[Cooker] [Bug 2011] [drakxtools] New: Pb of network configuration
https://qa.mandrakesoft.com/show_bug.cgi?id=2011 Product: drakxtools Component: DrakConnect Summary: Pb of network configuration Version: 9.1-3mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: critical Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] My computer is part of a LAN. The automatic installation of network does not work: Everything SEEMS to work, no blocking state, but any information that I gave (at least 10 times) was lost. The only way to configure my network was to take the informations from other computer and to put it "by hand" in the configuration files. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 2010] [drakxtools] New: Pb with OfficeJet T45 printer during Mandrake Installation
https://qa.mandrakesoft.com/show_bug.cgi?id=2010
Product: drakxtools
Component: printerdrake
Summary: Pb with OfficeJet T45 printer during Mandrake
Installation
Version: 9.1-3mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
Severity: major
Priority: P2
AssignedTo: [EMAIL PROTECTED]
ReportedBy: [EMAIL PROTECTED]
During installation of Mandrake 9.1 RC1 the autodetection of the OfficeJet T45 printer
causes an endless cycle (panic-ok-detection-panic-ok-detection- ...)
It is first solved by turnnig off the printer (thus: no autodetection).
After everything is installed, the use of printerdrake from the Control Panel of
Mandrake
("Panneau de contrôle de Mandrake" in french) is impossible: only "Veuillez patienter"
is
shown (Please wait!). The only exit is "Cancel".
But the use of printerdrake from a shell works VERY good: nothing was asked, and the
printer was installed in 2 minutes.
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
Re: [Cooker] [Bug 1992] [glibc-utils] New: glibc-utils still requireslibgd1
Yes, you are right. Thanks. @status=assigned
Re: [Cooker] How to rebuild nvidia-kernel for rc1: solved
On Thursday 20 February 2003 23:38, Francisco wrote: > Thanks to Buchan Mine help i did it: > > 1) Of course you need the nvidia-kernel and nvidia-glx src.rpm packages > downloaded from www.nvidia.com. > > 2) You need also to have installed the kernel-sources rpm from the third > cdrom of Mandrake 9.1 rc1 > > 3) You need to set an environmental variable: > > "export IGNORE_CC_MISMATCH=1" > Whilst this works, it was crahsing X when running the Euphoria screen saver with 2.4.210pre4-6mdk (compiled with gcc 3.2.1), but switching to 2.4.210pre4-6mdk (compiled with gcc 3.2.2) X is now fine. So the moral of the story is, do your best to ensure that the NVidia driver IS compiled with the same compiler as the kernel it is being compiled against. > 4) Now rpm --rebuild nvidia-kernel.src.rpm > rpm --rebuild nvidia-GLX. src.rpm > > 5) After the rebuild succes ou will have the rpms on /usr/src/RPM/RPMs/i586 > > > Francisco Alcaraz > Murcia (Spain) -- John Allen, Email: mailto:[EMAIL PROTECTED] MandrakeClub Silver Member.
[Cooker] [Bug 2009] [menudrake] reloading the user config or system menu closes the menudrake window
https://qa.mandrakesoft.com/show_bug.cgi?id=2009 [EMAIL PROTECTED] changed: What|Removed |Added Component|program |menudrake Product|drakxtools |menudrake Version|9.1-3mdk|0.7.2-1mdk --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 07:11 --- This bug was opened for ML 9.1 rc1. The component should be menudrake. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Reloading the user config or system menu under the File menu closes the menudrake window.
[Cooker] Errors at installation
When I started to install Mandrake Linux 9.1 beta 3, the first disk is installed properly, the second CD makes a lot of errors, specially when it is installing the packages for the Open Office, since I have an on board Broadcam Lan card, it does not detected, I isntalled a second Realtek Lan Card in one of the CPI but it does not configure anyone of them and I am unable to go into the internet, I have tried the beta 3 on a Via Kt3 and Via kt4 and still it makes more than 20 errors, If I configure the printer during the installation it will not let me to loginDo you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, and more
[Cooker] [Bug 1116] [kdebase] Odd font sizing on Rage 128 Mobility for konsole fonts
https://qa.mandrakesoft.com/show_bug.cgi?id=1116 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 07:08 --- Looks like post RC1 cooker changes have made things better. Will double check again. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: The terminal opens as a very wide and narrow display at 80x25. Changing the fonts do not seem to make much of a difference in the display. rxvt and gnome terminal displays look properly proportioned
[Cooker] [Bug 2009] [drakxtools] New: reloading the user config or system menu closes the menudrake window
https://qa.mandrakesoft.com/show_bug.cgi?id=2009 Product: drakxtools Component: program Summary: reloading the user config or system menu closes the menudrake window Version: 9.1-3mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Reloading the user config or system menu under the File menu closes the menudrake window. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 2008] [drakxtools] New: reloading the user config or system menu closes the menudrake window
https://qa.mandrakesoft.com/show_bug.cgi?id=2008 Product: drakxtools Component: program Summary: reloading the user config or system menu closes the menudrake window Version: 9.1-3mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Reloading the user config or system menu under the File menu closes the menudrake window. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1646] [drakxtools] Wizard button and instructions are reversed.
https://qa.mandrakesoft.com/show_bug.cgi?id=1646 [EMAIL PROTECTED] changed: What|Removed |Added Priority|P2 |P5 --- Additional Comments From [EMAIL PROTECTED] 2003-02-14 16:20 --- Created an attachment (id=177) --> (https://qa.mandrakesoft.com/attachment.cgi?id=177&action=view) snapshot showing the reversed button and description Image to better explain what I mean. --- Additional Comments From [EMAIL PROTECTED] 2003-02-14 16:21 --- Created an attachment (id=178) --> (https://qa.mandrakesoft.com/attachment.cgi?id=178&action=view) snapshot showing the reversed button and description Image to better explain what I mean. --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 07:05 --- Still present in rc1 --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: The wizard button has moved from the right side of the click here text to the left side. As a result the arrow now points at the edge of the window instead of the button.
[Cooker] [Bug 1576] [icewm] toolbar in current cooker icewm unable to diskplay apm battery status
https://qa.mandrakesoft.com/show_bug.cgi?id=1576 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 07:04 --- problem found with beta3 and still exists --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When APM is working displayed battery status by cooker current is 0:00 regardless. apm -v shows correct status as does gkrellm. If you downgrade to the version in 9.0 batter status returns and is displayed correctly. Installed base 9.1beta3 updated to latest from cooker (as of 11:30 pm PST) computer Compaq Armada M700 Celeron 500mhz 384Mb ram. ATI Mobility VGA XFree86 4.x (current)
Re: [Cooker] Bitstream Vera Fonts Now Available: Is there Anywayto Add them To 9.1?
On Thu, 2003-02-20 at 23:17, Adam Williamson wrote: > Yes, and frankly, they suck. They might not be the best, but they certainly don't suck. And they're certainly better than any other fonts the Linux distributions currently ship. With 9.1 already at the rc1 stage, I highly doubt that the fonts will be released in redistributable form in time for 9.1 final. -- Steve Fox http://k-lug.org
[Cooker] [Bug 2007] [Installation] New: Switching to alternate screens during install crashes X
https://qa.mandrakesoft.com/show_bug.cgi?id=2007 Product: Installation Component: Installation Summary: Switching to alternate screens during install crashes X Version: 1.790 Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] During the install if you switch over to an alternate screen to monitor something, or just to see what is going on, X often crashes... leaving you to have to start the install process all over again. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 2006] [Installation] New: Can't scroll properly in flat mode.
https://qa.mandrakesoft.com/show_bug.cgi?id=2006 Product: Installation Component: Installation Summary: Can't scroll properly in flat mode. Version: 1.790 Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] In order to be able to scroll correctly in flat mode you need to first drill down into the menu structure in grouped mode. Then and only then will the flat mode allow you to scroll through software. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 2005] [Installation] New: In RC1 choosing individual programs in flat mode hangs install
https://qa.mandrakesoft.com/show_bug.cgi?id=2005 Product: Installation Component: Installation Summary: In RC1 choosing individual programs in flat mode hangs install Version: 1.790 Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] If when choosing idividual packages in flat mode a window pops up and says "Ialso need to install" or words to that affect, eventually the program will freeze and the ok or cancel buttons will not work correctly. This happens randomly as far as the package that gives this problem and so far I've had it happen on two machines. (both of whom installed beta3 just fine.) change to f2 etc for additional information I can see on the screen that clicking the ok or the cancel button is recieved (I'll get messages like OK clicked or Cancel Clicked one for each time I click if I care to sit there and click away.) But the window will not go away and at that point even though the box itself is not hung since I can't get rid of the window I can't proceed with the instal. I can duplicate this problem over and over and over without fail. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
Re: [Cooker] unmount of floppy not automatic
On Friday 21 February 2003 03:12 am, guran wrote: > Kformat signed that the drive was still > busy. So I had to unmount as root. See if `sync' is enough next time. Cheers; Leon
[Cooker] [Bug 1259] [Installation] MandrakeLinux-9.1 RC1 Same problem with a twist
https://qa.mandrakesoft.com/show_bug.cgi?id=1259 [EMAIL PROTECTED] changed: What|Removed |Added Summary|Beta 3 Needs Work and |MandrakeLinux-9.1 RC1 Same |Prayers |problem with a twist --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 06:34 --- MandrakeLinux-9.1 RC1 Same problem with a twist. You're getting closer guys but no cigar. The new release when done as an install on the IBM xSeries platform correctly identifies the controller no as a 53c1030 but fails to find a driver. If I tell it I have another SCSI adapter it let me look for a driver and the mptscsi.h is there and I can pick it. It then tries to load and cannot find the drives. I think it is because you do not load the mptbase before or with the mptscsi.h driver. It just cannot see the drives and therefore hangs with no place to load the system. On a side note. When the install is done on workstation it hangs after you put in the users and before you can select you LAN or Video Card or Printer etc. You have to do a CTL ALT BS and shutdown and do a text boot and correct all with drakconf. What a pain. It does work fine when doing an Upgrade though. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Beta 3 Has MANY problems. To be fair for testing, I tried placing Beta 3 on Two different machines. Both machines hardware fully tested. Machine 1 (Server)(New) This machine was done as a fresh install. IBM xSeries 225 Netfinity Server 1-2.4 GB Pentium 4 Processor 1 GB Ram IBM 40x CD-RW HP DVD100i DVD +R CD-RW 1-12GB Eide Harddrive 6-36GB UltraSCSI 18" Viewsonic VX800-2 LCD 2-10/100/1000 NIC First major issue. Like Beta 2 there is no driver for the builtin Fusion MPT SCSI Adapter (mptscsi.h) If you want to do business with IBM and IBM servers you have to include this. Even the IBM website gives you the option of buying the servers without O/S or with Suse 8.1 or RedHat 8.0 who both have the drivers and load and run fine. Mandrake is not listed because of this. The IBM server goes to SCSI hardrive, or floppy, or CD/DVD. Even when I placed a 12 GB EIDE drive on the system and loaded beta2 and beta 3 on the that disk. It will not boot except by floppy. The is the first problem in Beta 3. During the install I was asked exactly once if I wanted a boot disk written and then given a choice of floppy or harddrive. I was never asked again and it does not ask when I reran as an update. That make it completely unusable. You can't boot the systems without major effort. Machine 2 (Workstation) This machine done as a update to 9.0/9.1Beta 2 This machine had 9.0 running on it. It is used to try to convince the state to approve Linux for use on state machines and to service my clusters. I did a straight update to 9.1beta2 with little or no problems and everything worked first time. But, On updating to Beta 3, I no longer get a choice to logon as root. I must log into an unpriviledged account and su to root. That stinks. All USB devices specially USB_Storage is no longer functional even when the modules file is edited. There went my security key and scanner. Many of my command don't work now. I can't even do an lsof -i. Or, use Konqueror or Galeon. Generic 800MB Athlon 512 MB Ram Panasonic LF-D201 DVD +RW Liteon 32x CD-RW Matsui 20x CD 128 MB Flash Drive 18" Cornea CT1700 LCD Summary after first look. This needs major work. Try standing in front of a politician and asking for state approvals when he just watched you just mess up your machine.
Re: [Cooker] [Bug 1876] [kdebase] From kdm if you select reboot,you get a text login, never reboot
On Thu, 2003-02-20 at 08:30, Serge Plüss wrote: > Hi > > still with kdebase -40mdk this 'bug' is happening. Reboot gets you to > the text console and doesn't reboot. Temporary fix... in /usr/share/config/kdm vi kdmrc and change the link to rebootin to point to reboot instead. > > Serge > > > > > > https://qa.mandrakesoft.com/show_bug.cgi?id=1876 > > [EMAIL PROTECTED] changed: > > > What > |Removed > |Added > > > AssignedTo|1580 > |[EMAIL PROTECTED] > > Status|UNCONFIRMED > |RESOLVED > > Resolution| > |FIXED > > > > --- Additional Comments From [EMAIL PROTECTED] 2003-02-20 > 00:40 --- > fixed in -39mdk > > > > > > --- You are receiving this mail because: --- > You are on the CC list for the bug, or are watching someone who is. > > > > --- Reminder: --- > assigned_to: __UNKNOWN__ > status: RESOLVED > creation_date: > description: > When you try to reboot from kdm just X is killed and you get a text > login
Re: [Cooker] How to rebuild nvidia-kernel for rc1
On Thursday 20 February 2003 11:30 pm, [EMAIL PROTECTED] wrote: > I have tryed to rebuild the nvidia-kernel source file, but I have several > error messages. Using a fairly recent Cooker kernel on a 9.0 system worked fine for me, after I had hand-added the symlink between /lib/modules/$(uname -r)/build and /usr/src/linux-$(uname -r) Cheers; Leon
Re: [Cooker] short list of fixes to make rc1 livable
On Thu, 2003-02-20 at 11:17, Adam Williamson wrote: > On Thu, 2003-02-20 at 18:57, tarvid wrote: > > > I don't know of any motherboard/chipset it does work on. I'd pay a bit to have > > the problem go away. > > Works on my laptop, for starters. And your laptop is a ?? *grin*. But you were right earlier about the newer working better than the old. I've found it works well on Dell and not so well on Compaq of the same age laptop wise. James
Re: [Cooker] short list of fixes to make rc1 livable
On Thu, 2003-02-20 at 07:53, tarvid wrote: > Is there a URL with a short list of fixes to make rc1 sufficiently livable to > continue testing. > > I am having a lot of grief and not nearly enough fun to continue as it is. > > For example, > > konq button text is invisible > > cups keep installing every printer on every cups machine in the house > What you don't like to print through 5 machines before you get to the one that has the real printer *grin* > mcc-configure printer hangs, printerdrake runs > > urpmi often produces broken installations, e.g. urpmi xchat fails, rpm -Uvh on > the downloaded file works > > caps lock state on keyboard gets mucked up > > ... > > Jim Tarvid > > >
[Cooker] [Bug 1967] [galaxy-gnome] No way to get the Color Scheme to Match KDE's.
https://qa.mandrakesoft.com/show_bug.cgi?id=1967 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 06:26 --- Rather than close it, push it forward to 9.2. Too much work involved to get it done before 9.1 but eventually a necessary step. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Hi, I noticed that Mandrake Galaxy gtk, while much nicer looking atm than Mandrake Galaxy KDE, does not seem to be able to change colors, at least that I've noticed. The issue being that if I'm using KDE, like many of your users are, I may choose to change the color scheme, which inturn causes GTK stuff to stick out really badly. There is a very easy way to solve this, which is why I am reporting this. libqtpixmap, a derivative of the libpixmap engine employed by most GTK themes, does color matching with KDE's color settings. Now, I'm not sure how Galaxy's theme engine works, but I'm assuming importing the code for this other engine (which is the one used for Geramik, by the way) would be relatively easy. If, on top of that, you made a little tool to adjust the color settings from Gnome, Mandrake would be the FIRST distribution (afaik) to offer both KDE and Gnome users and easy way to keep all major applications using the same color scheme! This would dramatically improve Galaxy and fix a major usability "bug" between KDE and Gnome that has never been solved before right out of the box. Using a static color palate in GTK apps is alright, but the whole unified look is only good so long as no one changes the KDE color scheme. I noted this in my review of Red Hat Linux 8 (at OfB.biz) and marked down the visual apperance somewhat because of that problem. In a way unified widgets giving the appearance of all the applications being the same, will probably confuse users MORE when the color palates won't change all of the applications. It'll probably result in support headaches, I'd suspect. Anyway, libqtpixmap is available for both GTK1 and GTK2. I can't say how much I think this would be a great thing, and everyone who has ever wanted to be able to easily adjust GTK color schemes (probably most Windows migrants) will thank-you for making the change. -Tim
Re: [Cooker] Bitstream Vera Fonts Now Available: Is there Anyway to Add them To 9.1?
On Fri, 2003-02-21 at 01:35, Timothy R. Butler wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> The much hyped Vera Font Family ("Gnome Fonts,") high quality (and Free
> Software compatible) fonts from Bitstream are now available in beta form!
> This means that finally we have access to Bitstream quality fonts that we can
> use to replace Helvetica and other old non-scalable fonts to provide a high
> quality default D.E. :-)
>
> Is there anyway this can be squeezed into Mandrake 9.1? It'd be cool if 9.1
> could premier with the same caliber of fonts as distros like Lindows and
> Lycoris which only have 'em since they are licensing proprietary fonts...
>
> [Note: the beta is not redistributable, but final fonts are due out in
> March... hopefully before Mandrake 9.1 goes final!]
Yes, and frankly, they suck.
Vera Sans looks crappy and amateurish compared to verdana. Serif looks
unprofessional compared to Times New Roman. Sans Monospace is the best
of the bunch, but it's unusable for terminals because it's too tall and
thin. People are used to square characters in terminals. I downloaded
the betas in excitement and went straight back to my Microsoft fonts
five minutes later with considerable disappointment...:\
--
adamw
[Cooker] [Bug 1191] [devfsd] /dev entries remain after USB drive has been unplugged
https://qa.mandrakesoft.com/show_bug.cgi?id=1191 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 06:17 --- This bug still remains. Tonight, I plugged a usb card reader in and a /dev/sda entry was created. After I had unplugged the device, I looked at the logs and saw a message stating that the device had been unplugged. However, the /dev/sda entry still remained. I then tried to run diskdrake, and it obviously believed that the device formerly connected to /dev/sda still was connected as it asked me: "I can't read the partition table of device sda, it's too corrupted for me :( I can try to go on, erasing over bad partitions (ALL DATA will be lost!). The other solution is to not allow DrakX to modify the partition table. (the error is unknown partition table format on disk /dev/sda.) Do you agree to loose all the partitions? [Y/N]" Thierry, if you don't think this is a mistake in devfsd, where do you think it is? In the kernel? In hotplug? Work with me, I gave all the information I could think of in the original bug report: lspci, logs, /proc/bus/usb/devices and a listing of relevant entries in /dev. What more can I do in order to facilitate this problem being solved? --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I have a CD-RW which I sometimes access using a IDE->USB2.0 case enclosure. When I connected it, it was recognized and a /dev/ entry was created. When I disconnected it, the /dev/ entry remained and harddrake2 still displayed the outdated drive information. What I expected: The /dev entries to be removed when I disconnected the device. This is on a fresh cooker install from yesterday. Kernel is 2.4.21.0.pre4.1 Given below: The appropriate lines from the kernel log, /proc/bus/usb/devices, lspvi -v, the /dev listing and the harddrake2 output. # # Here are the log messages from connecting: Feb 1 10:37:01 localhost kernel: hub.c: new USB device 00:02.2-1, assigned address 8 Feb 1 10:37:01 localhost kernel: usb.c: USB device not accepting new address=8 (error=-71) Feb 1 10:37:01 localhost kernel: hub.c: new USB device 00:02.2-1, assigned address 9 Feb 1 10:37:01 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices Feb 1 10:37:03 localhost kernel: Vendor: HPModel: CD-Writer+ 9100 Rev: 1.0c Feb 1 10:37:03 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02 Feb 1 10:37:03 localhost kernel: Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 Feb 1 10:37:03 localhost kernel: sr0: scsi-1 drive Feb 1 10:37:06 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product # # The log message from disconnecting: Feb 1 11:44:57 localhost kernel: usb.c: USB disconnect on device 00:02.2-1 address 9 # # The results from cat /proc/bus/usb/devices with the CD drive connected show that it is indeed registered: T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor= ProdID= Rev= 2.04 S: Manufacturer=Linux 2.4.21pre4-1mdk ehci-hcd S: Product=PCI device 10de:0068 (nVidia Corporation) S: SerialNumber=00:02.2 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0c0b ProdID=b001 Rev=11.10 S: Manufacturer=DMI S: Product=USB 2.0 Storage Adaptor S: SerialNumber=0B02011C04E7EA44 C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor= ProdID= Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=e084 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor= ProdID= Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=e083e000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms # #
[Cooker] [Bug 2004] [drakxtools] New: unabe to connect with a dsl modem
https://qa.mandrakesoft.com/show_bug.cgi?id=2004 Product: drakxtools Component: DrakConnect Summary: unabe to connect with a dsl modem Version: 9.1-3mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: major Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] when installing mandrake 9.1 fresh, or then as an upgrade to mandrake9.0. I am unable to get my dsl modem configured. It works great with 9.0 I assumed when doing an upgrade install my settings would have stayed. Any tips? --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1340] [kdebase] kdelnit coud not launch "kfmclient"
https://qa.mandrakesoft.com/show_bug.cgi?id=1340 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 06:00 --- --- This was discussed on the KDE list, it seems kdinit is launching two instances when clicked. The workaround is to drag a marque (box) sround the icon and then click, pow, single instance and no error message. --- I have this problem, but hadn't worried about as things still opened. I've tried the workaround and it doesn't. Workaround, that is. :^) Regards Trevor Rhodes === Powered by Linux- Mandrake 9.1 beta3 Registered Linux user # 290542 at http://counter.li.org Registered Machine #'s 186951, Source : my 100 % Microsoft-free personal computer. === 15:53:46 up 57 min, 3 users, load average: 1.50, 2.08, 1.69 --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When you try and double click on anything on the desktop the above error is given and then the window will open.
Re: [Cooker] Re: wine-20020219
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 20 February 2003 10:45 pm, John Johnson wrote: > On Thu, 2003-02-20 at 23:40, Jeremy Salch wrote: > > -BEGIN PGP SIGNED MESSAGE- > > Hash: SHA1 > > > > On Thursday 20 February 2003 10:35 pm, John Johnson wrote: > > > On Thu, 2003-02-20 at 22:33, Jeremy Salch wrote: > > > > -BEGIN PGP SIGNED MESSAGE- > > > > Hash: SHA1 > > > > > > > > On Thursday 20 February 2003 06:41 pm, John Johnson wrote: > > > > > On Thu, 2003-02-20 at 17:42, Paul R Streitman wrote: > > > > > > O.K., wine is not TOTALLY broken, only mostly. Some applications > > > > > > (other than notepad, which as someone pointed out is a built-in) > > > > > > do still work. In the case of Lotus Notes (which worked fine > > > > > > before I applied the the Cooker updates from the 12-14th of this > > > > > > month), it does not even get far enough to draw the first frame > > > > > > of the application before dying of an 'XIO' error. My hardware > > > > > > is a Thinkpad with an ATI Mobility Radeon 7500. > > > > > > > > > > > > I also am running an absolutely up-to-date cooker including > > > > > > today's new version of X (although I am using my own higher > > > > > > kernel and I compiled wine myself). > > > > > > > > > > > > > > > > > > Paul z/OS core components development > > > > > > Internet: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > > Adam Williamson > > > > > > <[EMAIL PROTECTED]> To: > > > > > > [EMAIL PROTECTED] Sent by:cc: > > > > > > cooker-owner@linux-mSubject: Re: > > > > > > [Cooker] Re: wine-20020219 andrake.com > > > > > > > > > > > > > > > > > > 02/20/2003 01:02 PM > > > > > > Please respond to > > > > > > cooker > > > > > > > > > > I too have noticed problems with wine since my recent cooker > > > > > updates. In my case, I'm using codeweavers plugins and CXOffice in > > > > > addition to transgaming winex (All current versions). I've only > > > > > gotten CXOffice to run and that's if I manually execute the command > > > > > via a terminal window. Desktop icons don't work at all. > > > > > > > > > > A common error shared by WineX and CX plugins is: > > > > > wine: lstat /home/john/.transgaming/wineserver-johnhost/socket : No > > > > > such file or directory > > > > > > > > > > OR > > > > > > > > > > wine: lstat /home/john/.crossover/wineserver-johnhost/socket : No > > > > > such file or directory > > > > > > > > I have suddenly been getting the same thing with WineX.. and the only > > > > way to get around it is to delete the directory that it says isn't > > > > there.. and once i do that it will load. > > > > > > That solved both my WineX AND crossover plugins problem. > > > > > > Thanks! > > > John > > > > But it will only solve it once.. the next time you try to run it .. > > the message will come back. :( > > Yep..You're right :( I hate it when i'm right. - -- http:[EMAIL PROTECTED] for pgp key -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+VbDPsKWd3vub6wURAp5pAJ4pEG7FEU8IForBwrpV7FfjOUiR1wCfTpf0 jZuWftaHpJt0gPGgjRsXNhk= =Z8SF -END PGP SIGNATURE-
[Cooker] [Bug 2003] [Installation] Update option is not provided in 9.1 RC1 when trying to update a 9.0 system on raid 1
https://qa.mandrakesoft.com/show_bug.cgi?id=2003 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 05:50 --- << IMPORTANT INFORMATION! >> This is an automated message. In order to combat the large amount of spam I recieve the message you sent (attached below) requires confirmation before it can be delivered. To confirm that you sent the message below, just reply to this message leaving the message as is (you don't need to edit anything). Once this is done all further emails from you will be accepted without you needing to send a confirmation. << WICHTIGE INFORMATION >> Dies ist eine automatisch generierte Antwort. Ihre Mail (unten angehaengt) muss vor der Zustellung an mich explizit bestaetigt werden. Um dies zu tun, beantworten Sie einfach diese Mail mit der "Antworten" oder "Reply"-Funktion Ihres Mailprogramms. Es sind keine Aenderungen am Text noetig. Dies ist die einzige Bestaetigung die Sie je an mich senden muessen; Ihre weiteren Nachrichten werden automatisch akzeptiert. Diese Massnahme dient der Bekaempfung von Spam. This email account is protected by: Active Spam Killer (ASK) V2.2 - (C) 2001-2002 by Marco Paganini For more information visit http://www.paganini.net/ask --- Original Message Follows --- To: [EMAIL PROTECTED] Subject: [Bug 2003] [Installation] New: Update option is not provided in 9.1 RC1 when trying to update a 9.0 system on raid 1 Date: Fri, 21 Feb 2003 05:44:06 +0100 (CET) https://qa.mandrakesoft.com/show_bug.cgi?id=2003 Product: Installation Component: Installation Summary: Update option is not provided in 9.1 RC1 when trying to update a 9.0 system on raid 1 Version: 1.790 Platform: Other OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I was not given the option of doing an update from 9.0. My system has all of its partitions as software raid 1 partitions. When the install process got to the partitioning screen it saw all of my partitions, but none of them were a part of a md? device and none of the mount points were known. --- You are receiving this mail because: --- You reported the bug, or are watching the reporter. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I was not given the option of doing an update from 9.0. My system has all of its partitions as software raid 1 partitions. When the install process got to the partitioning screen it saw all of my partitions, but none of them were a part of a md? device and none of the mount points were known.
Re: [Cooker] Re: wine-20020219
On Thu, 2003-02-20 at 23:40, Jeremy Salch wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > On Thursday 20 February 2003 10:35 pm, John Johnson wrote: > > On Thu, 2003-02-20 at 22:33, Jeremy Salch wrote: > > > -BEGIN PGP SIGNED MESSAGE- > > > Hash: SHA1 > > > > > > On Thursday 20 February 2003 06:41 pm, John Johnson wrote: > > > > On Thu, 2003-02-20 at 17:42, Paul R Streitman wrote: > > > > > O.K., wine is not TOTALLY broken, only mostly. Some applications > > > > > (other than notepad, which as someone pointed out is a built-in) do > > > > > still work. In the case of Lotus Notes (which worked fine before I > > > > > applied the the Cooker updates from the 12-14th of this month), it > > > > > does not even get far enough to draw the first frame of the > > > > > application before dying of an 'XIO' error. My hardware is a > > > > > Thinkpad with an ATI Mobility Radeon 7500. > > > > > > > > > > I also am running an absolutely up-to-date cooker including today's > > > > > new version of X (although I am using my own higher kernel and I > > > > > compiled wine myself). > > > > > > > > > > Paul > > > > > z/OS core components development > > > > > Internet: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > Adam Williamson > > > > > <[EMAIL PROTECTED]> To: > > > > > [EMAIL PROTECTED] Sent by:cc: > > > > > cooker-owner@linux-mSubject: Re: > > > > > [Cooker] Re: wine-20020219 andrake.com > > > > > > > > > > > > > > > 02/20/2003 01:02 PM > > > > > Please respond to > > > > > cooker > > > > > > > > I too have noticed problems with wine since my recent cooker updates. > > > > In my case, I'm using codeweavers plugins and CXOffice in addition to > > > > transgaming winex (All current versions). I've only gotten CXOffice to > > > > run and that's if I manually execute the command via a terminal window. > > > > Desktop icons don't work at all. > > > > > > > > A common error shared by WineX and CX plugins is: > > > > wine: lstat /home/john/.transgaming/wineserver-johnhost/socket : No > > > > such file or directory > > > > > > > > OR > > > > > > > > wine: lstat /home/john/.crossover/wineserver-johnhost/socket : No such > > > > file or directory > > > > > > I have suddenly been getting the same thing with WineX.. and the only way > > > to get around it is to delete the directory that it says isn't there.. > > > and once i do that it will load. > > > > That solved both my WineX AND crossover plugins problem. > > > > Thanks! > > John > > > > > But it will only solve it once.. the next time you try to run it .. > the message will come back. :( Yep..You're right :(
[Cooker] [Bug 2003] [Installation] New: Update option is not provided in 9.1 RC1 when trying to update a 9.0 system on raid 1
https://qa.mandrakesoft.com/show_bug.cgi?id=2003 Product: Installation Component: Installation Summary: Update option is not provided in 9.1 RC1 when trying to update a 9.0 system on raid 1 Version: 1.790 Platform: Other OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I was not given the option of doing an update from 9.0. My system has all of its partitions as software raid 1 partitions. When the install process got to the partitioning screen it saw all of my partitions, but none of them were a part of a md? device and none of the mount points were known. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
Re: [Cooker] Re: wine-20020219
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 20 February 2003 10:35 pm, John Johnson wrote: > On Thu, 2003-02-20 at 22:33, Jeremy Salch wrote: > > -BEGIN PGP SIGNED MESSAGE- > > Hash: SHA1 > > > > On Thursday 20 February 2003 06:41 pm, John Johnson wrote: > > > On Thu, 2003-02-20 at 17:42, Paul R Streitman wrote: > > > > O.K., wine is not TOTALLY broken, only mostly. Some applications > > > > (other than notepad, which as someone pointed out is a built-in) do > > > > still work. In the case of Lotus Notes (which worked fine before I > > > > applied the the Cooker updates from the 12-14th of this month), it > > > > does not even get far enough to draw the first frame of the > > > > application before dying of an 'XIO' error. My hardware is a > > > > Thinkpad with an ATI Mobility Radeon 7500. > > > > > > > > I also am running an absolutely up-to-date cooker including today's > > > > new version of X (although I am using my own higher kernel and I > > > > compiled wine myself). > > > > > > > > Paul > > > > z/OS core components development > > > > Internet: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > Adam Williamson > > > > <[EMAIL PROTECTED]> To: > > > > [EMAIL PROTECTED] Sent by:cc: > > > > cooker-owner@linux-mSubject: Re: > > > > [Cooker] Re: wine-20020219 andrake.com > > > > > > > > > > > > 02/20/2003 01:02 PM > > > > Please respond to > > > > cooker > > > > > > I too have noticed problems with wine since my recent cooker updates. > > > In my case, I'm using codeweavers plugins and CXOffice in addition to > > > transgaming winex (All current versions). I've only gotten CXOffice to > > > run and that's if I manually execute the command via a terminal window. > > > Desktop icons don't work at all. > > > > > > A common error shared by WineX and CX plugins is: > > > wine: lstat /home/john/.transgaming/wineserver-johnhost/socket : No > > > such file or directory > > > > > > OR > > > > > > wine: lstat /home/john/.crossover/wineserver-johnhost/socket : No such > > > file or directory > > > > I have suddenly been getting the same thing with WineX.. and the only way > > to get around it is to delete the directory that it says isn't there.. > > and once i do that it will load. > > That solved both my WineX AND crossover plugins problem. > > Thanks! > John But it will only solve it once.. the next time you try to run it .. the message will come back. :( - -- http:[EMAIL PROTECTED] for pgp key -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+Va2psKWd3vub6wURAhXKAJ4+1a2TFwlGvGgX4HiYG61AYah+3gCdFpVc SyoXGb9HgIdcaNOetWcOlrQ= =FQJ7 -END PGP SIGNATURE-
Re: [Cooker] Re: wine-20020219
On Thu, 2003-02-20 at 22:33, Jeremy Salch wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > On Thursday 20 February 2003 06:41 pm, John Johnson wrote: > > On Thu, 2003-02-20 at 17:42, Paul R Streitman wrote: > > > O.K., wine is not TOTALLY broken, only mostly. Some applications (other > > > than notepad, which as someone pointed out is a built-in) do still work. > > > In the case of Lotus Notes (which worked fine before I applied the the > > > Cooker updates from the 12-14th of this month), it does not even get far > > > enough to draw the first frame of the application before dying of an > > > 'XIO' error. My hardware is a Thinkpad with an ATI Mobility Radeon 7500. > > > > > > I also am running an absolutely up-to-date cooker including today's new > > > version of X (although I am using my own higher kernel and I compiled > > > wine myself). > > > > > > Paul > > > z/OS core components development > > > Internet: [EMAIL PROTECTED] > > > > > > > > > > > > Adam Williamson > > > <[EMAIL PROTECTED]> To: > > > [EMAIL PROTECTED] Sent by:cc: > > > cooker-owner@linux-mSubject: Re: [Cooker] > > > Re: wine-20020219 andrake.com > > > > > > > > > 02/20/2003 01:02 PM > > > Please respond to > > > cooker > > > > I too have noticed problems with wine since my recent cooker updates. In > > my case, I'm using codeweavers plugins and CXOffice in addition to > > transgaming winex (All current versions). I've only gotten CXOffice to > > run and that's if I manually execute the command via a terminal window. > > Desktop icons don't work at all. > > > > A common error shared by WineX and CX plugins is: > > wine: lstat /home/john/.transgaming/wineserver-johnhost/socket : No such > > file or directory > > > > OR > > > > wine: lstat /home/john/.crossover/wineserver-johnhost/socket : No such > > file or directory > > I have suddenly been getting the same thing with WineX.. and the only way to get >around it is to delete the directory that it says isn't there.. > and once i do that it will load. > That solved both my WineX AND crossover plugins problem. Thanks! John
[Cooker] [Bug 1728] [XFree86] Client apps die
https://qa.mandrakesoft.com/show_bug.cgi?id=1728 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 05:33 --- I am also experiencing the same problem (current cooker download) not quite sure which package "broke" wine. My wine application fails sooner or later (usually sooner). I have tried running with --debugmsg +relay,+x11 but too much output without showing anything usefull). I did try downloading the XFree86 source RPM and did a rebuild on that, no change. If I run without a window manager (i.e just a startx with an xterm) the app sometimes runs longer. If there any other ideas or suggestions for tracing feel free to append here. Thanks in advance --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: The XFree86-4.3-0.20030210.1mdk has an annoying problem: VMware 3.2 and Wine20030115 crash if not instantly, then very shortly after start on a gui-related operation. With vmware, for ex., simply resizing a window (even without a guest OS running/loaded) causes 98% crash, so does wine. Checked under KDE 3.1, WindowMaker, IceWM and without display manager at all. The X drivers checked: vesa,framebuffer,radeon,savage - all on different computers. Also checked under Xnest 4.3.0 and with ssh-forwarded connection to XFree 4.2.1 - same result. The error message sounds like: XIO: fatal IO error 0 (Success) on X server ":0.0" after 3074 requests (3072 known processed) with 25 events remaining. Probable workaround: Setting colordepth to 8 bits seems to help, at least with vmware, but it's not very practical solution.
[Cooker] [Bug 1340] [kdebase] kdelnit coud not launch "kfmclient"
https://qa.mandrakesoft.com/show_bug.cgi?id=1340 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 05:00 --- On Thursday 20 February 2003 04:42 pm, info wrote: This was discussed on the KDE list, it seems kdinit is launching two instances when clicked. The workaround is to drag a marque (box) sround the icon and then click, pow, single instance and no error message. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When you try and double click on anything on the desktop the above error is given and then the window will open.
Re: [Cooker] Re: wine-20020219
On Thursday 20 February 2003 10:33 pm, Jeremy Salch wrote: > On Thursday 20 February 2003 06:41 pm, John Johnson wrote: > > On Thu, 2003-02-20 at 17:42, Paul R Streitman wrote: > > > O.K., wine is not TOTALLY broken, only mostly. Some applications > > > (other than notepad, which as someone pointed out is a built-in) do > > > still work. In the case of Lotus Notes (which worked fine before I > > > applied the the Cooker updates from the 12-14th of this month), it does > > > not even get far enough to draw the first frame of the application > > > before dying of an 'XIO' error. My hardware is a Thinkpad with an ATI > > > Mobility Radeon 7500. > > > > > > I also am running an absolutely up-to-date cooker including today's new > > > version of X (although I am using my own higher kernel and I compiled > > > wine myself). > > > > > > Paul > > > z/OS core components development > > > Internet: [EMAIL PROTECTED] > > > > > > > > > > > > Adam Williamson > > > <[EMAIL PROTECTED]> To: > > > [EMAIL PROTECTED] Sent by:cc: > > > cooker-owner@linux-mSubject: Re: > > > [Cooker] Re: wine-20020219 andrake.com > > > > > > > > > 02/20/2003 01:02 PM > > > Please respond to > > > cooker > > > > I too have noticed problems with wine since my recent cooker updates. In > > my case, I'm using codeweavers plugins and CXOffice in addition to > > transgaming winex (All current versions). I've only gotten CXOffice to > > run and that's if I manually execute the command via a terminal window. > > Desktop icons don't work at all. > > > > A common error shared by WineX and CX plugins is: > > wine: lstat /home/john/.transgaming/wineserver-johnhost/socket : No such > > file or directory > > > > OR > > > > wine: lstat /home/john/.crossover/wineserver-johnhost/socket : No such > > file or directory > > I have suddenly been getting the same thing with WineX.. and the only way > to get around it is to delete the directory that it says isn't there.. and > once i do that it will load. > > > However in the case of CXOffice, it uses /tmp to create the necessary > > socket. > > > > John the same with crossover plugin 1.2
[Cooker] [Bug 2002] [drakxtools] New: Autologin doesn't login to kde right.
https://qa.mandrakesoft.com/show_bug.cgi?id=2002 Product: drakxtools Component: drakboot Summary: Autologin doesn't login to kde right. Version: 9.1-3mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] When I use drakboot to setup the autologin process to autologin into kde it logs me in as if i started kde from a console with startx. The problem with this is that the logout button only allows the user to logout, not to shutdown and or reboot the machine. Now.. If i set drakeboot not to autologin and i configure mdkkdm and or normal kdm to automatically login the user i want to login, the logout button provides all the options to the user when it is pressed to either logout, reboot , or shutdown. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1962] [drakxtools] Can't/won't install printer
https://qa.mandrakesoft.com/show_bug.cgi?id=1962 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 04:41 --- kernel-doc-2.4.21-0.pre4.1mdk kernel-2.4.21.0.pre4.1mdk-1-1mdk Linux trevor.rhodes.com.au 2.4.21pre4-1mdk #1 Wed Jan 29 20:02:53 CET 2003 i686 unknown unknown GNU/Linux unknown : Advanced Micro Devices|AMD-761 North Bridge unknown : Advanced Micro Devices|AMD-761 CPU to AGP Bridge (AGP 4x) unknown : VIA Technologies|VT82C686 [Apollo Super] unknown : VIA Technologies|VT82C586 IDE [Apollo] usb-uhci: VIA Technologies|VT82C586B USB usb-uhci: VIA Technologies|VT82C586B USB unknown : VIA Technologies|VT82C686 [Apollo Super ACPI] 8139too : Realtek|RTL-8139 snd-cmipci : C-Media Electronics Inc|CM8738 Card:NVIDIA GeForce2 DDR (generic): nVidia Corporation|NV11 (Geforce2 MX) unknown : Unknown|USB UHCI Root Hub [Hub|Root Hub] unknown : Unknown|USB UHCI Root Hub [Hub|Root Hub] T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor= ProdID= Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=dc00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor= ProdID= Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d800 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms Module Size Used byNot tainted lp 6720 0 parport_pc 21672 1 parport23776 1 [lp parport_pc] nls_iso8859-15 3356 1 (autoclean) sg 31180 0 (autoclean) msdos 5356 0 (autoclean) vfat9580 0 (autoclean) fat31832 0 (autoclean) [msdos vfat] isofs 25620 1 (autoclean) zlib_inflate 18468 0 (autoclean) [isofs] udf85152 0 (autoclean) sr_mod 15064 0 (autoclean) floppy 49212 0 (autoclean) snd-seq-midi3648 0 (autoclean) (unused) snd-opl3-synth 9860 0 (autoclean) (unused) snd-seq-instr 4784 0 (autoclean) [snd-opl3-synth] snd-seq-midi-emul 4896 0 (autoclean) [snd-opl3-synth] snd-ainstr-fm 1780 0 (autoclean) [snd-opl3-synth] snd-seq-oss26016 0 (unused) snd-seq-midi-event 3272 0 [snd-seq-midi snd-seq-oss] snd-seq33200 2 [snd-seq-midi snd-opl3-synth snd-seq-instr snd-seq-midi-emul snd-seq-oss snd-seq-midi-event] snd-pcm-oss37220 0 snd-mixer-oss 10936 0 [snd-pcm-oss] snd-cmipci 15532 0 snd-opl3-lib5860 0 [snd-opl3-synth snd-cmipci] snd-hwdep 3744 0 [snd-opl3-lib] snd-pcm56192 0 [snd-pcm-oss snd-cmipci] snd-timer 10056 0 [snd-seq snd-opl3-lib snd-pcm] snd-mpu401-uart 2784 0 [snd-cmipci] snd-rawmidi12672 0 [snd-seq-midi snd-mpu401-uart] snd-seq-device 3868 0 [snd-seq-midi snd-opl3-synth snd-seq-oss snd-seq snd-opl3-lib snd-rawmidi] snd25124 0 [snd-seq-midi snd-opl3-synth snd-seq-instr snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci snd-opl3-lib snd-hwdep snd-pcm snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 3652 0 [snd] nfsd 66800 0 (autoclean) lockd 46864 0 (autoclean) [nfsd] sunrpc 63324 0 (autoclean) [nfsd lockd] af_packet 12968 1 (autoclean) 8139too14824 1 (autoclean) mii 2416 0 (autoclean) [8139too] supermount 14084 2 (autoclean) ide-cd 30560 1 cdrom 26976 0 [sr_mod ide-cd] ide-scsi9488 0 scsi_mod 91028 3 [sg sr_mod ide-scsi] printer 6912 0 (unused) usb-uhci 21772 0 (unused) usbcore58336 1 [printer usb-uhci] rtc 6524 0 (autoclean) ext3 59916 4 jbd38972 4 [ext3] Regards Trevor Rhodes === Powered by Linux- Mandrake 9.1 beta3 Registered Linux user # 290542 at http://counter.li.org Registered Machine #'s 186951, Source : my 100 % Microsoft-free personal computer. === 14:26:02 up 2 days, 12:26,
[Cooker] [Bug 2001] [kernel] New: Segmentation fault
https://qa.mandrakesoft.com/show_bug.cgi?id=2001 Product: kernel Component: libsasl2-plug-ntlm Summary: Segmentation fault Version: 2.4.21-0.pre4.8mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I have been running CompuPic from Photodex on previous versions through 2.4.19-24, the latest update for Mandrake 9.0 Now that I have installed 9.1rc1 for testing purposes CompuPic dies on loading with a segmentation fault. Sorry but there is no core dump nor any other error messages other than the segmentation fault message. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
Re: [Cooker] Re: wine-20020219
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 20 February 2003 06:41 pm, John Johnson wrote: > On Thu, 2003-02-20 at 17:42, Paul R Streitman wrote: > > O.K., wine is not TOTALLY broken, only mostly. Some applications (other > > than notepad, which as someone pointed out is a built-in) do still work. > > In the case of Lotus Notes (which worked fine before I applied the the > > Cooker updates from the 12-14th of this month), it does not even get far > > enough to draw the first frame of the application before dying of an > > 'XIO' error. My hardware is a Thinkpad with an ATI Mobility Radeon 7500. > > > > I also am running an absolutely up-to-date cooker including today's new > > version of X (although I am using my own higher kernel and I compiled > > wine myself). > > > > Paul > > z/OS core components development > > Internet: [EMAIL PROTECTED] > > > > > > > > Adam Williamson > > <[EMAIL PROTECTED]> To: > > [EMAIL PROTECTED] Sent by:cc: > > cooker-owner@linux-mSubject: Re: [Cooker] > > Re: wine-20020219 andrake.com > > > > > > 02/20/2003 01:02 PM > > Please respond to > > cooker > > I too have noticed problems with wine since my recent cooker updates. In > my case, I'm using codeweavers plugins and CXOffice in addition to > transgaming winex (All current versions). I've only gotten CXOffice to > run and that's if I manually execute the command via a terminal window. > Desktop icons don't work at all. > > A common error shared by WineX and CX plugins is: > wine: lstat /home/john/.transgaming/wineserver-johnhost/socket : No such > file or directory > > OR > > wine: lstat /home/john/.crossover/wineserver-johnhost/socket : No such > file or directory I have suddenly been getting the same thing with WineX.. and the only way to get around it is to delete the directory that it says isn't there.. and once i do that it will load. > > However in the case of CXOffice, it uses /tmp to create the necessary > socket. > > John - -- http:[EMAIL PROTECTED] for pgp key -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+VZ37sKWd3vub6wURArREAJ4m5clz27vKSxFkJuZTnR42oEvdeACfXSZu XazyMuQs2aYNndsy3WA1QZ0= =aNmR -END PGP SIGNATURE-
[Cooker] [Bug 1999] [Installation] New: hptraid not found
https://qa.mandrakesoft.com/show_bug.cgi?id=1999 Product: Installation Component: stage1 Summary: hptraid not found Version: 1.790 Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] 9.1-rc1 I have Adaptec 1200A IDE RAID (HPT366 is found by the installation program). Installation 1st stage indicates in a log file, that hptraid is not found. Installation proceeds, but in a RAID 1 two drives are seen separately (hde and hdg) instead of being seen as one raid drive. I've tried different images, but could not achieve a positive result. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 2000] [Installation] New: hptraid not found
https://qa.mandrakesoft.com/show_bug.cgi?id=2000 Product: Installation Component: stage1 Summary: hptraid not found Version: 1.790 Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I have Adaptec 1200A IDE RAID (HPT366 is found by the installation program). Installation 1st stage indicates in a log file, that hptraid is not found. Installation proceeds, but in a RAID 1 two drives are seen separately (hde and hdg) instead of being seen as one raid drive. I've tried different images, but could not achieve a positive result. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1998] [Installation] Mouse gets stuck in upper right corner after testing X
https://qa.mandrakesoft.com/show_bug.cgi?id=1998 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 04:19 --- Created an attachment (id=208) --> (https://qa.mandrakesoft.com/attachment.cgi?id=208&action=view) Report.bug created right after problem was encountered --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: This is using cooker to do a NFS upgrade to a laptop. During the summary stage, I was configuring the monitor and resolution. Testing my choices worked correctly. When it dropped me back to the summary, the mouse was stuck in the upper right corner of the screen. If I moved it, it would jump back to the corner. Report.bug to follow.
[Cooker] [Bug 1998] [Installation] New: Mouse gets stuck in upper right corner after testing X
https://qa.mandrakesoft.com/show_bug.cgi?id=1998 Product: Installation Component: X Summary: Mouse gets stuck in upper right corner after testing X Version: 1.790 Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] This is using cooker to do a NFS upgrade to a laptop. During the summary stage, I was configuring the monitor and resolution. Testing my choices worked correctly. When it dropped me back to the summary, the mouse was stuck in the upper right corner of the screen. If I moved it, it would jump back to the corner. Report.bug to follow. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
Re: [Cooker] [Bug 1993] [lftp] New: lftp needs rebuild for new openssl
rrowan <[EMAIL PROTECTED]> writes: > https://qa.mandrakesoft.com/show_bug.cgi?id=1993 > >Product: lftp > Component: documentation >Summary: lftp needs rebuild for new openssl >Version: 2.6.4-1mdk > Platform: PC > OS/Version: All > Status: UNCONFIRMED > Severity: normal > Priority: P2 > AssignedTo: [EMAIL PROTECTED] > ReportedBy: [EMAIL PROTECTED] > > > lftp needs rebuild for new openssl rebuilt @resolution=fixed
Re: [Cooker] [Bug 1993] [lftp] New: lftp needs rebuild for new openssl
rrowan <[EMAIL PROTECTED]> writes: > https://qa.mandrakesoft.com/show_bug.cgi?id=1993 > >Product: lftp > Component: documentation >Summary: lftp needs rebuild for new openssl >Version: 2.6.4-1mdk > Platform: PC > OS/Version: All > Status: UNCONFIRMED > Severity: normal > Priority: P2 > AssignedTo: [EMAIL PROTECTED] > ReportedBy: [EMAIL PROTECTED] > > > lftp needs rebuild for new openssl > > > > --- You are receiving this mail because: --- > You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1997] [Installation] No RAID support on "rescue" mode
https://qa.mandrakesoft.com/show_bug.cgi?id=1997 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 03:30 --- FYI. On MDK 9.1 RC1. "rescue mode" calling modprobe md throws an error --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I've all my Filesistems on RAID 1. Also root filesystem. A mistake on /etc/fstab manipulation makes the system unbootable. I've tried to use "install rescue mode" to edit the /etc/fstab and resolve the problem, but RAID devices are not supported on rescue mode.
[Cooker] [Bug 1951] [XFree86-server] Geforce 4 driver does not work
https://qa.mandrakesoft.com/show_bug.cgi?id=1951 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 03:25 --- I'm not sure I understand this problem. I'm running right now, after installing RC1, on the Xfree Gforce 4 driver. Things seem to work fine. I will install the Nvidia driver in a few minures, but I wondered if something had broken since the last time I used it. I have a Gforce 4 Ti4200, so my setup should be comperable. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: 9.1 rc1 video card: geforce 4 Ti4200 I have tried all the geforce suggestions given in the mandrake control centre and the only one that vaguely works is fbdev. All the rest gave varying amounts of corruption problems. I finally gave up and installed nvidia's own drivers. Sorry if this is vauge and is seemingly useless informatioin but I feel it's important to share this in order to illustrate what a user would experience if 9.1 is released with nothing done to avoid the geforce4 problems illustrated in rc1.
[Cooker] [Bug 1962] [drakxtools] Can't/won't install printer
https://qa.mandrakesoft.com/show_bug.cgi?id=1962
[EMAIL PROTECTED] changed:
What|Removed |Added
CC||[EMAIL PROTECTED]
--- Additional Comments From [EMAIL PROTECTED] 2003-02-21 03:25 ---
The problem of printerdrake not starting out of MCC is already fixed on the Cooker.
For me it looks like an incompatibility between kernel and motherboard chipset
(perhaps bug in kernel or hardware) which leads to the parallel or USB printer
not being recognized.
So please provide us info which kernel package you have exactly installed ("rpm
-qa | grep kernel" and "uname -a") which motherboard chipset do you have, output
of "lspcidrake", output of "cat /proc/bus/usb/devices" (for USB printers), which
kernel modules are loaded ("lsmod").
If your printer worked in Mandrake 8.2 or 9.0, install the kernel from that
Mandrake version and try to set up your printer again. Please tell whether this
helps.
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--- Reminder: ---
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
While trying to install HP948c printer I get the following:
rmmod: module parport_probe is not loaded
modprobe: Can't locate module parport_probe
modprobe: Can't locate module parport_probe
rmmod: module parport_probe is not loaded
[Cooker] [Bug 1997] [Installation] New: No RAID support on "rescue" mode
https://qa.mandrakesoft.com/show_bug.cgi?id=1997 Product: Installation Component: stage1 Summary: No RAID support on "rescue" mode Version: 1.790 Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I've all my Filesistems on RAID 1. Also root filesystem. A mistake on /etc/fstab manipulation makes the system unbootable. I've tried to use "install rescue mode" to edit the /etc/fstab and resolve the problem, but RAID devices are not supported on rescue mode. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1996] [ethereal] New: hangs after capturing and column widths broken
https://qa.mandrakesoft.com/show_bug.cgi?id=1996 Product: ethereal Component: ethereal Summary: hangs after capturing and column widths broken Version: 0.9.9-1mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: blocker Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] The latest ethereal hangs after I choose Capture->Start (start capturing) Capture->Stop. The process is hung (or in a loop or something) tight enough that the UI does not even refresh. When capturing, the column widths of all but the rightmost column shrink down to the width of one or so characters and are not resizable. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] Bitstream Vera Fonts Now Available: Is there Anyway to Add them To 9.1?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
The much hyped Vera Font Family ("Gnome Fonts,") high quality (and Free
Software compatible) fonts from Bitstream are now available in beta form!
This means that finally we have access to Bitstream quality fonts that we can
use to replace Helvetica and other old non-scalable fonts to provide a high
quality default D.E. :-)
Is there anyway this can be squeezed into Mandrake 9.1? It'd be cool if 9.1
could premier with the same caliber of fonts as distros like Lindows and
Lycoris which only have 'em since they are licensing proprietary fonts...
[Note: the beta is not redistributable, but final fonts are due out in
March... hopefully before Mandrake 9.1 goes final!]
http://www.bitstream.com/categories/products/fonts/vera/
BETA VERSION --> http://www.gnome.org/fonts/
-Tim
- --
-
Timothy R. Butler[EMAIL PROTECTED]
Universal Networks http://www.uninet.info
Christian Portal and Search Tool: http://www.faithtree.com
Enterprise Open Source Journal: http://www.ofb.biz
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.0.7 (GNU/Linux)
iD8DBQE+VYJhK37Cns9gJ0gRAsFoAKCA1J9uTs2fCL+t94OVd8MjHZjNewCfb/Xe
GGdg363rpFLsLh9CL1no5CU=
=gHjQ
-END PGP SIGNATURE-
[Cooker] [Bug 1995] [xsoldier] New: xsoldier xpms in strange location
https://qa.mandrakesoft.com/show_bug.cgi?id=1995 Product: xsoldier Component: packaging Summary: xsoldier xpms in strange location Version: 1.3-1mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] /usr/share/games/games/xsoldier/ --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1994] [kernel] New: Default Kernel freezes during boot for Toshiba 2435-s255 laptops
https://qa.mandrakesoft.com/show_bug.cgi?id=1994 Product: kernel Component: booting Summary: Default Kernel freezes during boot for Toshiba 2435- s255 laptops Version: 2.4.21-0.pre4.8mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: blocker Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I recently got a toshiba 2436-s255 laptop. When I put a mandrake CD in it displays the page asking me " for more options and to install or upgrade" If I hit enter my screen will go black and freeze. I've tried and many different kernel options ... with the 2.4 kernels nothing works I still get a freeze. Using a 2.2 kernel allows me to proceed, I can install a base system but then the 2.4 kernels that come with the system will not start my system up. I have gotten this system to work with 2.4 kernels, I just had to build it myself... this is very difficult when you don't have a rescue CD or anything that can boot the machine. I had the same problem with Mandrake 9.0. I'll refer you to a post discussing the problem on the toshiba-linux support list: http://linux.toshiba-dme.co.jp/ML/tlinux-users/3100/3114.html --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1993] [lftp] New: lftp needs rebuild for new openssl
https://qa.mandrakesoft.com/show_bug.cgi?id=1993 Product: lftp Component: documentation Summary: lftp needs rebuild for new openssl Version: 2.6.4-1mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] lftp needs rebuild for new openssl --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1992] [glibc-utils] New: glibc-utils still requires libgd1
https://qa.mandrakesoft.com/show_bug.cgi?id=1992 Product: glibc-utils Component: documentation Summary: glibc-utils still requires libgd1 Version: 2.3.1-10mdk Platform: Other OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] hasn't libgd1 been removed from the cooker? --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1962] [drakxtools] Can't/won't install printer
https://qa.mandrakesoft.com/show_bug.cgi?id=1962 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 02:30 --- It did not find my printer on install. It found nothing. If I now go into MCC and click on hardware and then on printer I get your throbbing little printer icon and that's all. It just keeps on pulsing/throbbing. So not I open a terminal, su to root, and type printerdrake. That gives me the following with a popup telling me it's installing something. TODO: XSetInputFocus if force_focus TODO: ensure focus stuff TODO: XSetInputFocus if force_focus TODO: ensure focus stuff TODO: XSetInputFocus if force_focus TODO: ensure focus stuff TODO: XSetInputFocus if force_focus TODO: ensure focus stuff everything already installed cupsd (pid 1312) is running... TODO: XSetInputFocus if force_focus TODO: ensure focus stuff TODO: XSetInputFocus if force_focus TODO: ensure focus stuff Then I try 'Add New Printer' with all three radio button selected. All it finds is the Canon on the print server/router/firewall. So I now do a manual setup and select the HP 948c. Standard Test Page. Didn't print. Tell it it's a local printer, but I get 'no printer found'. I take this printer back to a 9.0 machine and it's found properly. Yes, it didn't find it on install. No. No. I tried all steps, but nothing, nada, zip and zilch. No. Regards Trevor Rhodes === Powered by Linux- Mandrake 9.1 beta3 Registered Linux user # 290542 at http://counter.li.org Registered Machine #'s 186951, Source : my 100 % Microsoft-free personal computer. === 11:54:54 up 2 days, 9:55, 3 users, load average: 1.72, 1.29, 1.11 --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: While trying to install HP948c printer I get the following: rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded
[Cooker] [Bug 1885] [galaxy-kde] galaxy-kde hardcodes colors..
https://qa.mandrakesoft.com/show_bug.cgi?id=1885
[EMAIL PROTECTED] changed:
What|Removed |Added
CC||[EMAIL PROTECTED]
--- Additional Comments From [EMAIL PROTECTED] 2003-02-21 02:22 ---
*** Bug 1966 has been marked as a duplicate of this bug. ***
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--- Reminder: ---
assigned_to: [EMAIL PROTECTED]
status: NEW
creation_date:
description:
Galaxy-KDE hardcodes* a large number of colors, which means it doesn't work right with
many
colorschemes. Please fix it to use the colors from the QColorGroup's/QPalette.
In this present shape, this present a significant regression in functionality vs. the
default
KDE3.x looks.
*plus it does that highly suboptimally - QColor("#AABBCC") is magnitudes slower than
QColor(0xAA,0xBB,0xCC) as it involves a heap allocation/free and lots of parsing
[Cooker] [Bug 1966] [galaxy-kde] galaxy-kde does not properly adhear to KDE color schemes
https://qa.mandrakesoft.com/show_bug.cgi?id=1966 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 02:22 --- *** This bug has been marked as a duplicate of 1885 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Hi, I was playing with the new galaxy-kde, and I noticed something that makes it look really bad if one chooses a dark color scheme: the "shadows"/outline don't follow the KDE shadow colors, but always stays grey. To demonstrate this, switch the KDE color scheme to something dark in mandrake galaxy, such as "Blue Slate." Now, try the same thing with another widget style such as Hi Color or Keramik. I'm sure this wasn't intentional, so I thought I would let you know.
[Cooker] [Bug 1991] [Installation] New: installation doesn't add another version of linux to list
https://qa.mandrakesoft.com/show_bug.cgi?id=1991 Product: Installation Component: Installation Summary: installation doesn't add another version of linux to list Version: 1.790 Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I installed Mandrake 9.1RC3 to /dev/hdb (this is the only thing on this disk). I have an installation of SuSE on hda along with windows98. The install program recognized and configured lilo for the win98 partition, but did not recognize the linux partitions on hda. SuSE uses GRUB as the boot loader and it was in place when I installed Mandrake. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1670] [drakxtools] No way to add boot entries
https://qa.mandrakesoft.com/show_bug.cgi?id=1670 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 02:19 --- Thanks for looking into this Buchan! I hope there is a fairly simple way to fix this annoying issue. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I guess this isn't exactly a bug, but I was wondering why, since you have a nice GUI for adding entries to LILO during setup, there is no way to do so using Drakeboot after setup? Sometimes I'll realize after I've finished that I need to add an entry, and while I don't mind going into lilo.conf to do so, that would stump many people. As long as you already have the code, why not make it work even when you using drakeboot via MCC?
[Cooker] [Bug 1990] [drakxtools] New: printdrake hangs
https://qa.mandrakesoft.com/show_bug.cgi?id=1990 Product: drakxtools Component: printerdrake Summary: printdrake hangs Version: 9.1-3mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: major Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I brought up printdrake from the mandrake control center to add a networked printer through cups and printdrake never returns. There is no printer attached locally to this machine. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] KDE Help Index does not work
Hello, I submitted an email to the cooker mailing list back in January on this subject and unfortunately I got no replys, but I feel it's important enough to bring up again before 9.1 is shipped. The problem is that KDE has not been configured to allow searching of the help files by default, and attempting to set it up manually from the KDE control center on the Help Index applet does not work. I have installed htdig and set the paths accordingly, but the Build Index button still doesn't seem to do anything. Being as Mandrake linux has been refined in numerous places to be easy to use for first time linux users, I feel that being able to search the help files in KDE would only help mandrake. -Elliott Martin
Re: [Cooker] Re: wine-20020219
On Thu, 2003-02-20 at 17:42, Paul R Streitman wrote: > > > > O.K., wine is not TOTALLY broken, only mostly. Some applications (other > than notepad, which as someone pointed out is a built-in) do still work. > In the case of Lotus Notes (which worked fine before I applied the the > Cooker updates from the 12-14th of this month), it does not even get far > enough to draw the first frame of the application before dying of an 'XIO' > error. My hardware is a Thinkpad with an ATI Mobility Radeon 7500. > > I also am running an absolutely up-to-date cooker including today's new > version of X (although I am using my own higher kernel and I compiled wine > myself). > > Paul > z/OS core components development > Internet: [EMAIL PROTECTED] > > > > > Adam Williamson > > <[EMAIL PROTECTED]> To: >[EMAIL PROTECTED] > Sent by:cc: > > cooker-owner@linux-mSubject: Re: [Cooker] Re: >wine-20020219 > andrake.com > > > > > > 02/20/2003 01:02 PM > > Please respond to > > cooker > > > > > > > > > I too have noticed problems with wine since my recent cooker updates. In my case, I'm using codeweavers plugins and CXOffice in addition to transgaming winex (All current versions). I've only gotten CXOffice to run and that's if I manually execute the command via a terminal window. Desktop icons don't work at all. A common error shared by WineX and CX plugins is: wine: lstat /home/john/.transgaming/wineserver-johnhost/socket : No such file or directory OR wine: lstat /home/john/.crossover/wineserver-johnhost/socket : No such file or directory However in the case of CXOffice, it uses /tmp to create the necessary socket. John
Re: [Cooker] Issues With Galaxy-gnome (From Bug Report #1967)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 > Optimally not the Geramik pixmap theme though. > > The QtCurve theme is more inline with what the Galaxy theme is all about. > Take a look at this: Right. I wasn't thinking Geramik so much any more (although I still like the idea of including Geramik) as much as using Geramik's concept of color matching with Mandrake's galaxy theme. -Tim - -- - Timothy R. Butler[EMAIL PROTECTED] Universal Networks http://www.uninet.info Christian Portal and Search Tool: http://www.faithtree.com Enterprise Open Source Journal: http://www.ofb.biz -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+VWoFK37Cns9gJ0gRAqaBAJ9YXvjSWRxXicLIlC+oq097zt6W6QCfZtGz qy+3sJISYrJUjhM3nbl8dbw= =eeJe -END PGP SIGNATURE-
[Cooker] [Bug 1875] [drakxtools] hp deskjet 712c not supported in Mandrake 9.1RC1
https://qa.mandrakesoft.com/show_bug.cgi?id=1875 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 01:24 --- Can you check whether you have enough free disk space with df -k It can be that there was not enough space for a temporary file and so it got incompletely written. Can you also uninstall all foomatic packages with rpm -e --nodeps foomatic-db foomatic-filters foomatic-db-engine Then re-install the packages with urpmi foomatic-db foomatic-filters foomatic-db-engine This fixes broken files in the Foomatic database. I have checked on my test box, there are the same packages and printerdrake sets up a queue for a DeskJet 712C without problems for me. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I installed Mandrake 9.1RC1 and could not print. The HP Deskjet 712c was not supported with the CUPS driver. It appears that pnm2ppa is needed for printing to this printer but the software is not part of the distribution. The following links point to some info: http://www.linuxprinting.org/printer_list.cgi?make=HP http://www.linuxprinting.org/show_printer.cgi?recnum=71232 When using Mandrake 9.0, I was able to configure this printer during the installation. Thanks!
[Cooker] libexpat.so missed for xserver
Hi I have two cooker one in swedish and one in English and in both I have no x-server. This is from .xsession-errors: startkde: Starting up... ksplash: error while loading shared libraries: libexpat.so.0: cannot open shared object file: No such file or directory kdeinit: error while loading shared libraries: libexpat.so.0: cannot open shared object file: No such file or directory startkde: Could not start kdeinit. Check your installation. /usr/bin/startkde: line 214: xmessage: command not found Warning: connect() failed: : No such file or directory ksmserver: error while loading shared libraries: libexpat.so.0: cannot open shar ed object file: No such file or directory startkde: Shutting down... Warning: connect() failed: : No such file or directory Error: Can't contact kdeinit! startkde: Running shutdown scripts... kde-config: error while loading shared libraries: libexpat.so.0: cannot open sha red object file: No such file or directory startkde: Done. regards guran -- Mandrake Linux 9.0 kernel-2.4.19.24mdk-1-1mdk
Re: [Cooker] startx starts in IceWM
On Thursday 20 February 2003 06:01 pm, Chmouel Boudjnah wrote: > guran <[EMAIL PROTECTED]> writes: > > Hi > > > > Mandrake Linux Cooker-i586 20030219 19:35 > > ChangeLog/1.788/Wed Feb 19 14:25:22 2003// > > > > First time in IceWM but after installing Xtart and asking for KDE, startx > > always got into KDE. > > do you have kde installed ? > > what chksession -l say ? Sorry, I didn't see your response, because I have two cooker one in swedish and one in English, and one isn't always visited after install. Yes, I had KDE installed but I have not seen it since those two times, when I reported. regards guran -- Mandrake Linux 9.0 kernel-2.4.19.24mdk-1-1mdk
Re: [Cooker] [Bug 1179] [kdebase] Mandrake's new "kdm" is welcomed with extreme displeasure
On Thursday 20 February 2003 05:38 pm, Buchan Milne wrote: > On Thu, 20 Feb 2003, et wrote: > > well then I believe it is also the same the first time you start > > X-CD-Roast from the menu, (Kmenu. Application, Archiving, CD Burning, > > x-cd-roast) and it gives no clue as to any other way to start xcdroast > > other than an error box with an OK button that says "No root > > configuration or not readable! The superuser must start and configure > > X-CD-Roast first, before other users can use it. > > Ahhh, thanks for reminding me why I don't use X-CDRoast ;-). Great answer,,, I think I will file that one away and use it later > > I contend the in the past, a newbie could (and would) log out, login as > > root > > Ok, so someone needs to add a menu option for running X-CD-Roast setup via > kdesu (or consolehelper or whatever). and someone else can (spend the rest of their life to) make sure no one ever writes another program that "needs" to be run as root that someone might want to run on a Mandrake OS that has mdkkdm? > > > I am not a customer, I have not paid money for Crossover. Money usually > > > speaks better than words, and if for example there is not Mandrake > > > kernel for win4lin (which I have paid for), you can be sure I will > > > write to NeTraverse. > > > > > > , and since I bought it as part of a > > > AFAIK you only get an evaluation copy of Crossover on the Powerpack, > > > but see below ... > > > > yep that is correct, so the only folks that _sold_ me any software was > > the folks I gave money to for the powerpack. > > But they probably did not sell you Crossover ... they sold you StarOffice, > and happened to bundle an eval (slight difference). Really? what I _thought_ I was buying was the Mandrake PowerPAck. if it came with Star Office, or joe's Office pack, I thought I was buying whatever was packed in the powerpack. I was not considering a purchase from Sun, I could sware it was the MAndrakeStore that charged my credit card. I (personally) do not need or use crossover, but that is just me. I just clicked around on the menus and came up with 2 programs that I think most newbies would start by loging out as user and login as root and run. > > > If it is a Mandrake package, mail the packager listed in the changelog > > > (it would be nice to have commercial RPMS also available in Bugzilla). > > > > > > But I still do not see how this is an mdkkdm bug. > > > > well the change in mdkkdm (not having a text box for user name) is what > > made these other programs have a problem. In relatioon to a a new users > > eyes, they were not broken until mdkkdm fixed them. > > Well, I would prefer better options than X-CD-Roast. k3b seems mostly good > enough, and it has been patched not to do stupid things on first start. > > > > What about msec, which would also prevent you from logging in > > > as root? Maybe you should file a bug there too??. > > > > Msec did do what we are talking about (previously), it just depended on > > the level of security chosen. as I understand it (and please correct me > > if I am mistaken) currently there is no way to type in a user name (root) > > if it is not one of the displayed names (and a screenshot might be a good > > thing for trolls like myself to get a clearer picture) perhaps this to > > (the current complaint as I understand it) is a function of the level of > > msec security chosen? > > Yes, I think in level 4 you will not get a user list. We have > allow_user_list(0) > in our /etc/security/msec/levels.local (IIRC), and so we never see a user > list, just a user/passwd dialog, even with mdkkdm. > > Buchan
[Cooker] [Bug 1989] [drakxtools] New: Mysql start stop not correctly setup by drakxservices
https://qa.mandrakesoft.com/show_bug.cgi?id=1989 Product: drakxtools Component: drakxservices Summary: Mysql start stop not correctly setup by drakxservices Version: 9.1-2mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Mysql does not start at bootime in runlevel 3 or 5 due to an bug in drakxservices. Drakxservices sets up a link(K..mysql) in the appropriate runlevels when marked to be started at boottime, but it is supposed to setup a link (S..mysql) which is the correct one to have a service started(S means start K means stop) If you uncheck mysql in drakxservices, then it completely removes the link instead of setting up the link as K..mysql. This error has already been in LM 9.0 and still exists in 9.1 RC1 and cooker version. I guess the error results from the fact, that chkconfig --list returns mysql as the last element and the perlscript that uses this list for drakxservices must handle the last entry(mysql) somehow wrong. The script is pretty long and I'm not familiar with it, so I don't think I would be able to findout the error within a reasonable time. Please check this. Linux-phased, MandrakeSoft Supportteam --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1650] [gnome-control-center] Gnome keyboard shortcuts fails to launch
https://qa.mandrakesoft.com/show_bug.cgi?id=1650 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 00:48 --- Upgraded to RC1. Now works for me. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Trying to map keys on my Omnibook xe4500 by launching the keyboard shortcuts in the gnome-control-panel. The program shows in the bottom panel but fails to launch. The accessability and properties programs launch fine. Tried launching from terminal, no output.
[Cooker] Re: rpmdrake 100%cpu: an observation
Danny Tholen <[EMAIL PROTECTED]> writes: > I noticed something about this bug that I think did not get noticed yet (I do > not know if you already know what goes wrong gc, so perhaps this is not of > use): No not yet.. I had to fix a bug in the pot files generations first :(. > rpmdrakes _only_ hangs when the dependencies it tries to resolve are not > actually visible in the window. > My dirty guess is that when tries to put these small 'v' symbols to mark that > these packages will also get installed, that something is screwed up when it > cannot put the v on the visible screen, and it ends up in a endless loop. Aah that's very interesting. Many thanks for pointing that! > The work around is: buy a huge monitor and maximize your window. This way, all > rpms will be in view and things will go ok. :). Let's hope it's not a gtk-2 bug, i think an rpmdrake or gtk2-perl one would be easier for me to fix :/. I hope I can fix it tomorrow. Thanks again for the info! -- Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
[Cooker] [Bug 1788] [alsamixergui] Error message: function snd_clt_open failed for default
https://qa.mandrakesoft.com/show_bug.cgi?id=1788 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 00:45 --- Upgraded to RC1. This is still an issue. When going into the services of MCC, it shows that the alsa driver is check to launch on startup but is not running. Click the start button and message: driver is not running pops up. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When opening alsamixergui get Error message: function snd_clt_open failed for default. Need help in troubleshooting to deterime if it's a bug and how to characterize issue.
[Cooker] [Bug 1233] [rpmdrake] German localization is incomplete
https://qa.mandrakesoft.com/show_bug.cgi?id=1233 [EMAIL PROTECTED] changed: What|Removed |Added Status|ASSIGNED|RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 00:43 --- fixed in CVS; fix will appear in rpmdrake 2.1-7mdk --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: After installing Mandrake 9.1 beta2 and starting rpmdrake the first time I get a dialog with German text and beneath the line "Is it ok to continue?". This needs to read "Weitermachen?".
[Cooker] rpmdrake 100%cpu: an observation
I noticed something about this bug that I think did not get noticed yet (I do not know if you already know what goes wrong gc, so perhaps this is not of use): rpmdrakes _only_ hangs when the dependencies it tries to resolve are not actually visible in the window. My dirty guess is that when tries to put these small 'v' symbols to mark that these packages will also get installed, that something is screwed up when it cannot put the v on the visible screen, and it ends up in a endless loop. The work around is: buy a huge monitor and maximize your window. This way, all rpms will be in view and things will go ok. Danny
[Cooker] [Bug 1340] [kdebase] kdelnit coud not launch "kfmclient"
https://qa.mandrakesoft.com/show_bug.cgi?id=1340 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 00:42 --- I also have this problem in 9.1RC. Any icon on the desktop which opens Konqueror causes this message, although it appears to cause no problems. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When you try and double click on anything on the desktop the above error is given and then the window will open.
[Cooker] How to rebuild nvidia-kernel for rc1: solved
Thanks to Buchan Mine help i did it: 1) Of course you need the nvidia-kernel and nvidia-glx src.rpm packages downloaded from www.nvidia.com. 2) You need also to have installed the kernel-sources rpm from the third cdrom of Mandrake 9.1 rc1 3) You need to set an environmental variable: "export IGNORE_CC_MISMATCH=1" 4) Now rpm --rebuild nvidia-kernel.src.rpm rpm --rebuild nvidia-GLX. src.rpm 5) After the rebuild succes ou will have the rpms on /usr/src/RPM/RPMs/i586 Francisco Alcaraz Murcia (Spain)
Re: [Cooker] How to rebuild nvidia-kernel for rc1
Paul As I say in other message, I finally get it. Thanks so much for your interest Francisco Alcaraz Murcia (Spain)
[Cooker] [Bug 1988] [Installation] New: Upgrade path did not upgrade kernel
https://qa.mandrakesoft.com/show_bug.cgi?id=1988 Product: Installation Component: isolinux Summary: Upgrade path did not upgrade kernel Version: 1.789 Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Using the network.img, I downloaded the RC1 version of MDK and used the "Upgrade" path. This did not upgrade the kernel. However, there was a lilo entry for the new kernel, so I am using that and defaulting to that entry. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1875] [drakxtools] hp deskjet 712c not supported in Mandrake 9.1RC1
https://qa.mandrakesoft.com/show_bug.cgi?id=1875 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 00:30 --- The printer is still not working. It looks like there may be two issues. 1. The parallel port reported a problem. 2. The pnm2ppa script reported an error. I removed the hp712c printer and then added is using printdrake. Below are the rpms used for printer and foomatice. Also, the error messages reported by printdrake. foomatic-db-3.0-0.beta1.20030213.1mdk.i586.rpm foomatic-db-engine-3.0-0.beta1.20030213.1mdk.i586.rpm foomatic-filters-3.0-0.beta1.20030213.1mdk.i586.rpm printer-filters-1.0-94mdk.i586.rpm printer-testpages-1.0-94mdk.i586.rpm printer-utils-1.0-94mdk.i586.rpm [root@pcp01740874pcs bin]# printerdrake cupsd (pid 2811) is running... rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded cupsd (pid 2811) is running... Entity: line 786: error: Opening and ending tag mismatch: arg_longname and options ^ Entity: line 787: error: Opening and ending tag mismatch: option and foomatic ^ Entity: line 787: error: Extra content at the end of the document ^ Entity: line 786: error: Opening and ending tag mismatch: arg_longname and options ^ Entity: line 787: error: Opening and ending tag mismatch: option and foomatic ^ Entity: line 787: error: Extra content at the end of the document ^ On Thu, 20 Feb 2003, till wrote: --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I installed Mandrake 9.1RC1 and could not print. The HP Deskjet 712c was not supported with the CUPS driver. It appears that pnm2ppa is needed for printing to this printer but the software is not part of the distribution. The following links point to some info: http://www.linuxprinting.org/printer_list.cgi?make=HP http://www.linuxprinting.org/show_printer.cgi?recnum=71232 When using Mandrake 9.0, I was able to configure this printer during the installation. Thanks!
Re: [Cooker] Issues With Galaxy-gnome (From Bug Report #1967)
Timothy R. Butler wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I think that considering that the technology has already been implemented previously in Geramik, it makes sense that Galaxy too should provide color matching between desktops for usability purposes. This benefits people of both GNOME and KDE, and with a little work would not only allow KDE users to enjoy color matching, but also introduce easily changable color schemes in GNOME for the first time (AFAIK). I filed a Bugzilla report, but since Mr. Crozat seems to think this is an "invalid" issue and has closed the bug *twice*, I would like to open the topic up here to see if others agree that this is NOT an invalid bug as Mr. Crozat seems to rather firmly think it is. David Walser has already responded agreeing that it is not. I would encourage those who agree with me that this is not an invalid bug to please vote for the bug so that Mr. Crozat will reverse his decision to close this (IMO) very important bug. You can vote and/or read the full original bug suggestion and followups at: https://qa.mandrakesoft.com/show_bug.cgi?id=1967 -Tim - -- - Timothy R. Butler[EMAIL PROTECTED] Universal Networks http://www.uninet.info Christian Portal and Search Tool: http://www.faithtree.com Enterprise Open Source Journal: http://www.ofb.biz -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+VV6WK37Cns9gJ0gRAjNJAJ9d54PB7pqjNotM9DKP/NhasEJogQCdEG6N irs72DqcLxtxKceuxe2wIbA= =F3+q -END PGP SIGNATURE- i agree with you i like galaxy colors in kde but i add geramik to have mozilla beautifull or gnomemeeting or gtk-gnutella ... in gnome galaxy is better then kde where it is only a flat color scheme with flat buttons... i don't understand why mandrake hates geramik in this way it is one of the best ideas for linux (both kde and gnome) ... from month... regard francesco
[Cooker] [Bug 1962] [drakxtools] Can't/won't install printer
https://qa.mandrakesoft.com/show_bug.cgi?id=1962 --- Additional Comments From [EMAIL PROTECTED] 2003-02-21 00:23 --- Can you tell the exact steps which you did and how printerdrake behaved? Did it try to set up a print queue automatically on start-up? Did it show the generated queue when the main window appeared? Did it really reach the main window? Or did it crash? Or did you try to set up your print queue with "Add printer"? Did it detect the printer? Did it suggest the correct printer model? Could you go through all steps of the wizard? Was the test page correctly printed? And, if you have a print queue, can you print out of applications? If you have a print queue, but cannot print, please follow the steps on http://www.cups.org/cups-help.html and report about your observations and perhaps even possible solutions? --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: While trying to install HP948c printer I get the following: rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded
Re: [Cooker] Issues With Galaxy-gnome (From Bug Report #1967)
On Thursday 20 February 2003 5:02 pm, Timothy R. Butler wrote: > Hi, > I think that considering that the technology has already been implemented > previously in Geramik, it makes sense that Galaxy too should provide color > matching between desktops for usability purposes. This benefits people of > both GNOME and KDE, and with a little work would not only allow KDE users > to enjoy color matching, but also introduce easily changable color schemes > in GNOME for the first time (AFAIK). I filed a Bugzilla report, but since > Mr. Crozat seems to think this is an "invalid" issue and has closed the bug > *twice*, I would like to open the topic up here to see if others agree that > this is NOT an invalid bug as Mr. Crozat seems to rather firmly think it > is. David Walser has already responded agreeing that it is not. > > I would encourage those who agree with me that this is not an invalid bug > to please vote for the bug so that Mr. Crozat will reverse his decision to > close this (IMO) very important bug. You can vote and/or read the full > original bug suggestion and followups at: > > https://qa.mandrakesoft.com/show_bug.cgi?id=1967 > > -Tim Optimally not the Geramik pixmap theme though. The QtCurve theme is more inline with what the Galaxy theme is all about. Take a look at this: http://kde-look.org/content/show.php?content=5065 -- Bret Baptist Systems and Technical Support Specialist [EMAIL PROTECTED] Internet Exposure, Inc. http://www.iexposure.com (612)676-1946 x17 Web Development-Web Marketing-ISP Services -- Today is the tomorrow you worried about yesterday.
[Cooker] Issues With Galaxy-gnome (From Bug Report #1967)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I think that considering that the technology has already been implemented previously in Geramik, it makes sense that Galaxy too should provide color matching between desktops for usability purposes. This benefits people of both GNOME and KDE, and with a little work would not only allow KDE users to enjoy color matching, but also introduce easily changable color schemes in GNOME for the first time (AFAIK). I filed a Bugzilla report, but since Mr. Crozat seems to think this is an "invalid" issue and has closed the bug *twice*, I would like to open the topic up here to see if others agree that this is NOT an invalid bug as Mr. Crozat seems to rather firmly think it is. David Walser has already responded agreeing that it is not. I would encourage those who agree with me that this is not an invalid bug to please vote for the bug so that Mr. Crozat will reverse his decision to close this (IMO) very important bug. You can vote and/or read the full original bug suggestion and followups at: https://qa.mandrakesoft.com/show_bug.cgi?id=1967 -Tim - -- - Timothy R. Butler[EMAIL PROTECTED] Universal Networks http://www.uninet.info Christian Portal and Search Tool: http://www.faithtree.com Enterprise Open Source Journal: http://www.ofb.biz -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+VV6WK37Cns9gJ0gRAjNJAJ9d54PB7pqjNotM9DKP/NhasEJogQCdEG6N irs72DqcLxtxKceuxe2wIbA= =F3+q -END PGP SIGNATURE-
Re: [Cooker] How to rebuild nvidia-kernel for rc1
On Thu, 20 Feb 2003 14:46:15 -0800 (PST), andre wrote: > > On Thursday 20 February 2003 17:58, [EMAIL PROTECTED] wrote: > > On Thu, 20 Feb 2003 08:44:15 -0800 (PST), [EMAIL PROTECTED] wrote: > > > In fact the drivers was build and installed, but when you try to install > > > nvidia-glx there is an error about "failed dependencies, nvidia-kernel" > > > is needed"). I have not the package nvidia-kernel rebuilt and I thought > > > that the crashes could be due to that.Just the nvidia.o is present in > > > /usr/src/RPM/BUILD/NVIDIA-KERNEL/ and doing from this directory a make > > > install it runs, but with the mentioned crashes. > > > > > > Francisco Alcaraz > > > Murcia (Spain) > > > > As root you can build the Nvidia driver from the source rpm as follows: > > rpm --rebuild NVIDIA_kernel-1.0-4191.src.rpm > > Which resulted in a build error, at leats with the 3123, > strangely i don't get that error anymore with that version. I get a working Nvidia kernel RPM, with lots of messages, but no fatal errors. What error(s) do you get? The only problem I've ever had was the kernel sources not being installed by default, which was easy to fix. I keep up to date with cooker, so I have probably rebuilt the Nvidia driver around 8 or 10 times in the past few months. It builds fine, and works fine. Have you looked at the instructions on the Nvidia web site? Paul
[Cooker] [Bug 1962] [drakxtools] Can't/won't install printer
https://qa.mandrakesoft.com/show_bug.cgi?id=1962 --- Additional Comments From [EMAIL PROTECTED] 2003-02-20 23:50 --- gc, It always installed under 8.2 and 9.0. Regards Trevor Rhodes === Powered by Linux- Mandrake 9.1 beta3 Registered Linux user # 290542 at http://counter.li.org Registered Machine #'s 186951, Source : my 100 % Microsoft-free personal computer. === 09:42:53 up 2 days, 7:43, 3 users, load average: 1.00, 1.00, 0.99 --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: While trying to install HP948c printer I get the following: rmmod: module parport_probe is not loaded modprobe: Can't locate module parport_probe modprobe: Can't locate module parport_probe rmmod: module parport_probe is not loaded
Re: [Cooker] [Bug 1179] [kdebase] Mandrake's new "kdm" is welcomedwith extreme displeasure
On Thu, 20 Feb 2003, et wrote: > replies in line > On Thursday 20 February 2003 04:35 pm, Buchan Milne wrote. > > > > Never seen a problem such as this, even with win4iln. > well then I believe it is also the same the first time you start X-CD-Roast > from the menu, (Kmenu. Application, Archiving, CD Burning, x-cd-roast) and it > gives no clue as to any other way to start xcdroast other than an error box > with an OK button that says "No root configuration or not readable! The > superuser must start and configure X-CD-Roast first, before other users can > use it. Ahhh, thanks for reminding me why I don't use X-CDRoast ;-). > I contend the in the past, a newbie could (and would) log out, login as root > > Ok, so someone needs to add a menu option for running X-CD-Roast setup via kdesu (or consolehelper or whatever). > > I am not a customer, I have not paid money for Crossover. Money usually > > speaks better than words, and if for example there is not Mandrake > > kernel for win4lin (which I have paid for), you can be sure I will write > > to NeTraverse. > > > > , and since I bought it as part of a > > AFAIK you only get an evaluation copy of Crossover on the Powerpack, but > > see below ... > yep that is correct, so the only folks that _sold_ me any software was the > folks I gave money to for the powerpack. > But they probably did not sell you Crossover ... they sold you StarOffice, and happened to bundle an eval (slight difference). > > If it is a Mandrake package, mail the packager listed in the changelog > > (it would be nice to have commercial RPMS also available in Bugzilla). > > > > But I still do not see how this is an mdkkdm bug. > well the change in mdkkdm (not having a text box for user name) is what made > these other programs have a problem. In relatioon to a a new users eyes, they > were not broken until mdkkdm fixed them. Well, I would prefer better options than X-CD-Roast. k3b seems mostly good enough, and it has been patched not to do stupid things on first start. > > > > What about msec, which would also prevent you from logging in > > as root? Maybe you should file a bug there too??. > > > Msec did do what we are talking about (previously), it just depended on the > level of security chosen. as I understand it (and please correct me if I am > mistaken) currently there is no way to type in a user name (root) if it is > not one of the displayed names (and a screenshot might be a good thing for > trolls like myself to get a clearer picture) perhaps this to (the current > complaint as I understand it) is a function of the level of msec security > chosen? Yes, I think in level 4 you will not get a user list. We have allow_user_list(0) in our /etc/security/msec/levels.local (IIRC), and so we never see a user list, just a user/passwd dialog, even with mdkkdm. Buchan -- |Registered Linux User #182071-| Buchan MilneMechanical Engineer, Network Manager Cellphone * Work+27 82 472 2231 * +27 21 8828820x121 Stellenbosch Automotive Engineering http://www.cae.co.za GPG Key http://ranger.dnsalias.com/bgmilne.asc 1024D/60D204A7 2919 E232 5610 A038 87B1 72D6 AC92 BA50 60D2 04A7
Re: [Cooker] Re: wine-20020219
O.K., wine is not TOTALLY broken, only mostly. Some applications (other than notepad, which as someone pointed out is a built-in) do still work. In the case of Lotus Notes (which worked fine before I applied the the Cooker updates from the 12-14th of this month), it does not even get far enough to draw the first frame of the application before dying of an 'XIO' error. My hardware is a Thinkpad with an ATI Mobility Radeon 7500. I also am running an absolutely up-to-date cooker including today's new version of X (although I am using my own higher kernel and I compiled wine myself). Paul z/OS core components development Internet: [EMAIL PROTECTED] Adam Williamson <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Sent by:cc: cooker-owner@linux-mSubject: Re: [Cooker] Re: wine-20020219 andrake.com 02/20/2003 01:02 PM Please respond to cooker On Thu, 2003-02-20 at 17:11, Paul R Streitman wrote: > > > We have a much bigger problem than getting the current wine release > (although I agree it would be worthwhile) - currently wine does not work at > all because of some sort of X bug. There is already a report in bugzilla. > For what it is worth, I still have the problem after updating to the latest > X in cooker and the latest wine CVS Er, it seems to be fine here, with absolutely up-to-date Cooker. Running notepad.exe works, at least. -- adamw
[Cooker] [Bug 1985] [rpmdrake] rpmdrake freezes in some cases
https://qa.mandrakesoft.com/show_bug.cgi?id=1985 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-02-20 23:40 --- *** This bug has been marked as a duplicate of 1445 *** --- Additional Comments From [EMAIL PROTECTED] 2003-02-20 23:40 --- Before adding a new bug, please search the bug database to see if the problem was already reported. Thank you. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Scenario: - open rpmdrake (install), check a category checkbox, for instance "other window managers" or "KDE workstation" - uncheck one of the new checked applications in the subtree or uncheck the category checkbox if the subtree is deployed -> freeze other scenario: - open rpmdrake (install), check an application to install that needs depencies - uncheck the application It seems it only happens with certain categories/lists of packages.
Re: [Cooker] Re: wine-20020219
On Thursday 20 February 2003 23:10, rcc wrote: > On Thu, 20 Feb 2003 21:40:53 +0100 > > andre <[EMAIL PROTECTED]> wrote: > > On Thursday 20 February 2003 20:09, rcc wrote: > > > On Thu, 20 Feb 2003 18:39:24 +0100 > > > > > > andre <[EMAIL PROTECTED]> wrote: > > > > winemine is buildin, notepad is a script to use the windows > > > > version. > > > > > > err, not necessarily, on my box it uses builtin notepad, I'm pretty > > > sure of that because there is no windows around here > > > > Your right > > > > > > checking the /usr/bin/notepad script i see this > > > > # then default bin directory > > if [ -x "/home/viet/rpm/tmp/wine-root/usr/bin/wine" ]; then exec > > "/home/viet/rpm/tmp/wine-root/usr/bin/wine" "$appname" "$@"; fi > > > > hehe, I've dealt with that already, the whole line is disabled by my > patch. As is basically everything between the first and last statement > of the script. Get to much cooker mail to read everything so i didn't noticed it, sorry
Re: [Cooker] How to rebuild nvidia-kernel for rc1
On Thursday 20 February 2003 17:58, [EMAIL PROTECTED] wrote: > On Thu, 20 Feb 2003 08:44:15 -0800 (PST), [EMAIL PROTECTED] wrote: > > In fact the drivers was build and installed, but when you try to install > > nvidia-glx there is an error about "failed dependencies, nvidia-kernel" > > is needed"). I have not the package nvidia-kernel rebuilt and I thought > > that the crashes could be due to that.Just the nvidia.o is present in > > /usr/src/RPM/BUILD/NVIDIA-KERNEL/ and doing from this directory a make > > install it runs, but with the mentioned crashes. > > > > Francisco Alcaraz > > Murcia (Spain) > > As root you can build the Nvidia driver from the source rpm as follows: > rpm --rebuild NVIDIA_kernel-1.0-4191.src.rpm Which resulted in a build error, at leats with the 3123, strangely i don't get that error anymore with that version.
Re: [Cooker] short list of fixes to make rc1 livable
On Thursday 20 February 2003 05:18 pm, [EMAIL PROTECTED] wrote: > I'm just not understanding why you are taking up so much time on the > mailing list talking about this. Obviously, the Linux kernel team is > working on making acpi work better with more machines, working around the > problems with the motherboard implementations, but that work may not show > up until the 2.6 kernel (and may not be complete then), and Mandrake isn't > going to be able solve it in the next few weeks.
[Cooker] eroaster-2.1.0-6mdk
eroaster-2.1.0-6mdk is no longer a viable rpm. Due to gnome-python and pygtk2 current rpm can no longer be installed and existing installation will give either python or bonobo errors. Current src will rebuild and install but program will give bonobo error. the eroaster 2.2.0 snapshot available from ftp://eclipt.uni-klu.ac.at/pub/projects/eroaster/snapshots/ will build, install, launch and most importantly work. The BuildRequires need to be changed to include new gnome-python and pygtk2 and exclude the old. Requires needs to include gnome-python-bonobo and to exclude the old. Charles -- Cats don't hunt seals. They would if they knew what they were and where to find them. But they don't, so that's all right. (The Unadulterated Cat) - Mandrake Linux 9.1 Kernel- 2.4.21pre4-8mdk - msg93891/pgp0.pgp Description: PGP signature
[Cooker] [Bug 1976] [Installation] dependency box didn't go away
https://qa.mandrakesoft.com/show_bug.cgi?id=1976 --- Additional Comments From [EMAIL PROTECTED] 2003-02-20 23:19 --- This is not limited to that package. It happened to me when selecting tetex-dvi, and was repeatable. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When I selected mplayer-gui a box popped up for the dependency on mplayer-skins. The box didn't go away, but I was able to select other packages. At some point (I was closing off, so I may have touched another button at the bottom of the window) the popup went away, but the next screen I saw was the task-selection screen :-( It had forgotten all my package selections
Re: [Cooker] short list of fixes to make rc1 livable
On Thu, 20 Feb 2003 14:07:03 -0800 (PST), tarvid wrote: > > On Thursday 20 February 2003 03:50 pm, Steffen Barszus wrote: > > On Thursday 20 February 2003 21:33, tarvid wrote: > > > On Thursday 20 February 2003 02:44 pm, Guillaume Cottenceau wrote: > > > > tarvid <[EMAIL PROTECTED]> writes: > > > So if I conceed it won't work on this box, what box will it work on? > > > > > I don't understand ? Whats your point ? use acpi=off and maybe noapic and > > the machines will running. Are you so concerned to acpi working on a > > machine that does not have a correct acpi-implementation ? Or are you just > > flaming ? > My point is as I asked above > > what box will it work on? > > I have a lot of people running with acpi and apic disabled. > > Life would be better for me if I could point to a list of chipsets that do > work. > > Like many Linux advocates, I have a large number of Windows users asking me > about Linux (thousands actually). Answers are nice. > > Jim Tarvid Since Mandrake doesn't have every piece of hardware to test against, it seems a little silly to ask them a question like that. 9.1 will be shipped with both acpi and apic disabled because of the number of issues that have been seen with them. If you install 9.1 you should have no issues with machines that acpi and apic don't work on, and isn't that what you want, something that installs and works without too much work on your part? That is what Mandrake wants to ship. If you think acpi or apic should work on a machine, try it out. I'm just not understanding why you are taking up so much time on the mailing list talking about this. Obviously, the Linux kernel team is working on making acpi work better with more machines, working around the problems with the motherboard implementations, but that work may not show up until the 2.6 kernel (and may not be complete then), and Mandrake isn't going to be able solve it in the next few weeks.
[Cooker] [Bug 1987] [WindowMaker] New: window list doesn't update
https://qa.mandrakesoft.com/show_bug.cgi?id=1987 Product: WindowMaker Component: program Summary: window list doesn't update Version: 0.80.2-3mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] The window list in windowmaker doesn't add items past the first item. Also crashes if you add too many items and then try to use one of the items in the window list. >From 9.1b3 distro. Tarball from www.windowmaker.org doesn't have same problem. No gnome or kde progs running at the time. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 1986] [drakxtools] New: Connection sharing / interface detection
https://qa.mandrakesoft.com/show_bug.cgi?id=1986 Product: drakxtools Component: DrakConnect Summary: Connection sharing / interface detection Version: 9.1-2mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] The setup programs correctly detected both my ethernet cards and configured them as eth0 and eth1. But later, when selecting DrakGw to set up sharing, DrakGw reported that there was only one interface. Ifconfig reports both eth0 and eth1 still present. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
Re: [Cooker] Re: wine-20020219
On Thu, 20 Feb 2003 21:40:53 +0100
andre <[EMAIL PROTECTED]> wrote:
> On Thursday 20 February 2003 20:09, rcc wrote:
> > On Thu, 20 Feb 2003 18:39:24 +0100
> >
> > andre <[EMAIL PROTECTED]> wrote:
> > > winemine is buildin, notepad is a script to use the windows
> > > version.
> >
> > err, not necessarily, on my box it uses builtin notepad, I'm pretty
> > sure of that because there is no windows around here
>
> Your right
>
>
> checking the /usr/bin/notepad script i see this
>
> # then default bin directory
> if [ -x "/home/viet/rpm/tmp/wine-root/usr/bin/wine" ]; then exec
> "/home/viet/rpm/tmp/wine-root/usr/bin/wine" "$appname" "$@"; fi
>
hehe, I've dealt with that already, the whole line is disabled by my
patch. As is basically everything between the first and last statement
of the script.
[markd@pc4 markd]$ strace -f notepad 2>&1 | grep notepad
...
[pid 10974] open("/usr/lib/wine/notepad.exe.so", O_RDONLY|O_LARGEFILE) =
6
[pid 10974] open("/usr/lib/wine/notepad.exe.so", O_RDONLY) = 6
...
there's wine's builtin notepad
- Mark
Re: [Cooker] [Bug 1179] [kdebase] Mandrake's new "kdm" is welcomed with extreme displeasure
replies in line On Thursday 20 February 2003 04:35 pm, Buchan Milne wrote. > > Never seen a problem such as this, even with win4iln. well then I believe it is also the same the first time you start X-CD-Roast from the menu, (Kmenu. Application, Archiving, CD Burning, x-cd-roast) and it gives no clue as to any other way to start xcdroast other than an error box with an OK button that says "No root configuration or not readable! The superuser must start and configure X-CD-Roast first, before other users can use it. I contend the in the past, a newbie could (and would) log out, login as root > > > NOT > > However, perhaps, since I am just a troll, and you are a well respected > > developer, it would care more weight if you were to write to the fine > > folks > > > who developed Crossover and tell them. but since YOU suggest telling > > the fine > > > folks that sold me the software > > I am not a customer, I have not paid money for Crossover. Money usually > speaks better than words, and if for example there is not Mandrake > kernel for win4lin (which I have paid for), you can be sure I will write > to NeTraverse. > > , and since I bought it as part of a > > > MandrakeSoft produced set of PowerPack disks, I figured the best way > > to tell > > > the folks I might buy the next PowerPack from before they take someone > > else's > > > advice and sell me something I can not use > > AFAIK you only get an evaluation copy of Crossover on the Powerpack, but > see below ... yep that is correct, so the only folks that _sold_ me any software was the folks I gave money to for the powerpack. > > gee I was sure this was the > > place to tell "whoever sells you this software, and ask them to have > > it run > > > via kdesu or something like that. In fact, that was what I was doing. > > If it is a Mandrake package, mail the packager listed in the changelog > (it would be nice to have commercial RPMS also available in Bugzilla). > > But I still do not see how this is an mdkkdm bug. well the change in mdkkdm (not having a text box for user name) is what made these other programs have a problem. In relatioon to a a new users eyes, they were not broken until mdkkdm fixed them. > What about msec, which would also prevent you from logging in > as root? Maybe you should file a bug there too??. > > Buchan Msec did do what we are talking about (previously), it just depended on the level of security chosen. as I understand it (and please correct me if I am mistaken) currently there is no way to type in a user name (root) if it is not one of the displayed names (and a screenshot might be a good thing for trolls like myself to get a clearer picture) perhaps this to (the current complaint as I understand it) is a function of the level of msec security chosen? et
[Cooker] [Bug 1801] [Installation] Install fails on with ATA133 PDC20276 MBFastrak133 controller
https://qa.mandrakesoft.com/show_bug.cgi?id=1801 --- Additional Comments From [EMAIL PROTECTED] 2003-02-20 22:52 --- Hi, not shure whether i should create a new bug report, but the symptoms are exactly the same. MB epox 8k5a3+ via8235 onboard HPT374, 4 ibm deskstart 120GXP 80GB on each HPT chanel as master ( used as a udma not raid controler ) via master 1 DVD LG DRD-8120B via master 2 CDRW LG CED-8080B via slave 2 Iomega ZIP-100 ATAPI all drives are detected( on the console log) but the installer do not want to find a cdrom containing the instalation i couldn't get bug report : no propt on alt-F2 typing bug -- no efect any hints? svetljo --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: 9.1 RC1 installation fails on an Asus P4B533-E motherboard with the MBFasttrack133 controller. The installer detects that a SCSI interface is in the machine and asks for which module to load. I choose ataraid.o and the installer reports that the module was successfully loaded and the SCSI interface was found. Then it asks if there are any others. No matter what I choose at this point... If I say "No," it will report that there are no devices available to install filesystems. If I say "Yes," it naturally drops me back to the SCSI module selection screen. My hard drive is hooked up to this PDC20276 controller. My CDROMs are hooked up to standard IDE controller apart from the PDC20276. Since this problem existed in 9.0 (in a much much worse way) I was really looking forward to 9.1 solving this!
[Cooker] [Bug 1985] [rpmdrake] New: rpmdrake freezes in some cases
https://qa.mandrakesoft.com/show_bug.cgi?id=1985 Product: rpmdrake Component: program Summary: rpmdrake freezes in some cases Version: 2.1-6mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: critical Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Scenario: - open rpmdrake (install), check a category checkbox, for instance "other window managers" or "KDE workstation" - uncheck one of the new checked applications in the subtree or uncheck the category checkbox if the subtree is deployed -> freeze other scenario: - open rpmdrake (install), check an application to install that needs depencies - uncheck the application It seems it only happens with certain categories/lists of packages. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
