Smoke [blead] v5.27.2-122-g367917954d PASS HP-UX B.11.31/64 (ia64/2 cpu)

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
367917954ddd5b3c7085e1a814b02065191c7c38 v5.27.2-122-g367917954d
x2: ia64 (ia64/2 cpu)
onHP-UX - B.11.31/64
using ccache cc version B3910B A.06.28.02
smoketime 10 hours 5 minutes (average 1 hour 15 minutes)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-122-g367917954d  Configuration (common) none
--- -
O O O O O O 
O O O O O O -Duse64bitall
O O O O O O -Duseithreads
O O O O O O -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = univ.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = univ.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE367917954ddd5b3c7085e1a814b02065191c7c38

Testsuite was run only with 'harness'

Passed Todo tests: (common-args) none
[stdio/perlio] 
[stdio/perlio] -DDEBUGGING
[stdio/perlio] -Duse64bitall
[stdio/perlio] -DDEBUGGING -Duse64bitall
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitall
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitall
../dist/Net-Ping/t/450_service.tPASSED
9, 18

[univ.utf8] 
[univ.utf8] -DDEBUGGING
[univ.utf8] -Duse64bitall
[univ.utf8] -DDEBUGGING -Duse64bitall
[univ.utf8] -Duseithreads
[univ.utf8] -DDEBUGGING -Duseithreads
[univ.utf8] -Duseithreads -Duse64bitall
[univ.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2
../dist/Net-Ping/t/450_service.tPASSED
9, 18

Compiler messages(hpux):


Non-Fatal messages(hpux):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.70_01 running on perl 5.14.2
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 PASS linux 3.10.0-514.21.1.el7.x86_64 [CentOS Linux 7.3.1611 (x86_64/1 cpu[12 cores])

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
lx02: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (GenuineIntel 1345MHz) (x86_64/1 
cpu[12 cores])
onlinux - 3.10.0-514.21.1.el7.x86_64 [CentOS Linux 7.3.1611 (Core)]
using g++ version 4.8.5 20150623 (Red Hat 4.8.5-11)
smoketime 2 hours 40 minutes (average 20 minutes 1 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) -Dcc=g++
--- -
O O O O O O 
O O O O O O -Duse64bitall -Duselongdouble
O O O O O O -Duseithreads
O O O O O O -Duseithreads -Duse64bitall -Duselongdouble
| | | | | +- LC_ALL = en_US.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = en_US.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

MANIFEST did not declare 'Conf'
MANIFEST did not declare 'Conf-gcc'
MANIFEST did not declare 'MANIFEST.new'
MANIFEST did not declare 'Rsync'
MANIFEST did not declare 'merijn/Configure'
MANIFEST did not declare 'merijn/Glossary'
MANIFEST did not declare 'merijn/config.sh'
MANIFEST did not declare 'merijn/config_h.SH'
MANIFEST did not declare 'mkovz.pl'
MANIFEST did not declare 'mktest'
MANIFEST did not declare 'mktest1'
MANIFEST did not declare 'rm.sh'
MANIFEST did not declare 'smoke.env'
MANIFEST did not declare 'smoke.sh'

Passed Todo tests: (common-args) -Dcc=g++
[en_US.utf8] 
[en_US.utf8] -DDEBUGGING
[en_US.utf8] -Duse64bitall -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duse64bitall -Duselongdouble
[en_US.utf8] -Duseithreads
[en_US.utf8] -DDEBUGGING -Duseithreads
[en_US.utf8] -Duseithreads -Duse64bitall -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duseithreads -Duse64bitall -Duselongdouble
../lib/B/Deparse.t..PASSED
2

Compiler messages(gcc):
Pattern(gcc): /(^(?-s:.+?):(?: In function .+?:$|(?: undefined reference to 
.+?$)|\d+(?:\:\d+)?: (?:warning:|error:|note:|invalid) .+?$))/

Non-Fatal messages(gcc):



-- 
Report by Test::Smoke v1.71_01 running on perl 5.26.0
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-122-g3679179 FAIL(FM) MSWin32 Win7 Professional (Intel64/8 cpu)

2017-08-08 Thread mauke
Automated smoke report for branch blead 5.27.3 patch 
367917954ddd5b3c7085e1a814b02065191c7c38 v5.27.2-122-g3679179
bulk: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz(~2693 MHz) (Intel64/8 cpu)
onMSWin32 - Win7 Professional (64-bit) SP1
using gcc version 4.9.2
smoketime 2 hours (average 15 minutes 6 seconds)

Summary: FAIL(FM)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-122-g3679179  Configuration (common) none
--- -
M M 
F F -Duselargefiles
M M -Duseithreads
F F -Duseithreads -Duselargefiles
| +- -DDEBUGGING
+--- no debugging


Locally applied patches:
SMOKE367917954ddd5b3c7085e1a814b02065191c7c38

Tests skipped on user request:
# One test name on a line
cpan/IO-Compress/t/105oneshot-bzip2.t   IO::Compress
cpan/IO-Compress/t/105oneshot-deflate.t IO::Compress
cpan/IO-Compress/t/105oneshot-gzip.tIO::Compress
cpan/IO-Compress/t/105oneshot-gzip-only.t   IO::Compress
cpan/IO-Compress/t/105oneshot-rawdeflate.t  IO::Compress
cpan/IO-Compress/t/105oneshot-zip.t IO::Compress
cpan/IO-Compress/t/105oneshot-zip-bzip2-only.t  IO::Compress
cpan/IO-Compress/t/105oneshot-zip-only.tIO::Compress
cpan/IO-Compress/t/105oneshot-zip-store-only.t  IO::Compress
Failures: (common-args) none
[default] -Duselargefiles
[default] -DDEBUGGING -Duselargefiles
../t/porting/manifest.t.FAILED
10398, 10400-10401
../t/porting/pod_rules.tFAILED
4

[default] -Duseithreads -Duselargefiles
../t/op/taint.t.FAILED
1, 397
../t/porting/manifest.t.FAILED
10398, 10400-10401
../t/porting/pod_rules.tFAILED
4

[default] -DDEBUGGING -Duseithreads -Duselargefiles
../t/op/taint.t.FAILED
1, 397
../t/porting/manifest.t.FAILED
10398, 10400-10401
../t/porting/pod_rules.tFAILED
4
../cpan/File-Path/t/Path.t..FAILED
9
Non-zero exit status: 1

Passed Todo tests: (common-args) none
[default] -Duselargefiles
[default] -DDEBUGGING -Duselargefiles
[default] -Duseithreads -Duselargefiles
[default] -DDEBUGGING -Duseithreads -Duselargefiles
../ext/IPC-Open3/t/IPC-Open3.t..PASSED
25

Compiler messages(gcc):
win32.c: In function 'win32_fseek':
win32.c:2872:24: warning: passing argument 2 of 'fsetpos' from incompatible 
pointer type
C:/Strawberry/c/x86_64-w64-mingw32/include/stdio.h:456:15: note: expected 
'const fpos_t *' but argument is of type 'long int *'
RealPPPort.xs: In function 'XS_Devel__PPPort_ptrtests':
..\..\lib\CORE/perl.h:1731:26: warning: cast from pointer to integer of 
different size [-Wpointer-to-int-cast]
..\..\lib\CORE/perl.h:1746:21: note: in expansion of macro 'INT2PTR'
RealPPPort.xs:1598:27: note: in expansion of macro 'PTR2ul'
POSIX.c: In function 'XS_POSIX__Termios_getattr':
POSIX.c:2187:17: warning: cast from pointer to integer of different size 
[-Wpointer-to-int-cast]
POSIX.c: In function 'XS_POSIX__Termios_setattr':
POSIX.c:2243:17: warning: cast from pointer to integer of different size 
[-Wpointer-to-int-cast]
POSIX.c: In function 'XS_POSIX__Termios_getispeed':
POSIX.c:2310:17: warning: cast from pointer to integer of different size 
[-Wpointer-to-int-cast]
POSIX.c: In function 'XS_POSIX__Termios_getiflag':
POSIX.c:2341:17: warning: cast from pointer to integer of different size 
[-Wpointer-to-int-cast]
POSIX.c: In function 'XS_POSIX__Termios_getcc':
POSIX.c:2393:17: warning: cast from pointer to integer of different size 
[-Wpointer-to-int-cast]
POSIX.c: In function 'XS_POSIX__Termios_setispeed':
POSIX.c:2432:17: warning: cast from pointer to integer of different size 
[-Wpointer-to-int-cast]
POSIX.c: In function 'XS_POSIX__Termios_setiflag':
POSIX.c:2474:17: warning: cast from pointer to integer of different size 
[-Wpointer-to-int-cast]
POSIX.c: In function 'XS_POSIX__Termios_setcc':
POSIX.c:2522:17: warning: cast from pointer to integer of different size 
[-Wpointer-to-int-cast]
POSIX.xs: In function 'XS_POSIX_ctermid':
POSIX.xs:1454:20: warning: cast to pointer from integer of different size 
[-Wint-to-pointer-cast]
POSIX.xs:3595:11: note: in expansion of macro 'ctermid'
POSIX.c: In function 'XS_POSIX_ttyname':
POSIX.xs:1373:22: warning: cast to pointer from integer of different size 
[-Wint-to-poin

Smoke [blead] v5.27.2-119-g205ccfbcf5 PASS linux 4.5.0-1-default [openSUSE Tumbleweed (x86_64/4 cpu[16 cores])

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
sv05: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (GenuineIntel 1998MHz) 
(x86_64/4 cpu[16 cores])
onlinux - 4.5.0-1-default [openSUSE Tumbleweed (20160326)]
using ccache cc version 5.3.1 20151207 [gcc-5-branch revision 231355]
smoketime 2 hours 9 minutes (average 16 minutes 13 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
O O O O O O -Duselongdouble
O O O O O O -Duse64bitall
O O O O O O -Duseithreads -Duselongdouble
O O O O O O -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = en_US.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = en_US.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Passed Todo tests: (common-args) none
[en_US.utf8] -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duselongdouble
[en_US.utf8] -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duse64bitall
[en_US.utf8] -Duseithreads -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duseithreads -Duselongdouble
[en_US.utf8] -Duseithreads -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2

Compiler messages(gcc):


Non-Fatal messages(gcc):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.70 running on perl 5.22.1
(Reporter v0.053 / Smoker v0.046)


Smoke [5.24.2] v5.24.2-25-ga8b4e7c FAIL(F) darwin 15.6.0 (Intel Core 2 Duo/)

2017-08-08 Thread tony
Automated smoke report for 5.24.2 patch 
a8b4e7c58df43e20b74f9ff64135f39648707f8e v5.24.2-25-ga8b4e7c
neptune.local: iMac (2.4 GHz) (Intel Core 2 Duo/)
ondarwin - 15.6.0 (Mac OS X)
using cc version 4.2.1 Compatible Apple LLVM 8.0.0 (clang-800.0.42.1)
smoketime 8 hours 12 minutes (average 30 minutes 48 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.24.2-25-ga8b4e7c  Configuration (common) none
--- -
F O F O 
F O F O -Duse64bitint
F O F O -Dusedtrace
F O F O -Dusemorebits
F O F F -Duseithreads
F O F F -Duseithreads -Duse64bitint
F O F F -Duseithreads -Dusedtrace
F O F F -Duseithreads -Dusemorebits
| | | +- PERLIO = perlio -DDEBUGGING
| | +--- PERLIO = stdio  -DDEBUGGING
| +- PERLIO = perlio
+--- PERLIO = stdio


Locally applied patches:
uncommitted-changes
SMOKEa8b4e7c58df43e20b74f9ff64135f39648707f8e

Testsuite was run only with 'harness' and HARNESS_OPTIONS=j3

Failures: (common-args) none
[stdio] 
[stdio] -DDEBUGGING
[stdio] -Duse64bitint
[stdio] -DDEBUGGING -Duse64bitint
[stdio] -Dusedtrace
[stdio] -DDEBUGGING -Dusedtrace
[stdio] -Dusemorebits
[stdio] -DDEBUGGING -Dusemorebits
[stdio] -Duseithreads
[stdio] -Duseithreads -Duse64bitint
[stdio] -Duseithreads -Dusedtrace
[stdio] -Duseithreads -Dusemorebits
../t/io/socket.tFAILED
14

[stdio] -DDEBUGGING -Duseithreads
../t/io/socket.tFAILED
14
../dist/threads-shared/t/object2.t..??
../dist/threads/t/free2.t...FAILED
Bad plan.  You planned 78 tests but ran 75.

[perlio] -DDEBUGGING -Duseithreads
[perlio] -DDEBUGGING -Duseithreads -Duse64bitint
[perlio] -DDEBUGGING -Duseithreads -Dusedtrace
[perlio] -DDEBUGGING -Duseithreads -Dusemorebits
../dist/threads-shared/t/object2.t..??

[stdio] -DDEBUGGING -Duseithreads -Duse64bitint
[stdio] -DDEBUGGING -Duseithreads -Dusedtrace
[stdio] -DDEBUGGING -Duseithreads -Dusemorebits
../t/io/socket.tFAILED
14
../dist/threads-shared/t/object2.t..??

Compiler messages(gcc):
perlio.c:849:5: warning: unused variable 'items' [-Wunused-variable]
perlio.c:1300:37: warning: unused parameter 'iotype' [-Wunused-parameter]
perlio.c:1300:49: warning: unused parameter 'mode' [-Wunused-parameter]
inflate.c:1487:9: warning: unused parameter 'subvert' [-Wunused-parameter]
inflate.c:1507:61: warning: shifting a negative signed value is undefined 
[-Wshift-negative-value]
ListUtil.xs:808:17: warning: unused variable 'a' [-Wunused-variable]
ListUtil.xs:809:17: warning: unused variable 'b' [-Wunused-variable]
ListUtil.xs:850:17: warning: unused variable 'a' [-Wunused-variable]
ListUtil.xs:851:17: warning: unused variable 'b' [-Wunused-variable]
POSIX.xs:3265:15: warning: 'tmpnam' is deprecated: This function is provided 
for compatibility reasons only.  Due to security concerns inherent in the 
design of tmpnam(3), it is highly recommended that you use mkstemp(3) instead. 
[-Wdeprecated-declarations]

-- 
Report by Test::Smoke v1.43 build 1271 running on perl 5.18.2
(Reporter v0.035 / Smoker v0.045)

Logs at http://perl.develop-help.com/reports/
Branch: origin/maint-5.24
Configuration: default


Smoke [blead] v5.27.2-122-g367917954d PASS linux 4.4.74-18.20-default [openSUSE Leap 42.2] (x86_64/8 cpu[32 cores])

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
367917954ddd5b3c7085e1a814b02065191c7c38 v5.27.2-122-g367917954d
tux: Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz (GenuineIntel 1699MHz) (x86_64/8 
cpu[32 cores])
onlinux - 4.4.74-18.20-default [openSUSE Leap 42.2]
using ccache cc version 4.8.5
smoketime 1 hour 16 minutes (average 9 minutes 32 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-122-g367917954d  Configuration (common) none
--- -
O O O O O O -Duselongdouble
O O O O O O -Duse64bitall
O O O O O O -Duseithreads -Duselongdouble
O O O O O O -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = en_US.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = en_US.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE367917954ddd5b3c7085e1a814b02065191c7c38

Testsuite was run only with 'harness'

Passed Todo tests: (common-args) none
[en_US.utf8] -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duselongdouble
[en_US.utf8] -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duse64bitall
[en_US.utf8] -Duseithreads -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duseithreads -Duselongdouble
[en_US.utf8] -Duseithreads -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2

Compiler messages(gcc):
op.c: In function ‘Perl_rpeep’:
op.c:14237:83: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
pp_hot.c: In function ‘Perl_pp_padrange’:
pp_hot.c:383:71: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp.c: In function ‘Perl_pp_length’:
pp.c:3131:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
pp_sys.c: In function ‘Perl_tied_method’:
pp_sys.c:541:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp_sys.c:542:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp_sys.c:543:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
sv.c: In function ‘Perl_sv_upgrade’:
sv.c:1291:64: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:1292:64: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_sv_setsv_flags’:
sv.c:4281:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:4282:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:4367:65: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newSViv’:
sv.c:9629:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newSVuv’:
sv.c:9668:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newRV_noinc’:
sv.c:9723:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
regcomp.c: In function ‘S_handle_possible_posix’:
regcomp.c:14181:62: warning: defining type in ‘sizeof’ expression is 
invalid in C++ [-Wc++-compat]
toke.c: In function ‘Perl_lex_start’:
toke.c:772:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
op.c: In function ‘Perl_ck_rvconst’:
op.c:10097:68: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]

Non-Fatal messages(gcc):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.70_05 running on perl 5.26.0
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 PASS linux 3.10.0-514.21.1.el7.x86_64 [CentOS Linux 7.3.1611 (x86_64/1 cpu[12 cores])

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
lx02: Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz (GenuineIntel 2310MHz) (x86_64/1 
cpu[12 cores])
onlinux - 3.10.0-514.21.1.el7.x86_64 [CentOS Linux 7.3.1611 (Core)]
using ccache cc version 4.8.5 20150623 (Red Hat 4.8.5-11)
smoketime 2 hours 36 minutes (average 19 minutes 33 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
O O O O O O 
O O O O O O -Duse64bitall -Duselongdouble
O O O O O O -Duseithreads
O O O O O O -Duseithreads -Duse64bitall -Duselongdouble
| | | | | +- LC_ALL = en_US.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = en_US.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

MANIFEST did not declare 'Conf'
MANIFEST did not declare 'Conf-gcc'
MANIFEST did not declare 'MANIFEST.new'
MANIFEST did not declare 'Rsync'
MANIFEST did not declare 'merijn/Configure'
MANIFEST did not declare 'merijn/Glossary'
MANIFEST did not declare 'merijn/config.sh'
MANIFEST did not declare 'merijn/config_h.SH'
MANIFEST did not declare 'mkovz.pl'
MANIFEST did not declare 'mktest'
MANIFEST did not declare 'mktest1'
MANIFEST did not declare 'rm.sh'
MANIFEST did not declare 'smoke.env'
MANIFEST did not declare 'smoke.sh'

Passed Todo tests: (common-args) none
[en_US.utf8] 
[en_US.utf8] -DDEBUGGING
[en_US.utf8] -Duse64bitall -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duse64bitall -Duselongdouble
[en_US.utf8] -Duseithreads
[en_US.utf8] -DDEBUGGING -Duseithreads
[en_US.utf8] -Duseithreads -Duse64bitall -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duseithreads -Duse64bitall -Duselongdouble
../lib/B/Deparse.t..PASSED
2

Compiler messages(gcc):


Non-Fatal messages(gcc):



-- 
Report by Test::Smoke v1.71_01 running on perl 5.26.0
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 PASS linux 4.5.0-1-default [openSUSE Tumbleweed (x86_64/4 cpu[16 cores])

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
sv05: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (GenuineIntel 2833MHz) 
(x86_64/4 cpu[16 cores])
onlinux - 4.5.0-1-default [openSUSE Tumbleweed (20160326)]
using ccache cc version 5.3.1 20151207 [gcc-5-branch revision 231355]
smoketime 2 hours 10 minutes (average 16 minutes 19 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
O O O O O O -Duselongdouble
O O O O O O -Duse64bitall
O O O O O O -Duseithreads -Duselongdouble
O O O O O O -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = en_US.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = en_US.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Passed Todo tests: (common-args) none
[en_US.utf8] -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duselongdouble
[en_US.utf8] -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duse64bitall
[en_US.utf8] -Duseithreads -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duseithreads -Duselongdouble
[en_US.utf8] -Duseithreads -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2

Compiler messages(gcc):


Non-Fatal messages(gcc):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.70 running on perl 5.22.1
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 PASS linux 4.4.74-18.20-default [openSUSE Leap 42.2] (x86_64/12 cpu[72 cores])

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
pc09: Intel(R) Xeon(R) CPU E5-1650 0 @ 3.20GHz (GenuineIntel 3559MHz) 
(x86_64/12 cpu[72 cores])
onlinux - 4.4.74-18.20-default [openSUSE Leap 42.2]
using ccache cc version 4.8.5
smoketime 1 hour 4 minutes (average 8 minutes 6 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
O O O O O O -Duselongdouble
O O O O O O -Duse64bitall
O O O O O O -Duseithreads -Duselongdouble
O O O O O O -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = en_US.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = en_US.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Passed Todo tests: (common-args) none
[en_US.utf8] -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duselongdouble
[en_US.utf8] -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duse64bitall
[en_US.utf8] -Duseithreads -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duseithreads -Duselongdouble
[en_US.utf8] -Duseithreads -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2

Compiler messages(gcc):
pp_hot.c: In function ‘Perl_pp_padrange’:
pp_hot.c:383:71: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp_sys.c: In function ‘Perl_tied_method’:
pp_sys.c:541:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp_sys.c:542:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp_sys.c:543:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
op.c: In function ‘Perl_rpeep’:
op.c:14195:83: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
pp.c: In function ‘Perl_pp_length’:
pp.c:3131:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_sv_upgrade’:
sv.c:1291:64: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:1292:64: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_sv_setsv_flags’:
sv.c:4281:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:4282:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:4367:65: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newSViv’:
sv.c:9629:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newSVuv’:
sv.c:9668:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newRV_noinc’:
sv.c:9723:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
regcomp.c: In function ‘S_handle_possible_posix’:
regcomp.c:14181:62: warning: defining type in ‘sizeof’ expression is 
invalid in C++ [-Wc++-compat]
toke.c: In function ‘Perl_lex_start’:
toke.c:772:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
op.c: In function ‘Perl_ck_rvconst’:
op.c:10097:68: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]

Non-Fatal messages(gcc):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.70_02 running on perl 5.24.1
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-122-g367917954d PASS linux 4.4.74-18.20-default [openSUSE Leap 42.2] (x86_64/8 cpu[32 cores])

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
367917954ddd5b3c7085e1a814b02065191c7c38 v5.27.2-122-g367917954d
tux: Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz (GenuineIntel 2529MHz) (x86_64/8 
cpu[32 cores])
onlinux - 4.4.74-18.20-default [openSUSE Leap 42.2]
using ccache cc version 4.8.5
smoketime 1 hour 16 minutes (average 9 minutes 34 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-122-g367917954d  Configuration (common) none
--- -
O O O O O O -Duselongdouble
O O O O O O -Duse64bitall
O O O O O O -Duseithreads -Duselongdouble
O O O O O O -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = en_US.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = en_US.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE367917954ddd5b3c7085e1a814b02065191c7c38

Testsuite was run only with 'harness'

Passed Todo tests: (common-args) none
[en_US.utf8] -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duselongdouble
[en_US.utf8] -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duse64bitall
[en_US.utf8] -Duseithreads -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duseithreads -Duselongdouble
[en_US.utf8] -Duseithreads -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2

Compiler messages(gcc):
op.c: In function ‘Perl_rpeep’:
op.c:14237:83: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
pp_hot.c: In function ‘Perl_pp_padrange’:
pp_hot.c:383:71: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp.c: In function ‘Perl_pp_length’:
pp.c:3131:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_sv_upgrade’:
sv.c:1291:64: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:1292:64: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_sv_setsv_flags’:
sv.c:4281:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:4282:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:4367:65: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newSViv’:
sv.c:9629:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newSVuv’:
sv.c:9668:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newRV_noinc’:
sv.c:9723:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
pp_sys.c: In function ‘Perl_tied_method’:
pp_sys.c:541:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp_sys.c:542:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp_sys.c:543:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
regcomp.c: In function ‘S_handle_possible_posix’:
regcomp.c:14181:62: warning: defining type in ‘sizeof’ expression is 
invalid in C++ [-Wc++-compat]
toke.c: In function ‘Perl_lex_start’:
toke.c:772:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
op.c: In function ‘Perl_ck_rvconst’:
op.c:10097:68: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]

Non-Fatal messages(gcc):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.70_05 running on perl 5.26.0
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 PASS linux 4.4.74-18.20-default [openSUSE Leap 42.2] (x86_64/12 cpu[72 cores])

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
pc09: Intel(R) Xeon(R) CPU E5-1650 0 @ 3.20GHz (GenuineIntel 3612MHz) 
(x86_64/12 cpu[72 cores])
onlinux - 4.4.74-18.20-default [openSUSE Leap 42.2]
using ccache cc version 4.8.5
smoketime 1 hour 4 minutes (average 8 minutes 6 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
O O O O O O -Duselongdouble
O O O O O O -Duse64bitall
O O O O O O -Duseithreads -Duselongdouble
O O O O O O -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = en_US.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = en_US.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Passed Todo tests: (common-args) none
[en_US.utf8] -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duselongdouble
[en_US.utf8] -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duse64bitall
[en_US.utf8] -Duseithreads -Duselongdouble
[en_US.utf8] -DDEBUGGING -Duseithreads -Duselongdouble
[en_US.utf8] -Duseithreads -Duse64bitall
[en_US.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2

Compiler messages(gcc):
pp_hot.c: In function ‘Perl_pp_padrange’:
pp_hot.c:383:71: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp_sys.c: In function ‘Perl_tied_method’:
pp_sys.c:541:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp_sys.c:542:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
pp_sys.c:543:67: warning: defining type in ‘sizeof’ expression is invalid 
in C++ [-Wc++-compat]
op.c: In function ‘Perl_rpeep’:
op.c:14195:83: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
pp.c: In function ‘Perl_pp_length’:
pp.c:3131:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_sv_upgrade’:
sv.c:1291:64: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:1292:64: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_sv_setsv_flags’:
sv.c:4281:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:4282:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c:4367:65: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newSViv’:
sv.c:9629:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newSVuv’:
sv.c:9668:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
sv.c: In function ‘Perl_newRV_noinc’:
sv.c:9723:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
regcomp.c: In function ‘S_handle_possible_posix’:
regcomp.c:14181:62: warning: defining type in ‘sizeof’ expression is 
invalid in C++ [-Wc++-compat]
toke.c: In function ‘Perl_lex_start’:
toke.c:772:67: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]
op.c: In function ‘Perl_ck_rvconst’:
op.c:10097:68: warning: defining type in ‘sizeof’ expression is invalid in 
C++ [-Wc++-compat]

Non-Fatal messages(gcc):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.70_02 running on perl 5.24.1
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-109-g13f60a0985 PASS HP-UX B.11.23/64 (ia64/2 cpu)

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
13f60a098562e1ce7ab09819568bb8a03b617a60 v5.27.2-109-g13f60a0985
x1: Intel(R) Itanium 2 processor/1600 MHz (ia64/2 cpu)
onHP-UX - B.11.23/64
using ccache cc version B3910B A.06.25.02
smoketime 12 hours 7 minutes (average 1 hour 30 minutes)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-109-g13f60a0985  Configuration (common) none
--- -
O O O O O O 
O O O O O O -Duse64bitall
O O O O O O -Duseithreads
O O O O O O -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = univ.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = univ.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE13f60a098562e1ce7ab09819568bb8a03b617a60

Testsuite was run only with 'harness'

Tests skipped on user request:
lib/Test/Simple/t/utf8.t
Passed Todo tests: (common-args) none
[stdio/perlio] 
[stdio/perlio] -DDEBUGGING
[stdio/perlio] -Duse64bitall
[stdio/perlio] -DDEBUGGING -Duse64bitall
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitall
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitall
../dist/Net-Ping/t/450_service.tPASSED
9, 18

[univ.utf8] 
[univ.utf8] -DDEBUGGING
[univ.utf8] -Duse64bitall
[univ.utf8] -DDEBUGGING -Duse64bitall
[univ.utf8] -Duseithreads
[univ.utf8] -DDEBUGGING -Duseithreads
[univ.utf8] -Duseithreads -Duse64bitall
[univ.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2
../dist/Net-Ping/t/450_service.tPASSED
9, 18

Compiler messages(hpux):


Non-Fatal messages(hpux):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.70_01 running on perl 5.14.2
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 PASS openbsd 6.1 (amd64/2 cpu)

2017-08-08 Thread Carlos Guevara
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
cjg-openbsd6.localdomain: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (2667 MHz) 
(amd64/2 cpu)
onopenbsd - 6.1
using cc version 4.2.1 20070719
smoketime 4 hours 50 minutes (average 36 minutes 22 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
O O 
O O -Duse64bitall
O O -Duseithreads
O O -Duseithreads -Duse64bitall
| +- -DDEBUGGING
+--- no debugging


Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Tests skipped on user request:
# One test name on a line
Compiler messages(gcc):
/home/core/tmp/cc5hGuMw.o: In function `main':
/home/core/tmp/ccLZoclo.o: In function `main':
/home/core/tmp/cceYPRKJ.o: In function `xxx':
/home/core/tmp/ccUYSQnU.o: In function `main':
op.c: In function 'Perl_report_redefined_cv':
op.c:15384: warning: passing argument 1 of 'S_CvGV' discards qualifiers from 
pointer target type
op.c: In function 'S_gen_constant_list':
op.c:4621: warning: argument 'o' might be clobbered by 'longjmp' or 'vfork'
gv.c: In function 'S_gv_stashpvn_internal':
gv.c:1446: warning: comparison is always false due to limited range of data type
gv.c:1447: warning: comparison is always false due to limited range of data type
proto.h:5716: warning: 'S_parse_ident' declared inline after being called
proto.h:5716: warning: previous declaration of 'S_parse_ident' was here
toke.c: In function 'S_scan_pat':
toke.c:9589: warning: comparison is always false due to limited range of data 
type
toke.c: In function 'Perl_yylex':
toke.c:2879: warning: 'offset_to_max' may be used uninitialized in this function
toke.c:2879: note: 'offset_to_max' was declared here
regcomp.c: In function 'S_make_trie':
regcomp.c:2902: warning: comparison is always false due to limited range of 
data type
regcomp.c: In function 'S_construct_ahocorasick_from_trie':
regcomp.c:3620: warning: comparison is always false due to limited range of 
data type
regcomp.c:3621: warning: comparison is always false due to limited range of 
data type
regcomp.c: In function 'S_join_exact':
regcomp.c:3878: warning: comparison is always false due to limited range of 
data type
regcomp.c: In function 'S_study_chunk':
regcomp.c:4825: warning: comparison is always false due to limited range of 
data type
regcomp.c:4827: warning: comparison is always false due to limited range of 
data type
regcomp.c: In function 'S_add_data':
regcomp.c:6056: warning: comparison is always false due to limited range of 
data type
regcomp.c:6058: warning: comparison is always false due to limited range of 
data type
regcomp.c:6060: warning: comparison is always false due to limited range of 
data type
regcomp.c: In function 'Perl_re_op_compile':
regcomp.c:7358: warning: comparison is always false due to limited range of 
data type
regcomp.c:7386: warning: comparison is always false due to limited range of 
data type
regcomp.c:7757: warning: comparison is always false due to limited range of 
data type
regcomp.c: In function 'Perl_reg_temp_copy':
regcomp.c:19631: warning: comparison is always false due to limited range of 
data type
dump.c: In function 'Perl_do_sv_dump':
dump.c:2220: warning: passing argument 1 of 'S_CvGV' discards qualifiers from 
pointer target type
sv.c: In function 'Perl_sv_upgrade':
sv.c:1346: warning: comparison is always false due to limited range of data type
sv.c:1416: warning: comparison is always false due to limited range of data type
pp.c: In function 'Perl_pp_argelem':
pp.c:6762: warning: value computed is not used
pp_ctl.c: In function 'Perl_rxres_save':
pp_ctl.c:374: warning: comparison is always false due to limited range of data 
type
pp_ctl.c:376: warning: comparison is always false due to limited range of data 
type
pp_sys.c: In function 'Perl_tied_method':
pp_sys.c:564: warning: comparison is always false due to limited range of data 
type
regexec.c: In function 'Perl_regexec_flags':
regexec.c:3145: warning: comparison is always false due to limited range of 
data type
regexec.c:3156: warning: comparison is always false due to limited range of 
data type
regexec.c: In function 'S_setup_EXACTISH_ST_c1_c2':
regexec.c:4096: warning: comparison is always false due to limited range of 
data type
regexec.c:4097: warning: comparison is always false due to limited range of 
data type
utf8.c: In function 'Perl_swash_fetch':
utf8.c:4207: warning: comparison is always false due to limited range of data 
type
universal.c: In function 'Perl_croa

Smoke [blead] v5.27.2-119-g205ccfbcf5 PASS freebsd 12.0-CURRENT (amd64/2 cpu)

2017-08-08 Thread Carlos Guevara
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
cjg-freebsd12: Intel(R) Xeon(R) CPU   X5650  @ 2.67GHz (amd64/2 cpu)
onfreebsd - 12.0-CURRENT
using cc version 4.2.1 Compatible FreeBSD Clang 5.0.0 (trunk 308421)
smoketime 4 hours 30 minutes (average 33 minutes 52 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
O O 
O O -Duse64bitall
O O -Duseithreads
O O -Duseithreads -Duse64bitall
| +- -DDEBUGGING
+--- no debugging


Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Tests skipped on user request:
# One test name on a line
Compiler messages(gcc):


Non-Fatal messages(gcc):



-- 
Report by Test::Smoke v1.71 running on perl 5.26.0
(Reporter v0.053 / Smoker v0.046)


Smoke [5.27.3] v5.27.2-110-g9c6b56d FAIL(F) Solaris 2.11 (i386/1 cpu)

2017-08-08 Thread tony
Automated smoke report for 5.27.3 patch 
9c6b56dc65cdd9256fbe04a7baf4f085db1c04dd v5.27.2-110-g9c6b56d
nereid: i86pc (3015MHz) (i386/1 cpu)
onSolaris - 2.11
using /opt/solarisstudio12.3/bin/cc version Sun C 5.12 SunOS_i386 
2011/11/16
smoketime 12 hours 51 minutes (average 48 minutes 13 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-110-g9c6b56d  Configuration (common) -Dmake=gmake
--- -
O O O O 
O O O O -Dusedtrace -Duseshrplib
O O O O -Dusemorebits
O O O O -Duse64bitall
F O O F -Duseithreads
F O O O -Duseithreads -Dusedtrace -Duseshrplib
O O O F -Duseithreads -Dusemorebits
O F F O -Duseithreads -Duse64bitall
| | | +- PERLIO = perlio -DDEBUGGING
| | +--- PERLIO = stdio  -DDEBUGGING
| +- PERLIO = perlio
+--- PERLIO = stdio


Locally applied patches:
SMOKE9c6b56dc65cdd9256fbe04a7baf4f085db1c04dd

Testsuite was run only with 'harness' and HARNESS_OPTIONS=j3

Failures: (common-args) -Dmake=gmake
[stdio] -Duseithreads
[stdio] -Duseithreads -Dusedtrace -Duseshrplib
../dist/Time-HiRes/t/usleep.t...FAILED
3
Non-zero exit status: 1

[perlio] -DDEBUGGING -Duseithreads
[perlio] -DDEBUGGING -Duseithreads -Dusemorebits
../dist/threads-shared/t/waithires.tFAILED
Non-zero exit status: 1
Bad plan.  You planned 63 tests but ran 49.

[perlio] -Duseithreads -Duse64bitall
../cpan/Memoize/t/expmod_t.tFAILED
14-15

[stdio] -DDEBUGGING -Duseithreads -Duse64bitall
../dist/threads-shared/t/waithires.tFAILED
Non-zero exit status: 1
Bad plan.  You planned 63 tests but ran 6.

Compiler messages(solaris):
"try.c", line 17: warning: statement not reached
"try.c", line 66: warning: statement not reached
"zaphod32_hash.h", line 241: warning: statement not reached
"pp_sys.c", line 4533: warning: statement not reached
"../../zaphod32_hash.h", line 241: warning: statement not reached
"bzlib.c", line 868: warning: statement not reached
"Cwd.xs", line 20: warning: macro redefined: SYSNAME
"../../../zaphod32_hash.h", line 241: warning: statement not reached
"POSIX.c", line 4022: warning: statement not reached
"POSIX.c", line 4382: warning: statement not reached
"Piece.c", line 1202: warning: statement not reached
"Piece.c", line 1261: warning: statement not reached
"Piece.c", line 1306: warning: statement not reached
"Piece.c", line 1347: warning: statement not reached
"../../../../zaphod32_hash.h", line 241: warning: statement not reached
"/export/home/perlsmok/smoke-me/perl-current/zaphod32_hash.h", line 241: 
warning: statement not reached
"../zaphod32_hash.h", line 241: warning: statement not reached
"B.c", line 1146: warning: statement not reached
"APItest.c", line 6125: warning: statement not reached
UUID: E9EDFB64-7BFE-11E7-BCC4-94DA7A7A5119
Branch: blead
Config: default
Logs: http://perl.develop-help.com/reports/

-- 
Report by Test::Smoke v1.53 build  running on perl 5.16.1
(Reporter v0.050 / Smoker v0.045)


Smoke [blead] v5.27.2-104-g3b890f763b FAIL(F) HP-UX B.11.11/64 (PA-RISC2.0/64/1 cpu)

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
3b890f763b669e3019e714e174a3d3dfc5075f55 v5.27.2-104-g3b890f763b
r9: PA8900 (PA-RISC2.0/64/1 cpu)
onHP-UX - B.11.11/64
using cc version B.11.11.18
smoketime 1 day 11 hours 22 minutes (average 4 hours 25 minutes)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-104-g3b890f763b  Configuration (common) none
--- -
O O F F F F 
F F F F F F -Duse64bitall
O O O F F F -Duseithreads
F F F F F F -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = univ.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = univ.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE3b890f763b669e3019e714e174a3d3dfc5075f55

Testsuite was run only with 'harness'

Failures: (common-args) none
[univ.utf8] 
../dist/Time-HiRes/t/alarm.tFAILED
8-9
Non-zero exit status: 2

[stdio/perlio/univ.utf8] -DDEBUGGING
[stdio/perlio/univ.utf8] -DDEBUGGING -Duseithreads
../lib/locale.t.FAILED
No plan found in TAP output

[stdio/perlio/univ.utf8] -Duse64bitall
[stdio/perlio/univ.utf8] -Duseithreads -Duse64bitall
../lib/warnings.t...FAILED
364

[stdio] -DDEBUGGING -Duse64bitall
[stdio] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/locale.t.FAILED
No plan found in TAP output
../lib/warnings.t...FAILED
364

[perlio/univ.utf8] -DDEBUGGING -Duse64bitall
[perlio/univ.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/warnings.t...FAILED
364
../lib/locale.t.FAILED
No plan found in TAP output

Passed Todo tests: (common-args) none
[stdio/perlio] 
[stdio/perlio] -DDEBUGGING
[stdio/perlio] -Duse64bitall
[stdio/perlio] -DDEBUGGING -Duse64bitall
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitall
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitall
../dist/Net-Ping/t/450_service.tPASSED
9, 18

[univ.utf8] 
[univ.utf8] -DDEBUGGING
[univ.utf8] -Duse64bitall
[univ.utf8] -DDEBUGGING -Duse64bitall
[univ.utf8] -Duseithreads
[univ.utf8] -DDEBUGGING -Duseithreads
[univ.utf8] -Duseithreads -Duse64bitall
[univ.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2
../dist/Net-Ping/t/450_service.tPASSED
9, 18

Compiler messages(hpux):


Non-Fatal messages(hpux):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.71_01 running on perl 5.14.2
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 FAIL(F) netbsd 7.1 (amd64/2 cpu)

2017-08-08 Thread Carlos Guevara
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
cjg-netbsd7.localdomain: Intel 686-class (amd64/2 cpu)
onnetbsd - 7.1
using cc version 4.8.5
smoketime 3 hours 45 minutes (average 28 minutes 14 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
F O 
O O -Duse64bitall
O O -Duseithreads
O O -Duseithreads -Duse64bitall
| +- -DDEBUGGING
+--- no debugging


Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Tests skipped on user request:
# One test name on a line
Failures: (common-args) none
[default] 
../t/op/stat.t..FAILED
45-46, 48

Compiler messages(gcc):
toke.c: In function 'Perl_yylex':
toke.c:3015:24: warning: 'offset_to_max' may be used uninitialized in this 
function [-Wmaybe-uninitialized]
toke.c:2879:12: note: 'offset_to_max' was declared here
/usr/include/sys/cdefs_elf.h:67:20: error: missing binary operator before token 
"("
/usr/include/sys/cdefs_elf.h:73:20: error: missing binary operator before token 
"("
/usr/include/sys/cdefs_elf.h:79:20: error: missing binary operator before token 
"("
Socket.c: In function 'XS_Socket_pack_ip_mreq_source':
Socket.c:1558:7: warning: variable 'interface' set but not used 
[-Wunused-but-set-variable]
Piece.xs: In function '_strptime':
Piece.xs:719:8: warning: 'len' may be used uninitialized in this function 
[-Wmaybe-uninitialized]

Non-Fatal messages(gcc):



-- 
Report by Test::Smoke v1.71 running on perl 5.26.0
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 FAIL(F) freebsd 10.3-RELEASE-p20 (amd64/2 cpu)

2017-08-08 Thread Carlos Guevara
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
cjg-freebsd10: Intel(R) Xeon(R) CPU   X5650  @ 2.67GHz (amd64/2 cpu)
onfreebsd - 10.3-RELEASE-p20
using cc version 4.2.1 Compatible FreeBSD Clang 3.4.1 
(tags/RELEASE_34/dot1-final 208032)
smoketime 3 hours 30 minutes (average 26 minutes 21 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
F O 
O O -Duse64bitall
O O -Duseithreads
O O -Duseithreads -Duse64bitall
| +- -DDEBUGGING
+--- no debugging


Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Tests skipped on user request:
# One test name on a line
Failures: (common-args) none
[default] 
../t/op/stat.t..FAILED
45-46, 48
../cpan/IPC-Cmd/t/01_IPC-Cmd.t..FAILED
21-22, 27-28, 30-33, 38-39, 41-44, 49-50
52-55, 60-61, 63-66, 71-72, 74-77, 82-83
85-88, 93-94, 96-99, 104-105, 107-110, 115-116
118-121, 126-127, 129-132, 137-138, 140-143
148-149, 151-154, 159-160, 162-165, 170-171
173-176, 181-182, 184-187, 192-193, 195-198
203-204, 206-209, 214-215, 217-220, 225-226
228-231, 236-237
Non-zero exit status: 118

Compiler messages(gcc):


Non-Fatal messages(gcc):



-- 
Report by Test::Smoke v1.71 running on perl 5.26.0
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 FAIL(F) freebsd 11.1-RELEASE (amd64/2 cpu)

2017-08-08 Thread Carlos Guevara
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
cjg-freebsd11: Intel(R) Xeon(R) CPU   X5650  @ 2.67GHz (amd64/2 cpu)
onfreebsd - 11.1-RELEASE
using cc version 4.2.1 Compatible FreeBSD Clang 4.0.0 
(tags/RELEASE_400/final 297347)
smoketime 3 hours 28 minutes (average 26 minutes 3 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
F O 
O O -Duse64bitall
O O -Duseithreads
O O -Duseithreads -Duse64bitall
| +- -DDEBUGGING
+--- no debugging


Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Tests skipped on user request:
# One test name on a line
Failures: (common-args) none
[default] 
../cpan/IPC-Cmd/t/01_IPC-Cmd.t..FAILED
21-22, 27-28, 30-33, 38-39, 41-44, 49-50
52-55, 60-61, 63-66, 71-72, 74-77, 82-83
85-88, 93-94, 96-99, 104-105, 107-110, 115-116
118-121, 126-127, 129-132, 137-138, 140-143
148-149, 151-154, 159-160, 162-165, 170-171
173-176, 181-182, 184-187, 192-193, 195-198
203-204, 206-209, 214-215, 217-220, 225-226
228-231, 236-237
Non-zero exit status: 118

Compiler messages(gcc):


Non-Fatal messages(gcc):



-- 
Report by Test::Smoke v1.71 running on perl 5.26.0
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 FAIL(F) linux 4.11.11-300.fc26.x86_64 [Fedora 26 (x86_64/1 cpu[2 cores])

2017-08-08 Thread Carlos Guevara
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
cjg-fedora26: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (GenuineIntel 2667MHz) 
(x86_64/1 cpu[2 cores])
onlinux - 4.11.11-300.fc26.x86_64 [Fedora 26 (Server Edition)]
using cc version 7.1.1 20170622 (Red Hat 7.1.1-3)
smoketime 3 hours 15 minutes (average 24 minutes 24 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
F O 
O O -Duse64bitall
O O -Duseithreads
O O -Duseithreads -Duse64bitall
| +- -DDEBUGGING
+--- no debugging


Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Tests skipped on user request:
# One test name on a line
Failures: (common-args) none
[default] 
../t/op/stat.t..FAILED
45-46, 48

Compiler messages(gcc):
op.c: In function 'Perl_op_clear':
op.c:1081:29: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:1082:17: note: here
op.c:1087:29: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:1088:17: note: here
op.c:1097:29: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:1098:17: note: here
op.c:1107:29: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:1108:17: note: here
op.c:1114:29: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:1115:17: note: here
op.c:957:28: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:959:5: note: here
sbox32_hash.h: In function 'sbox32_hash_with_state':
sbox32_hash.h:1417:20: warning: this statement may fall through 
[-Wimplicit-fallthrough=]
sbox32_hash.h:1267:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1727:9: note: in expansion of macro 'case_24_SBOX32'
sbox32_hash.h:1417:5: note: here
sbox32_hash.h:1272:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1728:9: note: in expansion of macro 'case_23_SBOX32'
sbox32_hash.h:1277:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1729:9: note: in expansion of macro 'case_22_SBOX32'
sbox32_hash.h:1282:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1730:9: note: in expansion of macro 'case_21_SBOX32'
sbox32_hash.h:1287:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1731:9: note: in expansion of macro 'case_20_SBOX32'
sbox32_hash.h:1292:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1732:9: note: in expansion of macro 'case_19_SBOX32'
sbox32_hash.h:1297:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1733:9: note: in expansion of macro 'case_18_SBOX32'
sbox32_hash.h:1302:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1734:9: note: in expansion of macro 'case_17_SBOX32'
sbox32_hash.h:1307:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1735:9: note: in expansion of macro 'case_16_SBOX32'
sbox32_hash.h:1312:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1736:9: note: in expansion of macro 'case_15_SBOX32'
sbox32_hash.h:1317:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1737:9: note: in expansion of macro 'case_14_SBOX32'
sbox32_hash.h:1322:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1738:9: note: in expansion of macro 'case_13_SBOX32'
sbox32_hash.h:1327:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1739:9: note: in expansion of macro 'case_12_SBOX32'
sbox32_hash.h:1332:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1740:9: note: in expansion of macro 'case_11_SBOX32'
sbox32_hash.h:1337:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1741:9: note: in expansion of macro 'case_10_SBOX32'
sbox32_hash.h:1342:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1742:9: note: in expansion of macro 'case_9_SBOX32'
sbox32_hash.h:1347:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1743:9: note: in expansion of macro 'case_8_SBOX32'
sbox32_hash.h:1352:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1744:9: note: in expansion of macro 'case_7_SBOX32'
sbox32_hash.h:1357:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1745:9: note: in expansion of macro 'case_6_SBOX32'
sbox32_hash.h:1362:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1746:9: note: in expansion of macro 'case_5_SBOX32'
sbox32_hash.h:1367:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1747:9: note: in expansion of macro 'case_4_SBOX32'
sbox32_hash.h:1372:39: note: in expansion of macro '_

Smoke [blead] v5.27.2-119-g205ccfbcf5 FAIL(F) linux 4.9.0-3-amd64 [Debian GNU/Linux 9.1 (x86_64/1 cpu[2 cores])

2017-08-08 Thread Carlos Guevara
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
cjg-stretch: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (GenuineIntel 2667MHz) 
(x86_64/1 cpu[2 cores])
onlinux - 4.9.0-3-amd64 [Debian GNU/Linux 9.1 (stretch)]
using cc version 6.3.0 20170516
smoketime 3 hours 13 minutes (average 24 minutes 12 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
F O 
O O -Duse64bitall
O O -Duseithreads
O O -Duseithreads -Duse64bitall
| +- -DDEBUGGING
+--- no debugging


Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Tests skipped on user request:
# One test name on a line
Failures: (common-args) none
[default] 
../t/op/stat.t..FAILED
45-46, 48

Compiler messages(gcc):


Non-Fatal messages(gcc):



-- 
Report by Test::Smoke v1.71 running on perl 5.26.0
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 FAIL(F) linux 4.11.0-1-amd64 [Debian GNU/Linux buster/sid] (x86_64/1 cpu[2 cores])

2017-08-08 Thread Carlos Guevara
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
cjg-buster: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (GenuineIntel 2667MHz) 
(x86_64/1 cpu[2 cores])
onlinux - 4.11.0-1-amd64 [Debian GNU/Linux buster/sid]
using cc version 6.4.0 20170704
smoketime 3 hours 12 minutes (average 24 minutes 5 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
F O 
O O -Duse64bitall
O O -Duseithreads
O O -Duseithreads -Duse64bitall
| +- -DDEBUGGING
+--- no debugging


Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Tests skipped on user request:
# One test name on a line
Failures: (common-args) none
[default] 
../t/op/stat.t..FAILED
45-46, 48

Compiler messages(gcc):


Non-Fatal messages(gcc):



-- 
Report by Test::Smoke v1.71 running on perl 5.26.0
(Reporter v0.053 / Smoker v0.046)


Smoke [blead] v5.27.2-119-g205ccfbcf5 FAIL(F) linux 4.12.4-1-ARCH [Arch Linux] (x86_64/1 cpu[2 cores])

2017-08-08 Thread Carlos Guevara
Automated smoke report for branch blead 5.27.3 patch 
205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc v5.27.2-119-g205ccfbcf5
cjg-arch: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (GenuineIntel 2667MHz) (x86_64/1 
cpu[2 cores])
onlinux - 4.12.4-1-ARCH [Arch Linux]
using cc version 7.1.1 20170630
smoketime 3 hours 10 minutes (average 23 minutes 46 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-119-g205ccfbcf5  Configuration (common) none
--- -
F O 
O O -Duse64bitall
O O -Duseithreads
O F -Duseithreads -Duse64bitall
| +- -DDEBUGGING
+--- no debugging


Locally applied patches:
SMOKE205ccfbcf5eebeeb73bce7d681468bd3e00c4dbc

Testsuite was run only with 'harness'

Tests skipped on user request:
# One test name on a line
Failures: (common-args) none
[default] 
../t/op/stat.t..FAILED
45-46, 48
../dist/Time-HiRes/t/itimer.t...??

[default] -DDEBUGGING -Duseithreads -Duse64bitall
../dist/Time-HiRes/t/itimer.t...??

Compiler messages(gcc):
op.c: In function 'Perl_op_clear':
op.c:1081:29: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:1082:17: note: here
op.c:1087:29: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:1088:17: note: here
op.c:1097:29: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:1098:17: note: here
op.c:1107:29: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:1108:17: note: here
op.c:1114:29: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:1115:17: note: here
op.c:957:28: warning: this statement may fall through [-Wimplicit-fallthrough=]
op.c:959:5: note: here
sbox32_hash.h: In function 'sbox32_hash_with_state':
sbox32_hash.h:1417:20: warning: this statement may fall through 
[-Wimplicit-fallthrough=]
sbox32_hash.h:1267:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1727:9: note: in expansion of macro 'case_24_SBOX32'
sbox32_hash.h:1417:5: note: here
sbox32_hash.h:1272:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1728:9: note: in expansion of macro 'case_23_SBOX32'
sbox32_hash.h:1277:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1729:9: note: in expansion of macro 'case_22_SBOX32'
sbox32_hash.h:1282:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1730:9: note: in expansion of macro 'case_21_SBOX32'
sbox32_hash.h:1287:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1731:9: note: in expansion of macro 'case_20_SBOX32'
sbox32_hash.h:1292:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1732:9: note: in expansion of macro 'case_19_SBOX32'
sbox32_hash.h:1297:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1733:9: note: in expansion of macro 'case_18_SBOX32'
sbox32_hash.h:1302:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1734:9: note: in expansion of macro 'case_17_SBOX32'
sbox32_hash.h:1307:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1735:9: note: in expansion of macro 'case_16_SBOX32'
sbox32_hash.h:1312:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1736:9: note: in expansion of macro 'case_15_SBOX32'
sbox32_hash.h:1317:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1737:9: note: in expansion of macro 'case_14_SBOX32'
sbox32_hash.h:1322:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1738:9: note: in expansion of macro 'case_13_SBOX32'
sbox32_hash.h:1327:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1739:9: note: in expansion of macro 'case_12_SBOX32'
sbox32_hash.h:1332:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1740:9: note: in expansion of macro 'case_11_SBOX32'
sbox32_hash.h:1337:40: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1741:9: note: in expansion of macro 'case_10_SBOX32'
sbox32_hash.h:1342:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1742:9: note: in expansion of macro 'case_9_SBOX32'
sbox32_hash.h:1347:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1743:9: note: in expansion of macro 'case_8_SBOX32'
sbox32_hash.h:1352:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1744:9: note: in expansion of macro 'case_7_SBOX32'
sbox32_hash.h:1357:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1745:9: note: in expansion of macro 'case_6_SBOX32'
sbox32_hash.h:1362:39: note: in expansion of macro '_SBOX32_CASE'
sbox32_hash.h:1746:9: note: in expansion of macro 'case_5_SBOX32'
sbox32_hash.h:1367:39: note: in expansion of mac

Smoke [blead] v5.27.2-109-g13f60a0985 PASS HP-UX B.11.31/64 (ia64/2 cpu)

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
13f60a098562e1ce7ab09819568bb8a03b617a60 v5.27.2-109-g13f60a0985
x2: ia64 (ia64/2 cpu)
onHP-UX - B.11.31/64
using ccache cc version B3910B A.06.28.02
smoketime 9 hours 50 minutes (average 1 hour 13 minutes)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-109-g13f60a0985  Configuration (common) none
--- -
O O O O O O 
O O O O O O -Duse64bitall
O O O O O O -Duseithreads
O O O O O O -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = univ.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = univ.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE13f60a098562e1ce7ab09819568bb8a03b617a60

Testsuite was run only with 'harness'

Passed Todo tests: (common-args) none
[stdio/perlio] 
[stdio/perlio] -DDEBUGGING
[stdio/perlio] -Duse64bitall
[stdio/perlio] -DDEBUGGING -Duse64bitall
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitall
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitall
../dist/Net-Ping/t/450_service.tPASSED
9, 18

[univ.utf8] 
[univ.utf8] -DDEBUGGING
[univ.utf8] -Duse64bitall
[univ.utf8] -DDEBUGGING -Duse64bitall
[univ.utf8] -Duseithreads
[univ.utf8] -DDEBUGGING -Duseithreads
[univ.utf8] -Duseithreads -Duse64bitall
[univ.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2
../dist/Net-Ping/t/450_service.tPASSED
9, 18

Compiler messages(hpux):


Non-Fatal messages(hpux):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.70_01 running on perl 5.14.2
(Reporter v0.053 / Smoker v0.046)


Smoke [5.27.3] v5.27.2-110-g9c6b56d PASS darwin 15.6.0 (Intel Core 2 Duo/)

2017-08-08 Thread tony
Automated smoke report for 5.27.3 patch 
9c6b56dc65cdd9256fbe04a7baf4f085db1c04dd v5.27.2-110-g9c6b56d
neptune.local: iMac (2.4 GHz) (Intel Core 2 Duo/)
ondarwin - 15.6.0 (Mac OS X)
using cc version 4.2.1 Compatible Apple LLVM 8.0.0 (clang-800.0.42.1)
smoketime 8 hours 51 minutes (average 33 minutes 12 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-110-g9c6b56d  Configuration (common) none
--- -
O O O O 
O O O O -Duse64bitint
O O O O -Dusedtrace
O O O O -Dusemorebits
O O O O -Duseithreads
O O O O -Duseithreads -Duse64bitint
O O O O -Duseithreads -Dusedtrace
O O O O -Duseithreads -Dusemorebits
| | | +- PERLIO = perlio -DDEBUGGING
| | +--- PERLIO = stdio  -DDEBUGGING
| +- PERLIO = perlio
+--- PERLIO = stdio


Locally applied patches:
uncommitted-changes
SMOKE9c6b56dc65cdd9256fbe04a7baf4f085db1c04dd

Testsuite was run only with 'harness' and HARNESS_OPTIONS=j3

-- 
Report by Test::Smoke v1.43 build 1271 running on perl 5.18.2
(Reporter v0.035 / Smoker v0.045)

Logs at http://perl.develop-help.com/reports/
Branch: origin/blead
Configuration: default


Smoke [blead] v5.27.2-111-gc8eaeaeca3 FAIL(F) dragonfly 4.8-RELEASE (x86_64/)

2017-08-08 Thread Tomasz Konojacki
Automated smoke report for branch blead 5.27.3 patch 
c8eaeaeca3cef30e45c15e87125a03a0ac0e01f9 v5.27.2-111-gc8eaeaeca3
boettgerilla-pallens.xenu.pl: x86_64 (x86_64/)
ondragonfly - 4.8-RELEASE
using cc version 5.4.1 [DragonFly] Release/2016-08-27
smoketime 5 hours 33 minutes (average 41 minutes 42 seconds)

Summary: FAIL(F)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-111-gc8eaeaeca3  Configuration (common) none
--- -
O O O O 
F F F F -Duselongdouble
F F F F -Duseithreads
F F F F -Duseithreads -Duselongdouble
| | | +- PERLIO = perlio -DDEBUGGING
| | +--- PERLIO = stdio  -DDEBUGGING
| +- PERLIO = perlio
+--- PERLIO = stdio


Locally applied patches:
SMOKEc8eaeaeca3cef30e45c15e87125a03a0ac0e01f9

Tests skipped on user request:
# One test name on a line
Failures: (common-args) none
[stdio] -Duselongdouble
../cpan/Time-Local/t/Local.tFAILED
142, 154-156
Non-zero exit status: 4
../t/op/time.t..FAILED
15-16, 19-20, 29-30

[perlio] -Duselongdouble
../cpan/Time-Local/t/Local.tFAILED
142, 154-156
Non-zero exit status: 4
../t/op/time.t..FAILED
15-18, 31-32

[stdio] -DDEBUGGING -Duselongdouble
../cpan/Time-Local/t/Local.tFAILED
No plan found in TAP output
../lib/Time/gmtime.tFAILED
Bad plan.  You planned 121 tests but ran 21.
../t/op/time.t..FAILED
Bad plan.  You planned 72 tests but ran 14.
Inconsistent test results (between TEST and harness):
../cpan/Sys-Syslog/t/syslog.t... 
... FAILED at test 144

[perlio] -DDEBUGGING -Duselongdouble
../cpan/Time-Local/t/Local.tFAILED
No plan found in TAP output
../lib/Time/gmtime.tFAILED
Bad plan.  You planned 121 tests but ran 21.
../t/op/time.t..FAILED
Bad plan.  You planned 72 tests but ran 0.

[stdio] -Duseithreads
../lib/locale.t.FAILED
453, 460
Inconsistent test results (between TEST and harness):
../cpan/Sys-Syslog/t/syslog.t... 
... FAILED at test 145

[perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
../lib/locale.t.FAILED
453, 460

[stdio] -Duseithreads -Duselongdouble
../cpan/Time-Local/t/Local.tFAILED
142, 154-156
Non-zero exit status: 4
../lib/locale.t.FAILED
453, 460
../t/op/time.t..FAILED
13-14, 17-18, 21-22
Inconsistent test results (between TEST and harness):
../cpan/Sys-Syslog/t/syslog.t... 
... FAILED at test 189

[perlio] -Duseithreads -Duselongdouble
../cpan/Time-Local/t/Local.tFAILED
142, 154-156
Non-zero exit status: 4
../lib/locale.t.FAILED
453, 460
../t/op/time.t..FAILED
15-18, 25-26

[stdio] -DDEBUGGING -Duseithreads -Duselongdouble
../cpan/Time-Local/t/Local.tFAILED
No plan found in TAP output
../lib/Time/gmtime.tFAILED
Bad plan.  You planned 121 tests but ran 21.
../lib/locale.t.FAILED
453, 460
../t/op/time.t..FAILED
Bad plan.  You planned 72 tests but ran 18.

[perlio] -DDEBUGGING -Duseithreads -Duselongdouble
../cpan/Time-Local/t/Local.tFAILED
No plan found in TAP output
../lib/Time/gmtime.tFAILED
Bad plan.  You planned 121 tests but ran 21.
../lib/locale.t.FAILED
453, 460
../t/op/time.t..FAILED
Bad plan.  You planned 72 tests but ran 0.

Compiler messages(dragonfly):
Socket.c: In function 'XS_Socket_pack_ip_mreq_source':
Socket.c:1556:7: warning: variable 'interface' set but n

Smoke [blead] v5.26.0-706-g377a745004 FAIL(X) os/390 25.00 (2964/)

2017-08-08 Thread Yaroslav Kuzmin

Smoke log available at 
https://drive.google.com/file/d/0B5PTttxwo7qAbV9ub19NVE00bTg

Automated smoke report for branch blead 5.27.3 patch 
377a74500444ecdab6e964cb221da54cd6e5ab89 v5.26.0-706-g377a745004
RS12: 2964 (2964/)
onos/390 - 25.00
using c99 version
smoketime 13 hours 43 minutes (average 6 hours 51 minutes)

Summary: FAIL(X)

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.26.0-706-g377a745004  Configuration (common) none
--- -
X X X X -Dusedl
>
> >
> > >
> > > +- PERLIO = perlio -DDEBUGGING
> > +--- PERLIO = stdio  -DDEBUGGING
> +- PERLIO = perlio
+--- PERLIO = stdio


Locally applied patches:
SMOKE377a74500444ecdab6e964cb221da54cd6e5ab89

Tests skipped on user request:
# One test name on a line
Failures: (common-args) none
[stdio] -Dusedl
Inconsistent test results (between TEST and harness):
../t/porting/podcheck.t. 
 FAILED--expected 1440 tests, saw 0
../ext/XS-APItest/t/utf8_warn00.t... .. 
FAILED at test 203
../lib/DBM_Filter/t/encode.t 
... FAILED at test 14

[perlio] -Dusedl
Inconsistent test results (between TEST and harness):
../ext/XS-APItest/t/utf8_warn00.t... .. 
FAILED at test 203
../lib/DBM_Filter/t/encode.t 
... FAILED at test 14
../t/porting/podcheck.t. 
 FAILED--expected 1440 tests, saw 0

[stdio/perlio] -DDEBUGGING -Dusedl
Inconsistent test results (between TEST and harness):
../t/porting/podcheck.t. 
 FAILED--expected 1440 tests, saw 0
../t/re/fold_grind.t 
... FAILED--no leader found
../lib/DBM_Filter/t/encode.t 
... FAILED at test 14
../ext/XS-APItest/t/utf8_warn00.t... .. 
FAILED at test 203

Compiler messages(os390):



--
Report by Test::Smoke v1.6 running on perl 5.24.1
(Reporter v0.052 / Smoker v0.045)

--

Regards,

Yaroslav Kuzmin
Developer C/C++ ,z/OS , Linux
3 Zhukovskiy Street · Miass, Chelyabinsk region 456318 · Russia
Tel:  +7.922.2.38.33.38
Email: ykuz...@rocketsoftware.com
Web: www.rocketsoftware.com

Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ 
Main Office Toll Free Number: +1 877.328.2932
Contact Customer Support: 
https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport
Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - 
http://www.rocketsoftware.com/manage-your-email-preferences
Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy


This communication and any attachments may contain confidential information of 
Rocket Software, Inc. All unauthorized use, disclosure or distribution is 
prohibited. If you are not the intended recipient, please notify Rocket 
Software immediately and destroy all copies of this communication. Thank you.


Smoke [blead] v5.27.2-109-g13f60a0985 PASS HP-UX B.11.23/64 (ia64/2 cpu)

2017-08-08 Thread H.Merijn Brand
Automated smoke report for branch blead 5.27.3 patch 
13f60a098562e1ce7ab09819568bb8a03b617a60 v5.27.2-109-g13f60a0985
x1: Intel(R) Itanium 2 processor/1600 MHz (ia64/2 cpu)
onHP-UX - B.11.23/64
using ccache cc version B3910B A.06.25.02
smoketime 12 hours 7 minutes (average 1 hour 30 minutes)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-109-g13f60a0985  Configuration (common) none
--- -
O O O O O O 
O O O O O O -Duse64bitall
O O O O O O -Duseithreads
O O O O O O -Duseithreads -Duse64bitall
| | | | | +- LC_ALL = univ.utf8 -DDEBUGGING
| | | | +--- PERLIO = perlio -DDEBUGGING
| | | +- PERLIO = stdio  -DDEBUGGING
| | +--- LC_ALL = univ.utf8
| +- PERLIO = perlio
+--- PERLIO = stdio 

Locally applied patches:
SMOKE13f60a098562e1ce7ab09819568bb8a03b617a60

Testsuite was run only with 'harness'

Tests skipped on user request:
lib/Test/Simple/t/utf8.t
Passed Todo tests: (common-args) none
[stdio/perlio] 
[stdio/perlio] -DDEBUGGING
[stdio/perlio] -Duse64bitall
[stdio/perlio] -DDEBUGGING -Duse64bitall
[stdio/perlio] -Duseithreads
[stdio/perlio] -DDEBUGGING -Duseithreads
[stdio/perlio] -Duseithreads -Duse64bitall
[stdio/perlio] -DDEBUGGING -Duseithreads -Duse64bitall
../dist/Net-Ping/t/450_service.tPASSED
9, 18

[univ.utf8] 
[univ.utf8] -DDEBUGGING
[univ.utf8] -Duse64bitall
[univ.utf8] -DDEBUGGING -Duse64bitall
[univ.utf8] -Duseithreads
[univ.utf8] -DDEBUGGING -Duseithreads
[univ.utf8] -Duseithreads -Duse64bitall
[univ.utf8] -DDEBUGGING -Duseithreads -Duse64bitall
../lib/B/Deparse.t..PASSED
2
../dist/Net-Ping/t/450_service.tPASSED
9, 18

Compiler messages(hpux):


Non-Fatal messages(hpux):


Status overview available here: https://smoke.procura.nl/

-- 
Report by Test::Smoke v1.70_01 running on perl 5.14.2
(Reporter v0.053 / Smoker v0.046)


Smoke [5.27.3] v5.27.2-109-g13f60a0 PASS darwin 15.6.0 (Intel Core 2 Duo/)

2017-08-08 Thread tony
Automated smoke report for 5.27.3 patch 
13f60a098562e1ce7ab09819568bb8a03b617a60 v5.27.2-109-g13f60a0
neptune.local: iMac (2.4 GHz) (Intel Core 2 Duo/)
ondarwin - 15.6.0 (Mac OS X)
using cc version 4.2.1 Compatible Apple LLVM 8.0.0 (clang-800.0.42.1)
smoketime 8 hours 59 minutes (average 33 minutes 44 seconds)

Summary: PASS

O = OK  F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during:   - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep

v5.27.2-109-g13f60a0  Configuration (common) none
--- -
O O O O 
O O O O -Duse64bitint
O O O O -Dusedtrace
O O O O -Dusemorebits
O O O O -Duseithreads
O O O O -Duseithreads -Duse64bitint
O O O O -Duseithreads -Dusedtrace
O O O O -Duseithreads -Dusemorebits
| | | +- PERLIO = perlio -DDEBUGGING
| | +--- PERLIO = stdio  -DDEBUGGING
| +- PERLIO = perlio
+--- PERLIO = stdio


Locally applied patches:
uncommitted-changes
SMOKE13f60a098562e1ce7ab09819568bb8a03b617a60

Testsuite was run only with 'harness' and HARNESS_OPTIONS=j3

-- 
Report by Test::Smoke v1.43 build 1271 running on perl 5.18.2
(Reporter v0.035 / Smoker v0.045)

Logs at http://perl.develop-help.com/reports/
Branch: origin/blead
Configuration: default