from:"DM365"

[coreboot] minnowboardmax coreboot intel uefi payload :Failed to find the required acpi table

2015-07-06 Thread DM365

Hello!
  I tested intel uefi payload instead of seabios in coreboot minnowboard 
max .
  It failed with Failed to find the required acpi table .
  If I use seabios payload ,the bios runs ok!
  I followed http://www.elinux.org/Minnowboard:MinnowMaxCoreboot; to build 
coreboot.
  I used https://firmware.intel.com/develop/; 
2014-WW26-UEFI.coreboot.Payload.zip to builed uefi in coreboot.
  The whole terminal log is :
   POST: 0x4a
POST: 0x4b
POST: 0x4c
POST: 0x4d
POST: 0x4e
POST: 0x4f
POST: 0x39
POST: 0x80
POST: 0x70
POST: 0x71
POST: 0x72
POST: 0x24
POST: 0x25
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x55
POST: 0x73
APIC: 00 missing read_resources
PCI: 00:00.0 missing set_resources
POST: 0x74
POST: 0x75
POST: 0x75
POST: 0x93
POST: 0x9b
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
Warning: PCI Device 2 does not have an IRQ entry, skipping it
POST: 0x75
POST: 0x75
POST: 0x76
POST: 0x77
find_current_mrc_cache_local: No valid fast boot cache found.
POST: 0x79
POST: 0x9c
POST: 0x9e
POST: 0x9d
POST: 0x7a
POST: 0x7b
POST: 0xf8
PROGRESS CODE: V03020003 I0
Loading PEIM at 0x080EC20 EntryPoint=0x080EE80 CbSupportPeim.efi
PROGRESS CODE: V03020002 I0
0.  - 0FFF [10]
1. 1000 - 0009 [01]
2. 000A - 000F [02]
3. 0010 - 7ACBCFFF [01]
4. 7ACBD000 - 7ADF [10]
5. 7AE0 - 7FFF [02]
6. E000 - EFFF [02]
7. FEB0 - FEC00FFF [02]
8. FED01000 - FED01FFF [02]
9. FED03000 - FED03FFF [02]
10. FED05000 - FED05FFF [02]
11. FED08000 - FED08FFF [02]
12. FED0C000 - FED0 [02]
13. FED1C000 - FED1CFFF [02]
14. FEE0 - FEE00FFF [02]
15. FEF0 - FEFF [02]
16. FF80 -  [02]
Low memory 0x7ACBD000, High Memory 0x0
LowMemorySize: 0x7ACBD000.
HighMemorySize: 0x0.
PeiMemBase: 0x76CB.
PeiMemSize: 0x400.
PeiInstallPeiMemory MemoryBegin 0x76CB, MemoryLength 0x400
Found one valid fv : 0x82.
Install PPI: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
Notify: PPI Guid: 49EDB1C1-BF21-4761-BB12-EB0031AABB39, Peim notify entry 
point: 801BC0
The 1th FV start address is 0x082, size is 0x003E, handle is 
0x82
Install PPI: 7408D748-FC8C-4EE6-9288-C4BEC092A410
Actual Coreboot header: 0x7ACBD000.
Failed to find the required acpi table


PEI_ASSERT!: d:\myworkspace\CorebootModulePkg\CbSupportPei\CbSupportPei.c 
(338): ((BOOLEAN)(0==1))-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot

[coreboot] minnowboardmax coreboot intel uefi payload :Failed to find the required acpi table

2015-07-06 Thread DM365

Hello!
  I tested intel uefi payload instead of seabios in coreboot minnowboard 
max .
  It failed with Failed to find the required acpi table .
  If I use seabios payload ,the bios runs ok!
  I followed http://www.elinux.org/Minnowboard:MinnowMaxCoreboot; to build 
coreboot.
  I used https://firmware.intel.com/develop/; 
2014-WW26-UEFI.coreboot.Payload.zip to builed uefi in coreboot.
  The whole terminal log is :
   POST: 0x4a
POST: 0x4b
POST: 0x4c
POST: 0x4d
POST: 0x4e
POST: 0x4f
POST: 0x39
POST: 0x80
POST: 0x70
POST: 0x71
POST: 0x72
POST: 0x24
POST: 0x25
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x55
POST: 0x73
APIC: 00 missing read_resources
PCI: 00:00.0 missing set_resources
POST: 0x74
POST: 0x75
POST: 0x75
POST: 0x93
POST: 0x9b
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
Warning: PCI Device 2 does not have an IRQ entry, skipping it
POST: 0x75
POST: 0x75
POST: 0x76
POST: 0x77
find_current_mrc_cache_local: No valid fast boot cache found.
POST: 0x79
POST: 0x9c
POST: 0x9e
POST: 0x9d
POST: 0x7a
POST: 0x7b
POST: 0xf8
PROGRESS CODE: V03020003 I0
Loading PEIM at 0x080EC20 EntryPoint=0x080EE80 CbSupportPeim.efi
PROGRESS CODE: V03020002 I0
0.  - 0FFF [10]
1. 1000 - 0009 [01]
2. 000A - 000F [02]
3. 0010 - 7ACBCFFF [01]
4. 7ACBD000 - 7ADF [10]
5. 7AE0 - 7FFF [02]
6. E000 - EFFF [02]
7. FEB0 - FEC00FFF [02]
8. FED01000 - FED01FFF [02]
9. FED03000 - FED03FFF [02]
10. FED05000 - FED05FFF [02]
11. FED08000 - FED08FFF [02]
12. FED0C000 - FED0 [02]
13. FED1C000 - FED1CFFF [02]
14. FEE0 - FEE00FFF [02]
15. FEF0 - FEFF [02]
16. FF80 -  [02]
Low memory 0x7ACBD000, High Memory 0x0
LowMemorySize: 0x7ACBD000.
HighMemorySize: 0x0.
PeiMemBase: 0x76CB.
PeiMemSize: 0x400.
PeiInstallPeiMemory MemoryBegin 0x76CB, MemoryLength 0x400
Found one valid fv : 0x82.
Install PPI: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
Notify: PPI Guid: 49EDB1C1-BF21-4761-BB12-EB0031AABB39, Peim notify entry 
point: 801BC0
The 1th FV start address is 0x082, size is 0x003E, handle is 
0x82
Install PPI: 7408D748-FC8C-4EE6-9288-C4BEC092A410
Actual Coreboot header: 0x7ACBD000.
Failed to find the required acpi table


PEI_ASSERT!: d:\myworkspace\CorebootModulePkg\CbSupportPei\CbSupportPei.c 
(338): ((BOOLEAN)(0==1))-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot

[coreboot] Could not find a bounce buffer tested in minnowmax

2014-10-25 Thread DM365

I'm trying to investigate Coreboot and intel FSP in minnowmax board ,followed 
by 
http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=e6df041b8bf8e37debc0d6a871080b64eea7a372.‍‍
But ,the uart log show :Payload being loaded below 1MiB without region 
being marked as RAM usable. Could not find a bounce buffer... Could not 
load payload‍  The whole debug log is:
POST: 0x4a romstage_main_continue status: 0  hob_list_ptr: 7bb2 FSP Status: 
0x0 Baytrail Chip Variant: Bay Trail-I (ISG/embedded) MRC v0.90 1 channels of 
DDR3 @ 1066MHz POST: 0x4b POST: 0x4c POST: 0x4d CBMEM: root @ 7baff000 254 
entries. POST: 0x4e POST: 0x4f Trying CBFS ramstage loader. CBFS: loading stage 
fallback/ramstage @ 0x10 (270384 bytes), entry @ 0x10 POST: 0x80 POST: 
0x39 coreboot-4.0-6880-ga4a44a7 Tue Sep 16 23:46:12 PDT 2014 booting... POST: 
0x40 clocks_per_usec: 1333 CBMEM: recovering 3/254 entries from root @ 7baff000 
Moving GDT to 7bafc000...ok POST: 0x70 BS: BS_PRE_DEVICE times (us): entry 8070 
run 1170 exit 0 POST: 0x71 CPUID: 00030673 Cores: 2 Revision ID: 0c Stepping: 
B3 msr(17) = 000c90040a38 msr(ce) = 04000a00 BS: BS_DEV_INIT_CHIPS 
times (us): entry 0 run 12482 exit 0 POST: 0x72 Enumerating buses... 
enable_dev(Intel BayTrail SoC, 7) CPU_CLUSTER: 0 enabled enable_dev(Intel 
BayTrail SoC, 6) DOMAIN:  enabled PCI: pci_scan_bus for bus 00 POST: 0x24 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:00.0 [8086/] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:02.0 [8086/0031] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:03.0: Disabling device: 03.0 Power 
management CAP offset 0x80. enable_dev(Intel BayTrail SoC, 2) PCI: 00:10.0: 
Disabling device: 10.0 Power management CAP offset 0x80. enable_dev(Intel 
BayTrail SoC, 2) PCI: 00:11.0: Disabling device: 11.0 Power management CAP 
offset 0x80. enable_dev(Intel BayTrail SoC, 2) PCI: 00:12.0 [8086/0f16] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:13.0 [8086/0f23] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:14.0 [8086/0f35] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:15.0 [8086/0f28] enabled PCI: 00:16.0 
[8086/0f37] enabled enable_dev(Intel BayTrail SoC, 2) PCI: 00:17.0: Disabling 
device: 17.0 Power management CAP offset 0x80. enable_dev(Intel BayTrail SoC, 
2) PCI: 00:18.0 [8086/0f40] enabled enable_dev(Intel BayTrail SoC, 2) PCI: 
00:18.1: Disabling device: 18.1 Power management CAP offset 0x80. 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:18.2: Disabling device: 18.2 Power 
management CAP offset 0x80. enable_dev(Intel BayTrail SoC, 2) PCI: 00:18.3: 
Disabling device: 18.3 Power management CAP offset 0x80. enable_dev(Intel 
BayTrail SoC, 2) PCI: 00:18.4: Disabling device: 18.4 Power management CAP 
offset 0x80. enable_dev(Intel BayTrail SoC, 2) PCI: 00:18.5: Disabling device: 
18.5 Power management CAP offset 0x80. enable_dev(Intel BayTrail SoC, 2) PCI: 
00:18.6 [8086/0f46] enabled enable_dev(Intel BayTrail SoC, 2) PCI: 00:18.7 
[8086/0f47] enabled enable_dev(Intel BayTrail SoC, 2) PCI: Static device PCI: 
00:1a.0 not found, disabling it. enable_dev(Intel BayTrail SoC, 2) PCI: 
00:1b.0: Disabling device: 1b.0 PCI: 00:1b.0 [8086/0f04] disabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1c.0: Disabling device: 1c.0 Power 
management CAP offset 0xa0. PCI: 00:1c.0 subordinate bus PCI Express PCI: 
00:1c.0 [8086/0f48] disabled enable_dev(Intel BayTrail SoC, 2) PCI: 00:1c.1: 
Disabling device: 1c.1 Power management CAP offset 0xa0. enable_dev(Intel 
BayTrail SoC, 2) PCI: 00:1c.2 subordinate bus PCI Express PCI: 00:1c.2 
[8086/0f4c] enabled enable_dev(Intel BayTrail SoC, 2) PCI: Static device PCI: 
00:1c.3 not found, disabling it. enable_dev(Intel BayTrail SoC, 2) PCI: 
00:1d.0: Disabling device: 1d.0 Power management CAP offset 0x70. 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.0 [8086/0f06] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.1 [8086/0f08] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.2 [8086/0f09] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.3 [8086/0f0a] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.4 [8086/0f0c] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.5 [8086/0f0e] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1f.0 [8086/0f1c] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1f.3 [8086/0f12] enabled POST: 0x25 
PCI: pci_scan_bus for bus 01 POST: 0x24 PCI: 01:00.0 [10ec/8168] enabled POST: 
0x25 PCI: pci_scan_bus returning with max=001 POST: 0x55 PCI: pci_scan_bus 
returning with max=001 POST: 0x55 done BS: BS_DEV_ENUMERATE times (us): entry 0 
run 329939 exit 0 POST: 0x73 found VGA at PCI: 00:02.0 Setting up VGA for PCI: 
00:02.0 Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN:  Setting 
PCI_BRIDGE_CTL_VGA for bridge Root Device Allocating resources... Reading 
resources... APIC: 00 missing read_resources Done reading resources. Setting 
resources... PCI: 00:02.0 10 - [0x00f000 - 0x00f03f] size 0x0040 
gran 0x16 mem

[coreboot] Could not find a bounce buffer tested in minnowmax

2014-09-17 Thread DM365

I'm trying to investigate Coreboot and intel FSP in minnowmax board ,followed 
by 
http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=e6df041b8bf8e37debc0d6a871080b64eea7a372.‍‍
But ,the uart log show :Payload being loaded below 1MiB without region 
being marked as RAM usable. Could not find a bounce buffer... Could not 
load payload‍  The whole debug log is:
POST: 0x4a romstage_main_continue status: 0  hob_list_ptr: 7bb2 FSP Status: 
0x0 Baytrail Chip Variant: Bay Trail-I (ISG/embedded) MRC v0.90 1 channels of 
DDR3 @ 1066MHz POST: 0x4b POST: 0x4c POST: 0x4d CBMEM: root @ 7baff000 254 
entries. POST: 0x4e POST: 0x4f Trying CBFS ramstage loader. CBFS: loading stage 
fallback/ramstage @ 0x10 (270384 bytes), entry @ 0x10 POST: 0x80 POST: 
0x39 coreboot-4.0-6880-ga4a44a7 Tue Sep 16 23:46:12 PDT 2014 booting... POST: 
0x40 clocks_per_usec: 1333 CBMEM: recovering 3/254 entries from root @ 7baff000 
Moving GDT to 7bafc000...ok POST: 0x70 BS: BS_PRE_DEVICE times (us): entry 8070 
run 1170 exit 0 POST: 0x71 CPUID: 00030673 Cores: 2 Revision ID: 0c Stepping: 
B3 msr(17) = 000c90040a38 msr(ce) = 04000a00 BS: BS_DEV_INIT_CHIPS 
times (us): entry 0 run 12482 exit 0 POST: 0x72 Enumerating buses... 
enable_dev(Intel BayTrail SoC, 7) CPU_CLUSTER: 0 enabled enable_dev(Intel 
BayTrail SoC, 6) DOMAIN:  enabled PCI: pci_scan_bus for bus 00 POST: 0x24 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:00.0 [8086/] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:02.0 [8086/0031] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:03.0: Disabling device: 03.0 Power 
management CAP offset 0x80. enable_dev(Intel BayTrail SoC, 2) PCI: 00:10.0: 
Disabling device: 10.0 Power management CAP offset 0x80. enable_dev(Intel 
BayTrail SoC, 2) PCI: 00:11.0: Disabling device: 11.0 Power management CAP 
offset 0x80. enable_dev(Intel BayTrail SoC, 2) PCI: 00:12.0 [8086/0f16] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:13.0 [8086/0f23] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:14.0 [8086/0f35] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:15.0 [8086/0f28] enabled PCI: 00:16.0 
[8086/0f37] enabled enable_dev(Intel BayTrail SoC, 2) PCI: 00:17.0: Disabling 
device: 17.0 Power management CAP offset 0x80. enable_dev(Intel BayTrail SoC, 
2) PCI: 00:18.0 [8086/0f40] enabled enable_dev(Intel BayTrail SoC, 2) PCI: 
00:18.1: Disabling device: 18.1 Power management CAP offset 0x80. 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:18.2: Disabling device: 18.2 Power 
management CAP offset 0x80. enable_dev(Intel BayTrail SoC, 2) PCI: 00:18.3: 
Disabling device: 18.3 Power management CAP offset 0x80. enable_dev(Intel 
BayTrail SoC, 2) PCI: 00:18.4: Disabling device: 18.4 Power management CAP 
offset 0x80. enable_dev(Intel BayTrail SoC, 2) PCI: 00:18.5: Disabling device: 
18.5 Power management CAP offset 0x80. enable_dev(Intel BayTrail SoC, 2) PCI: 
00:18.6 [8086/0f46] enabled enable_dev(Intel BayTrail SoC, 2) PCI: 00:18.7 
[8086/0f47] enabled enable_dev(Intel BayTrail SoC, 2) PCI: Static device PCI: 
00:1a.0 not found, disabling it. enable_dev(Intel BayTrail SoC, 2) PCI: 
00:1b.0: Disabling device: 1b.0 PCI: 00:1b.0 [8086/0f04] disabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1c.0: Disabling device: 1c.0 Power 
management CAP offset 0xa0. PCI: 00:1c.0 subordinate bus PCI Express PCI: 
00:1c.0 [8086/0f48] disabled enable_dev(Intel BayTrail SoC, 2) PCI: 00:1c.1: 
Disabling device: 1c.1 Power management CAP offset 0xa0. enable_dev(Intel 
BayTrail SoC, 2) PCI: 00:1c.2 subordinate bus PCI Express PCI: 00:1c.2 
[8086/0f4c] enabled enable_dev(Intel BayTrail SoC, 2) PCI: Static device PCI: 
00:1c.3 not found, disabling it. enable_dev(Intel BayTrail SoC, 2) PCI: 
00:1d.0: Disabling device: 1d.0 Power management CAP offset 0x70. 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.0 [8086/0f06] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.1 [8086/0f08] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.2 [8086/0f09] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.3 [8086/0f0a] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.4 [8086/0f0c] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1e.5 [8086/0f0e] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1f.0 [8086/0f1c] enabled 
enable_dev(Intel BayTrail SoC, 2) PCI: 00:1f.3 [8086/0f12] enabled POST: 0x25 
PCI: pci_scan_bus for bus 01 POST: 0x24 PCI: 01:00.0 [10ec/8168] enabled POST: 
0x25 PCI: pci_scan_bus returning with max=001 POST: 0x55 PCI: pci_scan_bus 
returning with max=001 POST: 0x55 done BS: BS_DEV_ENUMERATE times (us): entry 0 
run 329939 exit 0 POST: 0x73 found VGA at PCI: 00:02.0 Setting up VGA for PCI: 
00:02.0 Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN:  Setting 
PCI_BRIDGE_CTL_VGA for bridge Root Device Allocating resources... Reading 
resources... APIC: 00 missing read_resources Done reading resources. Setting 
resources... PCI: 00:02.0 10 - [0x00f000 - 0x00f03f] size 0x0040 
gran 0x16 mem

[coreboot] minnowboardmax coreboot intel uefi payload :Failed to find the required acpi table

[coreboot] minnowboardmax coreboot intel uefi payload :Failed to find the required acpi table

[coreboot] Could not find a bounce buffer tested in minnowmax

[coreboot] Could not find a bounce buffer tested in minnowmax

4 matches

Site Navigation

Mail list logo

Footer information