[Cooker] [Bug 6359] [Bugzilla] needinfo bugs appears w/o any state in bug list
http://qa.mandrakesoft.com/show_bug.cgi?id=6359 --- Additional Comments From [EMAIL PROTECTED] 2003-11-14 23:40 --- This is probably the same as bug 3390 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: whereas all bugs in othere states (RESOLVED, NEW, UNCONFIRMED, ...) hasve their state filled in the status column, those who are in NEEDINFO state have an empty field. what's more, when looking at a NEEDINFO bug, the leave as XYZ show an empty state too. the odds're high that bugzilla use some sort of state id = state string table that has not been updated when adding NEEDINFO flag
[Cooker] [Bug 5321] [galeon] Problem managing bookmarks (drag to new folder)
http://qa.mandrakesoft.com/show_bug.cgi?id=5321 --- Additional Comments From [EMAIL PROTECTED] 2003-11-12 17:24 --- Sorry, won't do it again. See bug 190, bug 2823, bug 6011 and numerous others for closing bugs that are reported upstream, or where contributors are told to report upstream. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: REOPENED creation_date: description: In the bookmark editor, if you create a new folder, it is not possible to drag existing bookmark into the empty folder. The work-around is to create a new dummy bookmark in the empty folder so that it is no longer empty. After dropping existing bookmarks into the folder, the dummy bookmark can be removed.
[Cooker] [Bug 6315] [drakconf] MCC fails to create boot floppy in LM 9.2
http://qa.mandrakesoft.com/show_bug.cgi?id=6315 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 17:51 --- *** This bug has been marked as a duplicate of 5188 *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I am using the 2.4.22-21mdk-i686-up-4GB kernel. When I try to create a boot floppy from mcc, it gives an error about No space left on device after trying to copy all relevant files for more than a minute. So I tried the command-line option: /bin/bash /sbin/mkbootdisk --noprompt --verbose --device /dev/fd0 2.4.22-21mdk-i686-up-4GB and got this message: Formatting /dev/fd0... mount: /dev/fd0 already mounted or /tmp/syslinux.mnt.12719.0 busy done. Copying /boot/vmlinuz-2.4.22-21mdk-i686-up-4GB... done. Creating initrd image... cp: writing `/tmp/mkbootdisk/initrd.img': No space left on device Error ! I omitted the raid and scsi modules and still it ran out of space. Is there any way to create a boot floppy with this kernel version ?
[Cooker] [Bug 5188] [mkbootdisk] Impossible to create a Boot Disk
http://qa.mandrakesoft.com/show_bug.cgi?id=5188 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 17:51 --- *** Bug 6315 has been marked as a duplicate of this bug. *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Tester : Gregory Step to reproduce : = - Start Drakfloppy (you have this error : Erreur lors de la lecteure de « MODULES » dans /etc/sysconfig/drakfloppy at /usr/sbin/drakfloppy line 58.) - Click on Button in order to create a BootDisk - After a few second you have an error message, no enought space on device, but it's an empty floppy.
[Cooker] [Bug 6325] [Bugzilla] Bugzilla gives weird error !!
http://qa.mandrakesoft.com/show_bug.cgi?id=6325 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 17:58 --- Bugzilla seems to be converting the platform for a bug from PC to All when people edit older bugs. This would seem to be due to All being a new default. (Whereas PC was probably the old default). If you look at your changes to your own older bugs (eg bug 5429), then you'll see that bugzilla has made such a change. But since you don't own bug 5188, it didn't allow you to change it. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: In bug 5188 , I tried to add the line Problem still there in bug 6315 (LM9.2 final). and when I clicked on submit, this strange error came up: You tried to change the rep_platform field from to All, but only the owner or submitter of the bug, or a sufficiently empowered user, may change that field. Now, I did not try to change any field (obviously since I don't own the bug). The strangest part the error message is rep_platform field from to All. From _WHAT_ to All ? Bugzilla seems very confused.
[Cooker] [Bug 6325] [Bugzilla] Bugzilla gives weird error !!
http://qa.mandrakesoft.com/show_bug.cgi?id=6325 --- Additional Comments From [EMAIL PROTECTED] 2003-11-10 05:40 --- Oh, no doubt it should be corrected. Just explaining why I think the error occurs. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: In bug 5188 , I tried to add the line Problem still there in bug 6315 (LM9.2 final). and when I clicked on submit, this strange error came up: You tried to change the rep_platform field from to All, but only the owner or submitter of the bug, or a sufficiently empowered user, may change that field. Now, I did not try to change any field (obviously since I don't own the bug). The strangest part the error message is rep_platform field from to All. From _WHAT_ to All ? Bugzilla seems very confused.
[Cooker] [Bug 6314] [urpmi] Wrong MD5SUM file in Mandrake 9.2 (FTP/Internet Install)
http://qa.mandrakesoft.com/show_bug.cgi?id=6314 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||WONTFIX --- Additional Comments From [EMAIL PROTECTED] 2003-11-08 20:02 --- If you're interrested in the wrong link for the stable bugzilla being corrected, vote for bug 6301 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Sorry that I submit this bug here but the link from http://qa.mandrakesoft.com/enter_bug.cgi to http://bugs.mandrakesoft.com/ is dead (error msg not found on mozilla-1.4). Please forward this bug report to a responsible person (distribution maintainer). Additionally, please forward it to the Webmaster, too, for repairing the dead link. Bug Description === I realized that all MD5SUMs of hdlist and synthesis.hdlist cz files seem to be wrong in the directory http://ftp.club-internet.fr/pub/unix/linux/Mandrake/9.2/i586/Mandrake/base/ The concerning files are dated from 2003-Nov-07 but the MD5SUM file is dated from 2003-Nov-05. It contains the lines: c8dc25baf021e3da8027f63085907269 hdlist.cz 2f75425f63b4649d78e14eed7eaefb43 hdlist2.cz e6776b2e7d57359f371b9d8d6781debd hdlist3.cz 8847144faa6b102a469390a99f560396 synthesis.hdlist.cz 01d0655507ed92cd3b849b0efd5e389c synthesis.hdlist2.cz f7e1d4649d7efef931ad5b46773d51c6 synthesis.hdlist3.cz My md5sum test have these results: [EMAIL PROTECTED] md5sum *.cz 0e423c55a4b154e82e9d4024b899bfe4 hdlist.cz cb5448f0eedd3b03e2db2f33086062f5 hdlist2.cz 0c65dfb17c53e7b3b0131474f57c9e28 hdlist3.cz b0e2eda013e3d96caa8f54ea4b03dd63 synthesis.hdlist.cz 2d3803c89772742cd56d55f25e2785f0 synthesis.hdlist2.cz b24396607501301413a8fca89e09ae01 synthesis.hdlist3.cz Please re-create the synthesis and hdlist files and the MD5SUM file ... Thanks, Guenter
[Cooker] [Bug 1083] [Installation] Invailed or not a mandrake Disc
http://qa.mandrakesoft.com/show_bug.cgi?id=1083 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Platform||All Resolution||WORKSFORME --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 06:07 --- closing bug with no follow-up -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Does NOT Boot CD (Yes, My Computer is Bootable From CD-Rom Drive, and is setup right)Even After Trying to boot from Floppy Drive, it saids the CD_Rom does not appear to be a mandrake Disc. The Install menu (\dosutils\autorun.exe)run ok in Windows
[Cooker] [Bug 1006] [kdebase] Mandrake 9.1 Beta 2 clean install fails consistently on KDE
http://qa.mandrakesoft.com/show_bug.cgi?id=1006 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||WORKSFORME Summary|Mandrake 9.1 Beta 2 clean |Mandrake 9.1 Beta 2 clean |install fails consistently |install fails consistently |on KDE |on KDE --- Additional Comments From [EMAIL PROTECTED] 2003-08-29 18:26 --- No activity has been seen on this bug since 20030122 and it is still in UNCONFIRMED state. This probably means that the information provided was not clear enough, or that the bug is not valid anymore. Please test and confirm that this bug is still valid with the latest cooker version, or close it. --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 06:17 --- close old bug with now follow-up -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: So did Beta 1. I get an error installing KDEBASE and another error installing KDEMULTIMEDIA. In both cases your installer tells me that either my CD or my CD drive are bad. That seems unlikely since I can install other vendors' distros no problem, and since both beta 1 and beta 2 behave the same way (they both give me the same errors.) I was able to get a text-mode install to work, but only for the most minimal - that is, no GUI - system.
[Cooker] [Bug 887] [koffice] No koffice-i18n-ca
http://qa.mandrakesoft.com/show_bug.cgi?id=887 [EMAIL PROTECTED] changed: What|Removed |Added Severity|normal |major --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 06:29 --- This bug is still present. Please advise as to why this is not being included. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I don't know why there is not a koffice-i18n-ca package if the sources are available at ftp://ftp.kde.org/pub/kde/stable/koffice-1.2.1/src/koffice-i18n-ca-1.2.1.tar.bz2 I would like to have access to my language translation of Koffice in Mandrake Thanks
[Cooker] [Bug 674] [kdebase] development environments idle
http://qa.mandrakesoft.com/show_bug.cgi?id=674 [EMAIL PROTECTED] changed: What|Removed |Added Status|ASSIGNED|RESOLVED Resolution||INVALID --- Additional Comments From [EMAIL PROTECTED] 2003-08-29 18:26 --- No activity has been seen on this bug since 20030122 and it is in ASSIGNED state. This probably means that the information provided was not clear enough, or that some attention is needed. Please test and confirm that this bug is still valid with the latest cooker version. --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 06:41 --- hehe, appropriate comment from laurent ;-) (should have really closed the bug thoug) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Process to reproduce: = *Language English *under KDE *open KDE =Applications=development=development environments=idle (0.8) *to close this aplictaion, click on the cross Descriptions: = After opening this application, the window closed after few secondes. closing action is not immediately
[Cooker] [Bug 574] [KDE] XMMS main window opens on the wrong desktop in KDE
http://qa.mandrakesoft.com/show_bug.cgi?id=574 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||WONTFIX --- Additional Comments From [EMAIL PROTECTED] 2003-08-29 18:26 --- No activity has been seen on this bug since 20021127 and it is still in UNCONFIRMED state. This probably means that the information provided was not clear enough, or that the bug is not valid anymore. Please test and confirm that this bug is still valid with the latest cooker version, or close it. --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 06:45 --- this is a kde problem (if it still exists, head on over to bugs.kde.org) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I don't know exactly, if this is an xmms or a kde problem. Problem: I usually have xmms running on a desktop with a higher number (6 or 7 usually). If I leave xmms running and then quit kde, when I log in to kde the next time the main window of xmms will be opened on the first desktop. The playlist window will correctly appear on the desktop it was, when I logged out of kde. Reproduce: Open xmms on a desktop other than the first on. Log out of kde. Log into kde. Xmms main window will appear on the first desktop. Xmms playlist window will appear on the desktop it was when kde closed. System: kdebase-3.1-0.rc3.9mdk xmms-1.2.7-13mdk
[Cooker] [Bug 493] [gcombust] gcombust should be translated into french
http://qa.mandrakesoft.com/show_bug.cgi?id=493 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||INVALID --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 06:47 --- application 'bug', not for mandrake bugzilla -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: The french translation is uncomplete
[Cooker] [Bug 6301] [Bugzilla] Bug reports advised to enter on non-existing URL
http://qa.mandrakesoft.com/show_bug.cgi?id=6301 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEW Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-11-07 16:29 --- link should point to bugs.mandrakelinux.com, which is anthill for stable versions. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Trying to enter new bug on: http://qa.mandrakesoft.com/enter_bug.cgi MandrakeSoft Bugzilla Bugzilla version 2.17.4 Enter a new bug report reporter gets following warning: Warning : Bugzilla is for development version only (cooker), for any bug report on a stable version, please go to bugs.mandrakesoft.com However clicking on the link we get: Alert bugs.mandrakesoft.com could not be found. Please check the name and try again. Shows up both with Mozilla 1.5 and Konqueror 3.1.4. This error looks very nasty, like Mandrake does not want even hear about any bug related to stable (oh yes?) version like 9.2.
[Cooker] [Bug 6227] [Bugzilla] Bugzilla does not send mail anymore
http://qa.mandrakesoft.com/show_bug.cgi?id=6227 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-11-07 16:31 --- grrr even Mandrakesoft people file dupes ;-) *** This bug has been marked as a duplicate of 6226 *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description:
[Cooker] [Bug 6226] [Bugzilla] New: Bugzilla does not send mail anymore
http://qa.mandrakesoft.com/show_bug.cgi?id=6226 Summary: Bugzilla does not send mail anymore Product: Bugzilla Version: 2.17.4 Platform: PC OS/Version: All Status: NEW Severity: normal Priority: P2 Component: mail AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-11-07 16:31 --- *** Bug 6227 has been marked as a duplicate of this bug. *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 6309] [kdenetwork] Kdenetwork loses the network
http://qa.mandrakesoft.com/show_bug.cgi?id=6309 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED | Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-11-08 06:10 --- Upgrade to latest cooker. Bugs for stable versions can be reported at: bugs.mandrakelinux.com -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: creation_date: description: I am running the stock KDE installation as distributed in 9.2 Download. Machine is Athlon 2000+XP, Asus A7N266VM/AA, 512 megs of RAM. 2 drives, /swap and /home on the second drive. The problem is random loss of network connectivity for KDE apps, such as Konqueror, Kmail, and Kweather. At random times, they stop being able to find the network. At these times, Mozilla and ping can still find the network. Problem is resolved by logging out and back in. Everytime that I do a reboot, this problem occurs. I must logout of KDE and back in to have KDE find the network. Other times, the network connection, for KDE, stops. Quite infrequently, I get complete system freezes which necessitate hitting the reset button on the box. I consider that a Very Bad Thing®. Through no certain set of acts or conditions is the loss of connectivity, once KDE finds the network, reproducable. At least up until this point. I will advise if I can identify a cause.
[Cooker] [Bug 5321] [galeon] Problem managing bookmarks (drag to new folder)
http://qa.mandrakesoft.com/show_bug.cgi?id=5321 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||WONTFIX --- Additional Comments From [EMAIL PROTECTED] 2003-11-08 06:39 --- This bug is not mandrake specific. It is listed on the gnome bugzilla. (and has got 5 dupes already). link: http://bugzilla.gnome.org/show_bug.cgi?id=93234 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: In the bookmark editor, if you create a new folder, it is not possible to drag existing bookmark into the empty folder. The work-around is to create a new dummy bookmark in the empty folder so that it is no longer empty. After dropping existing bookmarks into the folder, the dummy bookmark can be removed.
[Cooker] [Bug 6176] [kdebase] A white line appear in konqueror
http://qa.mandrakesoft.com/show_bug.cgi?id=6176 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW | --- Additional Comments From [EMAIL PROTECTED] 2003-10-25 13:41 --- It is now very easy for me to reproduce this bug. It appears only if you are using Mandrake Galaxy theme. - Pay close attention to the line separating URL bar and page contents! It consists of a dark gray area and a light gray area. - Click inversely on page background and in URL bar. - when one of them gains focus, the line will grow one pixel. - Now scroll the web page upwards! The newly generated pixel will scroll along as a gray line on the page background. The same applies for the white line, except that you need to open a page with dark background to notice it. This time, the additional white 1-pixel line appears on the bottom of the web page (when either page contents or URL bar gains focus) and then remains as you scroll downwards. This appears to be a bug in Mandrake Galaxy. Please move this bug there. --- Additional Comments From [EMAIL PROTECTED] 2003-11-08 06:45 --- I haven't seen this bug since upgrading to kde 3.1.93 (3.2 beta1). Can others corroborate? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: creation_date: description: I have installed a Mandrake 9.2 I launch 2 konqueror (A and B). I have for example mplayer site with Konqueror A. If I click on Konqueror B, click on konqueror A and use my wheelmouse or my keyboard to scroll mplayer site on konqueror A, a white line appears on the page. You can see my bug here: http://www.priap.com/mandrake/bug.jpg I have not this bug with Mozilla and I hadn't it with Mandrake 9.1 I have a Nvidia GeForce 4 MX 420 PCI and the bug appears with both nvidia driver and nv driver. I have this bug with all the sites, not only mplayer ! I can give more details on my problem but only in french ! My english is too weak.
[Cooker] [Bug 3417] [drakconf] Cosmetic: top of seperator does not match bottom
http://qa.mandrakesoft.com/show_bug.cgi?id=3417 --- Additional Comments From [EMAIL PROTECTED] 2003-11-08 06:47 --- Hello? why doesn't someone from mandrake apply this fix. If you're rejecting at least say so, then contributers won't be kept in limbo. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: If you compare the bottom of the seperator that devides DrakConf w/ the top you will see that the top looks incomplete. Its white. I will provice a screenshot.
[Cooker] [Bug 3390] [Bugzilla] unconfirmed - needinfo changes bug to assigned
http://qa.mandrakesoft.com/show_bug.cgi?id=3390 [EMAIL PROTECTED] changed: What|Removed |Added Platform||All --- Additional Comments From [EMAIL PROTECTED] 2003-11-08 07:06 --- New behaviour of this bug: Now when I change status to Needinfo the status goes blank. Is this going to be looked at? (See bug 6309 for an occurrence) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I've tried to change a bug to needinfo from unconfirmed twice. Both times it has changed it to assigned. See bug 3130 and bug 2786. I'm not crazy, I really did check the correct box, and even retried a few times on 3130.
[Cooker] [Bug 6309] [kdenetwork] Kdenetwork loses the network
http://qa.mandrakesoft.com/show_bug.cgi?id=6309 --- Additional Comments From [EMAIL PROTECTED] 2003-11-08 07:09 --- Please note that the status of this bug was changed to needinfo. But there is a problem with this feature in bugzilla, see bug 3390 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: creation_date: description: I am running the stock KDE installation as distributed in 9.2 Download. Machine is Athlon 2000+XP, Asus A7N266VM/AA, 512 megs of RAM. 2 drives, /swap and /home on the second drive. The problem is random loss of network connectivity for KDE apps, such as Konqueror, Kmail, and Kweather. At random times, they stop being able to find the network. At these times, Mozilla and ping can still find the network. Problem is resolved by logging out and back in. Everytime that I do a reboot, this problem occurs. I must logout of KDE and back in to have KDE find the network. Other times, the network connection, for KDE, stops. Quite infrequently, I get complete system freezes which necessitate hitting the reset button on the box. I consider that a Very Bad Thing®. Through no certain set of acts or conditions is the loss of connectivity, once KDE finds the network, reproducable. At least up until this point. I will advise if I can identify a cause.
[Cooker] [Bug 6235] [GConf2] GConf2-2.4.0.1-1.1.92 and gnucash
http://qa.mandrakesoft.com/show_bug.cgi?id=6235 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-10-26 21:43 --- *** This bug has been marked as a duplicate of 6231 *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: In MDK 9.2 I updated GConf2 package from update source (2.4.0.1-1 to 2.4.0.1-1.1.92), but from this point I can't use 'gnucash' any more. When I open my file with gnucash I get the following error: gtkhtml-ERROR **: gconf error: Failed to contact configuration server (a likely cause of this is that you have an existing configuration server (gconfd) running, but it isn't reachable from here - if you're logged in from two machines at once, you may need to enable TCP networking for ORBit) aborting... Aborted Beside accounts I have also several reports in my financial file. So I tried to downgrade GConf2 to previous version, and now 'gnucash' works again. In my opinion there is a problem with updated GConf2 package (2.4.0.1-1.1.92)
[Cooker] [Bug 6231] [GConf] gnucash crashes with new gconf
http://qa.mandrakesoft.com/show_bug.cgi?id=6231 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-10-26 21:43 --- *** Bug 6235 has been marked as a duplicate of this bug. *** -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: After updating to GConf-1.0.9-12mdk.i586 GConf2-2.4.0.1-2mdk.i586 libGConf1-1.0.9-12mdk.i586 libGConf2_4-2.4.0.1-2mdk.i586 libGConf2_4-devel-2.4.0.1-2mdk.i586 gnucash no longer starts, it complains that gtkhtml cannot connect to gconfd. One maybe has to open a report to trigger this? My gnucash opens some reports upon start. After downgrading to previous (9.2) GConf stuff and relogin, gnucash works again.
[Cooker] [Bug 6176] [kdebase] A white line appear in konqueror
http://qa.mandrakesoft.com/show_bug.cgi?id=6176 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEW Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-20-10 21:02 --- Same problem here. In my experience this has nothing to do with mplayer, and is simply a konqueror bug. My graphic card: NVidia Riva128 screenshot (of browsing the screenshot of the bug author) with additional white lines here: http://www.pantropy.net/linux/snapshot1.png Note that the lines do not have to be white. I've experienced grey lines while scrolling pages with a white background. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I have installed a Mandrake 9.2 I launch 2 konqueror (A and B). I have for example mplayer site with Konqueror A. If I click on Konqueror B, click on konqueror A and use my wheelmouse or my keyboard to scroll mplayer site on konqueror A, a white line appears on the page. You can see my bug here: http://www.priap.com/mandrake/bug.jpg I have not this bug with Mozilla and I hadn't it with Mandrake 9.1 I have a Nvidia GeForce 4 MX 420 PCI and the bug appears with both nvidia driver and nv driver. I have this bug with all the sites, not only mplayer ! I can give more details on my problem but only in french ! My english is too weak.
[Cooker] [Bug 2384] [sodipodi] fonts not working in sodipodi
http://qa.mandrakesoft.com/show_bug.cgi?id=2384 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-29-08 18:26 --- No activity has been seen on this bug since 20030225 and it is still in UNCONFIRMED state. This probably means that the information provided was not clear enough, or that the bug is not valid anymore. Please test and confirm that this bug is still valid with the latest cooker version, or close it. --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 04:36 --- works now, cool. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: There are square boxes in stead of letters both in the about sodipodi section and when inserting text into a picture. When starting sodipodi and opening about sodipodi I get the following out put: --- [EMAIL PROTECTED] sasch]$ sodipodi warning: failed to load external entity glade/icons.svg File /home/sasch/.sodipodi/private-fonts does not exist x_order_2: colinear! x_order_2: colinear! colinear! colinear! (and a whole bunch more x_order_2: colinear! and colinear! errors) - Here's a list of files in my ~/.sodipodi/ directory: [EMAIL PROTECTED] .sodipodi]$ ls extensions preferences Thanks
[Cooker] [Bug 5375] [rpmdrake] rpmdrake in 9.2 rc1 still says 9.1
http://qa.mandrakesoft.com/show_bug.cgi?id=5375 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||WORKSFORME --- Additional Comments From [EMAIL PROTECTED] 2003-08-09 01:33 --- Works for me with latest cooker -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Just upgraded from Mandrake 9.1 to 9.2 RC 1. Open up rpmdrake and it still has 9.1 as the title.
[Cooker] [Bug 4708] [kdebase] Kprinter : Print a document to PDF doesn't work
http://qa.mandrakesoft.com/show_bug.cgi?id=4708 --- Additional Comments From [EMAIL PROTECTED] 2003-06-09 18:57 --- works for me on latest cooker -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Tester : Gregory Step to reproduce = Start kwriter, create a document and enter a text, click on the icon Printing, in the new screen choose for the name of the printer the option Print in a PDF and click on Print Problem : Kprinter create the PDF file but this PDF is empty, and during the generation of the file you have this error : Un problème est survenu. Le message d'erreur émis par le système est : gs -q -dSAFER -dNOPAUSE -dBATCH -sDEVICE=pdfwrite -sOutputFile='/home/a/print.pdf' -sPAPERSIZE=a4 -c .setpdfwrite -f '/tmp/kde-a/kprinter_6075' : exécution arrêtée avec le message : Error: /undefinedfilenam in (.setpdfwrite Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stop ed_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push --nostringval-- --nostringval-- D ctionary stack: --dict:1052/1123(ro)(G)-- --dict:0/20(G)-- --dict:68/200(L)-- Current allocation mode is local Last OS e ror: 2 ESP Ghostscript 7.07. : Unrecoverable error, exit code 1
[Cooker] [Bug 4971] [kdebase] RC1 - logout from KDE does not return you to mdkkdm or kdm
http://qa.mandrakesoft.com/show_bug.cgi?id=4971 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-07-09 01:09 --- WFM in kdebase-kdm-3.1.3-69 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: Clean install of RC1, set to boot to graphical login with mdkkdm. When logging out from KDE, instead of returning to the graphical login, a text login is displayed. Logging in in text mode and then typing startx does start kde back up. This also happens with the regular kdm, too. For either one, switching to another tty session and issuing a session -f dm as root causes the dm to display again.
[Cooker] [Bug 5344] [Installation] Post-install Update
http://qa.mandrakesoft.com/show_bug.cgi?id=5344 --- Additional Comments From [EMAIL PROTECTED] 2003-07-09 03:30 --- On Saturday 06 September 2003 09:15 pm, [tbutler] wrote: Is it not the case that there simply are no updates for 9.2rc(x) yet because it is not a final release? Best, Sascha Noyes -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When, after configuration, the installer prompts to look for updates, nothing ever happens. It pauses for a few moments and then moves on to the end of the installation. In 9.1, I first thought this was because there weren't any updates, but just the other day I did a 9.1 install and it still was doing it. Likewise, the same thing happens in 9.2 rc 1. This is happening on a LAN internet connection that has been properly detected. Like I said, no feedback is provided.
[Cooker] [Bug 3492] [Installation] Mandrake Linux 9.1 RC2 hangs during install of package makedev
http://qa.mandrakesoft.com/show_bug.cgi?id=3492 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-04-06 04:35 --- closed as per comments of author --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Hardware is Athlon-2100, 512 Meg ram, Gigabyte GA-7VAXP mobo. There are 2 IDE drives attached to the primary IDE controller, 2 CD drives attached to the secondary IDE. There is an Adaptec 2100S RAID device set up as RAID-5 and on /dev/sda. The installation hangs during install of package makedev; this is observed by using the details button. I tried rebooting off the RC2 install CD and using rescue mode, but it was unable to mount any partitions at all other than /boot, which seems to be empty. Mandrake version 9.0 has run on this machine although with partitions set up differently. The partitions are as follows: hda1 /boot25 MByte ext2 hda5 /350 MByte JFS hda6 /proj1 28 Gbyte JFS hdb1 SWAP 1 Gbyte hdb5 /var 2.9 GByte JFS hdb6 /proj2 24 GByte JFS sda1 /usr 4.8 GByte JFS sda5 /opt 1.9 GByte JFS sda6 /home9.5 GByte JFS sda7 /proj3 9.2 GByte JFS
[Cooker] [Bug 3660] [Hardware] Hardware compatibility Report
http://qa.mandrakesoft.com/show_bug.cgi?id=3660 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE Summary|Hardware compatibility |Hardware compatibility |Report |Report --- Additional Comments From [EMAIL PROTECTED] 2003-04-05 08:54 --- *** This bug has been marked as a duplicate of 3643 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: As any one and their mother might guess Microsoft(R) PCI Adapter MN-130 - Packet Scheduler Miniport @ 100.0 Mbps network adapter is incompatible with mandrake 9.1 (and probably all) linux versions.
[Cooker] [Bug 3643] [Hardware] Hardware compatibility Report
http://qa.mandrakesoft.com/show_bug.cgi?id=3643 --- Additional Comments From [EMAIL PROTECTED] 2003-04-05 08:54 --- *** Bug 3660 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: As any one and their mother might guess Microsoft(R) PCI Adapter MN-130 - Packet Scheduler Miniport @ 100.0 Mbps network adapter is incompatible with mandrake 9.1 (and probably all) linux versions.
[Cooker] [Bug 3643] [Hardware] Hardware compatibility Report
http://qa.mandrakesoft.com/show_bug.cgi?id=3643 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||INVALID Summary|Hardware compatibility |Hardware compatibility |Report |Report --- Additional Comments From [EMAIL PROTECTED] 2003-04-03 07:43 --- This is a bug reporting tool, not hardware compatability. I suggest asking on cooker how one may contribute hardware compatability information. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: As any one and their mother might guess Microsoft(R) PCI Adapter MN-130 - Packet Scheduler Miniport @ 100.0 Mbps network adapter is incompatible with mandrake 9.1 (and probably all) linux versions.
[Cooker] [Bug 3606] [kernel-source] kernel has too many patches, should be closer to standard kernel
http://qa.mandrakesoft.com/show_bug.cgi?id=3606 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||INVALID --- Additional Comments From [EMAIL PROTECTED] 2003-03-30 22:52 --- As you said, this is not a bug. Please discuss issues like this on cooker. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I know this is not a Real bug report, but I'm starting to get very unsure of the kernel source supplied with mandrake. I know this kernel has hundreds of patches added to it that are not in the main tree. Although I understand the need to support lots of hardware (I know I've got some difficult stuff) I'm sure it is very wrong to do it like this (lots of patches on top of pre releases of the next kernel). A solution would be to get an Alan Cox to work for/with mandrake as a lieutenant for Linux Torvalds or Marcelo or both. That way people will trust these kernels and they will be tested very thoroughly. As it is now, whenever there's a kernel bug, you couldn't possibly have the manpower/knowledge to find the source of it in the big pile of patches you have included. Getting an Alan and having him as a trusted part of the kernel community will probably take years, unless you get Alan himself ;-), but it'll be worth it!
[Cooker] [Bug 3591] [knights-themepack] New: Sumary spelling error
http://qa.mandrakesoft.com/show_bug.cgi?id=3591 Product: knights-themepack Component: packaging Summary: Sumary spelling error Version: 0.5.6-3mdk Platform: Other OS/Version: All Status: NEW Severity: minor Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] The summary of this package is given as Knights thmes, it should of course be Knights themes --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 3499] [suspend-scripts] Problem with pmsuspend when using a usbmouse
http://qa.mandrakesoft.com/show_bug.cgi?id=3499 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEW Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-03-23 00:49 --- I have experienced exactly the same problems that neutrolio noted above. Compaq Presario 732US. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I've noticed a problem when I tried to suspend the system using omsuspend. I have to make it twice since in the first time it outputs a message mentionig the usb.c file (not much more) If I run it again it works well. When I restart everting works except the sound. I' ve tried to change the /etc/sysconfig/suspend changing the option: USB_RESTART from no to yes. Now pmsuspend works at first attempt, but when restarting usb mouse does not works. Good luck. My computer: compaq presario 710 EA Mouse: logutech cordless mouse (usb)
[Cooker] [Bug 3488] [kernel] acpi in presario 700
http://qa.mandrakesoft.com/show_bug.cgi?id=3488 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |ASSIGNED Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-03-22 02:16 --- Have a look at http://individual.utoronto.ca/noyes/projects/laptop/tuxtop.html This should work. Also, please give the exact model number of you laptop (look at the bottom). Please notify if the procedure on the webpage does not work. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: acpi doesn't work. If I remove acpi=off OR I put acpi = on on lilo.conf the computer just after booting. Loading linux. BeOS I've tried to recompile the kernel but it doesn't work. The path should be /proc/acpi, but it is only /proc. The directories created in /proc, that is ac_adapter, battery, button, and so on are empty. Sugestion: use acpi drivers from sf.net/projects/acpi - they work just fine. The only way of use acpi in my laptop is getting the original kernel source, the apply the acpi patch in at http://sf.net/projects/acpi. Because of that I've to spend much time I loose supermount from Mandrake. The procedure above works on every laptops whose persons I've helped to install linux (laptops with acpi) Good luck!
[Cooker] [Bug 3469] [Bugzilla] multiple categories for certain items
http://qa.mandrakesoft.com/show_bug.cgi?id=3469 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-20 18:53 --- *** This bug has been marked as a duplicate of 877 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When voting for a bug, it may be presented multiple times because of capitalization differences. This occurs when it belongs to Bugzilla/bugzilla or DrakTools (if I remember correctly -- I can guarantee the first case, but I no longer have a bug vote in the latter). Basically, this forces the user to uncheck one of the two occurences. Otherwise, there is an error to the effect of you can only vote for a bug once; you are trying to vote 11 times (note the string append instead of mathematical addition). This is particularly trying when voting for a new bug: you must also remember to look for and uncheck one and only one of each pair of your old votes.
[Cooker] [Bug 877] [Bugzilla] Two drakconf entries
http://qa.mandrakesoft.com/show_bug.cgi?id=877 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-03-20 18:53 --- *** Bug 3469 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: There are two entries for drakconf (drakconf DrakConf). When one votes for a bug that is listed under drakconf, then there is also a check-box for the same bug under DrakConf. If one then Modifies one's votes with both boxes checked you get the following error: ¨You may only use at most 1 votes for bugs in the drakconf product, but you are trying to use 11.¨
[Cooker] [Bug 2582] [kdebase] Restart computer only goes to command prompt
http://qa.mandrakesoft.com/show_bug.cgi?id=2582 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-19 05:07 --- search before posting!!! *** This bug has been marked as a duplicate of 2399 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: 9.1 RC1 - From a KDE desktop, attempted to restart the computer via the KDE menu. GUI disappears, but I'm left at a text prompt. Had to manually issue a reboot command to do the job.
[Cooker] [Bug 2399] [mdkkdm] option restart doesn't restart, but leaves console in a mess
http://qa.mandrakesoft.com/show_bug.cgi?id=2399 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-03-19 05:07 --- *** Bug 2582 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When I choose restart from the mdkkdm, I get garbage on my screen (see URL for hardware description). Also the machine doesn't restart. Halt does seem to work. I'm not using the nVidia drivers or a custom kernel on this machine (yet). In the garbaged situation I can login and restart (blind of course) using the reboot command.
[Cooker] [Bug 3443] [Bugzilla] New: alphabetic order of mandrake tools
http://qa.mandrakesoft.com/show_bug.cgi?id=3443 Product: Bugzilla Component: Bugzilla Summary: alphabetic order of mandrake tools Version: 2.17 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] On the query bugs page the list of Mandrake tools is not sorted alphabetically. This should be changed. (It is correctly displayed on the enter new bug page) --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 3408] [drakxtools] printerdrake launches scannerdrake too !
http://qa.mandrakesoft.com/show_bug.cgi?id=3408 --- Additional Comments From [EMAIL PROTECTED] 2003-03-17 23:42 --- please supply your printer model specifications. Could it be that your printer has built in scanning capabilities? --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: when i launch printerdrake from control center, starting printerdrake AND starting scannerdrake appears in the info console. The second line appears only when it has finished to configure defaut printer and apps. 22:36:38 printerdrake[31808]: ### Program is starting ### 22:37:06 scannerdrake[32029]: ### Program is starting ###
[Cooker] [Bug 1942] [drakxtools] Configuration of wireless NICS
http://qa.mandrakesoft.com/show_bug.cgi?id=1942 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-17 23:45 --- *** This bug has been marked as a duplicate of 1881 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When going through the drakconnect wizard on laptops (IBM T21 and T30) with an wireless nic + a buildin ehternet card, everything worx during configuration. However When you get back to the drakconnect start screen in the mandrake control center, if i click Ok the wireless eth1 configuration get flushed and i wind up with only the original eth0 configuration for the ethernet card. When i instead, back in the drakconnect start screen, click cancel, both configurations are retained :) Minor bug but some wont figure it out ;) By the way ACPI worx flawless on an IBM T30 laptop
[Cooker] [Bug 1881] [drakxtools] Configuration corrupted on exiting Drakconnect GUI
http://qa.mandrakesoft.com/show_bug.cgi?id=1881 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-03-17 23:45 --- *** Bug 1942 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: 9.1RC1 Example failure scenario :- /etc/sysconfig/network-scripts/ifcfg-eth0 is set up for an pcmcia Ethernet card, but the user is replacing the Ethernet card with a wireless card. The user starts mcc and selects the networking GUI. The user presses the 'Wizard' button and goes through drakconnect to set up the wireless card parameters. On pressing 'Finish' to exit the wizard the new parameters are used to set up the card, and it starts working. The user then presses 'OK' in the networking GUI, and the original contents of ifcfg-eth0 are then written back again and the card stops working. The user has to exit the GUI with 'Cancel' in order to retain the modified contents of ifcfg-eth0. This is obviously not very intuitive.
[Cooker] [Bug 3417] [drakconf] Cosmetic: top of seperator does not match bottom
http://qa.mandrakesoft.com/show_bug.cgi?id=3417 [EMAIL PROTECTED] changed: What|Removed |Added Severity|normal |minor Status|UNCONFIRMED |NEW Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-03-18 01:17 --- confirming, changing to lower severity --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: If you compare the bottom of the seperator that devides DrakConf w/ the top you will see that the top looks incomplete. Its white. I will provice a screenshot.
[Cooker] [Bug 3415] [drakxtools] Erroneous close of rpmdrake (crash?) related to drakxtools
http://qa.mandrakesoft.com/show_bug.cgi?id=3415 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEW Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-03-18 01:23 --- I can confirm as well - with all programs that are launched unembedded when MCC is in embedded mode (other one is console). --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: rpmdrake window disappears when working with drakxtools. Steps to reproduce. 1. Launch MCC 2. Select rpmdrake (Software management / Add software) 3. While rpmdrake is open, go back to the MCC 4. Select Security / msec, open msec (embedded). 5. Close msec (Close button). rpmdrake disappers, probably crashes. Running on today's Cooker (probably what will go in 9.1).
[Cooker] [Bug 1852] [drakconf] LAN Configuration
http://qa.mandrakesoft.com/show_bug.cgi?id=1852 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-18 01:32 --- *** This bug has been marked as a duplicate of 416 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When I make some changes in LAN configuration and push Apply, all setings goes to the previous state - nothing is happens. For example - I try to configure my network from static IP addres to DHCP, I run Network Wizard, all seting are done, and I can connect to Internet, but when I push apply - all setings are still in previous static parameters.
[Cooker] [Bug 416] [drakconf] MCC network wizard - doesn't configure cards correctly
http://qa.mandrakesoft.com/show_bug.cgi?id=416 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-03-18 01:32 --- *** Bug 1852 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I have a wireless network card for my laptop. I didn't not install it from the installation but waited until the OS came up before configuring it. Launched MCC, selected network wizard. This successfully detected my card and my modem. I selected to configure my wireless card. The wireless configuration screen was displayed. I entered my details for ESSID and WEP Key (As an aside why doesn't it display the two format types that the key can be entered in - a new person will wonder why they can't configure the card correctly if they enter the key as a string instead of a hex sequence). The wizard does it's configuration and the network can be seen, the finish wizard page is shown. When you press the finish button it overwrites /etc/sysconfig/network-scripts/ifet0-cfg file with one which does not contain the wireless information. Hence, when it goes back to main network menu the network fails as it issues a restart along the way. The frig is to copy the ifeth0-cfg file before pressing the finish button, and then copy it back after closing MCC, and then re-issue the ifup eth0
[Cooker] [Bug 878] [Bugzilla] Voting on multiple bugs in one 'product' impossible
http://qa.mandrakesoft.com/show_bug.cgi?id=878 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-03-18 01:48 --- fixed, thanks Warly --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Voting for multiple bugs (in this case two) that appear in the same 'product' (in this case drakconf) is not possible. Bugzilla gives the error message: ¨You may only use at most 1 votes for bugs in the drakconf product, but you are trying to use 2.¨ I´m trying to vote for both bug 770 805.
[Cooker] [Bug 3420] [draksync] Draksync displays warnings (but still works)
http://qa.mandrakesoft.com/show_bug.cgi?id=3420 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-18 01:53 --- Do not post duplicate bug reports! *** This bug has been marked as a duplicate of 3419 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I have been using it to sync my Zaurus. I get the following message repeated over and over: ** CRITICAL **: file eazel-theme-pixmaps.c: line 417 (eazel_engine_image_render): assertion `width 0' failed. warning: unref'ing unknown image in pixmap-cache The sync still works, but it is much slower as a result. Also, I get the feeling that the progress bar is not what it should be. I am using the the latest version of python and draksync from the cooker mirrors. Also, the about box displays version 8.
[Cooker] [Bug 3419] [draksync] Draksync displays warnings (but still works)
http://qa.mandrakesoft.com/show_bug.cgi?id=3419 --- Additional Comments From [EMAIL PROTECTED] 2003-03-18 01:53 --- *** Bug 3420 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I have been using it to sync my Zaurus. I get the following message repeated over and over: ** CRITICAL **: file eazel-theme-pixmaps.c: line 417 (eazel_engine_image_render): assertion `width 0' failed. warning: unref'ing unknown image in pixmap-cache The sync still works, but it is much slower as a result. Also, I get the feeling that the progress bar is not what it should be. I am using the the latest version of python and draksync from the cooker mirrors. Also, the about box displays version 8.
[Cooker] [Bug 2716] [usermode] can't halt system when logging out of gnome
http://qa.mandrakesoft.com/show_bug.cgi?id=2716 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-03-17 01:25 --- marking fixed as per comments of original author --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When I log out of gnome after selecting Halt in the logout menu, a Unknown error message box appears. How can I give you more details so this error can be fixed ? Olivier
[Cooker] [Bug 3379] [OpenOffice.org] open office.org doesn't launch
http://qa.mandrakesoft.com/show_bug.cgi?id=3379 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-17 05:09 --- search before reporting new bugs! *** This bug has been marked as a duplicate of 2786 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: open office doesn't lauch. It just tires to start but then nothing happens. this is with 9.1rc2
[Cooker] [Bug 2786] [OpenOffice.org] Crash on start
http://qa.mandrakesoft.com/show_bug.cgi?id=2786 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-03-17 05:09 --- *** Bug 3379 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: It´s impossible to run OpenOffice.org in RC2. System: Celeron 1200, 512MB, SCSI, czech locales
[Cooker] [Bug 3390] [Bugzilla] New: unconfirmed - needinfo changes bug to assigned
http://qa.mandrakesoft.com/show_bug.cgi?id=3390 Product: Bugzilla Component: Bugzilla Summary: unconfirmed - needinfo changes bug to assigned Version: 2.17 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I've tried to change a bug to needinfo from unconfirmed twice. Both times it has changed it to assigned. See bug 3130 and bug 2786. I'm not crazy, I really did check the correct box, and even retried a few times on 3130. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 3391] [Bugzilla] New: make bugzilla users search before posting new bug
http://qa.mandrakesoft.com/show_bug.cgi?id=3391 Product: Bugzilla Component: Bugzilla Summary: make bugzilla users search before posting new bug Version: 2.17 Platform: Other OS/Version: All Status: NEW Severity: enhancement Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] Is it perhaps possible to force users to search for a bug before posting a new one like it is done on the kde bugzilla. This would cut down on the number of duplicates. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 3322] [kdebase] Konqueror is refreshing forever the display vieweing a home directory
http://qa.mandrakesoft.com/show_bug.cgi?id=3322 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-14 18:46 --- please search for bugs before submitting new ones! *** This bug has been marked as a duplicate of 2702 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Mandrake 9.1 - RC2 i386 logged as non-root user with KDE after creating some files in my home directory, when opening it with Konqueror I get a continous refreshing of files in the view, the wheel is rotating forever and the files are flickering wile refreshing contents
[Cooker] [Bug 2702] [kdebase] konqueror file manager
http://qa.mandrakesoft.com/show_bug.cgi?id=2702 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-03-14 18:46 --- *** Bug 3322 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: In Mandrake 9.1 RC-2 default install, Clicking on konqueror file manager then clicking on show hidden files results in a fonts.cache loop creating many 0 btye temp files in the home/username directory.
[Cooker] [Bug 2745] [indexhtml] index.html not found after upgrade
http://qa.mandrakesoft.com/show_bug.cgi?id=2745 --- Additional Comments From [EMAIL PROTECTED] 2003-03-15 01:22 --- Eric: read Frederic Crozat's comment again, a simple update won't do. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I just upgraded 9.1rc1 to rc2 and this file is not there anymore
[Cooker] [Bug 1813] [galaxy-kde] pb in konqueror
http://qa.mandrakesoft.com/show_bug.cgi?id=1813 [EMAIL PROTECTED] changed: What|Removed |Added Status|REOPENED|RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 19:10 --- fixed for a while now --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Language French Under KDE konqueror has problems with buttons : for instance, go to bugzilla, you will see that it lacks buttons. It's not a bugzilla pb because i checked that with mozilla, every buttons are there. The scrollbar, in konqueror , doesn't visible clearly.
[Cooker] [Bug 3270] [kdebase] Konqueror spellchecking
http://qa.mandrakesoft.com/show_bug.cgi?id=3270 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEW Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 19:37 --- yip, I can confirm in latest cooker also. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: In MDK 9.1RC2 Spellchecked text in Konqueror (in a textarea) is not highlighted (like in Kmail).
[Cooker] [Bug 3253] [ldconfig] ldconfig doesn't follow stipulated search order for libraries
http://qa.mandrakesoft.com/show_bug.cgi?id=3253 --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 19:42 --- *** Bug 3264 has been marked as a duplicate of this bug. *** --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 19:42 --- *** Bug 3274 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I've been running a bug report as bug #3159, and apparently I chose the wrong package so I'll recap that report: This is my understanding of ldconfig: During run-time the program should check LD_LIBRARY_PATH, /etc/ld.so.cache and default libs. 'ldconfig' is used to update the cache using LD_LIBRARY_PATH, /etc/ld.so.conf and default libs as the search order. 'ldconfig -p' shows what's in the cache and in what order the libraries are referenced, so if /usr/lib/libmylib.so comes before /usr/local/lib/libmylib.so the former is used at runtime. This is the bug: When I run 'ldconfig -p | grep libfreetype' I get (in order) libfreetype.so (libc6) = /usr/lib/libfreetype.so.6 libfreetype.so (libc6) = /usr/local/lib/libfreetype.so.6 and 'ldd /opt/xfce4_cvs26feb/bin/xfwm4 | grep freetype' gives libfreetype.so.6 = /usr/lib/libfreetype.so.6 So even though my ld.so.conf has /usr/local/lib first ldconfig and the linker ignores it and chooses the default lib instead. This behaviour appeared somewhere between MDK-7.0 and 8.2 and is till there in 9.1rc2 (well I haven't reported it before and apparently noone else seems to be bugged about it, but I really like to upgrade some libs myself and not use the cooker libs.) Peder
[Cooker] [Bug 2755] [kdebase] Single and double click inconsistency
http://qa.mandrakesoft.com/show_bug.cgi?id=2755 --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 19:51 --- I can't reproduce this bug, please check if it is still valid --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: After the last update (kdebase-3.1-71mdk,kdelibs-3.1-51mdk ..), the Open file dialog needs double clicking on directories to open them, even when everything else works with single click. This didn't happen before. To reproduce : Open kwrite, click File-Open and try to click on some directories - you have to click twice, even when control center is set for just single click.
[Cooker] [Bug 3274] [ldconfig] ldconfig doesn't follow stipulated search order for libraries
http://qa.mandrakesoft.com/show_bug.cgi?id=3274 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 19:41 --- don't post the same bug multiple times *** This bug has been marked as a duplicate of 3253 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I've been running a bug report as bug #3159, and apparently I chose the wrong package so I'll recap that report: This is my understanding of ldconfig: During run-time the program should check LD_LIBRARY_PATH, /etc/ld.so.cache and default libs. 'ldconfig' is used to update the cache using LD_LIBRARY_PATH, /etc/ld.so.conf and default libs as the search order. 'ldconfig -p' shows what's in the cache and in what order the libraries are referenced, so if /usr/lib/libmylib.so comes before /usr/local/lib/libmylib.so the former is used at runtime. This is the bug: When I run 'ldconfig -p | grep libfreetype' I get (in order) libfreetype.so (libc6) = /usr/lib/libfreetype.so.6 libfreetype.so (libc6) = /usr/local/lib/libfreetype.so.6 and 'ldd /opt/xfce4_cvs26feb/bin/xfwm4 | grep freetype' gives libfreetype.so.6 = /usr/lib/libfreetype.so.6 So even though my ld.so.conf has /usr/local/lib first ldconfig and the linker ignores it and chooses the default lib instead. This behaviour appeared somewhere between MDK-7.0 and 8.2 and is till there in 9.1rc2 (well I haven't reported it before and apparently noone else seems to be bugged about it, but I really like to upgrade some libs myself and not use the cooker libs.) Peder
[Cooker] [Bug 3264] [ldconfig] ldconfig doesn't follow stipulated search order for libraries
http://qa.mandrakesoft.com/show_bug.cgi?id=3264 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 19:41 --- don't post the same bug multiple times *** This bug has been marked as a duplicate of 3253 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I've been running a bug report as bug #3159, and apparently I chose the wrong package so I'll recap that report: This is my understanding of ldconfig: During run-time the program should check LD_LIBRARY_PATH, /etc/ld.so.cache and default libs. 'ldconfig' is used to update the cache using LD_LIBRARY_PATH, /etc/ld.so.conf and default libs as the search order. 'ldconfig -p' shows what's in the cache and in what order the libraries are referenced, so if /usr/lib/libmylib.so comes before /usr/local/lib/libmylib.so the former is used at runtime. This is the bug: When I run 'ldconfig -p | grep libfreetype' I get (in order) libfreetype.so (libc6) = /usr/lib/libfreetype.so.6 libfreetype.so (libc6) = /usr/local/lib/libfreetype.so.6 and 'ldd /opt/xfce4_cvs26feb/bin/xfwm4 | grep freetype' gives libfreetype.so.6 = /usr/lib/libfreetype.so.6 So even though my ld.so.conf has /usr/local/lib first ldconfig and the linker ignores it and chooses the default lib instead. This behaviour appeared somewhere between MDK-7.0 and 8.2 and is till there in 9.1rc2 (well I haven't reported it before and apparently noone else seems to be bugged about it, but I really like to upgrade some libs myself and not use the cooker libs.) Peder
[Cooker] [Bug 3130] [drakxtools] Problem in identify my TV card
http://qa.mandrakesoft.com/show_bug.cgi?id=3130 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |ASSIGNED Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 20:35 --- needmoreinfo as per TVignaud --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: It cannot identify my hauppauge WinTV card with BT878 and Philip tunner in rc1 and rc2. Also the xawtv cannot detect my cable TV channel. It my connect to the reason the Drake tool cannot setup BT878 and Philip tunner. thanks. JC
[Cooker] [Bug 3130] [drakxtools] Problem in identify my TV card
http://qa.mandrakesoft.com/show_bug.cgi?id=3130 --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 20:46 --- This is strange - It must be a bug with bugzilla - I can't change the status of this bug to needinfo. (I tried twice. Once when it was unconfirmed, and it changed the bug to assigned. And once when it was assigned, but that didn't change anything. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: It cannot identify my hauppauge WinTV card with BT878 and Philip tunner in rc1 and rc2. Also the xawtv cannot detect my cable TV channel. It my connect to the reason the Drake tool cannot setup BT878 and Philip tunner. thanks. JC
[Cooker] [Bug 3130] [drakxtools] Problem in identify my TV card
http://qa.mandrakesoft.com/show_bug.cgi?id=3130 --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 20:41 --- oops, here's what I intended.. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: It cannot identify my hauppauge WinTV card with BT878 and Philip tunner in rc1 and rc2. Also the xawtv cannot detect my cable TV channel. It my connect to the reason the Drake tool cannot setup BT878 and Philip tunner. thanks. JC
[Cooker] [Bug 3243] [kdebase] konqueror --profile webbrowsing points to file that doesnt exist
http://qa.mandrakesoft.com/show_bug.cgi?id=3243 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEW Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 21:08 --- I can confirm. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When you start konqueror from the KDE menu, the actual command that it executes is konqueror --profile webbrowsing Using the webbrowsing profile means that Konqueror opens and displays the webpage: View0_URL=file:/usr/share/doc/HTML/index.html when it starts up. The problem is that this file doesnt exist. The package indexhtml-9.1-7mdk provides the index.html file in a different path. The webbrowsing profile needs to be updated to reflect the path of the index.html file as provided by the indexhtml package. As of indexhtml-9.1-7mdk, the correct path to index.html is /usr/share/mdk/indexhtml/index.html
[Cooker] [Bug 3098] [KDE] [9.1 rc2] konqueror hide some form buttons
http://qa.mandrakesoft.com/show_bug.cgi?id=3098 --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 21:10 --- -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 13 March 2003 14:56, jerome.bouat wrote: you won't be able to update your cooker installation with an update source, as they only carry security updates for stable releases. That said, you basically have to have broadband if you want to update your RC to the latest cooker. visit http://plf.zarb.org/~nanardon/index.php for instructions on how add an ftp cooker source. Then do (as root) urpmi.update -a, and then urpmi - --auto-select Best, Sascha Noyes - -- Please encrypt all correspondence. PGP key available from: http://individual.utoronto.ca/noyes/snoyes.asc - -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+cOV8gzJdfX+cTW8RAvAcAKCXh2P2N2Fm7oGxWB2M0Z3hCQ9XbQCeItr3 ugxTeTY8nx6KgLdfhuzUtF4= =xUnd -END PGP SIGNATURE- --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: On the URL given (not only this URL) the Login button does not appear.
[Cooker] [Bug 1953] [drakconf] Internet Connection Sharing
http://qa.mandrakesoft.com/show_bug.cgi?id=1953 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-03-14 06:27 --- fixed as per statement of original author --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I tried to enable Internet Connection Sharing which worked under 9.1 Beta 1 and 2. Afterward, the internet connection wasn't shared so I went and tried to reconfigure. It said that Internet Connection Sharing had been configured but was currently disabled. So I told it to reenable. Still the same results. No matter how many times I tried, it still said that internet connection sharing was disabled. My feeling was that this was a problem with shorewall, so I went to the Firewall Wizard, and sure enough the wizard said that the firewall was blocking nothing. So I tried to tell it to block everything. Still no internet connection sharing, so I go and check the firewall settings in the wizard again--it says nothing is blocked. Regardless of how many times I tell it to block everything, it says nothing is blocked. This RC 1 seems to have more bugs than the original beta. I had very few problems with 9.1 Beta 1 and am having tons of problems with 9.1 RC 1. In fact, sadly enough I've had to resort to booting into XP so that I can print and share internet connection with my LAN.
[Cooker] [Bug 3243] [kdebase] konqueror --profile webbrowsing points to file that doesnt exist
http://qa.mandrakesoft.com/show_bug.cgi?id=3243 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-03-14 07:03 --- bug fixed with a re-install of the indexhtml package. (installing the latest version) --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When you start konqueror from the KDE menu, the actual command that it executes is konqueror --profile webbrowsing Using the webbrowsing profile means that Konqueror opens and displays the webpage: View0_URL=file:/usr/share/doc/HTML/index.html when it starts up. The problem is that this file doesnt exist. The package indexhtml-9.1-7mdk provides the index.html file in a different path. The webbrowsing profile needs to be updated to reflect the path of the index.html file as provided by the indexhtml package. As of indexhtml-9.1-7mdk, the correct path to index.html is /usr/share/mdk/indexhtml/index.html
[Cooker] [Bug 3203] [indexhtml] Konqueror and Mozilla points to wrong index.html
http://qa.mandrakesoft.com/show_bug.cgi?id=3203 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-03-14 07:04 --- bug fixed with a re-install of the indexhtml package. (installing the latest version) --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Both Konqueror and Mozilla points to an invalid (probably previous) position where the index.htm is stored. Both browsers point to the location /usr/share/doc/HTML/index.html where no index.html is found instead of pointing to the correct location that is /usr/share/mdk/indexhtml/index.html
[Cooker] [Bug 2219] [kdebase] shred clears all icons
http://qa.mandrakesoft.com/show_bug.cgi?id=2219 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEW Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-03-14 07:38 --- I can confirm. Might be non-specific to mandrake though in which case a bug should be filed on kde bugzilla. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Added the shred icon to the toolbar to shred important banking documents. Selecting the file and then shred appears to shred the file selected correctly and then clears all the icons from the konqueror window until the window is closed and re-opened. 845G graphics with 64Mb shred ram on P4 2.53GHz 845G chipset. 256Mb ram 20Gb hard drive with 30Gb NT drive
[Cooker] [Bug 878] [Bugzilla] Voting on multiple bugs in one 'product' impossible
http://qa.mandrakesoft.com/show_bug.cgi?id=878 --- Additional Comments From [EMAIL PROTECTED] 2003-03-11 00:21 --- Obviously this is post 9.1 stuff: (just wanted to note it down now) I get the following error when voting for more than one bug in the same component: Software error: SELECT fieldid FROM fielddefs WHERE name = 'bug_status': Table 'fielddefs' was not locked with LOCK TABLES at globals.pl line 252. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Voting for multiple bugs (in this case two) that appear in the same 'product' (in this case drakconf) is not possible. Bugzilla gives the error message: ¨You may only use at most 1 votes for bugs in the drakconf product, but you are trying to use 2.¨ I´m trying to vote for both bug 770 805.
[Cooker] [Bug 2775] [kdebase] cannot navigate with file selector
http://qa.mandrakesoft.com/show_bug.cgi?id=2775 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 14:49 --- *** This bug has been marked as a duplicate of 2697 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Problem encountered with both RC1 and RC2 When I try to change the wallpaper, the file selector don't let me navigate through the tree, I mean whatever the directory clicked (/usr, /home etc...), nothing happens but if I type myself the location in the text bar (/home/download/wallpaper for example), the content is displayed Maybe related to Bug#: 2697 ?
[Cooker] [Bug 2697] [kdebase] Kwrite cannot navigate through directories
http://qa.mandrakesoft.com/show_bug.cgi?id=2697 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 14:49 --- *** Bug 2775 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: In Mandrake 9.1 RC-2, kwrite cannot navigate directories. It shows directory name as name-of-directory instead of name-of-directory.
[Cooker] [Bug 2697] [kdebase] Kwrite cannot navigate through directories
http://qa.mandrakesoft.com/show_bug.cgi?id=2697 --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 14:49 --- *** Bug 2795 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: In Mandrake 9.1 RC-2, kwrite cannot navigate directories. It shows directory name as name-of-directory instead of name-of-directory.
[Cooker] [Bug 2795] [kdebase] Not able to change directories...
http://qa.mandrakesoft.com/show_bug.cgi?id=2795 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 14:49 --- *** This bug has been marked as a duplicate of 2697 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: - If I try to set a new Wallpaper through KDE Control Center, I cannot change to a different directory than my Home Dir, I can use the Pulldown menu, but it´s not possible to click on a folder...it doesn´t open. - The same problem comes, when I try to make a shortcut for a program on my Desktop.. Sorry, for my bad english, I hope you understand what I mean.
[Cooker] [Bug 2802] [kdebase] KDE configuration module : unable to open a directory with the mouse
http://qa.mandrakesoft.com/show_bug.cgi?id=2802 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 14:49 --- *** This bug has been marked as a duplicate of 2697 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: KDE French What happens : I want to change the wallpaper : The button Parcourir open a new window to browse in the files. Everthing works except that it is not possible to open an existing directory with the mouse. It is necessary to write the name to open the directory.
[Cooker] [Bug 2697] [kdebase] Kwrite cannot navigate through directories
http://qa.mandrakesoft.com/show_bug.cgi?id=2697 --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 14:49 --- *** Bug 2802 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: In Mandrake 9.1 RC-2, kwrite cannot navigate directories. It shows directory name as name-of-directory instead of name-of-directory.
[Cooker] [Bug 2890] [drakxtools] mdk91.rc1 presario705EA after log out reboot does not work
http://qa.mandrakesoft.com/show_bug.cgi?id=2890 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 15:01 --- *** This bug has been marked as a duplicate of 2754 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: to reboot computer I need to go in text mode and make alt-ctrl-del
[Cooker] [Bug 2754] [drakxtools] mdk91.rc1 presario705EA after log out reboot does not work
http://qa.mandrakesoft.com/show_bug.cgi?id=2754 --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 15:01 --- *** Bug 2890 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: to reboot computer I need to go in text mode and make alt-ctrl-del
[Cooker] [Bug 2754] [drakxtools] mdk91.rc1 presario705EA after log out reboot does not work
http://qa.mandrakesoft.com/show_bug.cgi?id=2754 --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 15:01 --- *** Bug 2889 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: to reboot computer I need to go in text mode and make alt-ctrl-del
[Cooker] [Bug 2776] [drakxtools] mdk91.rc1 presario705EA after log out reboot does not work
http://qa.mandrakesoft.com/show_bug.cgi?id=2776 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-06 12:50 --- *** Bug 2779 has been marked as a duplicate of this bug. *** --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 15:01 --- *** This bug has been marked as a duplicate of 2754 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: to reboot computer I need to go in text mode and make alt-ctrl-del
[Cooker] [Bug 2754] [drakxtools] mdk91.rc1 presario705EA after log out reboot does not work
http://qa.mandrakesoft.com/show_bug.cgi?id=2754 --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 15:01 --- *** Bug 2891 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: to reboot computer I need to go in text mode and make alt-ctrl-del
[Cooker] [Bug 2754] [drakxtools] mdk91.rc1 presario705EA after log out reboot does not work
http://qa.mandrakesoft.com/show_bug.cgi?id=2754 --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 15:01 --- *** Bug 2776 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: to reboot computer I need to go in text mode and make alt-ctrl-del
[Cooker] [Bug 2889] [drakxtools] mdk91.rc1 presario705EA after log out reboot does not work
http://qa.mandrakesoft.com/show_bug.cgi?id=2889 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 15:01 --- *** This bug has been marked as a duplicate of 2754 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: to reboot computer I need to go in text mode and make alt-ctrl-del
[Cooker] [Bug 2891] [drakxtools] mdk91.rc1 presario705EA after log out reboot does not work
http://qa.mandrakesoft.com/show_bug.cgi?id=2891 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 15:01 --- *** This bug has been marked as a duplicate of 2754 *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: to reboot computer I need to go in text mode and make alt-ctrl-del
[Cooker] [Bug 878] [Bugzilla] Voting on multiple bugs in one 'product' impossible
http://qa.mandrakesoft.com/show_bug.cgi?id=878 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEW Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-01-22 15:11 --- Yes. This must be a default buzilla problem, I will have to check if the bugzilla CVS has some fixes, but this is not my priority right now. --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 18:01 --- confirmed by warly on cooker and in comment here --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Voting for multiple bugs (in this case two) that appear in the same 'product' (in this case drakconf) is not possible. Bugzilla gives the error message: ¨You may only use at most 1 votes for bugs in the drakconf product, but you are trying to use 2.¨ I´m trying to vote for both bug 770 805.
[Cooker] [Bug 156] [drakxtools] DrakClock cannot display 7:00h
http://qa.mandrakesoft.com/show_bug.cgi?id=156 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEW --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 03:56 --- this bug is still present, also confirmed by Daouda. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: First of all: sorry, but I didn't find an appropriate category or package for this bug (theres no DrakClock or Clock.pl in the package-list). Maybe a diverse-category would be useful for such things. When I click on Adjust DateTime in Gnome, DrakClock starts. DrakClock has a little bug: the hour-hand cannot display 7:00h and 19:00h, it stops at 6:00 (18:00) and does not move on until 8:00 (20:00)
[Cooker] [Bug 2574] [Hardware] mdk91.rc1(8.x too): presario 705EA do not reboot system
http://qa.mandrakesoft.com/show_bug.cgi?id=2574 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||INVALID --- Additional Comments From [EMAIL PROTECTED] 2003-03-01 21:53 --- This is a fault in the Presario bios implementation of ACPI (power control). In order to get a fully functioning system you need to rebuild the kernel and leave out APIC (not ACPI). For a detailed how-to see my website http://individual.utoronto.ca/noyes/projects/laptop/tuxtop.html Also please bug the Compaq people to release a new bios version. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: when reboot the system on the screen you see Compaq logo you see access to HD and nothing more Portable computer presario 705EA 1 GHz Athlon 256 MB RAM DVD/CD-RW rtl8139
[Cooker] [Bug 2437] [acpi] the system always says that the battery is not present
http://qa.mandrakesoft.com/show_bug.cgi?id=2437 --- Additional Comments From [EMAIL PROTECTED] 2003-02-27 16:10 --- -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Sascha's obligatory hint for Presario 700 users: Mandrake Linux can be made to run with ACPI on the Presario 700 series - however you need to recompile the kernel, and I haven't gotten suspend to work. See my how-to: http://individual.utoronto.ca/noyes/projects/laptop/tuxtop.html Sascha Noyes On Thursday 27 February 2003 01:35 am, mandrake wrote: -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.1 (GNU/Linux) iD4DBQE+XidAgzJdfX+cTW8RAuV+AJsFVDYPBoVUOJj+zNd4eLFDttB+TwCVE5Ev qxKRFKFp3103hDkin/nWxQ== =gj8/ -END PGP SIGNATURE- --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: hum, all is said in the summary. (Mandrake 9.1rc1)
[Cooker] [Bug 2300] [Bugzilla] White buttons with konqueror (9.1 rc1)
http://qa.mandrakesoft.com/show_bug.cgi?id=2300 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-27 01:17 --- fixed with latest galaxy update --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: The buttons of this form https://qa.mandrakesoft.com/enter_bug.cgi are white with konqueror (Mdk 9.1 rc1) For example : Commit This is not true with konqueror (Mdk 9.0) or Mozilla. Is this a problem for bugzilla or konqueror ?
[Cooker] [Bug 2343] [kdebase] konqueror form button display problems
http://qa.mandrakesoft.com/show_bug.cgi?id=2343 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-27 01:17 --- fixed with latest galaxy update --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I just did a fresh install of Mandrake 9.1RC1. (note this is not available for reporting in mandrakeexpert.com so I am reporting it here). currently installed: kdebase-3.1-35mdk (9.1 rc1) I am running in 24bit x-windows 1600-1200 under KDE desktop Any pages with forms, the buttons are not readable, just grey blobs. Note that I had just wiped 9.1 beta3 from the exact same machine and had no problems there. - Ken Bauer
[Cooker] [Bug 1813] [galaxy-kde] pb in konqueror
http://qa.mandrakesoft.com/show_bug.cgi?id=1813 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-02-27 01:17 --- fixed with latest galaxy update --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Language French Under KDE konqueror has problems with buttons : for instance, go to bugzilla, you will see that it lacks buttons. It's not a bugzilla pb because i checked that with mozilla, every buttons are there. The scrollbar, in konqueror , doesn't visible clearly.
[Cooker] [Bug 2300] [Bugzilla] White buttons with konqueror (9.1 rc1)
http://qa.mandrakesoft.com/show_bug.cgi?id=2300 [EMAIL PROTECTED] changed: What|Removed |Added Status|RESOLVED|UNCONFIRMED Resolution|FIXED | --- Additional Comments From [EMAIL PROTECTED] 2003-02-27 02:13 --- Paul: either -8mdk or -9mdk fixed it. Its back again with galaxy-0.1-10mdk (damn now I have to do this all over again) --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: The buttons of this form https://qa.mandrakesoft.com/enter_bug.cgi are white with konqueror (Mdk 9.1 rc1) For example : Commit This is not true with konqueror (Mdk 9.0) or Mozilla. Is this a problem for bugzilla or konqueror ?
[Cooker] [Bug 2343] [kdebase] konqueror form button display problems
http://qa.mandrakesoft.com/show_bug.cgi?id=2343 [EMAIL PROTECTED] changed: What|Removed |Added Status|RESOLVED|UNCONFIRMED Resolution|FIXED | --- Additional Comments From [EMAIL PROTECTED] 2003-02-27 02:14 --- back again in galaxy-0.1-10mdk --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I just did a fresh install of Mandrake 9.1RC1. (note this is not available for reporting in mandrakeexpert.com so I am reporting it here). currently installed: kdebase-3.1-35mdk (9.1 rc1) I am running in 24bit x-windows 1600-1200 under KDE desktop Any pages with forms, the buttons are not readable, just grey blobs. Note that I had just wiped 9.1 beta3 from the exact same machine and had no problems there. - Ken Bauer
