Re: [coreboot] AMD Geode LX800 - CS5536 with Coreboot v3?
On 01/30/2014 09:41 AM, Darmawan Salihun wrote: Hi all, Is it still possible to use Coreboot v3 for an AMD Geode LX800-CS5536 board? Or do I have to resort to other Coreboot version? You might be very much on your own just with the v3 build environment. I think bachmann/ot200 board is one of the most recent boards with Geode LX + CS5536 and some testing on coreboot v4. I have all the required datasheet and circuit diagram to do the port. The board is a custom board, not from any of the usual motherboard manufacturers. Kind Regards, Darmawan BTW.. Thanks for your excellent articles at InfoSec on the topic of System Address map initialization on PCI. Kyösti -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
Re: [coreboot] AMD Geode LX800 - CS5536 with Coreboot v3?
Hi Kyosti, On 1/30/14, Kyösti Mälkki kyosti.mal...@gmail.com wrote: On 01/30/2014 09:41 AM, Darmawan Salihun wrote: Hi all, Is it still possible to use Coreboot v3 for an AMD Geode LX800-CS5536 board? Or do I have to resort to other Coreboot version? You might be very much on your own just with the v3 build environment. I think bachmann/ot200 board is one of the most recent boards with Geode LX + CS5536 and some testing on coreboot v4. OK. I'll have a look at Coreboot v4. Is this where to clone it from: http://review.coreboot.org/coreboot.git ?? I have all the required datasheet and circuit diagram to do the port. The board is a custom board, not from any of the usual motherboard manufacturers. Kind Regards, Darmawan BTW.. Thanks for your excellent articles at InfoSec on the topic of System Address map initialization on PCI. Sure. Nice to hear people benefited from it. Kind Regards, Darmawan -= Знания людей принадлежат миру =- [-Human knowledge belongs to the world-] -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
Re: [coreboot] AMD Geode LX800 - CS5536 with Coreboot v3?
2014-01-30 Darmawan Salihun darmawan.sali...@gmail.com: Is this where to clone it from: http://review.coreboot.org/coreboot.git You can find cloning instructions, and how to contribute/push changes, on this wiki page: http://www.coreboot.org/Git HTH, Idwer -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
Re: [coreboot] Unable to start correctly coreboot on Asus f2a85-m REV 1.02
Is it Richland or Trinity? Seems it is Richland. I haven't tried with Richland yet. Yes indeed it's Richland. It would be helpful if you could include log from serial console. Maybe you hit some other problem. How without serial port? You can also try to put memory only to blue slots. Okay I'll test this. Mine board is also 1.02 version. I think something wrong is with memory setup or cpu setup. Does original BIOS use 1.65V for DDR2 memory? You should select that in configuration too. In the original bios I saw 1.5V for DDR3 memory. But I'll look and test it. Thanks. 2014-01-29 Rudolf Marek r.ma...@assembler.cz: Hi, _F2A85-M REV 1.02 _AMD A8-6600K APU (Radeon HD 8570D vga = 1002,990e) _Corsair Value Select 4 Go DDR3 1333 MHz CL9 (CMV4GX3M1A1333C9) Is it Richland or Trinity? Seems it is Richland. I haven't tried with Richland yet. I proceeded to build a standard coreboot image using seabios as a payload (using a local copy of the VGA bios and embedding this into the coreboot image), leaving all the settings as default apart from selecting the motherboard, upon writing this to the flash and rebooting the machine I had no output from the VGA HDMI adapter and and my keyboard is frozen. It would be helpful if you could include log from serial console. Maybe you hit some other problem. You can also try to put memory only to blue slots. Can you send me a link to a known-good image that you use? So that i can verify my hardware is compatible. Does he work the revision 1.02 of this motherboard in coreboot? Mine board is also 1.02 version. I think something wrong is with memory setup or cpu setup. Does original BIOS use 1.65V for DDR2 memory? You should select that in configuration too. You can come to IRC #coreboot on freenode.net I'm here until midnight GMT+2 Thanks Rudolf Thank you for your help. -- Best regards, HacKurx www.hackurx.info -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
Re: [coreboot] AMD Geode LX800 - CS5536 with Coreboot v3?
Hi 2014-01-30 Darmawan Salihun darmawan.sali...@gmail.com: Hi Kyosti, On 1/30/14, Kyösti Mälkki kyosti.mal...@gmail.com wrote: On 01/30/2014 09:41 AM, Darmawan Salihun wrote: Hi all, Is it still possible to use Coreboot v3 for an AMD Geode LX800-CS5536 board? Or do I have to resort to other Coreboot version? You might be very much on your own just with the v3 build environment. I think bachmann/ot200 board is one of the most recent boards with Geode LX + CS5536 and some testing on coreboot v4. I am the maintainer of the bachmann/ot200 mainboard and current git runs well on the device. OK. I'll have a look at Coreboot v4. Is this where to clone it from: http://review.coreboot.org/coreboot.git http://review.coreboot.org/gitweb?p=coreboot.git greets -- Christian Gmeiner, MSc -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
Re: [coreboot] AMD Geode LX800 - CS5536 with Coreboot v3?
Hi Christian, On 1/30/14, Christian Gmeiner christian.gmei...@gmail.com wrote: Hi ... Is it still possible to use Coreboot v3 for an AMD Geode LX800-CS5536 board? Or do I have to resort to other Coreboot version? You might be very much on your own just with the v3 build environment. I think bachmann/ot200 board is one of the most recent boards with Geode LX + CS5536 and some testing on coreboot v4. I am the maintainer of the bachmann/ot200 mainboard and current git runs well on the device. OK. I'll have a look at Coreboot v4. Is this where to clone it from: http://review.coreboot.org/coreboot.git http://review.coreboot.org/gitweb?p=coreboot.git OK. Thanks a lot. Kind Regards, Darmawan -= Знания людей принадлежат миру =- [-Human knowledge belongs to the world-] -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
[coreboot] stylus support on x60 tablet
Hi, I'm gathering information as per request on behalf of an existing x60t user (he does not yet have coreboot). He wonders, if work is being done to support the stylus function on an x60 tablet machine. If no work is currently being done (and noone is interested) he wonders who would be able to implement it regardless (he is happy to pay for this to be done). The wiki mentions that this is WIP but does not seem to link to any relevant information. It does link here http://forum.bongofish.co.uk/index.php?topic=2307.0 and here http://www.thinkwiki.org/wiki/Wacom_Serial_Tablet_PC_Stylus which seems to contain some information. The first link seems to show some datasheets/schematics. Who should I contact regarding further development? -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
Re: [coreboot] Unable to start correctly coreboot on Asus f2a85-m REV 1.02
On 30.1.2014 11:03, HacKurx wrote: Is it Richland or Trinity? Seems it is Richland. I haven't tried with Richland yet. Yes indeed it's Richland. It would be helpful if you could include log from serial console. Maybe you hit some other problem. How without serial port? No way. You will need to use serial port. Just plug the header to mainboard and use some USB 2 serial from other computer (together with null modem cable) if you need more info please let me know. Is it Richland or Trinity? Seems it is Richland. I haven't tried with Richland yet. It looks some people can send me some money and I could buy the richland to see if it workks... but this could happen somewhere in March. Can you send me a link to a known-good image that you use? So that i can verify my hardware is compatible. The image I sent to you will most likely not POST the image because of different IDs, but X.org could initialize it. Thanks Rudolf -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
Re: [coreboot] stylus support on x60 tablet
The Gluglug wrote: He wonders, if work is being done to support the stylus function on an x60 tablet machine. Not if you're not doing it I don't think. If no work is currently being done (and noone is interested) he wonders who would be able to implement it regardless (he is happy to pay for this to be done). Any coreboot developer. But I suspect that noone has time and interest to do it properly. I guess that money doesn't really make a difference. You could of course get into development. It seems quite likely that the digitizer is a serial device, you can confirm that easily with the factory BIOS, then go looking for how to get that port going with coreboot. This is pretty much the simplest task there is in coreboot. //Peter -- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
