Re: opkg not going anywhere
On Tuesday 01 July 2008, arne anka wrote: > i think i read somewhere, the wiki probably, that om has no resolv.conf > (god knows, why). thus check if it is true and if yes, create one (simply > by copying the one from your pc). w/o name resolution will not work. I'm not certain if this is true of the preloaded version, but the GTK-based one I made with mokomakefile on the 23rd has resolv.conf pointing to 192.168.0.200 which is the suggested IP for the PC end of the USB connection. You either need this machine to handle DNS requests, or change the resolv.conf to point to one that can. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: opkg not going anywhere
i think i read somewhere, the wiki probably, that om has no resolv.conf (god knows, why). thus check if it is true and if yes, create one (simply by copying the one from your pc). w/o name resolution will not work. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: opkg not going anywhere
Hi, I had the same problem, It seems that neo can resolve domain names then change in the configurations files http://78.47.190.211/daily-feed/all/Packages.gz. You can know if you have the same problem when you try to do ping at buildhost.openmoko.org and don't response, and when you do ping 78.47.190.211 it works. I hope that you can resolve the problem Paola 2008/7/1 Clare <[EMAIL PROTECTED]>: > Hi Eildert > Doing what you did, I get a similar result except I can ping out. > One thing necessary is a nameserver, but also iptables probably. > file /etc/resolv.conf in the Neo or Freerunner whould read > nameserver 192.168.0.200 > and in the PC I run dnsmasq as the nameserver. > My 2nd machine this was not running, but starting it enabled > ping out etc to work. > My ifconfig gives an lo in addition to usb0 > > I did write it all earlier, especially the iptables part at > http://home.exetel.com.au/claregj/Neo1973/WhatIdidToSshNeo > (because it was harder with modem wanting 192.168.2 network.) > > Good luck, you will enjoy it. > > clare > > On Tue, 1 Jul 2008, Eildert Groeneveld wrote: > >> Hi Folks >> now I am trying to install some stuff on the brandnew Freerunner. >> >> Through usb0 and ssh [EMAIL PROTECTED] I am logged into the Neo and want to >> install tangoGPS. However, it seems that the Neo cannot access the internet >> altough the laptop does have full access. >> A opkg update gives: >> >> An error ocurred, return value: 8. >> Collected errors: >> Failed to download http://buildhost.openmoko.org/daily-feed/all/Packages.gz, >> error 0 >> >> also urls cannot be pinged >> [EMAIL PROTECTED]:/var/volatile/tmp# route >> Kernel IP routing table >> Destination Gateway Genmask Flags Metric RefUse Iface >> 192.168.0.0 * 255.255.255.0 U 0 00 usb0 >> default 192.168.0.200 0.0.0.0 UG0 00 usb0 >> [EMAIL PROTECTED]:/var/volatile/tmp# ifconfig >> >> >> usb0 Link encap:Ethernet HWaddr 9A:57:42:23:8D:06 >> inet addr:192.168.0.202 Bcast:192.168.0.255 Mask:255.255.255.0 >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:400 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:261 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:39202 (38.2 KiB) TX bytes:36986 (36.1 KiB) >> >> >> I must be missing something, any ideas what? >> >> greetings >> >> Eildert >> -- >> Eildert Groeneveld >> === >> Institute of Farm Animal Genetics >> Mariensee 31535 Neustadt Germany >> Tel : (+49)(0)5034 871155 Fax : (+49)(0)5034 871239 >> e-mail: [EMAIL PROTECTED] http://vce.tzv.fal.de/index.pl >> http://www.tzv.fal.de/~eg/ http://apiis.tzv.fal.de/index.pl >> === >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: opkg not going anywhere
Hi Eildert Doing what you did, I get a similar result except I can ping out. One thing necessary is a nameserver, but also iptables probably. file /etc/resolv.conf in the Neo or Freerunner whould read nameserver 192.168.0.200 and in the PC I run dnsmasq as the nameserver. My 2nd machine this was not running, but starting it enabled ping out etc to work. My ifconfig gives an lo in addition to usb0 I did write it all earlier, especially the iptables part at http://home.exetel.com.au/claregj/Neo1973/WhatIdidToSshNeo (because it was harder with modem wanting 192.168.2 network.) Good luck, you will enjoy it. clare On Tue, 1 Jul 2008, Eildert Groeneveld wrote: > Hi Folks > now I am trying to install some stuff on the brandnew Freerunner. > > Through usb0 and ssh [EMAIL PROTECTED] I am logged into the Neo and want to > install tangoGPS. However, it seems that the Neo cannot access the internet > altough the laptop does have full access. > A opkg update gives: > > An error ocurred, return value: 8. > Collected errors: > Failed to download http://buildhost.openmoko.org/daily-feed/all/Packages.gz, > error 0 > > also urls cannot be pinged > [EMAIL PROTECTED]:/var/volatile/tmp# route > Kernel IP routing table > Destination Gateway Genmask Flags Metric RefUse Iface > 192.168.0.0 * 255.255.255.0 U 0 00 usb0 > default 192.168.0.200 0.0.0.0 UG0 00 usb0 > [EMAIL PROTECTED]:/var/volatile/tmp# ifconfig > > > usb0 Link encap:Ethernet HWaddr 9A:57:42:23:8D:06 > inet addr:192.168.0.202 Bcast:192.168.0.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:400 errors:0 dropped:0 overruns:0 frame:0 > TX packets:261 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:39202 (38.2 KiB) TX bytes:36986 (36.1 KiB) > > > I must be missing something, any ideas what? > > greetings > > Eildert > -- > Eildert Groeneveld > === > Institute of Farm Animal Genetics > Mariensee 31535 Neustadt Germany > Tel : (+49)(0)5034 871155 Fax : (+49)(0)5034 871239 > e-mail: [EMAIL PROTECTED] http://vce.tzv.fal.de/index.pl > http://www.tzv.fal.de/~eg/ http://apiis.tzv.fal.de/index.pl > === > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: opkg not going anywhere
> I must be missing something, any ideas what? if usb is the means the om is connected to the inet, the host pc needs to be configured to route all request from the om to the inet and back. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: opkg not going anywhere
Hi, --- On Tue, Jul 1, 2008 at 2:38 PM, Eildert Groeneveld <[EMAIL PROTECTED]> wrote: | the Neo cannot access the internet \-- Followed this? http://wiki.openmoko.org/wiki/USB_Networking#Automatic_method SK -- Shakthi Kannan http://www.shakthimaan.com ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
opkg not going anywhere
Hi Folks now I am trying to install some stuff on the brandnew Freerunner. Through usb0 and ssh [EMAIL PROTECTED] I am logged into the Neo and want to install tangoGPS. However, it seems that the Neo cannot access the internet altough the laptop does have full access. A opkg update gives: An error ocurred, return value: 8. Collected errors: Failed to download http://buildhost.openmoko.org/daily-feed/all/Packages.gz, error 0 also urls cannot be pinged [EMAIL PROTECTED]:/var/volatile/tmp# route Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 192.168.0.0 * 255.255.255.0 U 0 00 usb0 default 192.168.0.200 0.0.0.0 UG0 00 usb0 [EMAIL PROTECTED]:/var/volatile/tmp# ifconfig usb0 Link encap:Ethernet HWaddr 9A:57:42:23:8D:06 inet addr:192.168.0.202 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:400 errors:0 dropped:0 overruns:0 frame:0 TX packets:261 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39202 (38.2 KiB) TX bytes:36986 (36.1 KiB) I must be missing something, any ideas what? greetings Eildert -- Eildert Groeneveld === Institute of Farm Animal Genetics Mariensee 31535 Neustadt Germany Tel : (+49)(0)5034 871155 Fax : (+49)(0)5034 871239 e-mail: [EMAIL PROTECTED] http://vce.tzv.fal.de/index.pl http://www.tzv.fal.de/~eg/ http://apiis.tzv.fal.de/index.pl === ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
