[Cooker] Lilo cooker
Hello, again Tested, verified and approved lilo work fine with Smart array and cooker is perfectly installed with "bootnrt.img" of mandrake cassini (6.1b) this thusday morning at GMT 07:00 am. Now, go back with panoramix for testing so long M. Prillot
Re: [Cooker] Panoramix install
Pixel wrote: PRIILOT Michel [EMAIL PROTECTED] writes: HORROR, in the proc directory there is NO pci file., NO more array file and the /proc/bus/pci is EMPTY... for /proc/pci, that's normal. It's been removed since it's not used. Instead, i'll put lspci (or something alike). As for /proc/bus/pci being empty, it's more strange. Do you have something else than the Smart Array on your pci bus? Shouldn't cpqarray be insmoded before /proc/array appears? Anyway you can get the information using another distrib (aka 6.0) or with the newt install... cu Pixel. Ok, I will test with 6.0 while the last update (gi_network and mkdinst) failed...: load the second stage OK, but can't go in grafic mode... on tty3: "ERROR ftp.pm did not return a true value at /usr/bin/perl-install/install2.pm line 390." "ERROR: can't call method "destroy" on an undefined value during global destruction" this last line occurs 3 times. on tty1: "error opening security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy" "Couldn't load XKB keymap, failing back to pre-XKB keymap" "GLib-WARNING **: getpwuid_r() failed due to: No such user 0." "Use of unitialized value at /usr/bin/perl-install/my_gtk.pm line 65 (#1)" " (W) An undefined value was used as if it were already defined. It was" " interpreted as a "" or a 0, bur may be it was a mistake. To suppress this" " warning assign an initial value to your varibles." "ftp.pm did not return a true value at /usr/bin/perl-install/install2.pm line 390." "Attemp to free unreferebced scalar during global destruction (#2)" "Attemp to free unreferebced scalar during global destruction." "install exited abnormally" on tty4, all seems correct. M. Prillot
Re: ftp panoramix install broken today (was Re: [Cooker] Panoramixinstall)
Pixel wrote: PRIILOT Michel [EMAIL PROTECTED] writes: "ERROR ftp.pm did not return a true value at /usr/bin/perl-install/install2.pm line 390." silly me :((( it's corrected now, but i need to upload again... cu Pixel. Hello, Yes I am harassing you, but why not yet update on mirror's ? M. Prillot
Re: ftp panoramix install broken today (was Re: [Cooker]Panoramixinstall)
Pixel wrote: PRILLOT Michel [EMAIL PROTECTED] writes: Yes I am harassing you, but why not yet update on mirror's ? sorry, i'm putting *now* ! Hi, I am back.. Good and bad news: good: all is right t'ill scsi detection. bad: if the onboard controller (ncr53c876) is well detected, the Smart array is not. So I pick it in the selection list and here is the result: on tty5: a message telling me that there was an error while no device for partition found... on tty3: "bla, bla, bla" "starting step 'patitionDisks'" "no scsi avaible" "Compaq Smart Array controller avaible" "Error 'Une erreur est survenue pour creer de nouvelles partitions. "Veuillez verifier votre materiel. at /usr/bin/perl-install/install2.pm ligne 285" on tty4 "x bla bla"- detection/init of ncr53876 OK. "7 cpqarray: Device e11 has been found at 2 0" "4 Compaq SMART2 driver (v1.0.5)" "4 Found 1 controller(s)" "6 cpqarray ida/c0d0: blksz=51é nr_blks=17764320" "4 ida/c0d0: ida/c0d0p1 ida/c0d0p2 ida/c0d0p4" He he, I don't ommit this... in /proc/array, one file: ida0 "ida0:Compaq Smart Array 3200 Controller Board ID: 40320E11 Firmware revision: 4.06 Controller Sig: a576cc28 Memory Address: 9481bf00 I/O Port: 6000 IRQ: a Logical drives: 1 Physical drives: 1 Current Q depth: 0 Max Q depth since init: 1 Logical Drive Info: ida/c0d0: blksiz=512 nr_blks=17764320 nr_allocs=5 nr_free=5" in /proc/bus/pci/devices 11660005 0 0030 1013 0 C508 ... ... (all 0) 0078 0e110001 0 ... ... (all 0) 0088 11660005 0 ... ... (all 0) 0120 100f 5 5001 c6efcf00 c6eff000 ... ... (all 0) 0121 100f 9 5401 c6efce00 c6efe00 (fuck, I missed one digit...) ... ... (all 0) 0130 10680005 5 5801 c6efd000 ... ... (all 0) 0140 10140022 0 ... ... (all 0) 0200 0e11ae10 a 6001 c60 0 ... ... (all 0) in /proc/bus/pci, 3 directory with file containing binary... 00/00.0 00/06.0 00/0f.0 00/11.0 01/04.0 01/04.1 01/06.0 01/08.0 02/00.0 That's all for panoramix... NOW the old procedure (from bootnet.img): I think we have found the miss. Remember, on tty3: "Found driver for NCR 53C8xx PCI" "running /bin/insmod /bin/insmod /modules/ncr53c8xx.o" "insmod failed!" and same for the Smart-2/P raid controller There is a problem, ok, I go on tty2 and try: # /bin/insmod /modules/cpqarray.o /tmp/cpqarray.o: kernel-module version mismatch /tmp/cpqarray.o was compiled for kernel version 2.2.11-BOOT while this kernel is version 2.2.10-BOOT # Ye, perhaps the soluce is giving us a "bootnet.img" with kernek 2.2.11... I would stay before my mail screen for load as soon as possible your new version. Thank's for your work M. Prillot
[Cooker] Panoramixinstall was broken (old bootnet also!)
Hi, I am back.. Good and bad news: good: all is right t'ill scsi detection. bad: if the onboard controller (ncr53c876) is well detected, the Smart array is not. So I pick it in the selection list and here is the result: on tty5: a message telling me that there was an error while no device for partition found... on tty3: "bla, bla, bla" "starting step 'patitionDisks'" "no scsi avaible" "Compaq Smart Array controller avaible" "Error 'Une erreur est survenue pour creer de nouvelles partitions. "Veuillez verifier votre materiel. at /usr/bin/perl-install/install2.pm ligne 285" on tty4 "x bla bla"- detection/init of ncr53876 OK. "7 cpqarray: Device e11 has been found at 2 0" "4 Compaq SMART2 driver (v1.0.5)" "4 Found 1 controller(s)" "6 cpqarray ida/c0d0: blksz=51é nr_blks=17764320" "4 ida/c0d0: ida/c0d0p1 ida/c0d0p2 ida/c0d0p4" He he, I don't ommit this... in /proc/array, one file: ida0 "ida0:Compaq Smart Array 3200 Controller Board ID: 40320E11 Firmware revision: 4.06 Controller Sig: a576cc28 Memory Address: 9481bf00 I/O Port: 6000 IRQ: a Logical drives: 1 Physical drives: 1 Current Q depth: 0 Max Q depth since init: 1 Logical Drive Info: ida/c0d0: blksiz=512 nr_blks=17764320 nr_allocs=5 nr_free=5" in /proc/bus/pci/devices 11660005 0 0030 1013 0 C508 ... ... (all 0) 0078 0e110001 0 ... ... (all 0) 0088 11660005 0 ... ... (all 0) 0120 100f 5 5001 c6efcf00 c6eff000 ... ... (all 0) 0121 100f 9 5401 c6efce00 c6efe00 (fuck, I missed one digit...) ... ... (all 0) 0130 10680005 5 5801 c6efd000 ... ... (all 0) 0140 10140022 0 ... ... (all 0) 0200 0e11ae10 a 6001 c60 0 ... ... (all 0) in /proc/bus/pci, 3 directory with file containing binary... 00/00.0 00/06.0 00/0f.0 00/11.0 01/04.0 01/04.1 01/06.0 01/08.0 02/00.0 That's all for panoramix... ** ** ** NOW the old procedure (from bootnet.img): I think we have found the miss. Remember, on tty3: "Found driver for NCR 53C8xx PCI" "running /bin/insmod /bin/insmod /modules/ncr53c8xx.o" "insmod failed!" and same for the Smart-2/P raid controller There is a problem, ok, I go on tty2 and try: # /bin/insmod /modules/cpqarray.o /tmp/cpqarray.o: kernel-module version mismatch /tmp/cpqarray.o was compiled for kernel version 2.2.11-BOOT while this kernel is version 2.2.10-BOOT # Ye, perhaps the soluce is giving us a "bootnet.img" with kernel 2.2.11... I would stay before my mail screen for load as soon as possible your new version. Thank's for your work M. Prillot
[Cooker] Cooker or 6.1b
Hello, "bootnet.img" for cooker is buils with a old kernel 2.2.10-BOOT (and at stage2 teh insmod fail!).. Question: Why the "bootnet.img" of mandrake 6.1b is build with the good kernel (2.2.11-BOOT) ? Can I use it for the actual cooker ? (Sometimes, hen we test panoramix, it can be a goodies for checking and/or explain some anomaly). thank for quick answer. M. PRILLOT
