[Cooker] Mandrake 9.1 Beta 3 and Dual Processors
I have used linux for some time, but this is my first jump into Mandrake. I tried beta 3 for KDE 3.1 anyways, i have a dual PIII 1.13 with 512 cacheon each chip. Mandrake 9.1 b3 is not recognizing the 2nd proc. Did I misssomething or is this a beta issue?
Re: [Cooker] Mandrake 9.1 Beta 3 and Dual Processors
It appears not, 2.4.21pre4-1mdk is uname -r result thoughts on next step? is it something that i would have had to select on install? I have not used mandrake b4. THanks Ross - Original Message - From: Thierry Vignaud [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, February 06, 2003 10:20 AM Subject: Re: [Cooker] Mandrake 9.1 Beta 3 and Dual Processors Ross Ferson [EMAIL PROTECTED] writes: I have used linux for some time, but this is my first jump into Mandrake. I tried beta 3 for KDE 3.1 anyways, i have a dual PIII 1.13 with 512 cache on each chip. Mandrake 9.1 b3 is not recognizing the 2nd proc. Did I miss something or is this a beta issue? kernel-smp was not installed ?
Re: [Cooker] Mandrake 9.1 Beta 3 and Dual Processors
please do. I hate not using what i have. anyone advise what i should do ? reinstall? or ? Ross - Original Message - From: scott chevalley [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, February 06, 2003 10:46 AM Subject: Re: [Cooker] Mandrake 9.1 Beta 3 and Dual Processors Ross Ferson wrote: It appears not, 2.4.21pre4-1mdk is uname -r result thoughts on next step? is it something that i would have had to select on install? I have not used mandrake b4. THanks Ross - Original Message - From: Thierry Vignaud [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, February 06, 2003 10:20 AM Subject: Re: [Cooker] Mandrake 9.1 Beta 3 and Dual Processors Ross Ferson [EMAIL PROTECTED] writes: I have used linux for some time, but this is my first jump into Mandrake. I tried beta 3 for KDE 3.1 anyways, i have a dual PIII 1.13 with 512 cache on each chip. Mandrake 9.1 b3 is not recognizing the 2nd proc. Did I miss something or is this a beta issue? kernel-smp was not installed ? Previously the installer would determine automatically that you were multi-processor and install the smp kernel by default. I installed cooker on my wifes Dual Celeron a month ago, but i didn't notice if it was using the SMP kernel. I'll have to check... Scott
Re: [Cooker] Mandrake 9.1 Beta 3 and Dual Processors
is this an undocumented bug in 9.1 b3? seems it has affected many and both amd and intel. - Original Message - From: Thierry Vignaud [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, February 06, 2003 11:36 AM Subject: Re: [Cooker] Mandrake 9.1 Beta 3 and Dual Processors Leon Brooks [EMAIL PROTECTED] writes: rpm -qa | grep kernel btw, rpm -qa 'kernel-sml-*' is much more efficient :-)
Re: [Cooker] Mandrake 9.1 Beta 3 and Dual Processors
what is the difference between urpmq kernel and urpmi kernel ? - Original Message - From: Austin Acton [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, February 06, 2003 11:47 AM Subject: Re: [Cooker] Mandrake 9.1 Beta 3 and Dual Processors On Thu, 2003-02-06 at 11:36, Thierry Vignaud wrote: Leon Brooks [EMAIL PROTECTED] writes: rpm -qa | grep kernel btw, rpm -qa 'kernel-sml-*' is much more efficient :-) What's wrong with 'urpmq kernel'? Austin -- Austin Acton Hon.B.Sc. Synthetic Organic Chemist, Teaching Assistant Department of Chemistry, York University, Toronto MandrakeClub Volunteer (www.mandrakeclub.com) homepage: www.groundstate.ca
[Cooker] scsi scanner still not configured correctly
Installed from beta4 and updated from cooker (VERSION Mandrake Linux Cooker-i586 20020903 0:32) Harddrake still insists the scanner is on /dev/sg It works if I enter xsane microtek:/dev/sg0 but since there is no way to specify a port when using the gimp plugin it just gives the error message xsane: no devices found This is a scanner and scsi card I have been using without problems since MDK 6.0 I see from the list I'm not the only one whose scsi scanner is not set up correctly. I hope this bug doesn't make it into 9.0 final. I will be more than happy to supply any debugging info requested. Please reply my adress as I am not subscribed. Sorry if this message is a duplicate. Thanks, rm __ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com
[Cooker] Wine server failed to run
Beta4 updated from cooker today. Wine fails with the following errors. $ wine /mnt/windows/windows/notepad.exe wineserver: /home/ross/.wine/config is not a valid registry file wine: for some mysterious reason, the wine server failed to run. __ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com
[Cooker] Microtek scsi scanner - beta4
My microtek Scanmaker X6EL is not recognized in xsane. The error message is xsane: no devices available dmesg says: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 Adaptec aic7850 SCSI adapter aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs Vendor: Model: scanner 636EL Rev: 1.50 Type: ScannerANSI SCSI revision: 02 Harddrake says: Vendor: scanner 636EL Description: port: /dev/sg However /dev/sg does not exist. I will be happy to provide any information that will help. __ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com
[Cooker] Harddrake doesn't configure my scanner
Beta4 updated from cooker today. Xsane works if I run xsane microtek2:/dev/sg0 but just running xsane or the gimp-xsane plugin produces the error xsane: no devices available. Harddrake says: Vendor: scanner 636EL Description: port: /dev/sg Harddrake lets me manually select the model since it reports 636el is not in the database, but there is no dialog to manually select the port. If I could figure out what config file harddrake writes(or is supposed to) I would configure it myself. Help please. Tnx __ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com
[Cooker] Konqueror crash in beta4
Left clicking on an mp3 file in Konqueror causes it to crash. The backtrace from the KDE crash handler says: ... (no debugging symbols found)...(no debugging symbols found)... (no debugging symbols found)...(no debugging symbols found)... 0x41020739 in wait4 () from /lib/i686/libc.so.6 #0 0x41020739 in wait4 () from /lib/i686/libc.so.6 #1 0x4109d340 in sys_sigabbrev () from /lib/i686/libc.so.6 #2 0x40e61a73 in waitpid () from /lib/i686/libpthread.so.0 #3 0x4061cf55 in KCrash::defaultCrashHandler(int) () from /usr/lib/libkdecore.so.4 Right clicking and selecting Open With - Embedded Media Player produces the same results. Beta4 updated from cooker today.
[Cooker] Error running MakeCD
With updated cooker (VERSION Mandrake Linux Cooker-i586 20020814 10:33) when running: $ ./misc/MakeCD --discsize 73400 -t /tmp/ -a /mnt/disk/mirrors/cooker I get mkcd: mkcd: Custom disc size selection mkcd: Setting the top directory mkcd: Auto mode auto_mode: adding /mnt/disk/mirrors/cooker/Mandrake/RPMS auto_mode: adding /mnt/disk/mirrors/cooker/Mandrake/RPMS2 auto_mode: list options auto - 1 HASH(0x804ca140) getGroups getGroups: install disc for group = (1) getGroups: using /mnt/disk/mirrors/cooker/Mandrake/base/rpmsrate as rpmsrate file getGroups: 1 defined as deps file directory getGroups DEBUG: discdep for group = () getGroups: ordered rpm list for group : 1 getGroups: ordered srpm list for group : getGroups: ordered rpm list for group 1: getGroups: ordered srpm list for group 1: orderGroups: ordering metagroups Group (install disc 1) Master of disc 1/rpms = () Group 1 (install disc ) orderGroups: group metagroup orderGroups: group 1 metagroup orderGroups: discs group 0 conflict with group 0 (1)orderGroups: disc 1 orderGroups: discs orderGroups: discs orderGroup: disc sorting 1 2 LIST 1 = 2 makeWithGroups: Group listing ARRAY(0x80501598) (1 -- ARRAY(0x805015b0)) Group: ARRAY(0x80501598) (1 -- ARRAY(0x805015b0)) makeDiscs: Discs 1 TOPDIR /tmp/build/Cooker makeDisc: Fixed part of disc 1 makeDisc: removing /tmp/build/Cooker/1.list makeDisc: removing /tmp/build/Cooker/1 makeDiscs: dir (0) makeDiscs: generic (0) makeDiscs: installation (0) makeDiscs: boot (0) Can't use string () ) as a symbol ref while strict refs in use at /misc/perl5/vendor_perl/5.8.0/Mkcd/Tools.pm line 818. I had to chmod +x the scripts in ./misc and also /Mandrake/mdkinst/lib/*so* to get MakeCD to exec. What am I doing wrong?
[Cooker] getgrnam and DCOP on HP laptop
Hello all, * updgraded from mandrake 8.1 to 8.2b (was: kernel 2.4.8-34 which worked great). * upgrade went flawlessly, but during reboot, I get a message about getgrnam failling and then all the boot messages are garbled from then on (not using auroa) * system continues to boot, but when I try to log into KDE it complains about interprocess communication and not being able to start the dcopserver. Also, weirdly, the kdm login screen can't seem to find the pixmaps. * sound, video, and ethernet work great * system info: HP Pavilion N5270 (PIII 700) * log files: surprisingly nothing interesting found in /var/log/syslog, I'm not sure where else to look. I apologize if this topic has been covered before. I may be an idiot, but I was unable to find a way to search the mailing list archive. The search this site capability didn't search the mailing list but the entire mandrake website instead. If anyone knows how I can search the mailing list please let me know! Thanks! --Ross
[Cooker] SUB cooker
-- Ross Burton Software Engineer OneEighty Software Ltd Tel: +44 20 8263 2332 The Lansdowne Building Fax: +44 20 8263 6314 2 Lansdowne Road[EMAIL PROTECTED] Croydon, Surrey CR9 2ER, UK http://www.180sw.com./ Under the Regulation of Investigatory Powers (RIP) Act 2000 together with any and all Regulations in force pursuant to the Act OneEighty Software Ltd reserves the right to monitor any or all incoming or outgoing communications as provided for under the Act