RE: [Cooker] Disk Drake beta-2 ISO install
:Have you used "Use hard drive optimisations (may cause data :corruption)" :at Install time? the only option I selected was clean \tmp at boot as i wsan't sure how much of a may there was in may cause data corruption Oliver Stieber <[EMAIL PROTECTED]> writes: > Diskdrake 7.2 (not 7.1 /7.0 they work fine) appears to have a problem > detecting partitions when my dvd drive is pluged in. > > eg > > hda = 20gb ibm > hdb = dvd drive > hdc = 20gb ibm > hdd = ide cd-rw > > hda will fail to detect (bad magic number in partition table) > > when i do > > hda = 20gb ibm > hdb = ide cd-rw > hdc = 20gb ibm > hdd = dvd drive > > hdc fails to detect correctly > > when i do > > hda = 20gb ibm > hdb = ide cd-rw > hdc = 20gb ibm > > all is ok... > > all drives are on udma66 leads, > i also have a hpt470 (aka hpt466) with nothing pluged in as ide2/3 > > (this pc dosn't have 2 extended partition tables like my other one ;-)
Re: [Cooker] Disk Drake beta-2 ISO install
Oliver Stieber <[EMAIL PROTECTED]> writes: > Diskdrake 7.2 (not 7.1 /7.0 they work fine) appears to have a problem > detecting partitions when my dvd drive is pluged in. > > eg > > hda = 20gb ibm > hdb = dvd drive > hdc = 20gb ibm > hdd = ide cd-rw > > hda will fail to detect (bad magic number in partition table) > > when i do > > hda = 20gb ibm > hdb = ide cd-rw > hdc = 20gb ibm > hdd = dvd drive > > hdc fails to detect correctly > > when i do > > hda = 20gb ibm > hdb = ide cd-rw > hdc = 20gb ibm > > all is ok... > > all drives are on udma66 leads, > i also have a hpt470 (aka hpt466) with nothing pluged in as ide2/3 > > (this pc dosn't have 2 extended partition tables like my other one ;-) Have you used "Use hard drive optimisations (may cause data corruption)" at Install time? If so, try to remove the "autotune" parameter from your boot parameters. -- Guillaume Cottenceau -- Distribution Developer for MandrakeSoft http://www.mandrakesoft.com/~gc/
[Cooker] Disk Drake beta-2 ISO install
Diskdrake 7.2 (not 7.1 /7.0 they work fine) appears to have a problem detecting partitions when my dvd drive is pluged in. eg hda = 20gb ibm hdb = dvd drive hdc = 20gb ibm hdd = ide cd-rw hda will fail to detect (bad magic number in partition table) when i do hda = 20gb ibm hdb = ide cd-rw hdc = 20gb ibm hdd = dvd drive hdc fails to detect correctly when i do hda = 20gb ibm hdb = ide cd-rw hdc = 20gb ibm all is ok... all drives are on udma66 leads, i also have a hpt470 (aka hpt466) with nothing pluged in as ide2/3 (this pc dosn't have 2 extended partition tables like my other one ;-)