Re: [Cooker] Urpmi bad signature solution
Below procedure works for the most packages, but there are still a lot rpm's with key ID 604aa4e4 wich can't be exported: # rpm -Fvh *rpm warning: apache2-2.0.45-5mdk.i586.rpm: V3 DSA signature: NOKEY, key ID 604aa4e4 This grows up when I query through all rpm's. Is there any way to fix this also or do we have to wait for new correct rpm's ? Regards Udo Am Dienstag, 27. Mai 2003 23:58 schrieb MEISCH,CORY (HP-Vancouver,ex1): Perfect! Thank you. -Original Message- From: Adam Williamson [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 27, 2003 2:45 PM To: [EMAIL PROTECTED] Subject: Re: [Cooker] Urpmi bad signature solution On Tue, 2003-05-27 at 22:36, MEISCH,CORY (HP-Vancouver,ex1) wrote: Did we ever determine what is the correct procedure for fixing the 'bad signature' error messages for 1/2 the packages that get installed? # gpg --export -a 22458A98 22458A98.asc # gpg --export -a 70771ff3 70771ff3.asc # gpg --export -a 9B4A4024 9B4A4024.asc # rpm --import *.asc
Re: [Cooker] wish list for 9.2
A bugfree released MDK 9.2 - with all bugs resolved known from cooker and bugzilla
Re: [Cooker] OT - Anyone building/testing the 2.5 kernel?
i god the same problem in the past, reason was when I made make menuconfig the script was looking for /boot/config which points for normal MDK to config-2.4.21-0.13mdk and if this exists it takes the settings from there which results is some incorrect settings at the end of make menuconfig (e.g. for console). You have to remove this link for the time you config the new kernel and you should get some better results. Udo Am Sonntag, 23. März 2003 06:28 schrieb Paul Misner: I'm interested in looking at the 2.5 kernel, but I'm not an experienced kernel hacker, and I'm having a hard time getting everything set up properly. I understand from an article in the Linux Journal http://www.linuxjournal.com/article.php?sid=6740 that things may be stable enough for some testing by someone like those of us who do cooker testing. The problem is getting everything set up and working. I hear we already have the proper module init tools if we urpmi module-init-tools from a posting after the Linux Journal article by Chmouel. I can get past the initial message when the 2.5.65 kernel boots, then my drive light blinks for some time, but nothing else ever comes up on the console. Like I said, off topic for the cooker list, and probably showing my lack of knowledge. It may be something someone here can help with though, either from the Mandrake crew (when might the 2.5 series appear in the cooker?), or from someone else. I just figured that now (cooker frozen for 9.1, 9.2 about to start) would be a good time to ask. Paul Misner
[Cooker] where can I read something about zeroconf ?
zeroconf is a new feature anounced for MDK 9.1 but where can I find some infos about this ? Regards Udo
[Cooker] [Bug 3215] [drakxtools] adsl-connection will not propper config because syntax-errors
http://qa.mandrakesoft.com/show_bug.cgi?id=3215
--- Additional Comments From [EMAIL PROTECTED] 2003-03-14 11:12 ---
The described bug is still in version 9.1.22.
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--- Reminder: ---
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
Always on each attempt to configure the adsl-connection when trying to connect,
following
errors are displayed and no connection are established (this happens during initial
config
during install and also when I try later to config the adsl):
GLib-CRITICAL **: file gmain.c: line 500 (g_source_remove): assertion `tag 0'
failed.
SIOCDELRT: No such process
/etc/sysconfig/network-scripts/net_cnx_up: line 3: syntax error near unexpected
token `('
/etc/sysconfig/network-scripts/net_cnx_up: line 3: `LC_ALL=C LANG=C LANGUAGE=C L
C_MESSAGES=C /usr/sbin/adsl-start eth1 (using module 8139too) 000123456789
[EMAIL PROTECTED]'
GLib-CRITICAL **: file gmain.c: line 500 (g_source_remove): assertion `tag 0'
failed.
SIOCDELRT: No such process
/usr/sbin/adsl-start: /etc/ppp/pppoe.conf: line 24: syntax error near unexpected
token `('
/usr/sbin/adsl-start: /etc/ppp/pppoe.conf: line 24: `ETH=eth1 (using module 8139
too)'
I always have manually to remove (using module 8139too) from both config-files.
[Cooker] [Bug 3215] [drakxtools-newt] adsl-connection will not propper config because syntax-errors
http://qa.mandrakesoft.com/show_bug.cgi?id=3215
--- Additional Comments From [EMAIL PROTECTED] 2003-03-14 18:29 ---
mm.
I did a new installation today 5pm with a most current cooker-snapshot (today
4pm)
After the new installation:
ls /etc/sysconfig/network-scripts/ifcfg-*
ifcfg-eth0 ifcfg-eth1* ifcfg-eth1 (using module 8139too)* ifcfg-lo@
is this garbage ?
more ifcfg-eth1
first line: DEVICE=eth1 - looks good to me
more ifcfg-eth1 (using module 8139too)
first line: DEVICE=eth1 (using module 8139too) - probable garbage (and mayb
the reason)
This is also the status when I call again drakconnect after the new
installation.
So the bug is still there and prevent a proper adsl-config !
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--- Reminder: ---
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
Always on each attempt to configure the adsl-connection when trying to connect,
following
errors are displayed and no connection are established (this happens during initial
config
during install and also when I try later to config the adsl):
GLib-CRITICAL **: file gmain.c: line 500 (g_source_remove): assertion `tag 0'
failed.
SIOCDELRT: No such process
/etc/sysconfig/network-scripts/net_cnx_up: line 3: syntax error near unexpected
token `('
/etc/sysconfig/network-scripts/net_cnx_up: line 3: `LC_ALL=C LANG=C LANGUAGE=C L
C_MESSAGES=C /usr/sbin/adsl-start eth1 (using module 8139too) 000123456789
[EMAIL PROTECTED]'
GLib-CRITICAL **: file gmain.c: line 500 (g_source_remove): assertion `tag 0'
failed.
SIOCDELRT: No such process
/usr/sbin/adsl-start: /etc/ppp/pppoe.conf: line 24: syntax error near unexpected
token `('
/usr/sbin/adsl-start: /etc/ppp/pppoe.conf: line 24: `ETH=eth1 (using module 8139
too)'
I always have manually to remove (using module 8139too) from both config-files.
[Cooker] [Bug 3215] [drakxtools] adsl-connection will not propper config because syntax-errors
http://qa.mandrakesoft.com/show_bug.cgi?id=3215
--- Additional Comments From [EMAIL PROTECTED] 2003-03-13 20:58 ---
version 9.1-21mdk still has above described bug, I have verified this by calling
drakconnect
and tryed to run the wizard for configure the adsl-connection
Regards Udo
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--- Reminder: ---
assigned_to: [EMAIL PROTECTED]
status: UNCONFIRMED
creation_date:
description:
Always on each attempt to configure the adsl-connection when trying to connect,
following
errors are displayed and no connection are established (this happens during initial
config
during install and also when I try later to config the adsl):
GLib-CRITICAL **: file gmain.c: line 500 (g_source_remove): assertion `tag 0'
failed.
SIOCDELRT: No such process
/etc/sysconfig/network-scripts/net_cnx_up: line 3: syntax error near unexpected
token `('
/etc/sysconfig/network-scripts/net_cnx_up: line 3: `LC_ALL=C LANG=C LANGUAGE=C L
C_MESSAGES=C /usr/sbin/adsl-start eth1 (using module 8139too) 000123456789
[EMAIL PROTECTED]'
GLib-CRITICAL **: file gmain.c: line 500 (g_source_remove): assertion `tag 0'
failed.
SIOCDELRT: No such process
/usr/sbin/adsl-start: /etc/ppp/pppoe.conf: line 24: syntax error near unexpected
token `('
/usr/sbin/adsl-start: /etc/ppp/pppoe.conf: line 24: `ETH=eth1 (using module 8139
too)'
I always have manually to remove (using module 8139too) from both config-files.
[Cooker] [Bug 3215] [drakxtools] New: adsl-connection will not propper config because syntax-errors
http://qa.mandrakesoft.com/show_bug.cgi?id=3215
Product: drakxtools
Component: DrakConnect
Summary: adsl-connection will not propper config because syntax-
errors
Version: 9.1-19mdk
Platform: Other
OS/Version: All
Status: UNCONFIRMED
Severity: major
Priority: P2
AssignedTo: [EMAIL PROTECTED]
ReportedBy: [EMAIL PROTECTED]
Always on each attempt to configure the adsl-connection when trying to connect,
following
errors are displayed and no connection are established (this happens during initial
config
during install and also when I try later to config the adsl):
GLib-CRITICAL **: file gmain.c: line 500 (g_source_remove): assertion `tag 0'
failed.
SIOCDELRT: No such process
/etc/sysconfig/network-scripts/net_cnx_up: line 3: syntax error near unexpected
token `('
/etc/sysconfig/network-scripts/net_cnx_up: line 3: `LC_ALL=C LANG=C LANGUAGE=C L
C_MESSAGES=C /usr/sbin/adsl-start eth1 (using module 8139too) 000123456789
[EMAIL PROTECTED]'
GLib-CRITICAL **: file gmain.c: line 500 (g_source_remove): assertion `tag 0'
failed.
SIOCDELRT: No such process
/usr/sbin/adsl-start: /etc/ppp/pppoe.conf: line 24: syntax error near unexpected
token `('
/usr/sbin/adsl-start: /etc/ppp/pppoe.conf: line 24: `ETH=eth1 (using module 8139
too)'
I always have manually to remove (using module 8139too) from both config-files.
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 3059] [SysVinit] Shutdown ends with some sort of UTF8 error.
http://qa.mandrakesoft.com/show_bug.cgi?id=3059 --- Additional Comments From [EMAIL PROTECTED] 2003-03-10 13:55 --- same for my installation from the current cooker-install tree, additional I believe mc running in the console and harddrake-selection during startup are also broken --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Configuration: - AMD Duron 1.2, 512Mb, Shuttle XPC SN41G2 Nforce2, Maxtor 120Gb - Fresh MDK 9.1 RC2 installation, no NVIDIA drivers installed Problem 1: SysVinit % shutdown -r now ;2R - bash: syntax error near unexpected token ';' % shutdown -r now is_in_UTF8_mode: Input/Output error - in installation I checked Force UTF8 mode or what was it...
