> r...@150.162.62.61:~# fbset -fb /dev/fb/3 > > mode "720x480-60" > # D: 12.500 MHz, H: 14.863 kHz, V: 59.932 Hz > geometry 720 480 720 480 16 > timings 80000 121 0 16 0 0 0 > bcast true > laced true > nonstd 1 > rgba 0/0,0/0,0/0,0/0 > endmode
I do not know the meaning of all parameters clearly (Any one tell me ?). Today I update the DVSDK to 1.3 . I use the uImage on the host via tftp and use the file system on the host via NFS. When I set the Uboot: setenv bootargs console=ttyS0,115200n8 noinitrd rw ip=dhcp root=/dev/nfs nfsroot=$(nfshost):$(rootpath),nolock mem=120M The Linux is OK but the demo cannot run. When I change to: setenv bootargs video=davincifb:vid0=720x576x16,2500K:vid1=720x576x16,2500K:osd0=720x576x16,2025K davinci_enc_mngr.ch0_output=COMPOSITE davinci_enc_mngr.ch0_mode=$(videostd) console=ttyS0,115200n8 noinitrd rw ip=dhcp root=/dev/nfs nfsroot=$(nfshost):$(rootpath),nolock mem=120M The demo is OK. Uboot parameters can configure the fbdev. spruek9.pdf tell me how to "FBDev Driver Configuration" Good luck. -- Thanks, Zhenfeng Ren _______________________________________________ Davinci-linux-open-source mailing list Davinci-linux-open-source@linux.davincidsp.com http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source