot? That's the only piece of software I haven't reflashed yet... William Kenworthy wrote: known software bug - ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Re: Suspend/Resume Issue: Possible Hardware Problem?
FSO, 2008.8 and to some extent qtopia share a lot of code. Try 2007.2 while you are flashing things. BillK On Sun, 2008-08-17 at 00:39 -0400, Robert Bieber wrote: The problem isn't just occurring in 2008.8, the same happens in FSO and Qtopia. If it were a software issue, it would seem that reflashing would at least have it working as long as it worked in the first place, but I now have no ability to come out of suspend at all, even after flashing the phone (and I've now tried removing the battery for 30 seconds as well). Could it possibly be an issue with uBoot? That's the only piece of software I haven't reflashed yet... William Kenworthy wrote: known software bug - try 2007.2 which doesnt have it. BillK On Sat, 2008-08-16 at 11:41 -0400, Robert Bieber wrote: When OM2008.8 was released, I flashed it to my Freerunner, and suspend and resume worked impeccably for the first couple of days I had it. After that, however, it started going into suspend and refusing to come out, even if called. I reflashed with 2008.8, but the problem persisted. I have since tried multiple reflashes of OM2008.8, FSO Milestone 2, and Qtopia, and none of them will allow the phone to come out of suspend. Given that the problem persists across distributions, it would seem as though there may be an issue with the phone itself. Does anyone else have any experience with this problem? Could there be a software fix, or am I going to have to have the phone replaced? Thank you, Robert Bieber ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- William Kenworthy [EMAIL PROTECTED] Home in Perth! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Re: Re: Suspend/Resume Issue: Possible Hardware Problem?
Will do, the only problem is that I don't know how to suspend/resume in 2007.2. Wasn't it a terminal command, or something to that effect? William Kenworthy wrote: FSO, 2008.8 and to some extent qtopia share a lot of code. Try 2007.2 while you are flashing things. BillK On Sun, 2008-08-17 at 00:39 -0400, Robert Bieber wrote: The problem isn't just occurring in 2008.8, the same happens in FSO and Qtopia. If it were a software issue, it would seem that reflashing would at least have it working as long as it worked in the first place, but I now have no ability to come out of suspend at all, even after flashing the phone (and I've now tried removing the battery for 30 seconds as well). Could it possibly be an issue with uBoot? That's the only piece of software I haven't reflashed yet... William Kenworthy wrote: known software bug - try 2007.2 which doesnt have it. BillK On Sat, 2008-08-16 at 11:41 -0400, Robert Bieber wrote: When OM2008.8 was released, I flashed it to my Freerunner, and suspend and resume worked impeccably for the first couple of days I had it. After that, however, it started going into suspend and refusing to come out, even if called. I reflashed with 2008.8, but the problem persisted. I have since tried multiple reflashes of OM2008.8, FSO Milestone 2, and Qtopia, and none of them will allow the phone to come out of suspend. Given that the problem persists across distributions, it would seem as though there may be an issue with the phone itself. Does anyone else have any experience with this problem? Could there be a software fix, or am I going to have to have the phone replaced? Thank you, Robert Bieber ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
