http://qa.mandrakesoft.com/show_bug.cgi?id=2525
Product: kernel Component: kernel Summary: eth0 interface does not connect with sis900 Version: 2.4.21-0.pre4.6mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: critical Priority: P2 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I installed mandrake 9.1-rc1 on a pentium4 with sis55xx chipset motherboard from Asus, and a sis900 ethernet card included in the motherboard. This machine is connetted to another PC through an ethernet cable, to make a home local network. Both Pcs have local assigned IP addresses 192.168.1.1(-> the "server") and 192.168.1.2(->the P4 with Mandrake). Apparently all devices are correctly configured and the the eth0 interface is up, as the "ifconfig" command shows. But a "ping" command on the other PC (192.168.1.1) does not give any result, it does not see the other PC. Moreover, error messages of the form "Watchdog: Network..timed out" continue to accumulate at the bottom of the "dmesg" output. At first I wondered if it was a problem of network configuration, but it is not. I tried to install and compile the official 2.4.20 kernel from the linux sources, reinstalled LILO with this kernel and rebooted and everything worked fine, I was also able to go to the internet through the other PC internet connection. Then I installed the 2.4.21pre4-6mdk sources and compiled them with the same configuration I used for 2.4.20 and again the network refused to work. So the network did not work with the "custom" 2.4.21pre4-6mdk kernel I built, neither with the precompiled 2.4.21pre4-6mdk kernel present in the distribution. Thanks for any possible solution (for now I am using the 2.4.20 kernel) Vincenzo ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.