Try to mount it with these command :
[root@desktop kernell32]# umount /mnt/cdrom
[root@desktop kernell32]# mount /dev/sda4 -t vfat /mnt/cdrom
On Mon, 16 Oct 2000, you wrote:
> I get io errors when trying to access my removable drives if this
> problem is known ignore this message =)
> All my drives f***ed up whn i try to access them i get io errors even
> thow they are detected
> in kde its "you dont have access permission to this location"
>
> [root@desktop kernell32]# cd /mnt/cdrom
> bash: cd: /mnt/cdrom: Input/output error
> [root@desktop kernell32]# dmesg
> Linux version 2.2.17-11mdk ([EMAIL PROTECTED]) (gcc version
> 2.95.3 19991030 (prerelease)) #1 Wed Sep 20 13:03:45 CEST 2000
> Detected 553899 kHz processor.
> ide_setup: hdd=ide-scsi
> Console: colour VGA+ 80x25
> Calibrating delay loop... 1104.28 BogoMIPS
> Memory: 127576k/131072k available (1216k kernel code, 416k reserved,
> 1724k data, 140k init, 0k bigmem)
> Dentry hash table entries: 16384 (order 5, 128k)
> Buffer cache hash table entries: 131072 (order 7, 512k)
> Page cache hash table entries: 32768 (order 5, 128k)
> VFS: Diskquotas version dquot_6.4.0 initialized
> CPU: L1 I Cache: 64K L1 D Cache: 64K
> CPU: L2 Cache: 512K
> CPU: AMD Athlon(tm) Processor stepping 01
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
> PCI: PCI BIOS revision 2.10 entry at 0xfd9e1, last bus=1
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: Enabling I/O for device 00:00
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> TCP: Hash tables configured (ehash 131072 bhash 65536)
> Initializing RT netlink socket
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> pty: 256 Unix98 ptys configured
> apm: BIOS not found.
> Real Time Clock Driver v1.09
> RAM disk driver initialized: 16 RAM disks of 4096K size
> Uniform Multi-Platform E-IDE driver Revision: 6.30
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> VP_IDE: IDE controller on PCI bus 00 dev 21
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> AMD IronGate
> Chipset Core ATA-66
> Split FIFO Configuration: 8 Primary buffers, threshold = 1/2
>8 Second. buffers, threshold = 1/2
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide0: VIA Bus-Master (U)DMA Timing Config Success
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
> ide1: VIA Bus-Master (U)DMA Timing Config Success
> hda: ST320423A, ATA DISK drive
> hdc: QUANTUM FIREBALL CR8.4A, ATA DISK drive
> hdd: Hewlett-Packard CD-Writer Plus 7500, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: ST320423A, 19536MB w/512kB Cache, CHS=2490/255/63
> hdc: QUANTUM FIREBALL CR8.4A, 8063MB w/418kB Cache, CHS=16383/16/63
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
> raid5: measuring checksumming speed
> raid5: MMX detected, trying high-speed MMX checksum routines
>pII_mmx : 1270.635 MB/sec
>p5_mmx: 1592.199 MB/sec
>8regs : 738.759 MB/sec
>32regs: 649.224 MB/sec
> using fastest function: p5_mmx (1592.199 MB/sec)
> scsi : 0 hosts.
> scsi : detected total.
> md.c: sizeof(mdp_super_t) = 4096
> Partition check:
> hda: hda1 hda2 < hda5 hda6 hda7 >
> hdc: [PTBL] [1027/255/63] hdc1
> autodetecting RAID arrays
> autorun ...
> autorun DONE.
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 140k freed
> Adding Swap: 248968k swap-space (priority -1)
> es1371: version v0.22 time 13:09:54 Sep 20 2000
> es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x06
> es1371: found es1371 rev 6 at io 0xd000 irq 9
> es1371: features: joystick 0x0
> es1371: codec vendor CRY (0x435259) revision 19 (0x13)
> es1371: codec features Headphone out 20bit DAC 18bit ADC
> es1371: stereo enhancement: Crystal Semiconductor 3D Stereo Enhancement
> ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
> http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
> ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xcc00, IRQ 10.
> eth0: RealTek RTL-8029 found at 0xcc00, IRQ 10, 00:00:E8:72:C2:6B.
> usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> usb-uhci.c: $Revision: 1.232 $ time 13:10:49 Sep 20 2000
> usb-uhci.c: High bandwidth mode enabled
> usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10
> usb-uhci.c: Detected 2 ports
> usb.c: new USB bus registered, assigned b
