Re: [Cooker] PCMCIA card (un)plugging hangs 8.2rc1
mikko == Mikko Huhtala [EMAIL PROTECTED] writes: mikko Installed 8.2rc1 on an old Toshiba Tecra 750CDT laptop (5 years or so, mikko Pentium 233 MMX). The machine has 2 PC Card slots, whose controller, mikko Toshiba ToPIC97, is dectected correctly during install. When the mikko machine is booted after install, cardmgr comes up and seems to be mikko running, but no cards are detected. I have a network card in one slot mikko and a modem in the other. If I eject one or the other card, the system mikko hangs immediately. mikko I have been happily using a kernel and a pcmcia-cs package mikko (distributed separately, not the in-kernel thing) compiled from source mikko since 8.0 installation hanged on PCMCIA detection (I installed with mikko 'nopcmcia' passed to kernel). Seems like the pcmcia support must be mikko recompiled for 8.2 as well. Should be fixed in 2.4.18-6mdk kernel. Later, Juan. -- In theory, practice and theory are the same, but in practice they are different -- Larry McVoy
[Cooker] PCMCIA card (un)plugging hangs 8.2rc1
Installed 8.2rc1 on an old Toshiba Tecra 750CDT laptop (5 years or so, Pentium 233 MMX). The machine has 2 PC Card slots, whose controller, Toshiba ToPIC97, is dectected correctly during install. When the machine is booted after install, cardmgr comes up and seems to be running, but no cards are detected. I have a network card in one slot and a modem in the other. If I eject one or the other card, the system hangs immediately. I have been happily using a kernel and a pcmcia-cs package (distributed separately, not the in-kernel thing) compiled from source since 8.0 installation hanged on PCMCIA detection (I installed with 'nopcmcia' passed to kernel). Seems like the pcmcia support must be recompiled for 8.2 as well. Mikko Huhtala
Re: [Cooker] PCMCIA card (un)plugging hangs 8.2rc1
Mikko Huhtala [EMAIL PROTECTED] writes: Installed 8.2rc1 on an old Toshiba Tecra 750CDT laptop (5 years or so, Pentium 233 MMX). The machine has 2 PC Card slots, whose controller, Toshiba ToPIC97, is dectected correctly during install. When the machine is booted after install, cardmgr comes up and seems to be running, but no cards are detected. I have a network card in one slot and a modem in the other. If I eject one or the other card, the system hangs immediately. I have been happily using a kernel and a pcmcia-cs package (distributed separately, not the in-kernel thing) compiled from source since 8.0 installation hanged on PCMCIA detection (I installed with 'nopcmcia' passed to kernel). Seems like the pcmcia support must be recompiled for 8.2 as well. try to boot with devfs=nomount and test if that works -- Warly
Re: [Cooker] PCMCIA card (un)plugging hangs 8.2rc1
I can confirm this on a Gateway Solo 9100 with a Zoom Telephonics pcmcia modem card. Also, trying to use this modem if plugged in at boot time will almost always come up with modem busy with kppp. Ejecting the card will crash the kernel, it starts displaying numbers on the console terminal. Unfortunately, they go by much too fast to catch the message before them. Starting the machine WITHOUT the cards in, and inserting them after the machine is fully up seems to work OK V. On Wednesday 13 March 2002 07:23 am, you wrote: Installed 8.2rc1 on an old Toshiba Tecra 750CDT laptop (5 years or so, Pentium 233 MMX). The machine has 2 PC Card slots, whose controller, Toshiba ToPIC97, is dectected correctly during install. When the machine is booted after install, cardmgr comes up and seems to be running, but no cards are detected. I have a network card in one slot and a modem in the other. If I eject one or the other card, the system hangs immediately. I have been happily using a kernel and a pcmcia-cs package (distributed separately, not the in-kernel thing) compiled from source since 8.0 installation hanged on PCMCIA detection (I installed with 'nopcmcia' passed to kernel). Seems like the pcmcia support must be recompiled for 8.2 as well. Mikko Huhtala
Re: [Cooker] PCMCIA card (un)plugging hangs 8.2rc1
Warly writes: Mikko Huhtala [EMAIL PROTECTED] writes: machine is booted after install, cardmgr comes up and seems to be running, but no cards are detected. I have a network card in one slot and a modem in the other. If I eject one or the other card, the system hangs immediately. try to boot with devfs=nomount and test if that works -- Warly In dmesg kernel card services say PCI: No IRQ known for interrupt pin A of device 00:02.0. PCI: No IRQ known for interrupt pin B of device 00:02.1. Yenta IRQ list 06b8, PCI irq0 Socket status: 3011 Yenta IRQ list 06b8, PCI irq0 Socket status: 3011 So it seems that IRQs do not get assigned correctly, but I suspect this is only a symptom of actual problem. I tried with 'devfs=nomount' as well as 'pci=biosirq' (recommended by cardmgr) both separately and together. The problem presists. My case seems to be a bit different from the one reported elsewhere in this thread in that if I boot without the cards and then plug one (does not matter which one) in when the system is up and cardmgr is running, the system does hang. Mikko