Re: [Cooker] pcmcia.img doesn't boot
Mark Draheim <[EMAIL PROTECTED]> writes: > it won't even show the first boot screen. I tried several floppies and > even burnt the image to CD to make sure that my floppy drive isn't > faulty. I downloaded the img again just in case the file was corrupted > at download. [EMAIL PROTECTED] /tmp] md5sum /c/cooker/images/pcmcia.img 6f0dcf4e4bc72d347a05fee4e9471a6a /c/cooker/images/pcmcia.img [EMAIL PROTECTED] /tmp] md5sum /dev/fd0 6f0dcf4e4bc72d347a05fee4e9471a6a /dev/fd0 On my test machine, shows the splash screen, white progressbar progresses, kernel boot (2.4.22-10mdkBOOT), stage1 starts. -- Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
[Cooker] pcmcia.img doesn't boot
it won't even show the first boot screen. I tried several floppies and even burnt the image to CD to make sure that my floppy drive isn't faulty. I downloaded the img again just in case the file was corrupted at download. This is on an old Pentium 233 laptop. The network.img boots just fine but it doesn't have the module for my pcmcia ethernet card. Mark
[Cooker] pcmcia.img
In the install method when I choose ADSL load every modules needed but I have the following error *cannot open pppd - /sbin/pppd doesn't exist
no kernel configured at install (was Re: [Cooker] pcmcia.img - more problems)
[EMAIL PROTECTED] (Robert Fox) writes: > But now, I get a bootloader install failure: > > fatal: No images have been defined or default image doesn't exist hopefully fixed in DrakX #1.607
RE: [Cooker] pcmcia.img - more problems
Sorry - forgot the attachment . . .. There is a problem because it constantly is trying the media (especially when I start a KDE session!) - Which majorly slows things down. There seems to be a long timeout period before it gives up trying to access the drive, and the KDE session is horribly slow. Can this have something to do with supermount? Is there a change in fstab which I can make to correct this? This problem wasn't there until recently (newer kernels) Even with media in the drive (standard floppy) and is mounted, these errors still occur. The media is readable. Attached is the full syslog.txt to see how many errors there are! Thx, R.Fox On Wed, 2001-12-05 at 16:59, Borsenkow Andrej wrote: > > > > I got other problems now - most seriously, there appears to be a > problem > > with the LS120 floppy on the notebook under the latest Cooker (drive > is > > fine) > > > > So far there is no problems - on boot it tries to get partition table > off your LS120 and fails because there is no media in drive. > > What happens when you insert media and try to access it? > > > -andrej > Dec 4 15:41:20 localhost syslogd 1.4.1: restart. Dec 4 15:41:20 localhost kernel: klogd 1.4.1, log source = /proc/kmsg started. Dec 4 15:41:20 localhost kernel: Inspecting /boot/System.map-2.4.16.3mdk-1-1mdksmp Dec 4 15:41:20 localhost random: Initializing random number generator: succeeded Dec 4 15:41:21 localhost netfs: Mounting other filesystems: succeeded Dec 4 15:41:21 localhost kernel: Loaded 16096 symbols from /boot/System.map-2.4.16.3mdk-1-1mdksmp. Dec 4 15:41:21 localhost kernel: Symbols match kernel version 2.4.16. Dec 4 15:41:21 localhost kernel: Loaded 378 symbols from 21 modules. Dec 4 15:41:21 localhost kernel: Linux version 2.4.16.3mdk-1-1mdksmp ([EMAIL PROTECTED]) (gcc version 2.96 2731 (Mandrake Linux 8.2 2.96-0.68mdk)) #1 SMP Tue Dec 4 20:33:28 CET 2001 Dec 4 15:41:21 localhost kernel: BIOS-provided physical RAM map: Dec 4 15:41:21 localhost kernel: BIOS-e820: - 0009f800 (usable) Dec 4 15:41:21 localhost kernel: BIOS-e820: 0009f800 - 000a (reserved) Dec 4 15:41:21 localhost kernel: BIOS-e820: 000f1218 - 0010 (reserved) Dec 4 15:41:21 localhost kernel: BIOS-e820: 0010 - 13ffbc00 (usable) Dec 4 15:41:21 localhost kernel: BIOS-e820: 13ffbc00 - 13fffc00 (ACPI data) Dec 4 15:41:21 localhost kernel: BIOS-e820: 13fffc00 - 1400 (ACPI NVS) Dec 4 15:41:21 localhost kernel: BIOS-e820: 1218 - 0001 (reserved) Dec 4 15:41:21 localhost kernel: hm, page 1000 reserved twice. Dec 4 15:41:21 localhost kernel: On node 0 totalpages: 81915 Dec 4 15:41:21 localhost kernel: zone(0): 4096 pages. Dec 4 15:41:21 localhost kernel: zone(1): 77819 pages. Dec 4 15:41:21 localhost kernel: zone(2): 0 pages. Dec 4 15:41:21 localhost kernel: Local APIC disabled by BIOS -- reenabling. Dec 4 15:41:21 localhost kernel: Could not enable APIC! Dec 4 15:41:21 localhost kernel: Kernel command line: BOOT_IMAGE=linux ro root=306 Dec 4 15:41:21 localhost kernel: Initializing CPU#0 Dec 4 15:41:21 localhost kernel: Detected 400.012 MHz processor. Dec 4 15:41:21 localhost kernel: Console: colour dummy device 80x25 Dec 4 15:41:21 localhost kernel: Calibrating delay loop... 797.90 BogoMIPS Dec 4 15:41:21 localhost kernel: Memory: 319648k/327660k available (1200k kernel code, 7624k reserved, 445k data, 264k init, 0k highmem) Dec 4 15:41:21 localhost kernel: Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Dec 4 15:41:21 localhost kernel: Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Dec 4 15:41:21 localhost kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Dec 4 15:41:21 localhost kernel: Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Dec 4 15:41:21 localhost kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Dec 4 15:41:21 localhost kernel: CPU: Before vendor init, caps: 0183f9ff , vendor = 0 Dec 4 15:41:21 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K Dec 4 15:41:21 localhost kernel: CPU: L2 cache: 256K Dec 4 15:41:21 localhost kernel: Intel machine check architecture supported. Dec 4 15:41:21 localhost kernel: Intel machine check reporting enabled on CPU#0. Dec 4 15:41:21 localhost kernel: CPU: After vendor init, caps: 0183f9ff Dec 4 15:41:21 localhost kernel: CPU: After generic, caps: 0183f9ff Dec 4 15:41:21 localhost kernel: CPU: Common caps: 0183f9ff Dec 4 15:41:21 localhost kernel: Enabling fast FPU save and restore... done. Dec 4 15:41:21 localhost kernel: Checking 'hlt' instruction... OK. Dec 4 15:41:21 localhost kernel: POSIX conformance testing by UNIFIX Dec 4 15:41:21 localhost kernel: mtrr: v1.40 (200
RE: [Cooker] pcmcia.img - more problems
There is a problem because it constantly is trying the media (especially when I start a KDE session!) - Which majorly slows things down. There seems to be a long timeout period before it gives up trying to access the drive, and the KDE session is horribly slow. Can this have something to do with supermount? Is there a change in fstab which I can make to correct this? This problem wasn't there until recently (newer kernels) Even with media in the drive (standard floppy) and is mounted, these errors still occur. The media is readable. Attached is the full syslog.txt to see how many errors there are! Thx, R.Fox On Wed, 2001-12-05 at 16:59, Borsenkow Andrej wrote: > > > > I got other problems now - most seriously, there appears to be a > problem > > with the LS120 floppy on the notebook under the latest Cooker (drive > is > > fine) > > > > So far there is no problems - on boot it tries to get partition table > off your LS120 and fails because there is no media in drive. > > What happens when you insert media and try to access it? > > > -andrej >
RE: [Cooker] pcmcia.img - more problems
> > I got other problems now - most seriously, there appears to be a problem > with the LS120 floppy on the notebook under the latest Cooker (drive is > fine) > So far there is no problems - on boot it tries to get partition table off your LS120 and fails because there is no media in drive. What happens when you insert media and try to access it? -andrej
Re: [Cooker] pcmcia.img - more problems
On 5 Dec 2001, Robert Fox wrote: > But now, I get a bootloader install failure: > > fatal: No images have been defined or default image doesn't exist I get the same, using network.img. Regards, Mattias
Re: [Cooker] pcmcia.img - more problems
I got other problems now - most seriously, there appears to be a problem with the LS120 floppy on the notebook under the latest Cooker (drive is fine) Attached are the dmesg, syslog and messages text. As for the Lilo problem, I went under advanced and added a manual entry for the 2.4.16 kernel and it worked under the install. Cheers, R.Fox On Wed, 2001-12-05 at 15:41, Guillaume Cottenceau wrote: > [EMAIL PROTECTED] (Robert Fox) writes: > > > Using the latest again (05.12.01) > > > > It still doesn't sutomaticall select the xircom_cb module, I have to > > select it manually - and the network config works fine now . . . > > > > But now, I get a bootloader install failure: > > > > fatal: No images have been defined or default image doesn't exist > > > > kernel log states: > > > > * Installing boot loader > > * running: lilo 2> /tmp/.error with root /mnt > > * warning: lilo failed > > * warning: lilo failed > > * warning: already displayed at > > /usr/bin/perl_install/install_steps_interactive.pm line 1155 > > Can you check the /mnt/tmp/.error or try to run lilo by hand to see what's > going on? > > > -- > Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/ > Dec 4 16:26:44 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0 Dec 4 16:26:44 localhost kernel: FAT: unable to read boot sector Dec 4 16:26:44 localhost kernel: FAT: freeing iocharset=iso8859-1 Dec 4 16:26:57 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0 Dec 4 16:27:22 localhost last message repeated 2 times Dec 4 16:27:22 localhost kernel: MSDOS FS: IO charset iso8859-1 Dec 4 16:27:22 localhost kernel: MSDOS FS: Using codepage 850 Dec 4 16:27:35 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0 Dec 4 16:27:35 localhost kernel: FAT: unable to read boot sector Dec 4 16:27:35 localhost kernel: FAT: freeing iocharset=iso8859-1 Dec 4 16:27:09 localhost login[1821]: FAILED LOGIN 1 FROM (null) FOR su, Authentication failure Dec 4 16:27:09 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0 Dec 4 16:27:12 localhost login(pam_unix)[1821]: session opened for user root by LOGIN(uid=0) Dec 4 16:27:12 localhost -- root[1821]: ROOT LOGIN ON tty1 Dec 4 16:27:22 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0 Dec 4 16:27:22 localhost kernel: MSDOS FS: IO charset iso8859-1 Dec 4 16:27:22 localhost kernel: MSDOS FS: Using codepage 850 Dec 4 16:27:35 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0 Dec 4 16:27:35 localhost kernel: FAT: unable to read boot sector Dec 4 16:27:35 localhost kernel: FAT: freeing iocharset=iso8859-1 Linux version 2.4.16.3mdk-1-1mdksmp ([EMAIL PROTECTED]) (gcc version 2.96 2731 (Mandrake Linux 8.2 2.96-0.68mdk)) #1 SMP Tue Dec 4 20:33:28 CET 2001 BIOS-provided physical RAM map: BIOS-e820: - 0009f800 (usable) BIOS-e820: 0009f800 - 000a (reserved) BIOS-e820: 000f1218 - 0010 (reserved) BIOS-e820: 0010 - 13ffbc00 (usable) BIOS-e820: 13ffbc00 - 13fffc00 (ACPI data) BIOS-e820: 13fffc00 - 1400 (ACPI NVS) BIOS-e820: 1218 - 0001 (reserved) hm, page 1000 reserved twice. On node 0 totalpages: 81915 zone(0): 4096 pages. zone(1): 77819 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Kernel command line: BOOT_IMAGE=linux ro root=306 Initializing CPU#0 Detected 400.012 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 797.90 BogoMIPS Memory: 319648k/327660k available (1200k kernel code, 7624k reserved, 445k data, 264k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0183f9ff , vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff CPU: After generic, caps: 0183f9ff CPU: Common caps: 0183f9ff Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0183f9ff , vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff CPU: After generic, caps: 0183f9ff CPU:
Re: [Cooker] pcmcia.img - more problems
[EMAIL PROTECTED] (Robert Fox) writes: > Using the latest again (05.12.01) > > It still doesn't sutomaticall select the xircom_cb module, I have to > select it manually - and the network config works fine now . . . > > But now, I get a bootloader install failure: > > fatal: No images have been defined or default image doesn't exist > > kernel log states: > > * Installing boot loader > * running: lilo 2> /tmp/.error with root /mnt > * warning: lilo failed > * warning: lilo failed > * warning: already displayed at > /usr/bin/perl_install/install_steps_interactive.pm line 1155 Can you check the /mnt/tmp/.error or try to run lilo by hand to see what's going on? -- Guillaume Cottenceau - http://people.mandrakesoft.com/~gc/
[Cooker] pcmcia.img - more problems
Using the latest again (05.12.01) It still doesn't sutomaticall select the xircom_cb module, I have to select it manually - and the network config works fine now . . . But now, I get a bootloader install failure: fatal: No images have been defined or default image doesn't exist kernel log states: * Installing boot loader * running: lilo 2> /tmp/.error with root /mnt * warning: lilo failed * warning: lilo failed * warning: already displayed at /usr/bin/perl_install/install_steps_interactive.pm line 1155 Cheers, R.Fox
[Cooker] pcmcia.img 20000915 23.39 double entry xinetd in configure services....modprobe 3c589_cs don't work because...
Synched on sunsite.uio.no 04:30 CEST /etc/modules is now empty /etc/modules.conf has no more alias eth0 (time ago was alias eth0 usb-uhci !?) than : traceroute: can't find any network interfaces (during installer I said done when asked me if I want change network configuration, because for ftp install I gave correct IPs...) modprobe 3c589_cs (there is in /lib/modules/2.2.17-5mdk/pcmcia) not work How I can configure network card ??? If I look in /var/log/messages I see : ./network: ./network.opts: No such file or directory Verified in /etc/pcmcia launching ./network check eth0 Noted also big changes in /etc/pcmcia/network. if I `touch /etc/pcmcia/network.opts` retrying check it respond : ./network: /etc/pcmcia/wireless: No such file or directory if I `touch /etc/pcmcia/wireless` and reboot : NETWORK CARD NOW WORKS !!!;o) (May be this is the problem I had with hackkernel also there no 3c589_cs eth0 worked...) Little note : on boot many lines with: /lib/scsi_mod.o: unresolved symbol . P.S. This looks like an history becouse I write during test...;o) cu and good work...;o) -- - Franco Silvestro c/o CeSIA - Universita' degli Studi di Bologna
[Cooker] pcmcia.img 20000914 15:32-expert_server_minimum-install with ftp on local mirror ...failed to umount ... and BLACK SCREEN in boot.
Synched 2914 20:00 CEST Ok for 3c589 now configurable...;o) used during installation for test remote lpd.but: Always , as reported ( in console f3 last line is : * installation complete, leaving ) Installation end in console f1 with : console f1 sending termination signals...done sending kill signals...done unmounting filesystems... /proc/bus/usb /mnt/mnt/windows /mnt/boot /mnt/proc /mnt /proc umount failed /tmp/stage2 umount failed failed to umount some filesystem --- and switch off needed...(no big problem but reported;o) THIS IS A BIG PROBLEM Always , as reported (extract of extract inserted...;o) With last two kernel 2.2.17-2 and 2.2.17-3(I'm not sure if it's a kernel problem but is in this time interval that begin the BIG problem) After installation finished I try boot my laptop, I can see for 1 second the boot characters on LCD and after screen become black : pc don't freeze, I see hd led blinking. Blindly somethimes I try shutdown with CTRL ALT CANC and works and somethimes (as NOW) switch off is neededWOW ... no e2fsck...;o) May be I do blindly correct shutdown sequence...;o) This time I tried with minimum server install only to see if LCD was visible during bootNO...quick become black...;o/ >From second cooker install I take /mnt/hdb6/var/log/messages of that boot ... I attach it to this email may be you understand WHY...;o/ cu and good work...;o) - Original Message - [] > Synched from sunsite.uio.no 2914 01:00 CEST > Same problem with this 2.2.17-3 kernel as reported in other relative > bug report (extract inserted) but this time I can't shutdown with CTRL ALT > CANC and I've beautiful colored vertical linesneeded switch off...and > long check on filesystem;o/ (I use that time for write this > report...;o) [] - Original Message - [] >> Synched from sunsite.uio.no 2913 04:00 CEST >> Fresh Install expert developer first time with all, second time with slide at >> minimum >> With last kernel , soon at boot, it disappear screen , I need blindly CTRL >> ALT CANC when hd led stop blinking to shutdown [] -- - Franco Silvestro c/o CeSIA - Universita' degli Studi di Bologna Sep 14 20:58:37 gattosil1 syslogd 1.3-3: restart. Sep 14 20:58:37 gattosil1 syslog: syslogd startup succeeded Sep 14 20:58:37 gattosil1 syslog: klogd startup succeeded Sep 14 20:58:37 gattosil1 kernel: klogd 1.3-3, log source = /proc/kmsg started. Sep 14 20:58:37 gattosil1 kernel: Loaded 7671 symbols from /boot/System.map-2.2.17-3mdksecure. Sep 14 20:58:37 gattosil1 kernel: Symbols match kernel version 2.2.17. Sep 14 20:58:37 gattosil1 kernel: Loaded 92 symbols from 5 modules. Sep 14 20:58:37 gattosil1 kernel: Linux version 2.2.17-3mdksecure ([EMAIL PROTECTED]) (gcc version 2.95.3 19991030 (prerelease)) #1 SMP Wed Sep 13 18:00:02 CEST 2000 Sep 14 20:58:37 gattosil1 kernel: mapped APIC to e000 (002e8000) Sep 14 20:58:37 gattosil1 kernel: Detected 651493 kHz processor. Sep 14 20:58:37 gattosil1 kernel: ide_setup: ide1=autotune Sep 14 20:58:37 gattosil1 kernel: ide_setup: ide0=autotune Sep 14 20:58:37 gattosil1 kernel: Console: colour VGA+ 80x25 Sep 14 20:58:37 gattosil1 kernel: Calibrating delay loop... 1300.89 BogoMIPS Sep 14 20:58:37 gattosil1 kernel: Memory: 516648k/524224k available (1312k kernel code, 424k reserved, 5680k data, 160k init, 0k bigmem) Sep 14 20:58:37 gattosil1 kernel: Dentry hash table entries: 65536 (order 7, 512k) Sep 14 20:58:37 gattosil1 kernel: Buffer cache hash table entries: 524288 (order 9, 2048k) Sep 14 20:58:37 gattosil1 kernel: Page cache hash table entries: 131072 (order 7, 512k) Sep 14 20:58:37 gattosil1 kernel: VFS: Diskquotas version dquot_6.4.0 initialized Sep 14 20:58:37 gattosil1 kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Sep 14 20:58:37 gattosil1 kernel: Checking 'hlt' instruction... OK. Sep 14 20:58:37 gattosil1 kernel: POSIX conformance testing by UNIFIX Sep 14 20:58:37 gattosil1 kernel: mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED]) Sep 14 20:58:37 gattosil1 kernel: Intel machine check architecture supported. Sep 14 20:58:37 gattosil1 kernel: Intel machine check reporting enabled on CPU#0. Sep 14 20:58:37 gattosil1 kernel: per-CPU timeslice cutoff: 50.01 usecs. Sep 14 20:58:37 gattosil1 kernel: CPU0: Intel Pentium III (Coppermine) stepping 01 Sep 14 20:58:37 gattosil1 kernel: SMP motherboard not detected. Using dummy APIC emulation. Sep 14 20:58:37 gattosil1 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1 Sep 14 20:58:37 gattosil1 kernel: PCI: Using configuration type 1 Sep 14 20:58:37 gattosil1 kernel: PCI: Probing PCI hardware Sep 14 20:58:37 gattosil1 kernel: Linux NET4.0 for Linux 2.2 Sep 14 20:58:37 gattosil1 kernel: Based upon Swansea University Computer Society NET3.039 Sep 14 20:58:37 gattos
Re: [Cooker] pcmcia.img 20000913 19:18 - pcmcia 3c589_cs always not configurable...
Now I tried with hd.img in end of installation I have on console f1 same messages of first bug report "failed umount some filesystems", may be is important that on console f4 I see initial probing infos : after <30> messages of correct cardmgr probing on socket 1and insmoding of /modules/3c589_cs.o, correct <6> parameter messages (io, irq and hw_addr) , there are some <30> cardmgr messages with : ...: executing : './network start eth0' ...: + ./network: /etc/sysconfig/network-script/ifup: not found ...: start cmd exited with status 2 ...: exiting may be before with pcmcia.img were scrolled away;o) P.S. Same problem with this 2.2.17-3 kernel as reported in other relative bug report (extract inserted) but this time I can't shutdown with CTRL ALT CANC and I've beautiful colored vertical linesneeded switch off...and long check on filesystem;o/ (I use that time for write this report...;o) - Original Message - From: "Franco Silvestro" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: "Chmouel Boudjnah" <[EMAIL PROTECTED]> Sent: Wednesday, September 13, 2000 7:24 AM Subject: [Cooker] kernel-pcmcia-cs-2.2.17-2 Problem with frame buffer in last kernel > Synched from sunsite.uio.no 2913 04:00 CEST > Fresh Install expert developer first time with all, second time with slide at > minimum > With last kernel , soon at boot, it disappear screen , I need blindly CTRL > ALT CANC when hd led stop blinking to shutdown [] P.P.S. With precedent hackkernel (first time that I try it this afternoon ...awaiting your upgrades...;o) I can boot my laptop and also with XFree4 and little modifies on XF86config-4 I can use my laptop 15.4" LCD (Samsung LTN154E1-L01) with correct 1280*1024 resolution and optimum speed gnome screensavers flies;o) With Hackkernel KDE freeze in starting...;o/ but gnome works;o) I had also problems with 3c589, but I stop testing when I've seen mirror mdkinst and kernel upgrading;o) cu and good work ...I go sleep three o four hours;o) -- - Franco Silvestro c/o CeSIA - Universita' degli Studi di Bologna
[Cooker] pcmcia.img 20000913 19:18 - pcmcia 3c589_cs always not configurable...
Synched on sunsite 2913 23:20 CEST It looks like my precedent bug report...;o/ I try on my laptop with pcmcia.img to make ftp install with my synched mirror on local network , I select ftp and 3c589_cs from list but : console f1 is freeze with "Starting" dialog "Please wait..." I can't switch on console f2 console f3 last lines: * running: /bin/insmod /bin/insmod /modules/3c589_cs.o * ack! loadDriveDriver() worked but didn't load a DRIVE_NET!! * method selection completed * error in exec of second stage loader :-( * error:No such file or directory console f4 last lines: <30>Sep 13 23:29:50 cardmgr[17]: initializing socket 1 <6>cs: memory probe 0xa000-0xa0ff: clean <30>Sep 13 23:29:50 cardmgr[17]: socket 1: 3Com 589 Ethernet <30>Sep 13 23:29:51 cardmgr[17]: executing: 'insmod /modules/3c589_cs.o' <30>Sep 13 23:29:51 cardmgr[17]: insmod exited on signal 11 <30>Sep 13 23:29:51 cardmgr[17]: executing 'modprobe 3c589_cs' <30>Sep 13 23:29:51 cardmgr[17]: modprobe exited on signal 11 <30>Sep 13 23:29:52 cardmgr[17]: get dev info on socket 1 failed: Resource temporarily unavaiable console f5 last lines: testing for /modules/3c589_cs.o not found /modules/3c589_cs.o try with /tmp/3c589_cs.o Hope this can help...;o) cu and good work ...;o) Now I try with hd.img with same mirror on local ext2 partition without configure net during install P.S. This is a recent bug, before I had no trouble with cooker and 3c589...;o) - Original Message - From: "Franco Silvestro" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Tuesday, September 12, 2000 12:51 AM Subject: [Cooker] pcmcia.img 2911 18:45-expert_install or rescue- pcmcia 3c589 not configurable...and at the end (also with hd.img) /proc umount failed > Synched on sunsite 2911 23:59 CEST > With last two version of installer I can't configure 3c589 during install : > with pcmcia.img if I try with ftp there is 3c589-cs in list but fail > autoprobe and I can't configure it. If I use mirror on hd (also with > pcmcia.img) in configure local network there isn't in list(at beginning > 3c589 was recognized on pcmcia slot 1). > * running: /bin/insmod /bin/insmod /modules/3c589_cs.o 3c589_cs > * ack! loadDriveDriver() worked but didn't load a DRIVE_NET!! > * method selection completed > * state saved to /tmp > * error in exec of second stage loader :-( > * error:No such file or directory > and installer stops...;o/ > > > If I bypass network install using mirror on hd (also with hd.img) at the end > of installer when unmounting filesystems last lines was : > /proc umount failed > /tmp/stage2 umount failed > failed to umount some filesystem > > (also seen in last two or three versions of installer...) > > cu.Good work...;o) > > -- > - > Franco Silvestro > c/o CeSIA - Universita' degli Studi di Bologna > > >
[Cooker] pcmcia.img 20000911 18:45-expert_install or rescue- pcmcia 3c589 not configurable...and at the end (also with hd.img) /proc umount failed
Synched on sunsite 2911 23:59 CEST With last two version of installer I can't configure 3c589 during install : with pcmcia.img if I try with ftp there is 3c589-cs in list but fail autoprobe and I can't configure it. If I use mirror on hd (also with pcmcia.img) in configure local network there isn't in list(at beginning 3c589 was recognized on pcmcia slot 1). * running: /bin/insmod /bin/insmod /modules/3c589_cs.o 3c589_cs * ack! loadDriveDriver() worked but didn't load a DRIVE_NET!! * method selection completed * state saved to /tmp * error in exec of second stage loader :-( * error:No such file or directory and installer stops...;o/ If I bypass network install using mirror on hd (also with hd.img) at the end of installer when unmounting filesystems last lines was : /proc umount failed /tmp/stage2 umount failed failed to umount some filesystem (also seen in last two or three versions of installer...) cu.Good work...;o) -- - Franco Silvestro c/o CeSIA - Universita' degli Studi di Bologna
Re: [Cooker] pcmcia.img 20000904 15:53 usual problem in upgrade with find_root_part
On Tue, 05 Sep 2000, you wrote: > Franco Silvestro <[EMAIL PROTECTED]> writes: > > In my laptop I've two cooker install (two root partitions) : expert > > upgrade installer choose automatically hdb1 as /boot and hdb6 as root but > > if I want > > doesn't it propose? > > it should: > > $o->ask_from_listf(_("Root Partition"), >_("What is the root partition (/) of your system?"), >\&partition_table_raw::description, >[ install_any::find_root_parts($o->{hds}, $o->{prefix}) >]) or die > "setstep exitInstall\n"; > > can you give the lines containing suggest_mount_points in the ddebug.log? * suggest_mount_points: hdb1 -> /boot * suggest_mount_points: hdb6 -> / * suggest_mount_points: hdb7 -> /mnt/hdb7 * suggest_mount_points: hdb9 -> /mnt/hdb9 * suggest_mount_points: hdb10 -> /mnt/hd -- - Franco Silvestro c/o CeSIA - Universita' degli Studi di Bologna mailto:[EMAIL PROTECTED]
Re: [Cooker] pcmcia.img 20000904 15:53 usual problem in upgrade with find_root_part
Franco Silvestro <[EMAIL PROTECTED]> writes: > In my laptop I've two cooker install (two root partitions) : expert upgrade > installer choose automatically hdb1 as /boot and hdb6 as root but if I want doesn't it propose? it should: $o->ask_from_listf(_("Root Partition"), _("What is the root partition (/) of your system?"), \&partition_table_raw::description, [ install_any::find_root_parts($o->{hds}, $o->{prefix}) ]) or die "setstep exitInstall\n"; can you give the lines containing suggest_mount_points in the ddebug.log?
[Cooker] pcmcia.img 20000904 15:53 usual problem in upgrade with find_root_part
In my laptop I've two cooker install (two root partitions) : expert upgrade installer choose automatically hdb1 as /boot and hdb6 as root but if I want upgrade hdb7 as boot and hdb9 as root I need manually mount partitions in shell console.;o) May be better a confirmation before auto-choose...;o) -- - Franco Silvestro c/o CeSIA - Universita' degli Studi di Bologna mailto:[EMAIL PROTECTED]